Answer: Excessive drinking by adolescents aged 20 and younger has been related to brain injury and impaired brain function, according to medical studies. Early drinking before the age of 21 raises the risk of potential substance misuse, traffic accidents, and attacks, among other alcohol-related concerns.
Answer:
Here's a thesis to get you started! Hope this helps.
Explanation:
Thesis:
Drinking is harmful to people of all ages because it deteriorates your motor skills it spikes your blood sugar levels.
Crescent Moons Consider the two views of the crescent moon in the figure to the right. The moon can have either of these two appearances just above either the east or west horizon depending on... (i) the time of day whether the moon is waxing or waning 1. Rotate your person so that it is just after sunset. a. Which crescent moon can the person see above the horizon at this time? Waxing or waning? b. Which figure does the person see (i) or (ii)? (Hint: from the person's view, is the horizon closer to the lit side or the dark side?) c. At which horizon is the moon? East or West? 2. Rotate your person so that it is just before sunrise. a. Which crescent moon can the person see above the horizon at this time? Waxing or waning? b. Which figure does the person see (i) or (ii)? (Hint: from the person's view, is the horizon closer to the lit side or the dark side?) c. At which horizon is the moon? East or West? 3. When the moon is a waxing crescent, someone sees view (ii) just above the horizon. a. What time is it? b. At what horizon is the moon? 4. When the moon is a waning crescent, someone sees view (ii) just above the horizon. a. What time is it? b. At what horizon is the moon? Dark Side of the Moon 1. At any time, how much of the moon's entire surface is illuminated by the sun? 2. The moon has a side that always faces the earth (near side). The other side of the moon always faces away from the earth (far side, only visible by spacecraft going around the moon). Is the far side of the moon always completely dark, or can it be lit up even though we can't see it? Explain.
The appearance of the crescent moon above the horizon depends on the time of day and whether the moon is waxing or waning. The person's view of the moon will differ when it is just after sunset compared to just before sunrise.
Here are the explanations:
1. Just after sunset:
a. The person can see a waxing crescent moon above the horizon at this time.
b. The person sees Figure (i) since the lit side of the moon is closer to the horizon than the dark side.
c. The moon is above the western horizon.
2. Just before sunrise:
a. The person can see a waning crescent moon above the horizon at this time.
b. The person also sees Figure (i) because, from their perspective, the lit side is closer to the horizon.
c. The moon is above the eastern horizon.
3. When the moon is a waxing crescent:
a. The person sees view (ii) just above the horizon.
b. It is around evening time, after sunset.
c. The moon is above the western horizon.
4. When the moon is a waning crescent:
a. The person sees view (ii) just above the horizon.
b. It is around early morning time, just before sunrise.
c. The moon is above the eastern horizon.
Dark Side of the Moon:
1. At any time, only a portion of the moon's surface is illuminated by the sun. The amount of illuminated surface varies based on the moon's phase.
2. The far side of the moon, also known as the "dark side," is not always completely dark. Although we cannot see it from Earth, it receives sunlight just like the near side. The far side can be lit up depending on the moon's position in its orbit around the Earth and its orientation relative to the sun. Spacecraft that orbit or land on the moon's far side can observe and capture images of the illuminated portion, revealing its hidden beauty and characteristics.
To know more about the crescent moon click here:
https://brainly.com/question/30563053
#SPJ11
Which of the following is NOT one of the five types of processes associated with denudation.
erosion
transportation
deposition
sloping
The correct option is D, Sloping is not one of the five types of processes associated with denudation.
Denudation is the process of wearing away or stripping off the Earth's surface materials, including rocks, soils, and vegetation, through various natural agents. It is a fundamental aspect of the geomorphic cycle and plays a crucial role in shaping the Earth's landscape over time. Denudation processes are driven by factors such as weathering, erosion, and mass wasting.
Weathering, which includes physical, chemical, and biological processes, breaks down rocks and minerals into smaller particles. Erosion involves the transport of these weathered materials by agents like water, wind, or ice. Mass wasting refers to the downslope movement of materials under the influence of gravity. These denudation processes can result in the formation of landforms such as valleys, canyons, cliffs, and sediment deposits.
To know more about Denudation refer to-
brainly.com/question/31631995
#SPJ4
When would you want to search by a specific field?
Group of answer choices
When you have the citation for an article
When you know the title of an article
All of these
When you know the author of a book
Searching by a specific field is useful in various situations, such as when you have the citation for an article, know the title of an article, or know the author of a book.
Searching by a specific field refers to narrowing down your search within a specific category or criterion. It allows you to focus your search and retrieve more relevant results.
When you have the citation for an article, knowing the specific field, such as the journal or publication name, volume, and page numbers, enables you to locate the article more accurately.
Similarly, when you know the title of an article, searching by the title field can help you find the desired article directly.
