1) Use SolidWorks (SW) FEA to apply a bending load of 600 lbf on the right end of the stepped shaft as shown below. This is the same geometry as H01. Estimate stress concentration factor Kt for bending from your FEA. Provide a hardcopy color plot of your FEA showing maximum von Mises stress.

Answers

Answer 1

Solution :

Given :

L = 1 in

d = 0.75 in

D = 1 in

Fillet radius, r = 0.063 in

[tex]$K_{t_{bending}=\frac{\sigma_{FEA_{bending }}}{\sigma_{Nominal_{bending }}}$[/tex]

We know that :

[tex]$\sigma_{b} = \frac{32M}{\pi d^3}$[/tex]

[tex]$\sigma_{b} = \frac{32 \times (2998.63 \times 25.4)}{\pi (0.75 \times 25.4)^3}$[/tex]

    [tex]$=112.27 \ N/mm^2$[/tex]

[tex]$\sigma_{FEA} = 1.3 \times 10^8 \ N/m^2$[/tex]

         [tex]$=1.3 \times 10^8 \times 10^{-6}$[/tex]

         [tex]$=1.3 \times 10^2$[/tex]   MPa

         = 130 MPa

Therefore, the stress concentration factor is :

[tex]$k_t=\frac{130}{112.27}$[/tex]

   = 1.157922

1) Use SolidWorks (SW) FEA To Apply A Bending Load Of 600 Lbf On The Right End Of The Stepped Shaft As

Related Questions

A sphere of diameter 3.0cm is mounted into a thin uniform wire of diameter 0.2mm calculate the length of the wire in meters​

Answers

Answer:

Length of the wire in meters​ = 0.000628 meter (Approx.)

Explanation:

Given:

Diameter of wire = 0.2 mm

Find:

Length of the wire in meters​

Computation:

Radius of wire = 0.2 / 2

Radius of wire = 0.1

Length of the wire = Circumference of circle

Circumference of circle = 2πr

Length of the wire = 2πr

Length of the wire = 2(3.14)(0.1)

Length of the wire = 0.628 mm (Approx.)

1 meter = 1,000 mm

So,

Length of the wire in meters​ = 0.000628 meter (Approx.)

state the mode by which heat travels from the cube to the balloons​

Answers

Answer:

The face of the cube towards A. is bright and shiny and the face towards B is dull black. State with reason the adjustments that should be made on the distances X1 and X2 so that the rate of change of temperature in both balloons is the same.

Explanation:

Convection is the mechanism by which heat is transferred from the cube to the balloon. Convection is the movement of currents inside a liquid or gas that transfers heat energy.

What is Convection?

Convection is a method of heat transfer in which a fluid or gas, such as air or water, is moved. A hotter liquid or gas loses density and rises, while a colder, denser liquid or gas replaces it by sinking. Convection is the term used to describe the movement of gases or liquids due to temperature differences.

When the cube is heated, the air around it becomes less dense and rises; On the contrary, the cold air from all around fills the space. As a result, heat energy is transferred from the cube to the balloons via convection currents.

Therefore, Convection is the mechanism by which heat is transferred from the cube to the balloon. Convection is the movement of currents inside a liquid or gas that transfers heat energy.

Learn more about Convection, here:

https://brainly.com/question/4138428

#SPJ2

can someone please help me with this question... thank u​

Answers

Answer:

45 degrees

Explanation:

A projectile, in other words, travels the farthest when it is launched at an angle of 45 degrees.

The answer is approximately 9.8m/s on your question

Trong hình dưới, dòng điện I = 10 A rất dài, đặt trong không khí. Những điểm có cường độ từ trường H = 8,0 A/m nằm cách dòng điện một khoảng bao nhiêu cm

Answers

Answer:

bombeees.p lele

Explanation:

trong bon

Vector B has components Bx = 6.18 and By = 4.43. Find the magnitude and direction counter clockwise from the positive x-axis.

Answers

Answer:

Explanation:

The formula for the magnitude of this resultant vector, which is in Q1, btw, is:

[tex]B_{mag}=\sqrt{6.18^2+4.43^2}[/tex] which gives us, to 3 sig fig's:

7.60 m. Since the resultant vector is in Q1, we don't need to add anything to the angle once we find it to 3 sig fig:

[tex]tan^{-1}(\frac{4.43}{6.18})[/tex] gives us an angle of 35.6 degrees

Multiplying a vector with another vector results in what type of answer.

