Answer:
c substance
Explanation:
Matter is never destroyed or created in chemical reactions. The particles of one substance are rearranged to form a new substance. The same number of particles that exist before the reaction exist after the reaction.
How do you decrease the amount of energy storage molecules there are in an ecosystem?
a) increase sunlight
b) decrease sunlight
c) burn dead matter
d) bury dead matter
e) trap carbon dioxide
Decreasing sunlight will decrease the amount of energy storage molecules in an ecosystem.
What is Photosynthesis?This is the process in which green plants manufacture food in the presence of sunlight. Primary producers are involved in this process of providing energy to the ecosystem.
This therefore means that a decrease in sunlight means a decrease in photosynthesis and energy production.
Read more about Photosynthesis here https://brainly.com/question/19160081
#SPJ1
Data Table 3: Polystyrene Test Tube, 12x75mm
Volume of water at room temperature (V1 in ml)
Volume of gas in polystyrene tube at boil (V2 in mL)
Temperature of gas at boil inside polystyrene tube (°C)
Volume of gas in polystyrenetube at room temperature (V3 in mL)
Temperature of gas at room temperature (°C)
Need help with data table 3: polystyrene test tube, 12x75mm
Answer:
Experiment 8 E Data Table 3 fl Data Table 4 fl Data Table 5 fl Data Table 6 Data Table 3: Polystyrene Test Tube, 12x75mm Volume of water at room temperature (V1 in mL) Volume of gas in polystyrene tube at boil (V2 in mL) Temperature of gas at boil inside polystyrene tube (°C) Volume of gas in polystyrenetube at room temperature (V3 in mL) Temperature of gas.
Explanation:
Hope this helps
Mark as Brainliest please
When putting hydrogen peroxide on an open wound, the wound begins to bubble and foam. Has a chemical reaction occurred? Explain your answer.
Answer:
Bubbling can indicate a chemical reaction
Explanation:
Chemical reaction takes place with the beginning of bubbles and foam when hydrogen peroxide is put onto an open wound. This compound does not only heal the wound but also damages the body as it also kills the nearby healthy cells.
What is a chemical reaction?
Chemical reaction is a process which leads to chemical transformation of a chemical substance into another.
Hydrogen peroxide bubbles when it comes into contact with an enzyme called catalase. Most of the cells in the body contain catalase enzyme, so whenever the tissue is damaged, the enzyme catalase is released from the cell and it becomes available to react with the peroxide ion.
Hydrogen peroxide applied on a cut produces a white, fizzling foam which is actually a sign that the solution is killing the bacteria as well as the healthy cells around it.
Learn more about Chemical reaction here:
https://brainly.com/question/3461108
#SPJ2
The stem of a plant is made of several types of tissue that work together.
Which type of structure is the stem of a plant?
a: cell
b: tissue
c: organ
d: organ system
Which is the correct statement regarding the relative Rf values of the starting methyl benzoate vs the product, methyl m-nitrobenzoate on a silica gel TLC plate. The product has a higher Rf value on a silica gel TLC plate because it is less polar than the starting methyl benzoate. The product has a lower Rf value on a silica gel TLC plate because it is less polar than the starting methyl benzoate. The product has a higher Rf value on a silica gel TLC plate because it is more polar than the starting methyl benzoate. The product has a lower Rf value on a silica gel TLC plate because it is more polar than the starting methyl benzoate. 1.5 points QUESTION 2 Methyl benzoate is more reactive than benzene in Electrophilic Aromatic Substition [EAS] reactions. True False 1 points QUESTION 3 Methyl m-nitrobenzoate is less reactive than methyl benzoate in Electrophilic Aromatic Substition [EAS] reactions. True False
Answer:
1. The product has a higher Rf value on a silica gel TLC plate because it is more polar than the starting methyl benzoate.
2. False
3. True
Explanation:
In chromatography, there is a stationary phase and a mobile phase. The ratio of the distance moved by a component and the distance moved by the solvent gives the retention factor (Rf).
Since silica gel is a polar solvent, it will retain the more polar product methyl m-nitrobenzoate compared to the methyl benzoate starting material.
