Answer:
Explanation:
Magnitude of frictional force = μ mg
μ is either static or kinetic friction.
To start the crate moving , static friction is calculated .
a ) To start crate moving , force required = μ mg where μ is coefficient of static friction .
force required =.517 x 56.6 x 9.8 = 286.76 N .
b ) to slide the crate across the dock at a constant speed , force required
= μ mg where μ is coefficient of kinetic friction , where μ is kinetic friction
= .26 x 56.6 x 9.8 = 144.21 N .
Electronic flash units for camera contain a capacitor for storing the energy used to produce the flash. In one such unit, the flash lasts for 1675s with an average light power output of 2.70 x 105 W . (a) If the conversion of electric energy to light is 95% efficient ( the rest of the energy goes to thermal energy), how much energy must be stored in the capacitor for one flash
Answer:
420J
Explanation:
Power is the time rate of change in energy. Power is the ratio of energy to time. The S.I unit of power is in watts.
Given that the flash lasts for 1/675 s, power output is 2.7 * 10⁵ W. Hence:
Power = Energy / time
Substituting:
2.7 * 10⁵ W = Energy / (1/675)
Energy = 2.7 * 10⁵ W * 1/675 = 400J
Therefore the energy emitted as light is 400J.
Since the conversion of electric energy to light is 95% efficient, hence the energy stored as electrical energy is:
Energy(capacitor) = 5% of 400J + 400J = 0.05*400 + 400
Energy(capacitor) = 420J
In a warehouse, the workers sometimes slide boxes along the floor to move them. Two boxes were sliding toward each other and crashed. The crash caused both boxes to change speed. Based on the information in the diagram, which statement is correct? In your answer, explain what the forces were like and why the boxes changed speed.
Box 1 has more mass than Box 2.
Box 1 and Box 2 are the same mass.
Box 1 has less mass than Box 2
Answer:
The second one.
Explanation:
It caused both to change speed because they have both the same mass.
A plane travels at an average speed of 600 kilometers per hour. How long
does it take the plane to travel 120 kilometers?
Answer:
12 mins
Explanation:
120km/600km = 1/5 or .2
60mins*0.2 = 12 mins
Problem 6. A negatively charged particle is placed in a uniform electric field directed
from South to North. In which direction will the particle move after it is released?
A) West
B) East
C) South
D) North
E) North-West
po
UP
A
B
Meeting na
D
Activate!
Go to Setting
C) South
As we know that, north is considered as negative, and south as positive. Now, the charge on particle is negative; so, when we will release it, it will move towards the south.
In the scenario where the negatively charged particle is placed in a uniform electric field, the direction will be C. South.
What is an electric field?It should be noted that an electric field simply means the physical field which surrounds electrically charged particles.
Since the negatively charged particle is placed in a uniform electric field directed from South to North, the direction that the particle move after it is released is South.
Learn more about electric field on:
https://brainly.com/question/14372859
Una esfera de aluminio de 250 g a una temperatura de 230 °C se introduce en 450 g de alcohol a una temperatura de 18 °C. Determine la temperatura de equilibrio del sistema. El calor específico del aluminio es 911 J kg-1 °C-1 y para el alcohol 2100 J kg-1 °C-1.
Answer:
La temperatura de equilibrio del sistema es de aproximadamente 59,17 °C
Explanation:
La masa de la esfera de aluminio, m₁ = 250 g
La temperatura inicial de la esfera de aluminio, T₁ = 230 °C
La capacidad calorífica específica del aluminio, c₁ = 911 J / (kg·°C)
La masa del alcohol, m₂ = 450 g
La temperatura inicial del alcohol, T₂ = 18 ° C
La capacidad calorífica específica del alcohol, c₂ = 2,100 J/(kg·°C)
Observamos que el punto de ebullición del alcohol ≈ 78,37°C
Sea 'T' la temperatura de equilibrio del sistema, obtenemos;
ΔQ₁ = ΔQ₂
ΔQ₁ = Calor transferido desde el aluminio = m₁ · c₁ · (T₁ - T)
ΔQ₂ = Calor transferido al alcohol = m₂ · c₂ · (T - T₂)
∴ m₁ · c₁ · (T₁ - T) = m₂ · c₂ · (T - T₂)
Por lo tanto, por sustitución, obtenemos
250 × 911 × (230 - T) = 450 × 2100 × (T - 18)
Usando una calculadora gráfica, tenemos;
T = 277570/4691 °C ≈ 59,17 °C
La temperatura de equilibrio del sistema, T ≈ 59.17 °C
True or false
scientific research has now proven that atoms are composed of parts that are larger than protons neutrons and electrons
Answer:
False
Explanation:
parts that are smaller than protons neutrons and electrons
After being struck by a bowling ball, a 1.8 kg bowling pin sliding to the right at 5.0 m/s collides head-on with another 1.8 kg bowling pin initially at rest. Find the final velocity of the second pin in the following situations: a) The first pin moves to the right after the collision at 0.8 m/s. Answer in units of m/s. 010 (part 2 of 2) 10.0 points b) The first pin stops moving when it hits the second pin. Answer in units of m/s
Answer:
a) v₂ = 4.2 m/s
b) v₂ = 5 m/s
Explanation:
a)
We will use the law of conservation of momentum here:
[tex]m_1u_1+m_2u_2=m_1v_1+m_2v_2[/tex]
where,
m₁ = m₂ = mass of bowling pin = 1.8 kg
u₁ = speed of first pin before collsion = 5 m/s
u₂ = speed of second pin before collsion = 0 m/s
v₁ = speed of first pin after collsion = 0.8 m/s
v₂ = speed of second after before collsion = ?
