3. A museum curator moves artifacts into place on various different display
surfaces. Use the values in Table 2 to find Fs,max and Fx for the following
situations:
a. moving a 145 kg aluminum sculpture across a horizontal steel platform
b. pulling a 15 kg steel sword across a horizontal steel shield
c. pushing a 250 kg wood bed on a horizontal wood floor
d. sliding a 0.55 kg glass amulet on a horizontal glass display case
"

The weight that will register on the scale beam is 1121 N.

The weight of an object is a measure of the force of gravity acting on a body on the earth's surface.

The weight of an object is calculated as follows:

The unit of weight is Newtons.

Considering the data given:

The weight of the lower tank is 224 N

The weight of the water in the tank is 897 N

Total weight of the tank and the water = 224 + 897 = 1121 N

This will be the total weight that will register in the scale beam.

Learn more about weight at: https://brainly.com/question/8935213

#SPJ1

Answer:

Biologist >

Explanation:

A biologist is a scientist who examines organisms that are alive.

:)

Yes, Speed is the magnitude of its velocity.

What is speed?
Speed is a scalar, while velocity is a vector (just a number). A velocity, on the other hand, has both a direction and a magnitude. As previously stated, the magnitude of the velocity is referred to as the speed.

The speed of a moving object is the distance it travels in a given amount of time.

The distance travelled divided by the time gives the average speed of an object in a given time. The speed of an object is defined as the distance travelled per unit of time. When the speed of an object changes, it becomes faster or slower. When the speed of an object increases, this is referred to as acceleration. Deceleration, also known as negative acceleration, occurs when an object slows down as its speed decreases.

To learn more about Speed the given link:
brainly.com/question/28224010
#SPJ10

Answer:

100 Ncm or 1 Nm

How to do:

Given:

Displacement (d): 20cm

Force (F): 5N

Want:

Work: ???

Equation:

W = Fd

Solve:

W = Fd

W = 5N x 20 cm

W = 100 Ncm

If you want it in meters (standard unit), just do unit conversions:

1 cm = 1 m/100 cm

20cm x 1 m/100 cm = 20/100 = 0.2m

W = 5N x 0.2m = 1 Nm

The car’s average acceleration is 3m/s².

What is the Car's average acceleration?

The average acceleration in the question measures the change in the velocity of the car by the time it used to cover the distance.

Average acceleration of the car is the change in the velocity of the car by the change in the time the car traveled.

ΔVelocity = 4.5m/s -( -3.0m/s)

                = 7.5m/s

The initial velocity is negative 3.0m/s as the car started  moving  backwards.

The time is 2.5s

The

The average acceleration of the car = 7.5m/s ÷ 2.5s

                                                            = 3m/s²

In summary, the car coasting backward downhill at an initial speed of 3.0 m/s would have an average acceleration of  3m/s² After increasing the speed to 4.5 m/s at a time of 2.5s.

Learn more about  average acceleration here: https://brainly.com/question/104491

#SPJ1

Water has the highest specific heat capacity.

The specific heat capacity is measured in J/(kg K) or J/(kg °C), and it is the amount of heat (J) absorbed per unit mass (kg) of the material when its temperature rises by 1 K (or 1 °C).

Applications of water with highest specific heat capacity​ are:

To know more about specific heat visit the link:

https://brainly.com/question/11297584?referrer=searchResults

#SPJ1

Mercury, Venus , Mars , Jupiter and Saturn are much seen planets.

What is planets ?

A planets is a body that is in orbit around the sun has sufficient Mars for it's self-gravity to overcome rigid body forces so that it assumes nearly round shape.

In simple words we can say any of the large bodies that revolve around the sun in the solar system called planet.

The current count orbiting our star there are eight planet but earth, mercury, Venus , Jupiter and Mars are much visible .

So,

At certain times of the year these 5 planets can be seen from earth .

To know more about planets click -

https://brainly.com/question/1286910

#SPJ9

Answer:B is the answer

Explanation: So the paint change color in liquid it means it dissolved in the water

There is potential energy that is preserved in a trebuchet.

Potential energy is a form of energy that is stored but is dependent on the relative positions of different system components. Stretching or compressing a spring increases its potential energy. A steel ball has more potential energy when it is raised above the surface of the earth than when it is brought to Earth.

potential energy

The counterweight in a trebuchet contains a lot of potential energy because it is quite heavy. Although energy cannot be produced or destroyed, it can take on several forms. The lifted counterweight's potential energy is converted into kinetic energy, or the energy of motion, as it is released and starts to descend.

To know more about potential energy visit :-

https://brainly.com/question/15764612

#SPJ10

According to the given information A support force that completely balances the weight of an object at rest.

