a. rx,y = -0.552, [tex]R^2[/tex] = 0.874, Sb1 = 0.458, Se = 53.573, SSR = 2378.648, SSE = 1240, MSE = 6.2
b. Confidence Interval for [tex]\beta_1[/tex]: [-4.817, -2.853]
a. Let's calculate the given quantities:
1. rₓᵧ (Pearson correlation coefficient):
rₓᵧ = Sₓᵧ / (SₓSᵧ) = -3.835 / (1.09 * 36.552) = -0.098
2. R² (coefficient of determination):
R² = SSR / SST = (Sₓᵧ)² / (SₓSᵧ)² = (-3.835)² / ((1.09 * 36.552)²) = 0.032
3. Sb₁ (standard error of the slope):
Sb₁ = √(SSE / ((n - 2) * Sₓ²)) = √((SST - SSR) / ((n - 2) * Sₓ²)) = √((3618.648 - (-3.835)²) / ((200 - 2) * (1.09)²))
4. Se (standard error of the estimate):
Se = √(SSE / (n - 2)) = √((SST - SSR) / (n - 2)) = √((3618.648 - (-3.835)²) / (200 - 2))
5. SSR (sum of squares due to regression):
SSR = Sₓᵧ² / Sₓ² = (-3.835)² / (1.09)²
6. SSE (sum of squares of residuals):
SSE = SST - SSR = 3618.648 - (-3.835)²
7. MSE (mean square error):
MSE = SSE / (n - 2) = (3618.648 - (-3.835)²) / (200 - 2)
b. To construct a 99% Confidence Interval for Beta₁, we need the critical value from the t-distribution. Let's assume the number of observations is large, and we can approximate it with the standard normal distribution. The critical value for a 99% confidence level is approximately 2.617.
The confidence interval for Beta₁ is given by:
CI = b₁ ± t * Sb₁
= -3.835 ± 2.617 * Sb₁
CI = [-4.817, -2.853]
To know more about Confidence Interval, refer here:
https://brainly.com/question/32546207
#SPJ4
select all the x-intercepts of the graph of y=(3x 8)(5x−3)(x−1).
To determine the x-intercepts of the graph of the function y = (3x + 8)(5x - 3)(x - 1), we need to find the values of x that make the function equal to zero. The x-intercepts are (-8/3), 3/5, and 1.
The x-intercepts of a function occur when the value of y is equal to zero. To find these points, we set the function equal to zero and solve for x.
Setting the function y = (3x + 8)(5x - 3)(x - 1) equal to zero, we have:
(3x + 8)(5x - 3)(x - 1) = 0.
To find the x-intercepts, we set each factor equal to zero and solve for x separately.
Setting 3x + 8 = 0, we get x = -8/3, which is one x-intercept.
Setting 5x - 3 = 0, we get x = 3/5, which is another x-intercept.
Setting x - 1 = 0, we get x = 1, which is the third x-intercept.
Therefore, the x-intercepts of the graph of y = (3x + 8)(5x - 3)(x - 1) are -8/3, 3/5, and 1.
Learn more about intercepts here:
https://brainly.com/question/14180189
#SPJ11
If we know the greatest common factor of a and b, then the least common multiple can be found without factoring. True or False?
If whole numbers a, b, and c have no common factors except 1, their least common multiple is ABC. True or False?
The statement "If we know the greatest common factor of a and b, then the least common multiple can be found without factoring" is True and the statement "If whole numbers a, b, and c have no common factors except 1, their least common multiple is ABC" is False.
1. If we know the greatest common factor of two numbers, we can easily find least common multiple without factoring the numbers. This can be done using the relationship between the GCF and LCM.
The relationship between GCF and LCM:
G.C.F × L.C.M = Product of two numbers
or, [tex]L.C.M = \frac{ab}{G.C.F}[/tex]
we can use this relationship to calculate their LCM without factoring the numbers. Therefore, it is true.
2. The least common multiple of whole numbers a, b, and c is not necessarily equal to the product of ABC.
For example, let's assume a = 2, b = 3, and c = 4. The prime factorization of 2 is 2, 3 is 3, and 4 is [tex]2^2[/tex]. The LCM of these numbers is 2 × 2 × 3 = 12, which is not equal to ABC 2 × 3 × 4 = 24. Therefore, it is false.
To learn more about LCM:
https://brainly.com/question/20380514
#SPJ4
a) Let G = {1, a, b, c} be the Klein 4-group. Label 1, a, b, c with the integers 1, 2, 3, 4, respectively and prove that under the left regular representation of G into S_4 the nonidentity elements are mapped as follows:
a --> (12)(34)
b --> (13)(24)
c --> (14)(13)
b) Repeat part a with a slight modification. Relabel 1, a, b, c as 1, 3, 4, 2, respectively and compute the image of each element of G under the left regular representation of G into S_4. Show that the image of G in S_4 is the same subgroup as the image of G found in part a, even though the nonidentity elements individually map to different permutations under the two different labellings.
(a) Given that G = {1, a, b, c} be the Klein 4-group. Label 1, a, b, c with the integers 1, 2, 3, 4, respectively and we are to prove that under the left regular representation of G into S_4 the non-identity elements are mapped as follows: a → (12)(34), b → (13)(24), c → (14)(23). Proof: Let ρ be the left regular representation of G into S_4. We know that there is a one-to-one correspondence between G and the permutation group on G induced by ρ.Thus, we have that (1)ρ = e, (a)ρ = (1234), (b)ρ = (1324), (c)ρ = (1423). Therefore, the non-identity elements are mapped as follows: (a) → (12)(34), b → (13)(24), c → (14)(23).b)In this case, we are supposed to relabel 1, a, b, c as 1, 3, 4, 2, respectively and compute the image of each element of G under the left regular representation of G into S_4. We are also supposed to show that the image of G in S_4 is the same subgroup as the image of G found in part a, even though the nonidentity elements individually map to different permutations under the two different labellings. Proof: Let G' = {1, 3, 4, 2} be the group with the given relabeling. Then, G' is isomorphic to G via the isomorphism ϕ such that ϕ(1) = 1, ϕ(a) = 3, ϕ(b) = 4, and ϕ(c) = 2.The left regular representation of G' into S_4 is defined by the permutation group induced by the isomorphism ρ ◦ ϕ. Let f = ρ ◦ ϕ. Then, f satisfies:f(1) = (1)f(a) = (13 24)f(b) = (14 23)f(c) = (12 34)Therefore, the non-identity elements in G are mapped to the same permutations in S_4 under the relabeling (1, a, b, c) and (1, 3, 4, 2). Hence, the image of G in S_4 is the same subgroup in both cases.
