7
The periodic table displays
A.
only the important compounds that exist in the world.
OB.
all of the known compounds that exist in the world today.
C.
only the important elements that exist in the world.
D.
all of the known tements that exist in the world today.

Answers

Answer 1
D. All the known elements that exist in the world today

Related Questions

A grindstone in the shape of a solid disk has a shaft attached to allow a force to be exerted on. The grindstone has a diameter of 0.650m and a mass of 55.0 kg. The shaft is 0.300 m from the center of the stone and has a mass of 4.00 kg. The grindstone has a motor attached and it is rotating at 450rev/min at a run when the motor is shut off. The grindstone comes to rest in 9.50 s.
a. What is the moment of inertia of the grindstone including the shaft?
b. What is the angular acceleration of the grindstone?
c. What average torque is done by friction to bring the grindstone to rest?
d. How many revolutions has it taken the grindstone to come to rest?
e. What is the linear acceleration of the shaft in this process?
f. What is the linear distance that the shaft traveled?

Answers

Answer:

a)  3.265 kg-m^2

b)  - 4.96  rad/s^2

c) 16.1944 N-m

d) 35.625

e)  - 1.488 m/s^2

f)  67.1175 m.

Explanation:

Given data:

Diameter of grindstone ( D ) = 0.650 m ,  Radius ( R ) = 0.325 m

mass of grindstone ( M ) = 55 kg

Radius of shaft ( r ) = 0.300 m

mass of shaft ( m ) = 4 kg

Initial Angular velocity = 450 rev/min = f = 7.5 rev/s = w  =15π rad/s

time ( t ) = 9.50 secs

a) Determine the moment of inertia of the grindstone including the shaft

moment of inertia of grindstone = MR^2 / 2 = 55* (0.325)^2 / 2 = 2.905

moment of inertia of shaft = mr^2 = 4 *0.3^2 = 0.36

∴ moment of inertia including shaft = 2.905 + 0.36 = 3.265 kg-m^2

b) Determine the angular acceleration of the grindstone

∝ = - 15π / 9.5 ( i.e.  angular velocity / time )

   = - 4.96  rad/s^2 ( deceleration value )

c) Determine average torque done by friction to bring the grindstone to rest

Torque ( I * ∝ )  = 3.265 x 4.96 = 16.1944 N-m (magnitude)

d) Determine the number of revolutions before grindstone comes to rest

Total revolutions N before grindstone comes to rest

= ( f1 + f2)* t /2 = 7.5 * 9.5 / 2 = 35.625

Note : f2 = 0 as it comes to rest

          f1 = 7.5 rev/s

e) Determine the Linear acceleration of the shaft in this process

This can be calculated using this relation

r * ∝ = 0.3 x (- 4.96 ) = - 1.488 m/s^2

f) Determine the linear distance travelled by the shaft

This can be calculated with the relation below

r * 2 * π * N = 0.3 * 2π * 35.625 = 67.1175 m.

A 16.2-g bullet with an initial speed of 850 m/s embeds itself in a 40.0-kg block, which is attached to a horizontal spring with a force constant of 1000 N/m. What is the maximum compression of the spring

Answers

The maximum compression in the spring is 0.06883 meters.

Given to us,

mass of bullet, [tex]m= 16.2\ grams[/tex]

velocity of bullet, [tex]v= 850\ meter/second[/tex]

mass of the block, [tex]m_2= 40\ kilograms[/tex]

velocity of block, [tex]v_2= 0\ meter/second[/tex]

spring constant, [tex]k = 1000\ Newton/meter[/tex]

Combined mass after collision,

[tex]\begin{aligned}M&= m_1+m_2\\&= 40.0162\ Kilograms\end{aligned}[/tex]

Using the momentum conservation equation, to find out final velocity of the system(bullet and block combined)

[tex]m_1v_1+m_2v_2= MV\\[/tex]

[tex]0.0162\times 850+40\times 0 = 40.0162\times V\\V= 0.3441 meter/sec[/tex]

Now using the Conservation of Energy (Kinetic energy of the system will be equal to potential energy in the spring), to find out the displacement of the spring [tex](x)[/tex]

[tex]\frac{1}{2}kx^2 = \frac{1}{2}MV^2\\\\\frac{1}{2}\times 1000\times x^2= \frac{1}{2} \times40.0162\times0.3441^2\\\\x^2= 0.004738\\\\x= 0.06883\ meters[/tex]

Hence, the maximum compression in the spring is 0.06883 meters.