Therefore,
[tex](1.8\ kg)(5\ m/s)+(1.8\ kg)(0\ m/s)=(1.8\ kg)(0.8\ m/s)+(1.8\ kg)(v_2)\\v_2 = 5\ m/s - 0.8\ m/s[/tex]
v₂ = 4.2 m/s
b)
We will use the law of conservation of momentum here:
[tex]m_1u_1+m_2u_2=m_1v_1+m_2v_2[/tex]
where,
m₁ = m₂ = mass of bowling pin = 1.8 kg
u₁ = speed of first pin before collsion = 5 m/s
u₂ = speed of second pin before collsion = 0 m/s
v₁ = speed of first pin after collsion = 0 m/s
v₂ = speed of second after before collsion = ?
Therefore,
[tex](1.8\ kg)(5\ m/s)+(1.8\ kg)(0\ m/s)=(1.8\ kg)(0\ m/s)+(1.8\ kg)(v_2)[/tex]
v₂ = 5 m/s
can someone help me :/ a 30 kg cart is accerlerating at 3 m/s2 (tiny 2) How much force is involved?
Explanation:
Write what you know
F = ma
m = 30kg
a = 3
Plug and chug
fun fact:numbers that are exponents are called superscripts
The voltage drop across any component is
the difference in voltage referenced to
between the two terminals of
the component.
Answer:
The voltage si the nevery Hokage de Naruto y fue su amigo
Which term BEST describes energy
stored in batteries and food?
potential energy
kinetic energy
heat energy
chemical energy
An object being pulled towards Earth by gravity is said to be in __.
Answer:
in orbit
Explanation:
An object in orbit, like an object falling to the ground, is pulled toward Earth's center. If the object moves far enough forward as it falls, it orbits around Earth instead of hitting the ground.
The global positioning system (GPS) uses electromagnetic waves sent between computer devices on Earth and satellites in space to automatically determine the exact position of the computer device on Earth. In order to create this technology, engineers had to apply Einstein’s theory of relativity, which explains how electromagnetic waves change direction in space.
During which stage of developing the global positioning system did engineers first apply the theory of relativity to design the product?
first
second
third
fourth
Answer:
SECOND
Explanation:
I got it wrong when I put in First, and Edge told me the answer was b. SECOND
(GIVE THE ANSWER OR GET REPORTED) Please solve it with the steps
Answer:
4. a = 2 m/s² 5. m = 20 kg
Explanation:
4.
Mass of the book, m = 2kg
The net force acting on the book, F = 4 N
Let a is the acceleration of the book. We know that,
F = ma
Put all the values,
[tex]a=\dfrac{F}{m}\\\\a=\dfrac{4}{2}\\\\a=2\ m/s^2[/tex]
So, the acceleration of the book is equal to [tex]2\ m/s^2[/tex].
5.
Kinetic energy of the car, K = 4000 J
Speed of the car, v = 20 m/s
We need to find the mass of the car. The formula for the kinetic enregy is given by :
[tex]K=\dfrac{1}{2}mv^2\\\\m=\dfrac{2K}{v^2}\\\\m=\dfrac{2\times 4000}{(20)^2}\\\\m=20\ kg[/tex]
So, the mass of the car is equal to 20 kg.
Answer this Science question NO LINKS !!!!
Which term is defined as the ratio of the speed of light in a vacuum to the speed of light in the material it is passing through?
index of reflection
index of refraction
angle of incidence
angle of reflection
Answer:
The index of refraction
What is the index of refraction?
The index of refraction tells us how much slower or faster light travels from one medium to another.