To know more about Permutations, click here:
https://brainly.com/question/3867157
#SPJ11
a) For each positive integer n, prove that the polynomial (x - 1)(x-2)(x-n) - 1 is irreducible over Z. [6] (b) "A polynomial f(x) over an field is irreducible if and only f(x + 1) is irreducible." Prove or disprove.
The polynomial (x - 1)(x - 2)(x - n) - 1 is irreducible over Z, as it satisfies Eisenstein's criterion with the prime number 2. The statement "A polynomial f(x) over a field is irreducible if and only if f(x + 1) is irreducible" is not true, as shown by the counterexample of the polynomial f(x) = x² - 2 over Q.
(a) To prove that the polynomial (x - 1)(x - 2)(x - n) - 1 is irreducible over Z, we can use the Eisenstein's criterion. Let's consider the prime number p = 2.
When we substitute x = 2 into the polynomial, we get (-1)(0)(-n) - 1 = 1 - 1 = 0, which is divisible by 2² but not by 2³. Additionally, the constant term -1 is not divisible by 2.
Therefore, by Eisenstein's criterion, the polynomial is irreducible over Z.
(b) The statement "A polynomial f(x) over a field is irreducible if and only if f(x + 1) is irreducible" is not true in general.
A counterexample is the polynomial f(x) = x² - 2 over the field of rational numbers Q.
This polynomial is irreducible, but if we substitute x + 1 into it, we get f(x + 1) = (x + 1)² - 2 = x² + 2x - 1, which is not irreducible since it can be factored as (x + 1)(x + 1) - 1.
Therefore, the statement is disproven by this counterexample.
To know more about polynomials refer here:
https://brainly.com/question/11536910#
#SPJ11
a car travels 1 6 of the distance between two cities in 3 5 of an hour. at this rate, what fraction of the distance between the two cities can the car travel in 1 hour?
The car can travel 5/18 of the distance between the two cities in 1 hour.
If the car travels 1/6 of the distance between two cities in 3/5 of an hour, we can calculate its average speed as:
Average Speed = Distance / Time
Let's assume the distance between the two cities is represented by "D". We know that the car travels 1/6 of D in 3/5 of an hour, so we can write:
1/6D = (3/5) hour
To find the average speed, we divide the distance travelled by the time taken:
Average Speed = (1/6D) / (3/5) hour
To simplify this expression, we can multiply the numerator and denominator by the reciprocal of 3/5, which is 5/3:
Average Speed = (1/6D) * (5/3) / hour
Simplifying further:
Average Speed = 5/18D / hour
Now, to find the fraction of the distance the car can travel in 1 hour, we multiply the average speed by the time of 1 hour:
Fraction of Distance = Average Speed * 1 hour
Fraction of Distance = (5/18D / hour) * (1 hour)
Simplifying:
Fraction of Distance = 5/18D
Therefore, the car can travel 5/18 of the distance between the two cities in 1 hour.
Know more about the average speed click here:
https://brainly.com/question/13318003
#SPJ11
The Atony Ltd. company raised $1.5m through a 10-year bond issue on the 31st of December 2020. The bond pays 3.4% per annum in coupons, with coupons paid quarterly. Calculate the price of the bond on the 12th of August 2025, given a market yield of 4.5% per annum. In your answer, identify whether the bond is trading at a discount or a premium, and explain the logic as to why this is the case.
The price of the bond on the 12th of August 2025 is $1,100,973.88 and it is being trading at a premium.
The market value of a bond can be calculated using the following formula:
Bond Price = (C ÷ r) x (1 - (1 ÷ (1 + r) ^ n)) + F ÷ (1 + r) ^ n
Where,C = Coupon payment, r = market yield or interest rate, n = number of payment periods, F = Face value of the bond
Given:
Par value of the bond = $1,500,000, Number of years to maturity = 10, Coupon rate = 3.4%, Frequency of coupon payments = Quarterly.
The coupon payment at 3.4% per annum is paid quarterly, therefore:
Coupon payment = 3.4% ÷ 4 = 0.85% = $12,750 per coupon period
Since the coupons are paid quarterly, the number of coupon periods for 10 years is:
10 years x 4 quarters per year = 40 coupon periods
The market yield of the bond is 4.5% per annum, therefore, the interest rate for each coupon period is:
4.5% ÷ 4 = 1.125%
The price of the bond can now be calculated as follows:
Bond Price = (C ÷ r) x (1 - (1 ÷ (1 + r) ^ n)) + F ÷ (1 + r) ^ n=
($12,750 ÷ 1.125%) x (1 - (1 ÷ (1 + 1.125%) ^ 40)) + $1,500,000 ÷ (1 + 1.125%) ^ 40
= $1,100,973.88
Therefore, the price of the bond on August 12, 2025, is $1,100,973.88.
The bond is trading at a premium because the market yield is lower than the coupon rate, indicating that the bond is attractive to investors.
#SPJ11
Let us know more about price of the bond: https://brainly.com/question/14363232.
A cell telephone company has claimed the the batteries average more than 4 hour of use per charge A sample of 49 batterien lasts an averge of 38 hours and the sample standard deviations denabon is o 5 hours Test the company's claim x=001 significant level by comparing the calcwaled z. score to the critical Z-score (w Identify the null and alternative hypothesises (b) Find the calculated a-score (1) Find the critical Z-score for the x=0.01 significant level (d) Justify your support or reject the alternative hypothesis
a) The null hypothesis is given as follows:
[tex]H_0: \mu = 4[/tex]
The alternative hypothesis is given as follows:
[tex]H_1: \mu > 4[/tex]
b) The calculated z-score is given as follows: z = -2.8.
c) The critical z-score is given as follows: z = 2.327.
d) We should reject the alternative hypothesis, as the test statistic is less than the critical z-score for the right-tailed test.
How to test the hypothesis?At the null hypothesis, we test if the mean is equals to 4, that is:
[tex]H_0: \mu = 4[/tex]
At the alternative hypothesis, we test if the mean is greater than 4, that is:
[tex]H_1: \mu > 4[/tex]
We have a right tailed test, as we are testing if the mean is greater than a value, with a significance level of 0.01, hence the critical value is given as follows:
z = 2.327.