To know more visit:

https://brainly.com/question/2001019

what types of cuts do jig saw sanders make?​

Answers

The jigsaw can be used to make both straight and curved cuts in a wide variety of materials, including wood, particleboard, plywood, plastic, metal, even ceramic tile. There is also way more than those, but those are just the basics or common things. Hope this helps!

Students have 4 different pairs of sunglasses, each with lenses where the polarization filter is oriented in different directions (indicated by the direction of lines drawn on the lenses below). They are planning to ride rafts down a river on a sunny day where there is lots of glare on the water. Which pair would they want to wear to eliminate the glare from the sun

Answers

Answer:

the lens you must select has an angle of 143º measured with respect to the horizontal, this angle is 53º with respect to the vertical.

Explanation:

The glare is caused by the reflection of light in the water, the polarization of the reflected light is polarized in a direction parallel to the surface of the water, the polarization is total for the angles

         n = tan  [tex]\theta_{p}[/tex]

         \theta_{p} = tan⁻¹ n

the refractive index for seawater is 1.33

         \theta_{p}= tan⁻¹  1.33

         \theta_{p} = 53º

for this angle the light is totally polarized, for the other angles the polarization is partial.

Based on this, the lenses must eliminate this polarization, so its polarization direction must have 90º with respect to this polarization,

          \theta_{lens} = 53 +90

           \theta_{lens}= 143º

Therefore, the lens you must select has an angle of 143º measured with respect to the horizontal, this angle is 53º with respect to the vertical.

A lens that could work is one that is polarized 45º with respect to the vertical.

The glass that is worn to eliminate glare must be able to remove glare away from the user.

What are sunglasses?

The term sunglasses refers to the kind of glasses that are worn to prevent glare from the sun. This is because the glasses are made of polaroid materials that eliminate glare.

The question is incomplete as the sunglasses are not shown. However, the glass that is worn to eliminate glare must be able to remove glare away from the user.

Learn more about sunglasses:https://brainly.com/question/23182689?

#SPJ5

Please help me ASAP!!

Answers

Answer:

the ball lose kentic energy and gains potential energy rolling upward

Answer:

c

Explanation:

when a ball is rolling down it loses potential and gains kinetic, but in this case since the ball is going upwards it is losing kinetic energy and gaining potentail like a roller coaser

The Moon is attracted to the Earth. The mass of the Earth is 6.0x1024 kg and the mass of the Moon is 7.4x1022 kg. If the Earth and Moon are 345,000 km apart, what is the gravitational force between them?

Answers

Sorry I don't know the answer

help ASAP 100 POINTS

Question 1 (1 point)
According to theory, which term best describes the universe before the big bang?

Question 1 options:

a star


a cloud of gas and dust


a small densely packed ball of matter


a planet

Question 2 (1 point)
Which example is used as evidence that the universe began with the big bang?

Question 2 options:

leftover energy in the form of background radiation in the universe from the event


the force of gravity


craters on the moon


the existence of atoms

Question 3 (1 point)
How do scientists use the Doppler effect to understand the universe?

Question 3 options:

to determine motion of objects


to determine light brightness


to determine planet compositition


to determine the ages of planets

Question 4 (1 point)
The Doppler effect indicates that the universe is expanding because_________.

Which phrase best completes the sentence.

Question 4 options:

light from other galaxies is the same color


light from other galaxies is the different color


light from other galaxies is blue shifted


light from other galaxies is red shifted

Question 5 (1 point)
What does a blue shift in light from stars indicate?

Question 5 options:

The stars are moving randomly.


The stars are moving closer.


The stars are moving farther away.


The stars are stationary.

Answers

Answer:

Explanation:

Question 1 (1 point)

According to theory, which term best describes the universe before the big bang?

a small densely packed ball of matter

Question 2 (1 point)

Which example is used as evidence that the universe began with the big bang?

Question 2 options:

leftover energy in the form of background radiation in the universe from the event

Question 3 (1 point)

How do scientists use the Doppler effect to understand the universe?

to determine motion of objects

 

Question 4 (1 point)

The Doppler effect indicates that the universe is expanding because_________.

Which phrase best completes the sentence.

light from other galaxies is red shifted

Question 5 (1 point)

What does a blue shift in light from stars indicate?