Additionally, when you know the author of a book, searching by the author field allows you to find books written by that specific author. In summary, searching by a specific field is beneficial in various scenarios to enhance the efficiency and accuracy of your search.
To learn more about book click here: brainly.com/question/28339193
#SPJ11
Which of the following is the best description of configuration management?
a. a thorough change control system to ensure the project produces the desired results
b. a system used to store versions of software code
c. a system used to store versions of documentation on a project
d. a piece of an automated project management system used to set up project variables
Configuration management refers to a system used to store versions of software code. Option b is correct.
This system is crucial because it allows developers to collaborate effectively. Since it is possible for different developers to work on the same piece of code, configuration management helps ensure that the latest version is always available. In the absence of configuration management, it is difficult to track changes that are made to the code.
Configuration management also provides a safety net in the event that the code is lost, since it is stored in a centralized repository. Overall, configuration management is essential to the software development process because it helps developers work together and ensures the quality of the final product.
Therefore, option (b) is correct.
Learn more about configuration management https://brainly.com/question/13484609
#SPJ11
describe and give an example of Temperate deciduous forest
Temperate deciduous forest can be described as a biome or a type of vegetation characterized by trees that lose their leaves during winter and grow them back in the spring.
This forest covers most of the eastern part of the United States, Europe, parts of Asia, and Eastern China.The temperature range is moderate, with distinct seasons: cold winters and warm summers. The rainfall in these forests is moderate and ranges from 30 to 60 inches annually. These forests typically have four distinct seasons, with temperatures varying between -30 degrees Celsius and 30 degrees Celsius.
The most common tree species found in temperate deciduous forests include oak, maple, beech, birch, and elm, among others.
Example of Temperate deciduous forest:The temperate deciduous forest biome includes examples such as the North American deciduous forest, the European deciduous forest, and the Asian deciduous forest.
These forests can be found in the eastern United States, China, Japan, and Europe. They include hardwood trees that grow tall and can live for a long time. Examples include oaks, elms, hickories, and maple trees. These forests also have a thick understory that is home to many different types of animals, including deer, rabbits, and birds.
To know more about forests ,visit
https://brainly.com/question/28724320
#SPJ11
Freak waves usually produced by undersea disturbances are called Select one: a. moraines b. grottos c. moulins d. tsunamis Which of the following is NOT one of the three main criteria that must be examined when choosing an appropriate map Select one: a. projection b. water. c. scale d. theme Vertically developed puffy and globular clouds are classed as Select one: a. cumuliform. b. cirriform. c. stratiform. d. stratocumuliform. e. nimbocirriform.
In the first question, freak waves produced by undersea disturbances are called tsunamis. In the second question, water is NOT one of the three main criteria that must be examined when choosing an appropriate map.
The three main criteria for selecting an appropriate map are projection, scale, and theme. In the third question, vertically developed puffy and globular clouds are classed as cumuliform. Freak waves produced by undersea disturbances are known as tsunamis.
Tsunamis are large ocean waves typically caused by undersea earthquakes, volcanic eruptions, or landslides. These waves can travel across vast distances, rapidly building up in height as they approach the coastline, and can cause significant devastation when they make landfall.
When choosing an appropriate map, the three main criteria that must be examined are projection, scale, and theme. Projection refers to the method used to represent the curved surface of the Earth on a flat map, impacting the accuracy and distortion of the depicted features.
To learn more about Freak waves : brainly.com/question/6784019
#SPJ11
Which is the greatest environmental problem that the world faces today?
The greatest environmental problem the world faces today is climate change. It refers to long-term shifts in temperature and weather patterns caused primarily by human activities, especially the burning of fossil fuels.
Climate change leads to a range of severe consequences such as rising global temperatures, melting ice caps, more frequent and intense natural disasters, and the loss of biodiversity. It poses significant risks to ecosystems, human health, and the stability of societies worldwide. Urgent and coordinated actions are necessary to mitigate greenhouse gas emissions, transition to renewable energy sources, conserve natural resources, and adapt to the changing climate.
One of the major consequences of climate change is the increase in extreme weather events, including heatwaves, hurricanes, floods, and droughts. These events are becoming more frequent and intense, causing widespread destruction, displacement of people, and loss of life.
To learn more about Climate change :brainly.com/question/32532670
#SPJ11
Radio-carbon dating is accurate up to 75,000 years. Why would longer date range?
Radio-carbon dating is an important tool for archeologists and scientists to determine the age of organic material. It measures the amount of radioactive carbon-14 in organic material to determine its age.
The accuracy of the technique is dependent on several factors, including the amount of carbon-14 in the material, the environmental conditions and the composition of the sample. Because of this, the accuracy of radio-carbon dating is typically limited to around 75,000 years.
For samples of a greater age, radioactive isotopes decay over a longer period of time may be used to determine a longer date range. For instance, potassium-argon dating is used for age ranges exceeding 100,000 years. This method determines the age of igneous rocks and volcanic ash layers, which unfortunately are not suitable for radio-carbon dating.