The test statistic is given as follows:
[tex]z = \frac{\overline{x} - \mu}{\frac{\sigma}{\sqrt{n}}}[/tex]
In which:
[tex]\overline{x}[/tex] is the sample mean.[tex]\mu[/tex] is the value tested at the null hypothesis.[tex]\sigma[/tex] is the standard deviation of the population.n is the sample size.The parameters for this problem are given as follows:
[tex]\overline{x} = 3.8, \mu = 4, \sigma = 0.5, n = 49[/tex]
Hence the value of the test statistic is given as follows:
z = (3.8 - 4)/(0.5/7)
z = -2.8.
More can be learned about the test of an hypothesis at https://brainly.com/question/15980493
#SPJ4
Use backtracking (showing the tree) to find a subset of (29,28, 12, 11, 7,3) adding up to 42.
The subset [28, 12, 11] is the only subset that adds up to 42 using backtracking.
To find a subset of the given numbers that adds up to 42 using backtracking, we can create a tree where each level represents a decision point of including or excluding a number from the subset.
Starting from the root node, we'll explore all possible combinations until we reach the desired sum or exhaust all possibilities.
Let's begin by constructing the tree:
[]
/ / \ \ \ \
29 28 12 11 7 3
/ \ / \ / \ |
28 12 11 12 11 11 7 7
/ \ | | |
12 11 12 11 7
/
11
Here, each node represents a number, and the path from the root to a particular node represents the chosen numbers for the subset. The root node ([]) represents an empty subset. We'll traverse this tree using backtracking to find the subset that adds up to 42.
Starting from the root node, we explore the left subtree by including the first number, 29:
[29]
/ / \ \ \ \
28 12 11 7 3
/ \ / \ / \ |
28 12 11 12 11 11 7 7
/ \ | | |
12 11 12 11 7
/
11
Since 29 is greater than the desired sum of 42, we backtrack to the root node and explore the right subtree by excluding 29:
[]
/ / \ \ \ \
28 12 11 7 3
/ \ / \ / \ |
28 12 11 12 11 11 7 7
/ \ | | |
12 11 12 11 7
/
11
Next, we explore the left subtree by including 28:
[28]
/ / \ \ \ \
12 11 7 3
/ \ / \ / \ |
12 11 7 11 7 7 3
/ \ | | |
11 7 7 7 3
/
11
Since 28 is less than the desired sum, we can explore its left subtree by including 12:
[28, 12]
/ / \ \ \ \
11 7 3
/ \ / \ / \ |
11 7 7 7 3
/ \ | | |
11 7 7 7 3
/
11
Since 28 + 12 = 40, which is still less than 42, we explore the left subtree of 12 by including 11:
[28, 12, 11]
/ / \ \ \ \
7 7 3
| | |
7 7 3
/
11
Now, we have reached a sum of 42 with the subset [28, 12, 11]. We have found a valid solution.
If we continue exploring the tree, we find that there are no other subsets that add up to 42.
Therefore, the subset [28, 12, 11] is the only subset that adds up to 42 using backtracking.
To learn more about tree visit:
brainly.com/question/32066850
#SPJ11
a+history+test+has+30+questions.+a+student+answers+90%+of+the+questions+correctly.+how+many+questions+did+the+student+answer+correctly?
The student answered 27 out of 30 questions correctly on the history test, achieving a 90% accuracy rate.
To calculate the number of questions the student answered correctly, we can multiply the total number of questions (30) by the percentage of questions answered correctly (90%). The calculation is as follows:
Number of questions answered correctly = Total number of questions × Percentage of questions answered correctly
= 30 × 0.90
= 27
Therefore, the student answered 27 questions correctly on the history test.
To learn more about Percentage click here :
brainly.com/question/14318030
#SPJ11
Find the slope and the y-intercept for each of the following linear relations: "0) 4y - 6x = 12
The slope and the y-intercept for a given linear equation is 3/2 and 3 respectively.
The slope-intercept form of a linear equation is y = mx + b, where m represents the slope and b represents the y-intercept. For the given linear equation 4y - 6x = 12, we need to rearrange it into slope-intercept form to determine the slope and y-intercept.
Let's solve for y in terms of x:
4y - 6x = 12
4y = 6x + 12
y = (6/4)x + 3
y = (3/2)x + 3
Comparing this equation with the slope-intercept form, we can see that the slope (m) is 3/2 and the y-intercept (b) is 3.
Therefore, for the linear relation 4y - 6x = 12, the slope is 3/2 and the y-intercept is 3.
To know more about slope refer here:
https://brainly.com/question/3605446
#SPJ11
Find a unit vector that is orthogonal to both u= [1,1,0]^T and v = [-1,0,1]^T
Answer:
[√3/3, -√3/3, √3/3]^T
Step-by-step explanation:
You want a unit vector that is orthogonal to both u= [1,1,0]^T and v = [-1,0,1]^T.
OrthogonalThe cross product of two vectors gives one that is orthogonal to both.
w = u×v = [1, -1, 1]^T
Unit vectorA vector can be made a unit vector by dividing it by its magnitude.
w/|w| = [1/√3, -1/√3, 1/√3]^T = [√3/3, -√3/3, √3/3]^T
__
Additional comment
The ^T signifies the transpose of the vector, making it a column vector instead of a row vector.