The stars are moving closer.

Which of the following creates the night-and-day cycle experienced on Earth?
A) Orbit of Earth around the Sun
B) Rotation of the Sun
C) Rotation of the Earth
D) Tilt of the axis of Earth

Answers

the answer should be C

A column of argon is open at one end and closed at the other. The shortest length of such a column that will resonate with a 200 Hz tuning fork is 42.5 cm. The speed of sound in argon must be: Group of answer choices

Answers

Answer:

The speed of sound in the argon is 340 m/s.

Explanation:

Given;

fundamental frequency, f₀ = 200 Hz

length of the pipe, L = 42.5 cm = 0.425 m

A pipe that is open at one end and closed at another end is known as a closed pipe.

The wavelength for the first harmonic is calculated as;

L = Node -------> Antinode

L = λ/4

λ = 4L

The speed of the sound is calculated as;

v = fλ

where;

v is the speed of the sound

v = f x 4L

v = 200 x (4 x 0.425)

v = 340 m/s

Therefore, the speed of sound in the argon is 340 m/s.

why do trucks need a runaway ramp

Answers

Answer:

in case they lose control going downhill.

Explanation:

which is why they usually have a steep incline and are quite long. You see them used typically when the trucks brakes fail.

A uniform solid ball has a mass of 20 g and a radius of 5 cm. It rests on a horizontal surface. A sharp force is applied to the ball in the horizontal direction 9 cm above the surface. The force rises linearly from 0 to a peak value of 40,000 N in 10^(-4) s then decreases linearly to 0 in another 10^(-4) s. (The moment of inertia for a solid ball is 2/5 mR^2 ) What is the velocity of the ball after the impact

Answers

Answer:

i think the answer is 32 something

Explanation:

What is the centripetal force for a roller coaster if the mass is 10 kg and the normal force is 25 N?

Answers

Answer:

Fc = 123 Newton

Explanation:

Net force can be defined as the vector sum of all the forces acting on a body or an object i.e the sum of all forces acting simultaneously on a body or an object.

Mathematically, net force is given by the formula;

[tex] Fnet = Fapp + Fg[/tex]

Where;

Fnet is the net force.

Fapp is the applied force.

Fg is the force due to gravitation.

Given the following data;

Normal force = 25N

Mass = 10kg

To find the centripetal force;

From the net force, we have the following formula;

Fc = N + mg

Where;

Fc is the centripetal force.

N is the normal force.

mg is the the weight of the object.

Substituting into the formula, we have;

Fc = 25 + 10(9.8)

Fc = 25 + 98

Fc = 123 Newton


Which of the following is most consistent with the modern theory of evolution?
O Parents pass their physical traits to their offspring; those offspring with traits that help the
O Parents change their physical traits in order to survive in the environment, then those pa
O Life on this planet came from another planet far out in space.
O Living organisms have not changed for hundreds of millions of years.

Answers

Answer:

The theory of evolution by natural selection, first formulated in Darwin's book "On the Origin of Species" in 1859, is the process by which organisms change over time as a result of changes in heritable physical or behavioral traits

what type of signal is utilized by the GP's satellite ?

Answers

Answer:

Hi how are you doing today Jasmine

Answer:

The answer is B

Explanation:

I did the USA test prep

Calculate the electric field intensity
at a Point 15cm from a charge of 10 uc​

Answers

Answer:

it's very easy and simple answer u can't do it

The electric field intensity at a point of 15cm from a charge of 10 μc will be 3.9 ×10⁶ N/C.

What is the intensity of the electric field?

The electric field is defined as the area over an electric charge where its impact may be felt. The force experienced by a unit positive charge deposited at a given position is known as the electric field intensity.

The formula for the electric field intensity is given as;

[tex]\rm E= \frac{q}{4 \pi \epsilon d^2 } \\\\ \rm E= \frac{10 \times 10^{-6}}{4 \times 3.14 \times 8.85 \times 10^{-12}(15 \times 10^{-2}^2 } \\\\ E=3.9 \times 10^6 \ NC^{-1}[/tex]

Hence the electric field intensity at a point of 15cm from a charge of 10 μc will be 3.9 ×10⁶ N/C.