A) a direction
B) a vector
C) either a vector or a scalar
D) a scalar

Answers

multiplication of two vectors yields a vector oroduy

Loops spaced further apart create a stronger electromagnet. True or False

Answers

Answer:

False

Explanation:

Electromagnetic strength is inversely proportional to separation distance

If the radius of the equipotential surface of the point charge is 14.3 m at a potential of 2.20 kV, what will be the magnitude of the point charge that generates the potential?

Answers

Answer:

The magnitude of the point charge is 3.496 x 10⁻⁶ C

Explanation:

Given;

radius of the surface, r = 14.3 m

magnitude of the potential, V = 2.2 kV = 2,200 V

The magnitude of the point charge is calculated as follows;

[tex]V = (\frac{1}{4\pi \epsilon _0} )(\frac{Q}{r} )\\\\V = \frac{KQ}{r} \\\\Q = \frac{Vr}{K} \\\\Q = \frac{2,200 \times 14.3}{9\times 10^9} \\\\Q = 3.496 \times 10^{-6} \ C\\\\Q = 3.496 \ \mu C[/tex]

Therefore, the magnitude of the point charge is 3.496 μC

how can you account for the differences in the entropies of combination of methyl propane (-1465J/mol K) and butane (1465J/mol K)​

Answers

Explanation:

The change in entropy is a measure of temperature. When the temperature of a compound or a system increases, there will be more randomness in the system.

The boiling point is directly related to the number of carbon atoms but is indirectly proportional to the branching in a hydrocarbon.

Butane and methyl propane, both have 4 carbon atoms.

But, butane has 4 carbon atoms in a straight chain while methyl propane has 3 carbon atoms in a straight chain and 1 methyl substituent which makes it a branched hydrocarbon.

Thus, the boiling point of methyl propane will be less than the butane. Likewise, the pattern in entropies will be seen.

A small part of a current loop consisting of a very, very large triangular conductor in the x-y plane is shown below, with the current i=39.30 A.



12 10 4 2 1 0 1 2 3 4 5 6 7 8 9 10 11 12 x (cm)



Calculate the magnitude of the B-field at point 'p'.

Answers

Answer: hello your question is poorly written attached below is the well written question

answer: 4.9 * 10^-5 T

Explanation:

Current ( i ) = 39.30 A

Determine the magnitude of the B-field at Point P

Mag of B-field at Point P = μo*I / 2π*r --- ( 1 )

where : I = 39.30 , μo = 4π * 10^-7 , r = 8*10^(-2)

Input values into equation 1

( 10^-7 * 39.30 ) / ( 8*10^-2 )

Mag of B-field = 4.9 * 10^-5 T

Which of the following statements is true about electric circuits?

• in a series circuit, the voltage at the source is the same as the voltage measured at each load in the circuit

• when 2 dry cells are connected in series, the positive electrode of one cell is connected to the positive electrode of the other

• electrons leave the source at the positive electrode

• lights in the home are connected in series

• in a parallel circuit the current value from the source is equal to the sum of the current values in each branch of the circuit

Answers

Answer:

Explanation:

E: True. The last one is the true statement.

D: False: If home lights were connected in series, when you turned one of them off, they all would go off.

C: The opposite is true. Electrons flow towards the positive pole of a battery. Just as with people, opposites attract.

B: False. What is being described is a parallel circuit. In a series circuit. the positive pole of one battery is connected to the negative pole of the next battery. The other end of each battery is connected to the load.

A: False. There is a voltage drop on each load in series. These drops add together to equal the source voltage.

The two waves shown here are the same distance from point X and are traveling toward each other.

An illustration with a crest 2.0 centimeters high traveling to the right and a second 2.0 centimeters trough traveling toward the left toward point X in the material.
What is the amplitude of the resulting wave when the two waves meet at point X?

0.0 cm
1.0 cm
2.0 cm
4.0 cm

Answers

Answer:

(C) on edge.

Explanation:

Answer:

2.0

Explanation:

trust the process.

what is current and si unit

Answers

Answer:

The SI unit of current is ampere which measures the flow of electric charge across a surface at the rate of one coulomb per second.