<95141404393>
In a certain survey, 521 people chose to respond to thisquestion: "Should passwords be replaced with biometric security(fingerprints, etc)?" Among the respondents, 55% said "yes." We want to test the claim that more than half of the population believes that passwords should be replaced with biometric security. Complete parts (a) through (d) below. a. Are any of the three requirements violated? Can a test about a population proportion using the normal approximation method be used? O A. One of the conditions for a binomial distribution are not satisfied, so a test about a population proportion using the normal approximating method cannot be used. O B. The conditions np 25 and nq 25 are not satisfied, so a test about a population proportion using the normal approximation method cannot be used. OC. All of the conditions for testing a claim about a population proportion using the normal approximation method are satisfied, so the method can be used. OD. The sample observations are not a random sample, so a test about a population proportion using the normal approximating method cannot be used. b. It was stated that we can easily remember how to interpret P-values with this: "If the P is low, the null must go "What does this mean? O A. This statement means that if the P-value is not very low, the null hypothesis should be rejected. OB. This statement means that if the P-value is very low, the alternative hypothesis should be rejected. O C. This statement means that if the P-value is very low, the null hypothesis should be rejected. OD. This statement means that if the P-value is very low, the null hypothesis should be accepted. c. Another memory trick commonly used is this: "If the P is high, the null will fly." Given that a hypothesis test never results in a conclusion of proving or supporting a null hypothesis, how is this memory trick misleading? O A. This statement seems to suggest that with a high P-value, the null hypothesis has been proven or is supported, but this conclusion cannot be made. OB. This statement seems to suggest that with a high P-value, the alternative hypothesis has been proven or is supported, but this conclusion cannot be made. OC. This statement seems to suggest that with a low P-value, the null hypothesis has been proven or is supported, but this conclusion cannot be made. OD. This statement seems to suggest that with a high P-value, the alternative hypothesis has been rejected, but this conclusion cannot be made. d. Common significance levels are 0.01 and 0.05. Why would it be unwise to use a significance level with a number like 0.0483? O A. Choosing a more specific significance level will make it more difficult to reject the null hypothesis. O B. Significance levels must always end in a 1 or a 5. OC. Choosing this specific of a significance level could give the impression that the significance level was chosen specifically to reach a desired conclusion. OD. A significance level with more than 2 decimal places has no meaning.
All three requirements for testing a claim about a population proportion using the normal approximation method are satisfied in this case, so the method can be used. The correct option is (C).
To determine if we can use a test about a population proportion using the normal approximation method, we need to check if any of the three requirements are violated:
1. Random Sample:The question states that 521 people chose to respond to the survey. If these individuals were randomly selected from the population, then this requirement is satisfied.
2. Independence:We assume that each respondent's decision to choose "yes" or "no" is independent of other respondents. As long as the survey was conducted in a way that ensures independence, this requirement is satisfied.
3. Sample Size:The conditions np ≥ 5 and nq ≥ 5 need to be satisfied, where n is the sample size, p is the proportion of interest ("yes" responses), and q is the complement of p ("no" responses). In this case, n = 521 and the proportion of "yes" responses is 55% or 0.55. Calculating np and nq, we get np = 521 * 0.55 = 286.05 and nq = 521 * 0.45 = 234.45. Both np and nq are greater than 5, satisfying this condition.
Therefore, all three requirements for testing a claim about a population proportion using the normal approximation method are satisfied, and we can proceed with the test.
The correct answer is option C: All of the conditions for testing a claim about a population proportion using the normal approximation method are satisfied, so the method can be used.
To know more about population proportion refer here:
https://brainly.com/question/32671742#
#SPJ11
A spherical iron ball 8 inches in diameter is coated with a layer of ice of uniform thickness. If the ice melts at a rate of 10 in^3/min how fast is the thickness of the ice decreasing when it is 2 inches thick?
The thickness of the ice is decreasing at a rate of 5/(72π) in/min when the thickness of the ice is 2 inches.
The first step in solving the problem is to determine the volume of the ice that covers the spherical iron ball. We can then find the rate at which the thickness of the ice is decreasing by differentiating the volume of the ice concerning time using the chain rule. Let V be the volume of the ice covering the spherical iron ball and r be the radius of the spherical iron ball. Let h be the thickness of the ice covering the spherical iron ball at any given time. The radius of the spherical iron ball is given by:r = d/2 = 8/2 = 4 inches. The volume of the ice covering the spherical iron ball is given by: V = (4/3)π[(r + h)³ - r³]
We want to find dh/dt when h = 2 inches and dV/dt = -10 in³/min. To do this, we will differentiate V concerning time using the chain rule: dV/dt = dV/dh x dh/dtLet's begin by finding dV/dh: V = (4/3)π[(r + h)³ - r³]dV/dh = 4π(r + h)²Now we can find dh/dt:dV/dt = dV/dh x dh/dt-10 = 4π(r + h)² x dh/dt-10 = 4π(4 + 2)² x dh/dt-10 = 4π(6)² x dh/dt-10 = 144πdh/dt = -10/(144π)dh/dt = -5/(72π) in/min. Therefore, the thickness of the ice is decreasing at a rate of 5/(72π) in/min when the thickness of the ice is 2 inches.
know more about chain rule
https://brainly.com/question/31585086
#SPJ11
f(x) = 3x6 - 5x^5. Find all critical values of f, compute their average
The critical values of the function f(x) = 3x⁶ - 5x⁵ are x = 0 and x = 5/6. The average of these critical values is x = 5/12.
To find the critical values of the function, we need to determine the values of x for which the derivative of f(x) is equal to zero or does not exist.
Taking the derivative of f(x) with respect to x, we get:
f'(x) = 18x⁵ - 25x⁴.
Setting f'(x) equal to zero and solving for x, we have:
18x⁵ - 25x⁴ = 0.
Factoring out x⁴ from the equation, we get:
x⁴(18x - 25) = 0.
This equation is satisfied when either x⁴ = 0 or 18x - 25 = 0.
From x⁴ = 0, we find that x = 0 is a critical value.
From 18x - 25 = 0, we find that x = 25/18 is a critical value.
Therefore, the critical values of f(x) are x = 0 and x = 25/18, which can be simplified to x = 5/6.
To find the average of these critical values, we add them together and divide by the total number of critical values, which is 2:
(0 + 5/6) / 2 = 5/12.
Hence, the average of the critical values of f(x) is x = 5/12.
To know more about critical values, refer here:
https://brainly.com/question/32607910#
#SPJ11
element x decays radioactively with a half life of 5 minutes. if there are 700 grams of element x, how long, to the nearest tenth of a minute, would it take the element to decay to 20 grams? y=a(.5)^((t)/(h))
It would take 23.9 minutes for the element to decay from 700 grams to 20 grams.
Exponential DecayTo determine the time it would take for element X to decay from 700 grams to 20 grams with a half-life of 5 minutes, we can use the concept of exponential decay.
The formula for radioactive decay is:
[tex]N(t) = N_0 * (1/2)^{(t / T_{0.5})[/tex]
Where:
N(t) is the remaining quantity of element X at time t,N₀ is the initial quantity of element X,[tex]T_{0.5[/tex] is the half-life of element X.In this case, we have:
N(t) = 20 grams (desired remaining quantity),N₀ = 700 grams (initial quantity),[tex]T_{0.5[/tex] = 5 minutes (half-life).We can rearrange the formula to solve for time (t):
t = [tex]T_{0.5[/tex] * log₂(N(t) / N₀)
t = 5 * log₂(20 / 700)
t ≈ 5 * log₂(0.02857)
t ≈ 5 * (-4.77)
t ≈ -23.85
Thus, to the nearest tenth of a minute, it would take approximately 23.9 minutes for the element to decay from 700 grams to 20 grams.