To learn more about the intensity of the electric field refer to the link;

https://brainly.com/question/26446532

[tex] \sf{ What \: is \: a \: parallel \: circuit? }[/tex]
[tex] \\ \\ \\ \\ \\ [/tex]

Answers

Answer:

parallel circuit is a kind of circuits in which all components are connected between the same two sets of electrically common points, creating multiple paths for the current to flow from one end of the battery to the other:

Answer:

Gadhe hote hai log and usme sabse pehele aati hai Jonain jaise log waah waah xD

Brainliest krdena warna chappal padenge -,-

What was the name of the voyages taken by Zheng he during the Ming dynasty on behalf of China

Answers

Answer:

Ming treasure voyages

Explanation:

a girl stands on a boat and feels the boat rise and fall 7 times In 1 minute. what is the period of the water wave? give your answer to 3 significant figures​

Answers

Explanation:

hope it's helpful

have a nice day!!!! ;)

what is the reason that causes viewing obstacle and less in sloar radiation?​

Answers

Answer:

In addition to the sun's angle, atmospheric conditions can affect radiation levels. Cloud cover, air pollution and the hole in the ozone layer all alter the amount of solar radiation that can reach the surface. These factors all cause typical radiation levels to differ.

hope it helps

To solve this, we must be knowing each and every concept behind solar radiation. Therefore, cloud cover, air pollution, and the ozone hole all reduce the quantity of solar energy that reaches the earth's surface.

What is solar radiation?

The energy generated by the sun as just a consequence of vast internal processes is known as solar radiation. In a word, the sun's capacity to generate intense nuclear fusion within and around the core enables it to radiate such vast amounts of energy inside the form of both heat and light. The entire process begins at the core of the sun.

Aside from the sun's angle, meteorological variables can influence radiation levels. Cloud cover, air pollution, and the ozone hole all reduce the quantity of solar energy that reaches the earth's surface. All of these variables contribute to variations in normal radiation levels.

Therefore, cloud cover, air pollution, and the ozone hole all reduce the quantity of solar energy that reaches the earth's surface.

To know more about  solar radiation, here:

https://brainly.com/question/23338147

#SPJ2

Which best describes a tsunami?

Answers

Answer:

A tsunami is a series of waves in a water body caused by the displacement of a large volume of water, generally in an ocean or a large lake. Earthquakes, volcanic eruptions and other underwater explosions above or below water all have the potential to generate a tsunami. Unlike normal ocean waves, which are generated by wind, or tides, which are generated by the gravitational pull of the Moon and the Sun, a tsunami is generated by the displacement of water.

Answer:

A tsunami is series of waves caused by heavy winds. Hurricanes can cause tsunami

Explanation:

Consider a composite cube made of epoxy with fibers aligned along one axis of the cube (the fibers are parallel to four of the twelve cube edges). If the cube can only be loaded in axial tension such that the force is uniformly applied over - and is normal to - a cube face, what is the lowest possible positive length change the cube can experience under this tension

Answers

The question is incomplete. The complete question is :

Consider a composite cube made of epoxy with fibers aligned along one axis of the cube (the fibers are parallel to four of the twelve cube edges). If the cube can only be loaded in axial tension such that the force is uniformly applied over - and is normal to - a cube face, what is the lowest possible positive length change the cube can experience under this tension? The applied tensile force is 102 KN. The unloaded cube edge length is 56 mm. The glass fibers have an elastic modulus of 200 GPa. The epoxy has an elastic modulus of 38 GPa. The cube is comprised of 18 vol% epoxy (the balancing vol % is glass fiber). Hint: The loading axis is intentionally unspecified. Answer Format: Lowest possible length increase (change of length) under tension.

Solution :

Given :

[tex]$E_{glass fibre}$[/tex] = 200 GPa

[tex]$V_{glass fibre} = 82\%$[/tex]

[tex]$E_{epoxy}$[/tex] = 38 GPa

[tex]$V_{epoxy} = 82\%$[/tex]

Edge length = 56 mm

Cube is loaded in axial tension such that the force is uniformly applied over a cube face.