A massive truck collides with a less massive car. The force experienced by the truck is ____________ (less than, equal to, greater than) the force experienced by the car. The resulting acceleration of the truck is ____________ (less than, equal to, greater than) the resulting acceleration of the car.
Please answer ASAP

Answers

Answer:

equal to; less than

Explanation:

newtons 3rd law says that all forces have equal and opposite reactions so it would be equal to for the first one. but the acceleration depends on the mass of the object and because the truck is more massive, the acceleration would be slower, or less than.

Which of the following statements about
evaporation is FALSE?

a) Evaporation occurs at room
temperature only.
b) Evaporation requires heat energy
and causes cooling.
c) Evaporation occurs only at the
surface.
d) In evaporation the faster molecules
escape the liquid.

Answers

a) Evaporation occurs at room

temperature only.

Reason: Evaporation occurs at each and every temp. because of the molecules of the solution have kinetic energy than the others, and thus they will evaporate leaving them behind.

Which variable is represented by the following symbol? ∑F
a. Normal Force
b. Applied Force
c. Weight
d. Net Force

Answers

Answer:

d.Net force

Explanation:

The net force is the force which is the sum of all the forces acting on an object simultaneously.

A proton is moving toward a stationary charged particle. Which statement correctly describes an energy change that could occur as the particles get closer?

Answers

Answer:

Kinetic energy will be converted into electric potential energy if the stationary particle is positive.

Can some one help me in this one :)

Answers

Answer:

The apple

Explanation:

Potential energy can be defined as an energy possessed by an object or body due to its position.

Mathematically, potential energy is given by the formula;

[tex] P.E = mgh[/tex]

Where,

P.E represents potential energy measured in Joules.

m represents the mass of an object.

g represents acceleration due to gravity measured in meters per seconds square.

h represents the height measured in meters.

Basically, the potential energy of any physical object is directly proportional to the mass and height of the object. Thus, an increase in either the mass or height of an object would cause an increase in the potential energy possessed by the object.

Hence, an apple weighing 4 ounces would have more potential energy than a cherry that weighs 1 ounce.

can someone please please helppp... thank u <3​

Answers

Answer:

uniformly accelerated motion

#CARRY ON LEARNING

#IM 100% SURE

#MARK ME AS BRAINLIEST

If youre walking from point a to b, the magnitude of your displacement will always be equal or less than or greater than your distance?

Answers

The magnitude of your displacement can be equal to the distance you covered, or it can be less than the distance you covered.  But it can never be greater than the distance you covered.

This is because displacement is a straight line, whereas distance can be a straight line, a squiggly line, a zig-zag line, a line with loops in it, a line with a bunch of back-and-forths in it, or any other kind of line.

The straight line is always the shortest path between two points.

In what direction does the force of friction act?
A. Perpendicular to the surface, pointing up
B. Perpendicular to the surface, pointing down
C. Along the surface, in the direction opposite to the motion
D. Along the surface, in the same direction as the motion

Answers

The answer should be C
The Correct answer is c

When the foil is negatively charged, will all of the foil still be made up of aluminum atoms?

Answers

Answer:

the answer is yes

Explanation:

because the aluminium can still pass current

When the foil is negatively charged, still all of the foil is  made up of aluminum atoms as it has electrons present in it.

What is an atom?

An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.

The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.

Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.

Learn more about atom,here:

https://brainly.com/question/13654549

#SPJ2

5. What type of chemical reaction is shown?
1 point
2 AgNO3 + CuCl2
-
2 AgCl + 2 Cu(NO3)2
Synthesis
Decomposition
Singe Replacement
Double Replacement
Combustion

Answers

Answer:

double Replacement

Explanation:

The mutual replacement of radical and ions between the two compounds or molecules is called double replacement.

General equation : AB+CD = AD +B

can someone please help me with this. thank u ❤️​

Answers

answer:projectile motion

Explanation:

Since gravity acts vertically, there is no acceleration in the horizontal (x) direction. This special type of two-dimensional motion is called projectile motion.

Answer:

.......................

match the given circuit parts to their appropriate functions. write only the letter of the correct answer on your paper

1.source a.an appliance/device that uses electricity
2.switch source like bulbs,computers.
3.wire b.it is a safety device made from materials
4.load that easily melt even before the wires
5.fuse carry too much current.
c.it is where electricity came from like
batteries and generators.
d.it is the pathway of electricity from the
resources to the load .
e.it controls the flow of electricity from the
source. it is used to turn on/off a load.