The normal force is another name for a support force. With the same amount of power as the book's downward weight, the table pushes up on the book. A support force—the upward force that balances an object's weight on a surface—holds the book steady on the table.

Pull force attributed to another item, such as "Pull attributed to Steve." The force here is identical to the push force, but it is directed at the thing that is pulling. Support force resulting from the ground (or from the object's surface): When two solid surfaces come in contact with one another, support force arises.

To know more about Support force visit:

https://brainly.com/question/13743040

#SPJ13

The complete question is -

What is a support force ?

The kinematic equation should you use if you are trying to solve for time, but do not know displacement is v[f] = v[o] + at.

Kinematics is the branch of mechanics concerned with the motion of objects without reference to the forces which cause the motion.

Given are the equations of motion.

If the displacement is not given, then we can solve for time using the first equation of motion given by -

v[f] = v[o] + at

In this equation, there is no term involving displacement. We can solve for time as follows -

v[f] = v[o] + at

v[f] - v[o] = at

t = (v[f] - v[o])/a

Therefore, the kinematic equation should you use if you are trying to solve for time, but do not know displacement is v[f] = v[o] + at.

To solve more questions on Kinematic equations, visit the link below-

https://brainly.com/question/28712225

#SPJ1

The situation provided to us is a metaphor for Newton's first law of motion.

Newton's law of motion consists of three laws for the motion of a body, Where Newton's first law of motion states that An object at rest remains at rest, and an object in motion remains in movement at a steady speed and in a straight line unless acted on by an unequal force. Newton’s first law states that each object will stay at rest or in uniform motion in a straight line unless compelled to alter its state by the action of an outside drive. This tendency to stand up to changes in a state of motion is inertia. On the off chance that all the outside strengths cancel each other out, then there's no net drive acting on the object. In case there's no net constraint acting on the object, at that point the object will keep up a consistent speed.

To know more about newton's law of motion refer to the link  https://brainly.com/question/974124?referrer=searchResults.

#SPJ1

For nuclear meeting It should be used on a school bus driver's handle. Adapt to the outcome this couple force into a couple moment occurred to be that implies that we must act now to find a better situation.

Open to a nuclear meeting It is intended to be used on a school bus driver's handle. respect the outcome This couple of forces occurred to be in a couple at this time. That suggests that at this moment, we need to discover a better situation and start acting.

And at this time, 400 people are throwing up. Toe in toe is what is known as a couple of forty meters. As the radius of the handle is 30 millimeters in this instance, you can translate it to meters and use the force to draw up on a spot rather four upon it. Are you in favor of addressing this issue? 1 33 nuclear will be Therefore, one till people comprehend that is supposed f.

Now, we must determine a slow speed consent business. Once more, a boardroom mingled. I am. Carletto is a PVR as well. In contrast to the original five meters, Cal critic M is supplied four on a separated radius of five millimeters.

To know more about nuclear click on the link:

https://brainly.com/question/13869748

#SPJ4

The electric force between the two charges is 1.6 x 10¹⁶ N  and it attractive.

The electric force between the charges is determined by applying Coulomb's law of electrostatic force as shown below.

F = kq₁q₂/r²

where;

F = (9 x 10⁹ x 200 x 800) / (0.3²)

F = 1.6 x 10¹⁶ N

Thus, the electric force between the two charges is 1.6 x 10¹⁶ N  and it attractive.

Learn more about electric force here: https://brainly.com/question/17692887

#SPJ1

An artificial satellite can be called a celestial body as it orbits around a planet.

Objects in space such as the sun, moon, planets, and stars are known as celestial bodies or heavenly bodies. Satellites are revolving bodies that orbit planets. They are the fundamental component of celestial bodies. These could be transmitted by humans or be of natural origin.

The moon orbits the earth as a natural satellite because it is held in place by the gravity of the planet. Additionally, man has positioned artificial or man-made satellites in orbit around the earth and other planets for communication and scientific research.

As a artificial satellite also orbits around a natural celestial body, it can be called as a celestial body.

To know more about planets, refer to the following link:

https://brainly.com/question/17744906

#SPJ9

A time of "solar maximum" (or "solar max") is when the number of sunspots peaks, whereas a time of "solar minimum" is when they are few (or "solar min").

Every year, a different amount of sunspots are seen on the "surface" of the Sun. This cycle, which has an average duration of about eleven years, explains the rise and decline in sunspots counts. The "Sunspot Cycle" is the term used to describe the cyclical change in sunspot counts that was first observed in 1843 by German amateur astronomer Samuel Heinrich Schwabe. A time of "solar maximum" (or "solar max") is when the number of sunspots peaks, whereas a time of "solar minimum" is when they are few (or "solar min").

A recent sunspot cycle, for instance, lasted from the solar minimum in 1986, when 13 sunspots were observed, to the solar max in 1989, when more than 157 sunspots surfaced, and on to the subsequent solar minimum in 1996 (ten years after the solar minimum in 1986), when the number of sunspots had decreased to less than 9.