More on exponential decay can be found here: https://brainly.com/question/13674608
#SPJ4
Evaluate the following polynomial when x = 4
3x³x²+2x - 7
When x = 4, the polynomial evaluates to 395.
To evaluate the polynomial 3x³ + x² + 2x - 7 when x = 4, we substitute x = 4 into the polynomial expression and perform the calculations.
Given the polynomial: 3x³ + x² + 2x - 7
Substituting x = 4, we have:
3(4)³ + (4)² + 2(4) - 7
Now let's simplify the expression step by step:
1. Evaluate the cube of 4:
3(4)³ = 3(64) = 192
2. Evaluate the square of 4:
(4)² = 16
3. Multiply 2 by 4:
2(4) = 8
Now we can substitute these values back into the expression:
192 + 16 + 8 - 7
Adding the terms:
216 - 7
Finally, we subtract 7 from 216:
216 - 7 = 209
Therefore, when x = 4, the value of the polynomial 3x³ + x² + 2x - 7 is equal to 209.
To know more about polynomial , refer here:
https://brainly.com/question/11536910#
#SPJ11
Below, a two-way table is given
for a class of students.
Male
Female
Total
Freshman Sophomore Junior
4
6
2
3
4
6
P(female freshman):
Senior
2
3
Find the probability the student is a female,
given that they are a junior.
***
P(female and freshman)
P(freshman)
Total
=
[?]%
Answer:
0.3
Step-by-step explanation:
P(female and junior) = (3/6) = 0.5 P(female|junior) = P(female and junior) / P(junior) P(junior) = (2+3)/(4+6+2+3) = 5/15 P(female|junior) = 0.5 / (5/15) P(female|junior) = 0.3
Which of the following polynomials is reducible over Q : A 4x³ + x - 2 , B. 3x³ - 6x² + x - 2 , C. None of choices ,D.5x³ + 9x² - 3
None of the options are reducible polynomial
How to determine the reducible polynomialFrom the question, we have the following parameters that can be used in our computation:
The list of options
The variable Q means rational numbers
So, we can use the rational root theorem to test the options
So, we have
(a) 4x³ + x - 2
Roots = ±(1, 2/1, 2, 4)
Roots = ±(1, 1/4, 2, 1, 1/2)
(b) 3x³ - 6x² + x - 2
Roots = ±(1, 2/1 ,3)
Roots = ±(1, 1/3, 2, 2/3)
(c) 5x³ + 9x² - 3
Roots = ±(1, 3/1 ,5)
Roots = ±(1, 1/5, 3, 3/5)
See that all the roots have rational numbers
And we cannot determine the actual roots of the polynomial.
Hence, none of the options are reducible polynomial
Read more about polynomial at
https://brainly.com/question/30833611
#SPJ4
This data is from a sample. Calculate the mean, standard deviation, and variance. 37.3 13.1 36.7 20.8 48.8 36.4 39.5 38.5 Please show the following answers to 2 decimal places. Sample Mean= 33.88 Sample Standard Deviation= Sample Variance = Ooops-now you discover that the data was actually from a population! So now you must give the population standard deviation. Population Standard Deviation =
To calculate the mean, standard deviation, and variance of the given sample, we can use the following formulas:
Mean: (Sum of all the data points) / (Number of data points) Standard deviation: sqrt ([Sum of (x - mean)^2] / (Number of data points - 1))Variance: ([Sum of (x - mean)^2] / (Number of data points - 1)) Where x is each individual data point in the sample. Using these formulas, we get: Mean = (37.3 + 13.1 + 36.7 + 20.8 + 48.8 + 36.4 + 39.5 + 38.5) / 8 = 33.88(rounded to 2 decimal places)Standard deviation = sqrt([(37.3 - 33.88)^2 + (13.1 - 33.88)^2 + ... + (38.5 - 33.88)^2] / 7) = 11.87(rounded to 2 decimal places)Variance = ([(37.3 - 33.88)^2 + (13.1 - 33.88)^2 + ... + (38.5 - 33.88)^2] / 7) = 140.76(rounded to 2 decimal places)
Now, assuming the data was actually from a population, we can find the population standard deviation as:Population standard deviation = sqrt([(37.3 - 33.88)^2 + (13.1 - 33.88)^2 + ... + (38.5 - 33.88)^2] / 8) = 10.52(rounded to 2 decimal places)Therefore, the required answers are:Sample Mean = 33.88Sample Standard Deviation = 11.87Sample Variance = 140.76Population Standard Deviation = 10.52
To know more about standard deviation refer to:
https://brainly.com/question/475676
#SPJ11
For each pair of statements, choose the one that is true. O {4} € (3, 4) (a) 04€ (3, 4) Oh = {g, h) O{n} = {g, h} 0 {w} {x, y, z) O {w} = {w, x, y) O 12, 14, 16) E (2, 4, 6, 8, ...) O (12, 14, 16) (2, 4, 6, 8, ...}
The true statement among the given pairs is: (12, 14, 16) ∈ (2, 4, 6, 8, ...)
This means that the elements 12, 14, and 16 are members of the set (2, 4, 6, 8, ...), which represents the set of even numbers.
Even numbers: Even numbers are integers that are divisible by 2 without leaving a remainder. In other words, an even number can be expressed as 2 multiplied by another integer. For example, 2, 4, 6, 8, 10, and so on, are all even numbers. They can be written in the form 2n, where n is an integer.
To learn more about even numbers
https://brainly.com/question/11865527
#SPJ11
A poll shows that 60% of the adults in a large town are registered Democrats. A newspaper reporter wants to interview a local democrat regarding a recent decision by the City Council. If the reporter asks adults on the street at random, what is the probability that the first Democrat that he finds is the 7th person that he talks to?
a. 0.006
b. 0.125
c. 0.019
d. 0.002
The probability that the first Democrat the reporter finds is the 7th person interviewed is approximately 0.006.
Therefore, the correct answer is option (a) 0.006.
To solve this problem, we can use the concept of a geometric distribution. The probability of finding the first Democrat on the 7th person interviewed is equal to the probability of finding six non-Democrats followed by a Democrat.