Answers

Answer:

a. Load.

b. Fuse.

c. Source.

d. Wire.

e. Switch.

Explanation:

An electric circuit can be defined as an interconnection of electrical components which creates a path for the flow of electric charge (electrons) due to a driving voltage.

Generally, an electric circuit consists of electrical components such as resistors, capacitors, battery, transistors, switches, inductors, fuse, etc.

Matching the given circuit parts to their appropriate functions, we have;

a. Load: an appliance or device that uses electricity source like bulbs, computers, television, radio, etc.

b. Fuse: it is a safety device made from materials that easily melt even before the wires carry too much current.

c. Source: it is where electricity came from like batteries and generators.

d. Wire: it is the pathway of electricity from the resources (source) to the load.

e. Switch: it controls the flow of electricity from the source. It is typically used to turn ON or turn OFF a load.

In a wire, when elongation is 4 cm energy stored is E. if it is stretched by 4 cm,
then what amount of elastic potential energy will be stored in it?
plz don't spam
answer fast in imp

Answers

Answer:

4E

Explanation:

From the question given above, the following data were obtained:

Initial elongation (e₁) = 4 cm = 4/100 = 0.04 m

Initial energy (E₁) = E

Final elongation (e₂) = 0.04 + 0.04 = 0.08 m

Final energy (E₂) =?

The energy stored in a s spring is given by:

E = ½Ke²

Where

E => is the energy

K => is the spring constant

e => is the elongation

From:

E = ½Ke²

Energy is directly proportional to the elongation. Thus,

E₁/e₁² = E₂/e₂²

With the above formula, we can obtain the final energy as follow:

Initial elongation (e₁) = 0.04 m

Initial energy (E₁) = E

Final elongation (e₂) = 0.08 m

Final energy (E₂) =?

E₁/e₁² = E₂/e₂²

E / 0.04² = E₂ / 0.08²

E / 0.0016 = E₂ / 0.0064

Cross multiply

0.0016 × E₂ = 0.0064E

Divide both side by 0.0016

E₂ = 0.0064E / 0.0016

E₂ = 4E

Therefore, the final energy is 4 times the initial energy i.e 4E

Please help me :))

Which golf ball would hit the surface with the greatest impact: a ball that fell one meter above the surface of the Earth or a ball that fell one meter above the surface of the Moon?

Answers

Answer:

the one above the surface of earth

Explanation:

earth has gravity the ball of the moon would float away

Two resistors, R1 = 25.0 ohms and

R2 = 64.0 ohms, are connected in

parallel. R1 has a 0.200 A current

flowing through it. What is the current

through R2?

Domomhor resistors in norollal

Answers

Answer:

The current through R2 is 0.078125 amperes.

Explanation:

Ohm's law is the relationship between electrical conductors and their resistance, which establishes that the current that passes through the conductors is proportional to the voltage applied to them.

Ohm's Law relates the magnitudes of voltage, resistance, and intensity as follows:

V=I*R

where V is the electric potential in volts, I is the current in amperes, and R is the resistance in ohms.

R1 has a 0.200 amperes current  flowing through it and a resistante of 25 ohms.

So:

V=0.200 amperes* 25 ohms

Solving:

V=5 volts

Now, for resistance R2 you know the value of the voltage (5 volts) and the value of its resistance R2 = 64 ohms. So:

5 volts= I* 64 ohms

Solving:

[tex]I=\frac{5 volts}{64 ohms}[/tex]

I= 0.078125 amperes

The current through R2 is 0.078125 amperes.

Answer:

the current through R₂ is 0.078 A

Explanation:

Given;

resistance of the first resistor, r₁ = 25 ohms

resistance of the second resistor, r₂ = 64 ohms

current through the first resistor, I₁ = 0.2 A

The voltage passing through each resistor is constant since they are connected parallel to each other.

V = I₁R₁ = I₂R₂

[tex]I_2 = \frac{I_1R_1}{R_2} \\\\I_2 = \frac{0.2 \times 25}{64} \\\\I_2 = 0.078 \ A[/tex]

Therefore, the current through R₂ is 0.078 A

A 750 kg car moving at 25 m/s has Kinetic Energy. To stop the car requires work. On snowy roads, the force of friction that can
stop a car reduces to only about 725 N.
a. How much work must be done to stop the car? (Hint: What is the car's kinetic energy?)
b. How far will the car travel before stopping if the only force stopping it is friction between the tires and the road?