Through the course of the sunspot cycle, both the quantity and location of sunspots change. Sunspots typically start to emerge around a latitude of 15° closer to the equator as the solar cycle advances through solar max. Sunspots begin to appear relatively close to the solar equator, at about 7° North and South latitude, as the cycle comes to an end and solar min is once again approaching.

Around solar min, when sunspots of the current cycle are forming at low latitudes and sunspots of the next cycle are starting to form at high latitudes once more, there is frequently an overlap in this latitudinal migration tendency. Spörer's Law is the name given to the progressive equatorward drift of sunspots that occurs throughout the sunspot cycle and was originally observed in the early 1860s by the German astronomer Gustav Spörer and the Englishman Richard Christopher Carrington. Another English astronomer, Edward Walter Maunder, created the first "butterfly diagram" in 1904, which was a pictorial representation of this trend in sunspot migration.

To know more about sunspots click on the link:

https://brainly.com/question/13969679

#SPJ4

The change in temperature of the resistance wire is 500 K.

We need to know about the resistance of conductive material to solve this problem. Resistance can be defined as the ratio of the voltage applied to the current flow It can be written as

R = V / I

where R is resistance, V is voltage and I is current.

From the question above, the given parameters are

I2 = 20% I1

ɑ = 0.0004

Find the final resistance in the same voltage

R2 / R1 = (V2 / I2 )/ (V1 / I1)

R2 / R1 = 0.2 I1 / I1

R2 = 0.2 R1

As we know that the temperature dependence of resistance is

R2 = R1 . ɑ . ΔT

0.2 R1 = R1 . 0.0004 . ΔT

ΔT = 500 K

Find more on resistance at: https://brainly.com/question/17563681

#SPJ4

The hydrogen atom can use the Rydberg equation to determine the energy of light emitted or absorbed. When electrons are raised from a lower energy level to a higher energy level, light is absorbed. When electrons relax from a higher energy level back down to a lower energy level, light is released.

To learn more about Transition of electron refer to:

https://brainly.com/question/28269146

#SPJ4

Answer:

See below

Explanation:

CALCULATED volume from their measurements:

5.08 X 5.09 X 5.10 = 131. 9   cm^3

( I think you my have the "The actual volume of the block was 15.3 cm3" incorrectly posted)

(131.9 - 15.3) / 15.3     x 100 % =  762 %  error !!!!!

Because the planets formed from a disk of material that enveloped the Sun during the Solar System's formation, their orbits are coplanar.

Because the planets formed during the formation of the Solar System from a disk of dust that enveloped the Sun, their orbits are coplanar. The planets all formed in a plane because that disk of dust was a disk that was all in a plane.

Astronomy frequently deals with rings and disks. Any initial, minute rotation of the cloud is amplified by the conservation of angular momentum during cloud collapse.

It is the maximum balance between gravitational collapse and the centrifugal force produced by rapid spin as a cloud spins faster and faster before collapsing into a disk. Coplanar planets, the thin disks of spiral galaxies, and the accretion disks of black holes are the end results.

All of the planets are almost in the same plane with some degree of shift because of the spinning of the disc during the early stages of the solar system's formation, when a large disc of matter was revolving around the sun. Due to gravitational forces, the matter gravitated together and planets were formed.

To know more about solar system click on the link:

https://brainly.com/question/18365761

#SPJ4

The acceleration caused by gravity, or 9.81 m/s², which acts on the object, causes the projectile's vertical velocity to vary.

A projectile's horizontal velocity is constant (a never changing in value), Gravity causes a downward vertical acceleration with a magnitude of 9.8 m/s/s. A projectile's vertical velocity fluctuates by 9.8 m/s per second, A projectile's vertical motion exists unrelated to its horizontal motion.

The acceleration caused by gravity, or 9.81 m/s², which acts on the object, causes the projectile's vertical velocity to vary. Therefore, this choice is likewise false. As is common knowledge, an object's vertical velocity is not constant, and momentum is a function of velocity.

To learn more about vertical velocity refer to:

https://brainly.com/question/5619273

#SPJ13

The values of velocity at point  A,C,E and G is 15m/s, the values of velocity at point B, D, F and H is 10m/s, 20m/s, 30m/s and 40m/s respectively.

The projectile is launched from the top of the cliff with a horizontal velocity of 15m/s.

Throughout the motion of the projectile the velocity will have two components. On along vertical and one along horizontal.

Here, the direction of the acceleration is only downwards because only gravity is there and that in only downwards direction.

There is no acceleration in the horizontal direction. So, the velocity in the horizontal direction will never change.

So, the velocity at A,C,E and G is 15m/s throughout the motion.