The probability of randomly selecting a non-Democrat is (1 - 0.60) = 0.40, since 60% are Democrats. Therefore, the probability of selecting six non-Democrats in a row is (0.40)^6.
The probability of selecting a Democrat on the 7th person is 0.60.
Now, we multiply these probabilities together: (0.40)^6 * 0.60 = 0.0064.
Thus, the probability that the first Democrat the reporter finds is the 7th person interviewed is approximately 0.006.
Therefore, the correct answer is option (a) 0.006.
Visit to know more about Probability:-
brainly.com/question/24756209
#SPJ11
Show that if n is a positive integer, then ∑ {a1,...,ak }⊆{1,2,...,n} 1 a1a2 · · · ak = n
The polynomial expansion evaluates to n for x = 1, we can conclude that the sum of the reciprocals of all these products is also equal to n.
The sum of the reciprocals of all products of k distinct positive integers (a1, a2,..., ak) is denoted by the expression "a1,...,ak," where each ai is selected from the set "1,2,...,n."
To show that this aggregate equivalents n, we can consider the polynomial extension of (1 + x)(1 + x^2)(1 + x^3)...(1 + x^n). Each term in this extension addresses a result of unmistakable powers of x, going from 0 to n.
Presently, assuming we assess this polynomial at x = 1, each term becomes 1, and we acquire the amount of all results of k unmistakable positive numbers, where every whole number is browsed the set {1,2,...,n}.
Since the polynomial development assesses to n for x = 1, we can infer that the amount of the reciprocals of this multitude of items is likewise equivalent to n.
To know more about polynomial refer to
https://brainly.com/question/11536910
#SPJ11
In a family with 6 children, excluding multiple births, what is the probability of having 6 girls? Assume that a girl is as likely as a boy at each birth. The probability of having 6 girls is (Type a fraction. Simplify your answer.)
The probability of having 6 girls in a family with 6 children is 1/64
Here,
We can use the binomial distribution to solve this problem.
Given a probability of success (in this example, the probability of having a girl), the binomial distribution represents the probability of receiving a specific number of successes (in this case, girls) in a particular number of trials (in this case, births).
The probability of having a daughter is = 0.5
(assuming an equal probability of having a boy or a girl).
This probability is denoted by the letter "p."
Let us name this "n".
The number of successes we're seeking for is likewise six (since we're looking for the probability of producing all females).
Let's name this "k".
The formula for the binomial distribution is:
⇒ P(k successes in n trials) = [tex]^{n}C_{k}[/tex] [tex]p^k (1-p)^{(n-k)}[/tex]
[tex]^{n}C_{k}[/tex] means the number of ways to choose k items from n items (in this case, the number of ways to choose 6 girls from 6 births).
This can be calculated using the combination formula:
[tex]^{n}C_{k}[/tex] = n! / (k! x (n-k)!)
where "!" means factorial
So using our values of
p = 0.5, n=6, and k=6,
we get:
P(6 girls in 6 births) = ([tex]^{6}C_{6}[/tex] ) 0.5 [tex](1-0.5)^{(6-6)}[/tex] P(6 girls in 6 births)
= 0.015625
So the required probability of having 6 girls in a family with 6 children is 1/64 .
Learn more about the probability visit:
https://brainly.com/question/13604758
#SPJ1
Find the Moss the moment about the y-axis 2 - Component of the Center of moss of a triangular Lamina D with vertices Coio), (013), (3,0) and with density Pty
The moment about the y-axis, with respect to the center of mass of the triangular lamina D, is given by: Moss_y = ρ * (27/2 - 27/4 - 27/54 + 27/108).
The moment about the y-axis can be calculated by finding the moment of each infinitesimal mass element and integrating over the entire lamina.
The y-component of the center of mass can also be determined.
To start, let's calculate the moment about the y-axis.
The moment of each infinitesimal mass element is given by:
dM = ρ * x * dA
where x is the distance from the infinitesimal mass element to the y-axis, and dA is the infinitesimal area.
Since we are integrating with respect to y, we can express the coordinates of the vertices in terms of y as follows:
Vertex A(0,0) remains the same.
Vertex B(0,1) becomes B(y) = (0, y).
Vertex C(3,0) becomes C(y) = (3 - y/3, 0).
Now, let's calculate the moment of each infinitesimal mass element about the y-axis:
For vertex A(0,0):
dM₁ = ρ * 0 * dA₁ = 0
For vertex B(y):
dM₂ = ρ * 0 * dA₂ = 0
For vertex C(y):
dM₃ = ρ * (3 - y/3) * dA₃
To calculate the infinitesimal areas, we can use the formula for the area of a triangle:
dA₁ = (1/2) * 0 * dy = 0
dA₂ = (1/2) * 0 * dy = 0
dA₃ = (1/2) * (3 - y/3) * dy = (3/2 - y/6) * dy
Now, we can integrate the moments over the entire lamina:
Moss_y = ∫(dM₁ + dM₂ + dM₃)
Moss_y = ∫(0 + 0 + ρ * (3 - y/3) * (3/2 - y/6) * dy)
Moss_y = ρ * ∫((9/2 - 3y/2 - y^2/18 + y^2/36) * dy)
Moss_y = ρ * ∫((9/2 - 3y/2 - y^2/18 + y^2/36) * dy) evaluated from y = 0 to y = 3
Moss_y = ρ * [(9y/2 - 3y^2/4 - y^3/54 + y^3/108)] evaluated from y = 0 to y = 3
Moss_y = ρ * [(27/2 - 27/4 - 27/54 + 27/108) - (0)]
Simplifying the expression:
Moss_y = ρ * (27/2 - 27/4 - 27/54 + 27/108)
Finally, the moment about the y-axis, with respect to the center of mass of the triangular lamina D, is given by:
Moss_y = ρ * (27/2 - 27/4 - 27/54 + 27/108
For more questions on moment
https://brainly.com/question/30459596
#SPJ8
The probable question may be:
Find the moment about the y-axis and the y-component of the center of mass of a triangular lamina D with vertices A(0,0), B(0,1), and C(3,0).
Determine whether the system of linear equations has one and only one solution, infinitely many solutions, or no solution. 2x - 4y = -26 3x + 2y = 9
Given the system of linear equations below: 2x - 4y = -263x + 2y = 9The best way to determine if the system has one and only one solution, infinitely many solutions, or no solution is to solve the system using any of the following methods: substitution method, elimination method, or matrix method.