Answers

a. By the work-energy theorem, the total work required to stop the car is equal to the change in its kinetic energy,

W = 0 - 1/2 (750 kg) (25 m/s)² ≈ -230 kJ

b. The car covers a distance x as it stops such that

W = (-725 N) x   ==>   x320 m

in what ways water helps in germination?​

Answers

Answer:

Water can spread germs through bacteria.

Explanation:

Bacteria can live in water and can spread to new locations when water is moved.

Other Questions
In which generation microprocessor was developed short answer of computer science A rod of 3.0-m length and a square (2.0 mm X 2.0 mm) cross section is made of a material with a resistivitYof 6.0 X 10-8 m. If a potential difference of 0.60 V is placed across the ends of the rod, at what rate is heat generated in the rod in watt.Select one:a. 24b. 12c. 4d. 8 The English philosopher John Locke believed that people had natural rights, including the right to life, liberty, and1. the pursuit of happiness2. justice3. religious freedom4. property What was one goal of the Populist Party?O A. The establishment of Grange Halls in every cityB. A lower number of immigrants allowed into the United StatesC. Getting the federal government to embrace the gold standardO D. The establishment of a national bank that would make low-interestloans to farmers. Two water-slide riders, A and B, start from rest at the same time and same height, h but on differently shaped slides.Required:a. Which rider is traveling faster at the bottom? b. Which rider makes it to the bottom first? Ignore friction and assume both slides have the same path length. What region(s) of the world Europe, Asia, Africa, or the Middle East had the most power in 1600, 1750, and 1900? PLEASE PLEASE HELP ME! thank you so so muchexplaining your answer = brainliest/five stars The radius of a circle is 4 kilometers. What is the area of a sector bounded by a 135 arc?give the exact answer in simplest form In what two ways were the Crusades considered successful? Select the sentence that uses negatives correctly.OA. Chris don't have any money for the fair.B. Lawrence could not handle to see the dog in pain.OC. The whole region hasn't had no rain in a while.OD. Edith and Robin aren't going to no mall today.Need answer please. Hi, can anyone draw me an isometric image of this shape? solver for x, trigonometric ratios (y=179x(y=105x+2046Solve using elimination method and graph plss Helpppp What stage of photosynthesis usescarbon dioxide to make glucose?A. Light reactionsB. Calvin CycleC. ATP synthesisD Cellular respiration Decide la ubicacin de cada verbo segn el significado.Si yo fuera a Espaa, yo ____ muchas cosas durante el viaje. Yo ____ todos los das a comer tapas y ____ probar la paella y una tortilla espaola. Yo ____ visitar muchos castillos y ____ que sacar muchas fotos de todo. Al regresar a casa, _____ a visitar a mi familia y les ____ a todos lo mucho que disfrut.Word Bank:podaradiratendravendraquerraharasaldra mwakilembe Co.ltd is a micro business which buys and sell toys on 1 January 2020 the company predicted its annual sales to be 1000000 units. Each order would cost the company TZS 80 . The company pays TZS 160 per unit of a product. Estimated inventory carrying costs are 25 percent of inventory value. Establish the EOQ units. Factor this polynomial.-3x2 - 16x-5A. (3x - 1)(x - 5)B. (-3x + 1)(x + 5)C. (3x + 1)(x - 5)D. -1(3x + 1)(x+5) The Allowance for Bad Debts account had a balance of $10,600 at the beginning of the year and $12,200 at the end of the year. During the year (including the year-end adjustment), bad debts expense of $18,800 was recognized. Required: Calculate the total amount of past-due accounts receivable that were written off as uncollectible during the year. (Hint: Make a T-account for the Allowance for Bad Debts account, plug in the amounts that you know, and solve for the missing amount.) Bad debt write-offs _________ Which of the following questions applies the strategy of comparing and contrasting? A. When did the civil rights era really begin? B. How did soldiers in the Civil War feel about their jobs? C. What were the economic effects of the Cold War in the Soviet Union? D. Have some religions been more involved in religious wars than others? Find the perimeter and total area of the composite shape shown below. All measurements are given in inches. Used 4 4 4 4 inside 8 8 formulas used. This is amap.10)Each dot representsWhich of these regions is the most densely populated?