What is a medium? ⇒ the substance that light passes throughThe formula to find the refractive index of a substance is the following:
[tex]n=\dfrac{c}{v}[/tex]
[tex]c[/tex] = the speed of light in a vacuum ([tex]3.00*10^8[/tex] m/s)[tex]v[/tex] = the speed of light in the mediumThis makes the index of refraction defined as the ratio of:
the speed of light in a vacuum the speed of light in the material it passes throughAnswer:
index of refraction
Explanation:
why doesn't the arrow fly forever
Because gravity pulls it down
An artificial sattelite is moving in a circular orbit of radius 42250km calculate its speed if it takes 24 hours to revolve around the earrth
Answer:
v = 11061.02 km/h
Explanation:
Given that,
The radius of the circular orbit, r = 42250 km
Time taken to revolve around the Earth, t = 24 hours
We need to find the speed of the satellite. We know that, speed of an object is equal to total distance traveled divided by the time taken. So,
[tex]v=\dfrac{2\pi r}{T}[/tex]
Put all the values,
[tex]v=\dfrac{2\pi \times 42250}{24}\\\\v=11061.02\ km/h[/tex]
So, the speed of the satellite is equal to 11061.02 km/h.
best explanation for why oceans have 2 different types of currents
Answer:
Hunubunununununununnunu
Can any one help plz in the question ?
Yes, No, yes
mark me brainliestttt :)))
Answer:
yes
no
no
I think Chek the answer
The energy principle states that:
Energy can be destroyed.
Energy can be created.
Energy cannot be created or destroyed.
Energy cannot be created, but it can be destroyed.
brainleist to correct answer
The energy principle states that:
[tex]\sf\purple{Energy \:cannot \:be \:created \:or\: destroyed.✅}[/tex]
Law of conservation of energy or the first law of thermodynamics states that energy can neither be created nor destroyed; it can only be transferred or changed from one form to another.[tex]\large\mathfrak{{\pmb{\underline{\orange{Happy\:learning }}{\orange{.}}}}}[/tex]
60.0 kg downhill skier is moving with a speed of 10.0 m/s as she starts her descent from a level plateau at 150.0 meters of height above the base of the slope below. The length of the slope is 650 meters. There is a frictional force of 70 N affecting the skier's motion while she coasts the entire descent without using her poles. Upon reaching the bottom she continues to coast to a stop. How much kinetic energy will she have at the bottom of the hill?
Answer:
She will have kinetic energy at the bottom of the hill=45700 J
Explanation:
We are given that
Mass, m=60 kg
Speed, v=10 m/s
Height, h=150 m
Length of slope, d=650 m
Frictional force, f=70 N
We have to find the kinetic energy she will have at the bottom of the hill.
Kinetic energy at the bottom of the hill
=Initial kinetic energy+ mgh-fd
Substitute the values
Kinetic energy at the bottom of the hill
=[tex]\frac{1}{2}(60)(10)^2+60\times 9.8\times 150-70\times 650[/tex]
=[tex]45700J[/tex]
Hence, she will have kinetic energy at the bottom of the hill=45700 J
I NEED THIS ASAP I WILL MARK YOU THE BRAINLIEST NO LINKS
Newton's second law states that force is equal to
weight times acceleration
weight divided by mass
mass times weight
mass times acceleration
Answer:
mass times acceleration
Problem 31:
The parallel circuit depicts three resistors connected to a voltage source.
The voltage source (AVtot) is a 110.-V source and the resistor values are
15.4 QR1), 21.9 D (R2) and 11.7 Q (R3).
b. Determine the current in each branch resistor.
c. Determine the total current in the circuit.
Answer:
Bi. Current in 15.4 Ω (R₁) is 7.14 A.
Bii. Current in 21.9 Ω (R₂) is 5.02 A.
Biii. Current in 11.7 Ω (R₃) is 9.40 A.
C. Total current in the circuit is 21.56 A.
Explanation:
Bi. Determination of the current in 15.4 Ω (R₁)
Voltage (V) = 110 V
Resistance (R₁) = 15.4 Ω
Current (I₁) =?
V = I₁R₁
110 = I₁ × 15.4
Divide both side by 15.4
I₁ = 110 / 15.4
I₁ = 7.14 A
Therefore, the current in 15.4 Ω (R₁) is 7.14 A.
Bii. Determination of the current in 21.9 Ω (R₂)
Voltage (V) = 110 V
Resistance (R₂) = 21.9 Ω
Current (I₂) =?