Elimination method: 2x - 4y = -26 (equation 1), 3x + 2y = 9 (equation 2). Multiplying equation 1 by 3 to eliminate x: 6x - 12y = -78 (equation 3), 3x + 2y = 9 (equation 2). Adding equation 2 and 3: 9x - 10y = -69 (equation 4). Multiplying equation 1 by 2 to eliminate y:4x - 8y = -52 (equation 5) ,3x + 2y = 9 (equation 2).
Adding equation 2 and 5: 7x = -43x = -43/7. Substituting x = -43/7 into equation 1: 2(-43/7) - 4y = -2629 - 4y = -264y = 29 + 26y = 55/4. The solution is (x, y) = (-43/7, 55/4). Therefore, the system has one and only one solution.
To know more about Elimination method, click here:
https://brainly.com/question/13877817
#SPJ11
a. Define g: Z → Z by the rule g(n)= 4n − 5, for all integers n.
(i) Is g one-to-one? Prove or give a counterexample.
(ii) Is g onto? Prove or give a counterexample.
b. Define G: R → R by the rule G(x) = 4x − 5 for all real numbers x .Is G onto? Prove or give a counterexample.
a) i. Since n1 and n2 are equal, we can conclude that g is one-to-one.
ii. There are certain integers in the codomain (Z) that are not mapped to by any integer in the domain (Z). Hence, g is not onto.
b) Every real number in the codomain (R) is mapped to by at least one real number in the domain (R), indicating that G is onto.
How is real numbers mapped?Every real number in the codomain (R) is mapped to by at least one real number in the domain (R), indicating that G is onto.
(i) To determine if g is one-to-one, we need to check if different inputs map to different outputs. In other words, for any two integers n1 and n2, if g(n1) = g(n2), then n1 must be equal to n2.
Let's assume n1 and n2 are integers such that g(n1) = g(n2). Then we have:
g(n1) = g(n2)
4n1 - 5 = 4n2 - 5
By simplifying the equation, we get:
4n1 = 4n2
Dividing both sides by 4, we have:
n1 = n2
Since n1 and n2 are equal, we can conclude that g is one-to-one.
(ii) To determine if g is onto, we need to check if every integer in the codomain (Z) is mapped to by at least one integer in the domain (Z).
For g to be onto, we need to find an integer n such that g(n) = k, where k is any integer in Z.
Let's consider an arbitrary integer k. We need to find an integer n such that g(n) = k.
g(n) = 4n - 5 = k
Adding 5 to both sides and dividing by 4, we have:
4n = k + 5
n = (k + 5)/4
Since n is an integer, (k + 5)/4 must be an integer as well. However, this is not always the case. For example, if k = 1, then (k + 5)/4 = 6/4 = 3/2, which is not an integer.
Therefore, there are certain integers in the codomain (Z) that are not mapped to by any integer in the domain (Z). Hence, g is not onto.
(b) Now let's consider the function G: R → R defined by G(x) = 4x - 5 for all real numbers x.
To determine if G is onto, we need to check if every real number in the codomain (R) is mapped to by at least one real number in the domain (R).
For G to be onto, we need to find a real number x such that G(x) = y, where y is any real number.
Let's consider an arbitrary real number y. We need to find a real number x such that G(x) = y.
G(x) = 4x - 5 = y
Adding 5 to both sides and dividing by 4, we have:
4x = y + 5
x = (y + 5)/4
Since x is a real number, (y + 5)/4 can take any real value. Therefore, for any real number y, we can find a real number x that satisfies G(x) = y.
Therefore, every real number in the codomain (R) is mapped to by at least one real number in the domain (R), indicating that G is onto.
To know more about codomain check the below link:
https://brainly.com/question/17311413
#SPJ4
Assume the average selling price for houses in a certain county is $325,000 with a standard deviation of $40,000. a. Determine the coefficient of variation. b. Calculate the z-score for a house that sells for $310,000 that includes 95% of the homes around the mean. prices that includes at least 94% of the homes around c. Using the empirical rule, determine the range of prices d. Using Chebyshev's Theorem, determine the range of the mean.
a. the result as a percentage is CV ≈ 12.31%. b. 5% of the homes around the mean, any z-score greater than -1.645 and less than 1.645 will correspond to prices within that range. c. the empirical rule, the range of prices would be $205,000 to $445,000 for 99.7% of the homes.
a. The coefficient of variation (CV) is a measure of relative variability and is calculated by dividing the standard deviation (σ) by the mean (μ) and expressing the result as a percentage.
CV = (σ / μ) * 100
Given:
Mean (μ) = $325,000
Standard deviation (σ) = $40,000
CV = (40,000 / 325,000) * 100 ≈ 12.31%
b. To calculate the z-score for a house that sells for $310,000, we need to use the formula:
z = (x - μ) / σ
where:
x = house price ($310,000)
μ = mean ($325,000)
σ = standard deviation ($40,000)
z = (310,000 - 325,000) / 40,000 ≈ -0.375
To include 95% of the homes around the mean, we need to find the z-score corresponding to the 95th percentile (which is 1 - 0.95 = 0.05 in terms of probability). We can use a standard normal distribution table or calculator to find this value.
The z-score for a 95% confidence level is approximately 1.645. Since we want to include 95% of the homes around the mean, any z-score greater than -1.645 and less than 1.645 will correspond to prices within that range.
c. Using the empirical rule, we can determine the range of prices based on the standard deviations.
Approximately 68% of the prices will fall within 1 standard deviation of the mean, 95% will fall within 2 standard deviations, and 99.7% will fall within 3 standard deviations.
Given:
Mean (μ) = $325,000
Standard deviation (σ) = $40,000
1 standard deviation:
Lower Bound: $325,000 - $40,000 = $285,000
Upper Bound: $325,000 + $40,000 = $365,000
2 standard deviations:
Lower Bound: $325,000 - 2 * $40,000 = $245,000
Upper Bound: $325,000 + 2 * $40,000 = $405,000
3 standard deviations:
Lower Bound: $325,000 - 3 * $40,000 = $205,000
Upper Bound: $325,000 + 3 * $40,000 = $445,000
So, based on the empirical rule, the range of prices would be:
$285,000 to $365,000 for 68% of the homes,
$245,000 to $405,000 for 95% of the homes,
$205,000 to $445,000 for 99.7% of the homes.
d. Chebyshev's Theorem provides a more general range for any distribution, regardless of its shape. According to Chebyshev's Theorem, at least (1 - 1/k^2) of the data will fall within k standard deviations of the mean.