In comparing the electrophillic aromatic substitution of m-nitrobenzoate and methyl benzoate, we must remember that the presence of electron withdrawing groups (such as -NO2 and -CHO) on the aromatic compound deactivates the compound towards electrophillic aromatic substitution hence, methyl m-nitrobenzoate is less reactive than methyl benzoate in Electrophilic Aromatic Substition and Methyl benzoate is less reactive than benzene in Electrophilic Aromatic Substition
The final result has a higher Rf value because the TLC plate has more polarity than the other compound.
The answer to the following question is as follows:-
False True
In chromatography, it is a process that is used to separate the different components on the basis of their votality. The ratio of the distance moved by a component and the distance moved by the solvent gives the retention factor (Rf).
In comparing the electrophilic aromatic substitution of m-nitrobenzoate and methyl benzoate, we must remember that the presence of electron-withdrawing groups on the aromatic compound deactivates.
The compound towards electrophilic aromatic substitution hence, methyl m-nitrobenzoate is less reactive than methyl benzoate in Electrophilic Aromatic Substitution and Methyl benzoate is less reactive than benzene in Electrophilic Aromatic Substitution.
For more information, refer to the link:-
https://brainly.com/question/15804584
what happens to particles when they are heated?
A. STop moving
B.Slow down and compress
C.Move closer together and speed up
D.Speed up and spread out
Answer:
D. Speed up and spread out
A rock is made of the same substance while a mineral is made up of different type of
rocks
True
False
Answer:
False i think
Which among the following is not required in the synthesis of fatty acids.
A). Acetyl-CoA
B). Biotin
C). Carbon iv oxide
D). NADH
Answer:
D). NADH
Explanation:
C12H26+Oxygen=12CO2+water
calculate the mass of one mole of the liquid alkane C12H26.
Answer:
170.38g is the mass of 1 mole of C₁₂H₂₆
Explanation:
To solve this question we must find the molar mass of the alkane C₁₂H₂₆. The molar mass is defined as the mass of one mole of a substance.
In 1 mole of C₁₂H₂₆ we have 12 moles of Carbon and 26 moles of Hydrogen. With the periodic table of elements we can know the molar mass of 1 mole of Carbon and 1 mole of hydrogen, and, thus, the molar mass of the alkane (Molar mass C = 12.01g/mol, H = 1.01g/mol)
Molar mass C₁₂H₂₆:
12C = 12*12.01g/mol = 144.12g/mol
26H = 26*1.01g/mol = 26.26g/mol
144.12g/mol + 26.26g/mol =
170.38g is the mass of 1 mole of C₁₂H₂₆Plz help me I am timed!!
7th grade science lol help
Answer:
The process you are referrring to is erosion.
Explanation:
Weathering would be the breaking down of rock/other land debris. Its more active counterpart would be erosion, wherein the process transports the bits of rock and minerals away. Hope it helps!
Was rays birthday lit
Answer:
Yes.
Explanation:
Yes.
Answer:10-1707
Explanation:
plz, help me it's urgent
Answer:
Explanation:
A is solid, b is melting, c is freezing, d is liquid, e is evaporating, g is gas, and f is condensation.
Hello Mikaela!
Let's start from the top, letter G. Letter G should be gas. Letter F should be condensation. Letter E should be evaporation. Letter D should be liquid. Letter C should be freezing. Letter B should be melting. And letter A should be solid.
I really hope this helps!!
PLEASE HELP ASAP
A sample of a gas has a volume V1 = 3L at a temperature T1 = 290K. Determine V2 when the temperature is T2
= 700K, while the pressure remains constant.
a.- 7.00L
b.- 7.24L
c.-2.74L
Which part of Earth absorbs the most sunlight?
oceans
soil
atmosphere
rivers and lakes
The oceans absorb the most sunlight from the options that we have here.
What is the part?Seventy-one percent or more of the surface of the Earth is covered by the oceans. The result is that they get a lot of sunshine. The upper layers of the ocean absorb a large amount of the incoming solar energy, which enters the ocean waters.
Solar radiation is efficiently absorbed by water, especially in the visible light spectrum. The ocean heats the water as a result of absorbing sunshine. The oceans' ability to absorb solar energy is vital for driving a variety of marine phenomena, including currents, circulation patterns, and temperature distribution, as well as managing Earth's climate.