V = I₂R₂
110 = I₂ × 21.9
Divide both side by 21.9
I₂ = 110 / 21.9
I₂ = 5.02 A
Therefore, the current in 21.9 Ω (R₂) is 5.02 A
Biii. Determination of the current in 11.7 Ω (R₃)
Voltage (V) = 110 V
Resistance (R₃) = 11.7 Ω
Current (I₃) =?
V = I₃R₃
110 = I₃ × 11.7
Divide both side by 11.7
I₃ = 110 / 11.7
I₃ = 9.40 A
Therefore, the current in 11.7 Ω (R₃) is 9.40 A.
C. Determination of the total current.
Current 1 (I₁) = 7.14 A
Current 2 (I₂) = 5.02 A
Current 3 (I₃) = 9.40 A
Total current (Iₜ) =?
Iₜ = I₁ + I₂ + I₃
Iₜ = 7.14 + 5.02 + 9.40
Iₜ = 21.56 A
Therefore, the total current in the circuit is 21.56 A
Which factor contributes the most to the process of water erosion?
A) evaporation
B) gravity
C) pressure
D) temperature
HELP
Answer:
Evaporation
Explanation:
Erosion is a natural process, but human activity can make it happen more quickly. Human activity altering the vegetation of an area is perhaps the biggest human factor contributing to erosion. Trees and plants hold soil in place.
Factor that contributes the most to the process of water erosion is Evaporation. The correct option is A.
What is evaporation?Evaporation is the phenomenon of converting the liquid into gas phase by the addition of heat energy.
Erosion is also a natural phenomenon. Trees and plants hold soil in place and prevents the soil erosion. Just like that, the water erosion happens when more than natural evaporation happens due to increased heat by various factors.
Thus, Evaporation contributes the most to the process of water erosion. The correct option is A.
Which of the following represent units of capacitance? You may choose more than one correct answer:
Ampere
coulomb/volt
coulomb/second
Farad
volt/coulomb
Answer:
Capacitance is a derived physical quantity measured in farad
Answer:
"Farad" is another term for the coulomb/volt measurement of capacitance, so both of those options are the correct answer. Amperes and coulomb/second are measurements of electric flow, in other words, how strong a current is.
An obect is placed 20cm from a convex mirror of focal length 12cm. where does the image form?
Answer:
7.5 cm behind the mirror
Explanation:
Applying,
Using the real is positive convection: All real distance from the mirror are positive
1/f = 1/v+1/u................. Equation 1
Where f = focal length of the mirror, v = image distance, u = object distance
From the question,
f = -12 cm, u = 20 cm
substitute these value into equation 1
1/(-12) = (1/20)+1/v
(-1/12)-(1/20) = 1/v
1/v = (-5-3)/60
1/v = -8/60
v = -60/8
v = -7.5 cm
Hence the image is formed 7.5 cm behind the mirror.
Parallel Circuits:
A) are rarely used in the wiring in homes
B) always need more voltage than series circuits
C) will have positive charges flowing in one branch, negative charges in the other
D) provide more than one path fo current flow
Answer:
D.)
Explanation:
the current separates on each branch according to the resistance it experience.
Answer:D
Explanation:
Sounds are made when objects ____ in air. What one word completes the sentence?
If anybody could help me it would be nice :) <333
Answer:
are crashing?
hope it's good hahah.
The correct answer is: "vibrate".
To find the correct word to complete the sentence, we need to know more about the sound wave.
What is sound wave?
Sound wave is a longitudinal wave i.e. the particles vibrate along the direction of propagation of wave.It requires a material medium to travel i.e. it can not travel in vacuum.How does sound wave produce?
Sound wave is produced due to variation of pressure in a medium. The high pressure region is compression region and low pressure region is rarefaction region.In case of an object, these pressure variations are produced by its vibration in a medium.Thus, we can conclude that sounds are made when objects vibrate in air.
Learn more about sound wave here:
https://brainly.com/question/1199084
#SPJ2
5 points
1. A rubber-band-powered toy car is loaded by pushing it backward until
the rubber band inside is stretched tight. The child lets it go and the
rubber band turns the wheel, accelerating the car. The force that the
rubber band exerts on the axle is calle... *
O A. Applied Force
B. Electromagnetic Force
C. Gravitational Force
D. Elastic Force
Answer:
D. Elastic force
Explanation:
Force of elasticity
A ball is dropped from rest out of a high window in a tall building for 5 seconds. Assuming the we ignore air resistance and assume upwards to be positive. A) What will be the final velocity of the ball B) What is the height of the building if it hits the ground after those 5 seconds. *
Answer:
I am not sure if this is the answer
(B) what is the height of the building if it hits the ground after those 5 seconds.