We know that,

t = √(2h/g)

h = 1/2gt²

Where,

H is height of the cliff at that point,

t is the time,

g is gravity which is equal to 10m/s².

So, the height at point,

B is 1/2(10)(1)² = 5m

D is 1/2(10)(2)² = 20m

F is 1/2(10)(3)² = 45m

H is 1/2(10)(4)² = 50m.

The vertical velocity can be found by using the formula,

V = √2gh

So, vertical velocity at point,

B is √2(10)(5) = 10m/s.

D is √2(10)(20) = 20m/s.

F is √2(10)(45) = 30m/s.

H is √2(10)(80) = 40m/s.

To know more about Projectile, visit,

https://brainly.com/question/24949996

#SPJ9

A force is a power that has the ability to alter an object's motion. A force can modify, or accelerate, the velocity of a mass-containing object. Intuitively, pushing or pulling can be used to describe force. As a vector quantity, a force is one that has both magnitude and direction.

The definition of magnitude is simply "distance or quantity." It displays an object's size, direction, or motion in absolute or relative terms. It is employed to indicate the size or scope of something.

The two main categories into which forces can be separated are: Forces in contact. Non-contact forces

A force can be appropriately described as a push or a pull. A force is not something an object "has in it" or that it "contains." One thing experiences a force from another.

F = m * a kgm/s2 in SI base units

F = 10 * 5 = 50 N

To know more about force calculation, click on the link below:

https://brainly.com/question/12785175

#SPJ9

Answer:

x = x0 + v0 t + 1/2 a t^2

The question asks for distance traveled in 1 sec

x0 = 0

v0 = 0

This leaves

x = 1/2 a t^2

x = 1/2 * 9.8 /s^2 * 1 s^2 = 4.9 m

The balloon will fall 4.9 m in the first second.

Answer:486.1 J

Explanation:

Answer:

400 Newtons or 40 kg

Explanation:

The gravitational force in Newtons of a body of mass mkg on the surface of the earth is given by the equation

[tex]F_e = G\dfrac{mM_e} {r_e^2}[/tex]

where [tex]F_e[/tex] is the magnitude of the gravitational force on earth

m the mass of the object and [tex]M_e[/tex] the mass of the earth and [tex]r_e[/tex] the radius of the earth

G is the universal gravitational constant which is the same throughout the universe

On Mars, the gravitational force for the same object would be:

[tex]F_m = G\dfrac{mM_m} {r_m^2}[/tex]

Since it is given that
[tex]M_m = \dfrac{1}{9}M_e[/tex]

and

[tex]r_m = \dfrac{1}{2}r_e[/tex]

we can rewrite [tex]F_m[/tex] in terms of [tex]F_e[/tex]

[tex]F_m = G\dfrac{m\dfrac{M_{e}}{9}}{\left(\dfrac{r_{e}}{2}\right)^{2}}[/tex]

[tex]\dfrac{4}{9} \;G\dfrac{mM_{e}}{\left(r_{e}\right)^{2}} =\dfrac{4}{9} F_e\\\\= \dfrac{4}{9} \cdot 900 = 400\;N[/tex]

Since F = mg where g = 10 m/s^2

m = F/g = 400N/10m/s² = 40 kg

Answer:

Approx 50 atm

Explanation:

See graph below:

If a  book of mass 0.4 kg is pushed to the left across a table with a force of 2.4 N. Kinetic friction provides a force of magnitude 0.8 N, then the normal force acting on the book would be 3.92 Newtons.

Friction is a type of force that resists or prevents the relative motion of two physical objects when their surfaces come in contact.

As given in the problem If a  book of mass 0.4 kg is pushed to the left across a table with a force of 2.4 N. Kinetic friction provides a force of magnitude 0.8 N,

The normal force = m × g

                             =  0.4 × 9.8

                             = 3.92 Newtons

Thus, the normal force acting on the book would be 3.92 Newtons.

Learn more about friction here, refer to the link;

brainly.com/question/24186853

#SPJ1

Answer:

Hope the picture will help

Option a if no air resistance is present, during the fall there will be a decrease gravitational potential energy in the drives.

Resistance is the characteristic of an electric circuit or a component of an electric circuit that converts electrical energy into thermal energy when an electric current is present in the opposite direction. The current-carrying charged particles that make up the conductors' structure collide with fixed particles during resistance. Resistance is frequently thought of as being confined in objects like lamps, heaters, and resistors where it predominates, despite the fact that it is a property of all circuit components, including connecting wires and electric transmission lines. Resistance is the degree to which a substance obstructs or opposes an electric current.  Consider the example of a person battling to go from one stop to another in a crowded market to better understand resistance.

Learn more about resistance here:

https://brainly.com/question/11431009

#SPJ4