Learn more about earth:https://brainly.com/question/12041467
#SPJ1
Answer:
The answer is A. Oceans.
Explanation:
I did the test.
How many moles of aspirin (C9H8O4) are contained in 3.13 g of aspirin?
Answer:
The correct answer is - 0.0173888 moles.
Explanation:
Aspirin, C 9 H 8 O 4 , the atomic mass rounded to the nearest whole number, so: c- 12 h- 1 o - 16
now multiply these number by how many of each there are in the formula:
c - 12 x 9 = 108
h - 1 x 8 = 8
0 - 16 x 4 = 64
add these numbers up 108 + 8 + 64 = 180
aspirin has a molar mass of
180.g mol ^− 1 . This means that one mole of aspirin will have a mass of 180 g .
You're dealing with 3.13 g of aspirin, which will be equivalent to
3.13 g /180g
= 0.0173888 moles aspirin
3. You will need to make ~0.1 M solutions of one (or more) of the following salts. For each compound, determine (or look up) its molecular weight, and determine the mass necessary to make 100.0 mL of 0.100 M solution. Pay attention to significant figures! Sodium acetate anhydrous Sodium acetate trihydrate Iron(III) chloride hexahydrate g
Answer: The mass of sodium acetate anhydrous required is 0.820 g
The mass of sodium acetate trihydrate required is 1.36 g
The mass of Iron (III) chloride required is 2.70 g
Explanation:
Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.
[tex]Molarity=\frac{n\times 1000}{V_s}[/tex]
where,
n = moles of solute
= volume of solution in ml
1. moles of =
Now put all the given values in the formula of molarity, we get
[tex]0.100=\frac{x\times 1000}{82.03\times 100.0}[/tex]
[tex]x=0.820g[/tex]
Therefore, the mass of sodium acetate anhydrous required is 0.820 g
2. moles of [tex]CH_3COONa.3H_2O[/tex] = [tex]\frac{\text {given mass}}{\text {Molar mass}}=\frac{xg}{136.08g/mol}[/tex]
Now put all the given values in the formula of molarity, we get
[tex]0.100=\frac{x\times 1000}{136.08\times 100.0}[/tex]
[tex]x=1.36[/tex]
Therefore, the mass of sodium acetate trihydrate required is 1.36 g
3. moles of [tex]FeCl_3.6H_2O[/tex] = [tex]\frac{\text {given mass}}{\text {Molar mass}}=\frac{xg}{g/mol}[/tex]
Now put all the given values in the formula of molarity, we get
[tex]0.100=\frac{x\times 1000}{270.33\times 100.0}[/tex]
[tex]x=2.70g[/tex]
Therefore, the mass of Iron (III) chloride required is 2.70 g
Two objects of equal mass have a force of gravity of 6 N between them. Imagine the mass of one is cut in half and the other stays the same, what is the force due to gravity?
Answer:
F' = 3 N
Explanation:
Given that,
Two objects of equal mass have a force of gravity of 6 N between them.
If the mass of one is cut in half and the other stays the same such that,
m₁' = m₁ and m₂' = (m₂/2)
We need to find the new force. The gravitational force between two objects is given by :
[tex]F=G\dfrac{m_1m_2}{r^2}[/tex]
We have, F = 6 N
New force,
[tex]F'=G\dfrac{m_1'm_2'}{r^2}\\\\F'=\dfrac{Gm_1\times \dfrac{m_1}{2}}{r^2}\\\\=\dfrac{1}{2}\times \dfrac{Gm_1m_2}{r^2}\\\\F'=\dfrac{F}{2}\\\\F'=\dfrac{6}{2}\\\\F'=3\ N[/tex]
So, the new force becomes 3 N.
Calculate the pH of a solution containing 25 g of barium hydroxide (171.34 mel) dissolved in 250 mL of
solution.
Answer:
14
Explanation:
Step 1: Calculate the moles corresponding to 25 g of Ba(OH)₂
The molar mass of Ba(OH)₂ is 171.34 g/mol.
25 g × 1 mol/171.34 g = 0.15 mol
Step 2: Calculate the molar concentration of Ba(OH)₂
Molarity is equal to the moles of solute divided by the liters of solution.