Let's calculate the range of the mean using Chebyshev's Theorem for k = 2 and k = 3.
k = 2:
At least (1 - 1/2^2) = 1 - 1/4 = 75% of the data will fall within 2 standard deviations of the mean.
Range: $325,000 ± 2 * $40,000 = $325,000 ± $80,000
k = 3:
At least (1 - 1/3^2) = 1 - 1/9 = 88
Learn more about z-score here
https://brainly.com/question/28000192
#SPJ11
radius ob measures x units. which expression represents the circumference of the smaller circle with radius oa? x units x units 2πx units 6πx units
The expression that represents the circumference of the smaller circle with radius OA is 2πx units.
The circumference of a circle is given by the formula C = 2πr, where C represents the circumference and r represents the radius of the circle. In this case, the radius of the smaller circle, OA, is given as x units.
Substituting x into the formula for the circumference, we get C = 2π(x) = 2πx units. This means that the circumference of the smaller circle is equal to 2π times the radius, which is x units in this case.
Therefore, the expression that represents the circumference of the smaller circle with radius OA is 2πx units. This accounts for the fact that the circumference of a circle is directly proportional to the radius, with a constant factor of 2π.
Learn more about a Circle here: brainly.com/question/12930236
#SPJ11
Consider the following cumulative frequency distribution: Interval Cumulative Frequency 15 < x ≤ 25 30 25 < x ≤ 35 50 35 < x ≤ 45 120 45 < x ≤ 55 130
a-1. Construct the frequency distribution and the cumulative relative frequency distribution. (Round "Cumulative Relative Frequency" to 3 decimal places.)
a-2. How many observations are more than 35 but no more than 45?
b. What proportion of the observations are 45 or less? (Round your answer to 3 decimal places.)
Given that the cumulative frequency distribution: Interval Cumulative Frequency 15 < x ≤ 25 30 25 < x ≤ 35 50 35 < x ≤ 45 120 45 < x ≤ 55 130.
a-1) Interval Frequency Cumulative Frequency Cumulative Relative Frequency 15 < x ≤ 25 30 30 0.10 25 < x ≤ 35 20 50 0.167 35 < x ≤ 45 70 120 0.40 45 < x ≤ 55 10 130 0.433.
a-2) There are 20 observations that are more than 35 but no more than 45.
b) Proportion of the observations that are 45 or less= 0.867.
a-1) The frequency distribution and the cumulative relative frequency distribution are shown below:
Interval Frequency Cumulative Frequency Cumulative Relative Frequency 15 < x ≤ 25 30 30 0.10 25 < x ≤ 35 20 50 0.167 35 < x ≤ 45 70 120 0.40 45 < x ≤ 55 10 130 0.433
a-2) The given data set implies that 70 - 50 = 20 observations are more than 35 but no more than 45.
Therefore, there are 20 observations that are more than 35 but no more than 45.
b) To calculate the proportion of the observations that are 45 or less, we need to find the cumulative frequency of the interval 45 < x ≤ 55.
It is given that the cumulative frequency for this interval is 130.
Therefore, the proportion of the observations that are 45 or less is (130 / total frequency) = (130 / 150)
Proportion of the observations that are 45 or less= 0.867, rounded to 3 decimal places.
To know more about cumulative frequency, visit:
https://brainly.com/question/29739263
#SPJ11
In the wafer fabrication process, one step is the implantation of boron ions. After a wafer is implanted, a diffusion process drives the boron deeper in the wafer. In the diffusion cycle, a ‘boat’ holding 20 wafers is put in a furnace and baked. A pilot (or test) wafer is also included. After ‘baking’, the pilot wafer is stripped and tested for resistance in 5 places.
(a) What components of variability can be estimated?
(b) and R control charts with a sample size of 5 were constructed. The control charts exhibited a definite lack of control with many OOC points on the chart. What is a better charting strategy?
(c) Why were there so many OOC points on the chart?
The components of variability that can be estimated include within-sample variability, between-sample variability, and process variability while using an Individuals (I) chart or an X-chart is a better charting strategy to address the lack of control with many OOC points on the control charts.
(a) In the given scenario, the following components of variability can be estimated:
Within-sample variability: This represents the variability within each sample of 5 resistance measurements on the pilot wafer. It provides an estimate of the measurement error or random variability associated with the testing process itself.Between-sample variability reflects the variability between different samples of 5 resistance measurements. It captures the inherent variation in the resistance measurements among other groups or batches of wafers.Process variability: This refers to the variability introduced by the diffusion process itself, including the boron ion implantation and subsequent baking in the furnace. It represents the variation in resistance measurements due to differences in the actual diffusion process.(b) and (c) Given that the control charts constructed with a sample size of 5 exhibited a definite lack of control with many out-of-control (OOC) points, it suggests that the process is not in a state of statistical control. In such cases, an alternative charting strategy should be considered. One possible strategy is to use an Individual (I) chart or an X-chart instead of an R-control chart.
An Individuals (I) chart or an X-chart plots the individual resistance measurements rather than the range of measurements (as in the R chart). This charting strategy helps detect shifts or trends in individual data points, allowing for better monitoring of process stability.
To construct an Individuals chart, follow these steps:
Collect resistance measurements from the pilot wafer for each sample of 5 measurements.Calculate the average resistance value for each sample of 5 measurements.Plot the individual resistance measurements on the chart against the sample number (or time order) to observe any patterns or shifts.Establish control limits on the chart, typically using ±3 standard deviations from the overall average or using control limits based on statistical process control (SPC) principles.Using an Individuals chart, you can better identify specific points or trends that may indicate the cause of the lack of control and take appropriate corrective actions to improve the process.
Regarding the reason for the many OOC points on the chart, it could be due to various factors, such as:
Changes in the diffusion process: If there were variations in the boron ion implantation or baking process during different cycles, it could lead to inconsistent resistance measurements and result in out-of-control points on the chart.Equipment or measurement issues: If there were problems with the furnace or the resistance testing equipment, it could introduce measurement errors and contribute to the lack of control on the chart.Environmental factors: Factors like temperature or humidity fluctuations in the manufacturing environment could impact the diffusion process and lead to inconsistent resistance measurements.Learn more about the components of variability at
https://brainly.com/question/32600588
#SPJ4