[tex]$E_{\text{composite}}=\frac{E_{glass fibre} \times E_{epoxy}}{(E_{glass fibre .E_{epoxy}})+(E_{fibre}.V_{glass fibre})}$[/tex]

[tex]$E_{composite} = \frac{200 \times 38}{(200 \times 0.18)+(38\times 0.82)}$[/tex]

               [tex]$=113.16 $[/tex]  GPa

Applied stress [tex]$=\frac{\text{applied load}}{\text{area}}$[/tex]

                    [tex]$\sigma=\frac{102 \times 10^3 \ N}{56 \times 56 \times 10^{-6} \ m^2}$[/tex]

                       = 32.5 MPa

By Hooke's law

[tex]$\sigma = E . \epsilon$[/tex]

[tex]$\sigma = E. \frac{\Delta l}{l}$[/tex]

[tex]$\Delta l = \frac{\sigma}{E}\times l$[/tex]

Length change, [tex]$\Delta l =\frac{32.5 \times 10^6 \ Pa}{113.16 \times 10^9 \ Pa}\times 56 \times 10^{-2} \ m$[/tex]

[tex]$\Delta l = \frac{32.5 \times 56}{113.16} \times 10^{-3} \ mm$[/tex]

   = 0.016 mm

A charged rod is brought near one end of a long, uncharged metal block. Students want to experimentally measure the resulting charge distribution along the entire length of the block. They have a small, positively charged sphere on a string that can be used as a test charge with negligible effect on the other charges. They will observe whether the sphere is attracted or repelled when held near the rod. Which of the following describes and justifies a procedure that will provide data to determine the entire charge distribution?

a. Hold the sphere near the end of the block closest to the rod, because that will give experimental data about both ends of the block.
b. Hold the sphere near each end of the block, because that will give experimental data about both ends of the block.
с. Hold the sphere near each end of the block and near the block's middle, because that will give experimental data about the area along the length of the block.
d. Hold the sphere near each end of the block and at a number of points along the length of the block, because that will give experimental data for the whole block.

Answers

Answer:

d

Explanation:

The sphere is positively charged so that when it comes in contact with the rod, its positive charges will repel to the other end. Hence, Hold the sphere near each end of the block, because that will give experimental data about both ends of the block.

What is polarization?

Polarization is the separation of charges into two poles due electrostatic repulsion. Two similar charges will repel and opposite charges attracts each other.

When a charged or polar substance get in contact with a non-polar substance, the nonpolar one will deform in such a way that the electrons from the polar one will repel the electrons of nonpolar and there occurs a temporary charge separation in non polar substance creating an induced polarity.

Here, when the positive sphere comes in contact with the charged rod, the positive charges will align to the opposite pole of the rod away from the sphere and the negative charges will align near the sphere.

Thus there occurs an attractive force at one end and repulsion at the other end. Thus, holding the sphere at each end will data about charge distribution.

To find more on polarization, refer here:

https://brainly.com/question/29217577

#SPJ5

the path of the earth around the sun is called​

Answers

Answer:

Orbit.

Explanation:

An orbit is a regular, repeating path that one object in space takes around another one, it's an imaginary path of the Earth around the Sun.

What’s the answer to 19 please please help me

Answers

Answer:

A.

Explanation:

A po sa tingin ko

sana po makatulong

Answer A it transmits red and absorbs all the other colors

map.
Which best describes the motion of the object
between 1 and 4 seconds?
کے م
The object has decreasing acceleration and
increasing velocity.
The object has positive acceleration and eventually
stops.
The object has decreasing acceleration and
decreasing velocity.
The object has negative acceleration and eventually
stops.

Answers

Answer:

The object has decreasing acceleration and decreasing velocity.

NO LINKS: Which of the following best demonstrates Newton's Third Law?

Gravity is a force pulling down on you.

The ahrder you hit a volleyball the faster it will get over the net

Air resistance slows down a parachutist

Your foot pushing on the floor and the floor pushing back

Answers

The best demonstration that applies to Newton's Third Law of motion would be D) When you walk your foot pushes down on the ground while the ground pushes back on your foot.

------------------

Newton's Third Law states that for every action, there is an equal and opposite reaction. This is actually explains that forces come in pairs and forces are an interaction between two objects. As per the correct option given in the question explains Newton’s Third Law.  

------------------

When you walk your foot (say object A) pushes down on the ground while the ground (say object Q) pushes back on your foot with the same force but in the opposite direction.