[Ba(OH)₂] = 0.15 mol/0.250 L = 0.60 M
Step 3: Calculate the molar concentration of OH⁻
Ba(OH)₂ is a strong base according to the following equation.
Ba(OH)₂ ⇒ Ba²⁺ + 2 OH⁻
The molar ratio of Ba(OH)₂ to OH⁻ is 1:2. The molar concentration of OH⁻ is 2/1 × 0.60 M = 1.2 M.
Step 4: Calculate the concentration of H⁺
We will use the ionic product of water expression.
Kw = 1.0 × 10⁻¹⁴ = [H⁺] × [OH⁻]
[H⁺] = 1.0 × 10⁻¹⁴/[OH⁻] = 1.0 × 10⁻¹⁴/1.2 = 8.3 × 10⁻¹⁵ M
Step 5: Calculate the pH of the solution
We will use the definition of pH.
pH = -log [H⁺] = -log 8.3 × 10⁻¹⁵ = 14
How many molecules of H20 are present in 7.30 g of water?
Answer:
2.44×10²³ molecules
Explanation:
From the question given above, the following data were obtained:
Mass of H₂O = 7.30 g
Number of molecules of H₂O =?
From Avogadro's hypothesis:
1 mole of H₂O = 6.02×10²³ molecules
1 mole of H₂O = (2×1) + 16
= 2 + 16
= 18 g
Thus,
18 g of H₂O = 6.02×10²³ molecules
Finally, we shall determine the number of molecules present in 7.3 g of H₂O. This can be obtained as follow:
From Avogadro's hypothesis:
18 g of H₂O = 6.02×10²³ molecules
Therefore,
7.3 g of H₂O = 7.3 × 6.02×10²³ / 18
7.3 g of H₂O = 2.44×10²³ molecules
Thus, 7.3 g of H₂O contains 2.44×10²³ molecules
Which factors were affected by the breakup of the supercontinent Pangaea? Check all that apply.
the shape of Earth’s orbit
global wind patterns
ocean currents
the tilt of Earth’s axis
global climates
Answer:
Global wind patterns
Ocean currents
Global climates
Explanation:
Edge2021 correct
The factors that were affected by the breakup of the supercontinent Pangaea include global wind patterns, ocean currents, and global climates.
What was Pangea?The Pangea was a super-landmass that originally gave rise to all continents on the Earth planet.
According to the theory of continental drift, the Pangea break up millions of years ago to generate the continents.
This theory (continental drift) has been replaced by the tectonic plate model, but the idea of Pangea has still support in the scientific community.
In conclusion, the factors that were affected by the breakup of the supercontinent Pangaea include global wind patterns, ocean currents, and global climates.
Learn more about the Pangea here:
https://brainly.com/question/1557027
Plzzzzz help me to solve this question.
Answer:
Explanation:
A1. Chemical indicator, any substance that gives a visible sign, usually by a colour change, of the presence or absence of a threshold concentration of a chemical species, such as an acid or an alkali in a solution. An example is the substance called methyl yellow, which imparts a yellow colour to an alkaline solution.
A2. The reaction of an acid with a base is called a neutralization reaction. The products of this reaction are a salt and water. ... For example, the reaction of hydrochloric acid, HCl, with sodium hydroxide, NaOH, solutions produces a solution of sodium chloride, NaCl, and some additional water molecules
A3. Methyl orange has the property to color alkaline and neutral water yellow. If the water becomes acidic, it turns red immediately.
pls help What are the benefits and limitations of scientific experiments and investigations?
Select the correct structure that
corresponds to the name.
3-bromo-6-methyl-4-octene
CHE
A
Br
B.
CH3CH2CHBrCH = CHCH(CH3)CH2CH3
C. both
Someone please help
Answer:
b
Explanation:
one clue is the double bond at 4 carbon c=c
The correct structure that corresponds to the name.
3-bromo-6-methyl-4-octene is [tex]$\mathrm{CH}_{3} \mathrm{CH}_{2} \mathrm{CHBrCH}=\mathrm{CHCH}\left(\mathrm{CH}_{3}\right) \mathrm{CH}_{2} \mathrm{CH}_{3}$[/tex] .
What is 3-bromo-6-methyl-4-octene?The molecule in which bromine is attached with C-3 carbon and double present at C-4 carbon containing total number of 8 carbon atom can be considered as 3-bromo-6-methyl-4-octene.
What is structure?
A chemist specifies the molecular geometry and, where possible and required, the electronic structure of such given molecule as well as other solid during a chemical structure determination.
It can be seen that in molecule [tex]$\mathrm{CH}_{3} \mathrm{CH}_{2} \mathrm{CHBrCH}=\mathrm{CHCH}\left(\mathrm{CH}_{3}\right) \mathrm{CH}_{2} \mathrm{CH}_{3}$[/tex] bromine is attached with C-3 carbona and double bond exist at C-4 carbon. the total number of carbon atom is 8.
therefore, the structure of the compound will be [tex]$\mathrm{CH}_{3} \mathrm{CH}_{2} \mathrm{CHBrCH}=\mathrm{CHCH}\left(\mathrm{CH}_{3}\right) \mathrm{CH}_{2} \mathrm{CH}_{3}$[/tex].
To know more about structure of the 3-bromo-6-methyl-4-octene click here.
https://brainly.com/question/4072914.
#SPJ2
When you work out your cells need
Answer:
Waterrrr
Explanation:
H2O
Answer:
Muscle contraction
Explanation:
According to the new study, exercise improves muscle health by renewing its cellular powerhouse: the mitochondria. Mitochondria are crucial to the good functioning of our bodies, as well as to our overall health and longevity. These tiny parts of the cell turn the food we eat into energy.
HELP PLS IL GIVE YOU BRAINLIEST PLS IT BY TODAY AT 7 PLS HELP
Answer:
Calm down is this what you need?
Answer:
calm down, what kind of container and things do you need?
Explanation:
a lewis dot model of a simple hydrocarbon consists of what
Answer:
carbon and hydrogen
Explanation:
the carbon atoms join together to form the frame work of the compound and the hydrogen atoms attach to them in many different configurations
Which months have an average high of 47 degrees Fahrenheit
Answer:
Explanation:
july
At which point on the roller coaster will the car have the greatest amount of Kinetic energy?
Oxalic Acid, a compound found in plants and vegetables such as rhubarb, has a mass percent composition of 26.7% C, 2.24% H, and 71.1% O. Oxalic acid can interfere with respiration and cause kidney or bladder stones. If a large quantity of rhubarb leaves is ingested, the oxalic acid can be toxic. The lethal dose (LD50) in rats for oxalic acid is 375 mg/kg. Rhubarb leaves contain about 0.5% by mass of oxalic acid. (Show your work, using the insert equation tool :) What is the empirical formula of oxalic acid
Answer:
HCO₂
Explanation:
From the information given:
The mass of the elements are:
Carbon C = 26.7 g; Hydrogen H = 2.24 g Oxygen O = 71.1 g
To determine the empirical formula;
First thing is to find the numbers of moles of each atom.
For Carbon:
[tex]=26.7 \ g\times \dfrac{1 \ mol }{12.01 \ g} \\ \\ =2.22 \ mol \ of \ Carbon[/tex]
For Hydrogen:
[tex]=2.24 \ g\times \dfrac{1 \ mol }{1.008 \ g} \\ \\ =2.22 \ mol \ of \ Hydrogen[/tex]
For Oxygen:
[tex]=71.1 \ g\times \dfrac{1 \ mol }{1.008 \ g} \\ \\ =4.44 \ mol \ of \ oxygen[/tex]
Now; we use the smallest no of moles to divide the respective moles from above.
For carbon:
[tex]\dfrac{2.22 \ mol \ of \ carbon}{2.22} =1 \ mol \ of \ carbon[/tex]
For Hydrogen:
[tex]\dfrac{2.22 \ mol \ of \ carbon}{2.22} =1 \ mol \ of \ hydrogen[/tex]
For Oxygen:
[tex]\dfrac{4.44 \ mol \ of \ Oxygen}{2.22} =2 \ mol \ of \ oxygen[/tex]
Thus, the empirical formula is HCO₂