The Chernobyl reactor accident in what is now Ukraine was the worst nuclear disaster of all time. Fission products from the reactor core spread over a wide area. The primary radiation exposure to people in western Europe was due to the short-lived (half-life 8.0 days) isotope 131I
131 I, which fell across the landscape and was ingested by grazing cows that concentrated the isotope in their milk. Farmers couldn't sell the contaminated milk, so many opted to use the milk to make cheese, aging it until the radiactivity decayed to acceptable levels. How much time must elapse for the activity of a block of cheese containing 131I 131 I to drop to 1.0% of its initial value?

Answers

Answer:

The correct answer is "53.15 days".

Explanation:

Given that:

Half life of [tex]131_{I}[/tex],

[tex]T_{\frac{1}{2} }= 8 \ days[/tex]

Let the initial activity be "[tex]R_o[/tex]".and, activity to time t be "R".

To find t when R will be "1%" of [tex]R_o[/tex], then

⇒ [tex]R=\frac{1}{100}R_o[/tex]

As we know,

⇒ [tex]R=R_o e^{-\lambda t}[/tex]

or,

∴ [tex]e^{\lambda t}=\frac{R_o}{R}[/tex]

By putting the values, we get

        [tex]=\frac{R_o}{\frac{R}{100} }[/tex]

        [tex]=100[/tex]

We know that,

Decay constant, [tex]\lambda = \frac{ln2}{T_{\frac{1}{2} }}[/tex]

hence,

⇒ [tex]\lambda t=ln100[/tex]

     [tex]t=\frac{ln100}{\lambda}[/tex]

        [tex]=\frac{ln100}{\frac{ln2}{8} }[/tex]

        [tex]=53.15 \ days[/tex]  

What happened to the combined energy of the two sleds when they collided?

Answers

Hi!
Here’s your answer:

What happened to the combined energy of the two sleds when they collided? It changed forms into another energy C. Because energy is conserved, the “lost” energy has actually been changed into other forms.

Hope this helps have a good day!!<3

Combined energy of the two sleds will be conserved when they collides.

What is Energy ?

Energy is nothing but the ability to do work. there are different energies in different form which are thermal energy, mechanical energy, electric energy and sound energy etc.

According to first law of thermodynamic, Energy neither be created nor be destroyed. it can only be transferred from one form into another form. Energy is expressed in joule (J). its dimensions are [M¹ L² T⁻²].

Energy is conserved throughout the motion,

according to conservation law of energy, initial energy is equal to final energy.

When two sleds coming in opposite direction, it is having mass as well as velocity. hence it has kinetic energy, when they get collide with each other some of total energy gets converted into sound energy as collision cause sound(boom). some of the energy will use to break the material which made the sled and remaining energy will convert in kinetic energy of broken sleds it can be moved in opposite direction or in same direction depending initial energies.

in this collision combined kinetic energy can be converted into sound energy, mechanical energy and again kinetic energy but totally energy is conserved.

Hence combined energy will be conserved.

To know more about energy :

https://brainly.com/question/1932868

#SPJ3.

Which of the following best explains the greater difficulty in stopping a 1000-kg car
moving at 174 km/h compared to an identical 1000-kg car moving at 100 km/h?

Answers

Stopping a 1000 kg car moving at a speed of 174 km/h will be more difficult than stopping an identical car moving at 100 km/h.

This can be explained by using Newton's second law of motion which says that the rate of change of momentum of a body is equal to the force applied.

We know that momentum of a body is the product of its mass and velocity.The momentum of the car moving at 174 km/h = [tex]1000\, kg \times 174\, km/h = 174000 \, kg.km/h[/tex].The momentum of the car moving at 100 km/h = [tex]1000\, kg \times 100\, km/h=100000 kg.km/h[/tex].

Therefore, the car moving at 174 km/h has higher momentum and from Newton's second law of motion, a higher force would be required to stop this car.

Learn more about Newton's second law of motion here:

https://brainly.com/question/13447525?referrer=searchResults

When you blow across the top of a soda bottle, it acts like a closed pipe. If the inside of the bottle is 0.150 long, what is the fifth harmonic frequency

Answers

Answer:

The fifth harmonic frequency is 2.9 KHz.

Explanation:

For a closed tube, the fifth harmonic frequency is also the second overtone. So that;

fifth harmonic frequency = [tex]\frac{5V}{4L}[/tex]

where V is the velocity of the sound in air, and L is the length of the tube.

But L = 0.15 m and V = 343 m/s, then:

fifth harmonic frequency = [tex]\frac{5*343}{4*0.15}[/tex]

                                     = [tex]\frac{1715}{0.6}[/tex]

                                     = 2858.33 Hertz

fifth harmonic frequency = 2.9 KHz

The fifth harmonic frequency of the soda bottle is approximately 2.9 KHz.

Answer:

2828.33

Explanation:

answer for acellus

Other Questions
who says this quote"Oh serpent heart, hid with a flowering face!"and pls NOOOO LINKSS can someone answer this please at the end of meiosis there are 4. A mysterious card playing squirrel offers you the opportunity to join inhis game. The rules are:To play you must pay him $2. If you pick a spade from a shuffled pack, you win $9Find the expected value you win (or lose) per game.. 10. V=720 cmL=?P=15 cmT=8 cmA. 6 cmB. 8 cmC.10 cmD. 12 cm what are the main aims and objectives of the west indian federation? Qu es la condicin fsica?A) Conjunto de capacidades fsicas, que se pueden mejorar mediante el entrenamiento.B) Salud y ejercicio.C) Fuerza, resistencia, velocidad y flexibilidad. On a number line 8.63 would be located... choose all answers that make the statement true A) to the right of 8.66B) between 8 and 9 C) between 8.62 and 8.64 D) to the left of 8.61 What will most likely be the result of destroying the rain forest for timber harvesting and creating farmland?A.an improvement of local water supplies as the soil is stabilized and decaying vegetation from the trees disappearsB.an increase in the populations of underpopulated areas of Earth, which should ease overcrowding in more populated areas of the planetC.a decrease in biodiversity caused by loss of habitat and increased global warming HELP PLEASE!!!in act 3 tybalt first fights-mercutio-romeo-benevolio-abram Which choices provide the BEST analysis of the author's reason for structuring the eleventh paragraph as he did? (Choose all thatapply) Please help(A) He ends with simple sentences to drive home the simple point of theprevious paragraphs.B)He ends the paragraph with the word "destruction to threaten othernations of their impending doom.C)He opens with the transitional word "Finally, to indicate that he iswrapping up a section of the speechD)He opens with the word "finally to indicate that he is finished with hisadministration and will soon be leaving office.(E)He balances contrasting outcomes for what will happen if nations chooseto be America's 'adversary' and do not choose peace. Someone help me out with this my grade are bad Cylindrical oatmeal container has a diameter of 7 inches and a height of 10 inches find the surface area of the label which covers the curve surface of the can Bob wants to buy a pack of pens that costs $4.95. He has 2 dollar bills, 5 quarters, and two dimes. How much more money does he need? Which of the following was NOT a believed correct description of how different tastes were perceived? Consolidated Supplies is a medium-sized distributor of restaurant supplies that operates in Canada and several northern U.S. states. They have 12 large warehouses spread across both countries to service their many customers. Products arrive from the manufacturers and are stored in the warehouses until they are picked and put on a truck for delivery to their customers. The networking equipment in their warehouses is old and is starting to give them problems; these problems are expected to increase as the equipment gets older. The vice president of operations, Pat McDonald, would like to replace the existing LANs and add some new wireless LAN technology into all the warehouses, but he is concerned that now may not be the right time to replace the equipment. He has read several technology forecasts that suggest there will be dramatic improvements in networking speeds over the next few years, especially in wireless technologies. He has asked you for advice about upgrading the equipment. Should Consolidated Supplies replace all the networking equipment in all the warehouses now, should it wait until newer networking technologies are available, or should it upgrade some of the warehouses this year, some next year, and some the year after, so that some warehouses will benefit from the expected future improvements in networking technologies? Angle RelationshipUse a calculator to find the approximate value of the expression. Round the answer to two decimal places.The sine of the complimentary angle of 34a. -0.52b. 0.83c. 0.97d. -0.66Please select the best answer from the choices provided If the temperature and amount of gas stays constant, what will happen to the pressure of a gas if the volume of the container decreases? Drag in the strongest hook for the thesis statement and theme.Themehow technology affects communicationHookThesisIn today's world of texting and emojis, formal grammar is no longer important to communication.Drag into one of the empty spots above.A series of text messages buzzes a phone right off of a table.A text message can never express the true emotion heard in a loved one's voice at the other end of a phone call.A text message contains a jumble of letters, symbols, and bright smiley faces, but the recipient knows exactly what it means. - Cmo ____ Antonio?-Creo que ___ enfermo.