In addition, archeological context and record research also provide clues to the age of a sample. For example, coins, buildings, pottery, etc. can provide information about the approximate age of the sample based on its associated artifacts. With this in mind, archaeologists can use these research techniques in combination with radio-carbon dating to determine an accurate date range.
To know more about Radio-carbon dating, click here:
https://brainly.com/question/15386678
#SPJ4
Answer:
Radiocarbon dating is a method used to determine the age of an object containing organic material by measuring the amount of carbon-14 remaining in the object. Carbon-14 is a radioactive isotope that is produced in the atmosphere and taken up by living organisms. When an organism dies, the carbon-14 begins to decay and the amount of carbon-14 in the organism decreases over time. By measuring the amount of carbon-14 remaining in an object, scientists can determine how long ago the organism died.
Explanation:
which phrase of the preamble best reflects concerns raised by shays’ rebellion? ""establish justice"" ""insure domestic tranquility"" ""promote the general welfare"" ""provide for the common defence""
The phrase "insure domestic tranquility" best reflects the concerns raised by Shays' Rebellion. Option b is correct.
Shays' Rebellion was an armed uprising that took place in Massachusetts in 1786-1787. It was led by farmers and rural workers who were experiencing economic hardship and high taxes. They rebelled against the state government's policies, such as foreclosing on farms for unpaid debts.
The rebellion highlighted the concerns regarding domestic unrest and the need to maintain peace and stability within the country. The phrase "insure domestic tranquility" in the Preamble of the United States Constitution reflects the desire to prevent internal conflicts and maintain order within the nation.
Therefore, b is correct.
Learn more about rebellion https://brainly.com/question/13938004
#SPJ11
Put an X next to the situations below that make landslides more likely.
__ A hurricane saturates the ground with water.
__ A wild fire burns plants and trees in the mountains.
__ Plate tectonics cause mountains to get steeper over time.
__ People water yards, causing water to soak into the ground. Check your answers with another group.
Yes, a hurricane saturating the ground with water, a wildfire burning plants and trees in the mountains, and people watering yards can all make landslides more likely.
When the ground is saturated with water, it can become unstable and unable to hold up whatever is on top of it. Additionally, burning and removing vegetation can cause the soil to weaken.
Finally, when people water the ground, the soil becomes heavier, increasing the chances of a landslide. All of these factors can work together to make landslides more likely, which can have damaging impacts on the environment and people's lives.
To know more about hurricane , click here:
https://brainly.com/question/14836473
#SPJ4
As the solar system formed, how did the higher proportion of radioactive elements in the protoplanets influence planetary development?
A. It reinforced the compression caused by gravity.
B. It powered the motion of planets toward their final orbits.
C. It provided a heat source to help drive layer differentiation.
D. It altered the elements so planets would have the same compositions.
Answer:
C. It provided a heat source to help drive layer differentiation.
Explanation:
The higher proportion of radioactive elements in protoplanets aided planetary development by providing a heat source that aided in layer differentiation.
Numerous small bodies known as protoplanets were present during the early stages of the solar system's formation. These protoplanets gradually accumulated mass through collisions and gravitational interactions, eventually maturing into the planets we see today.
Radioactive elements, such as uranium, thorium, and potassium, are unstable and decay radioactively, producing heat as a byproduct. A localised heat source was created because of the presence of these radioactive elements within the protoplanets. As the radioactive elements decayed, they released significant heat energy, contributing to the protoplanet's overall heat budget.
The heat produced by these elements' radioactive decay was critical in driving the process of layer differentiation within the protoplanets. The differentiation of different materials within a planetary body based on their densities is called layer differentiation. The materials within a protoplanet became more molten and wholly or partially melted as the interior heated up due to radioactive decay.
Because of their higher density, heavier elements sank toward the core during this molten state, while lighter elements rose to the surface or formed an intermediate layer. In the case of terrestrial planets like Earth, this process is known as planetary differentiation, and it resulted in the formation of distinct layers such as a metallic core, a rocky mantle, and a crust.
The heat produced by radioactive decay was also crucial in shaping the internal structure of planets. It aided in forming the mantle, a molten or partially molten layer beneath the crust. Convective currents driven by this heat were critical in plate tectonics and material recycling on the planet's surface.
An example of a secondary effect of drought is
Question options:
a drop in groundwater levels
transportation delays
wildfires
high temperatures
Answer:
Transportation delays
Explanation:
briefly describe the environments of mid-nineteenth-century west end london chamber music concerts. be sure to speak about the repertoire programming and the makeup of listeners.
In the mid-nineteenth century, chamber music concerts held in the West End of London provided a unique environment for musical performances.
The environment refers to the natural world and surroundings in which living organisms, including humans, exist. It encompasses the physical, biological, and social factors that influence and shape life on Earth. The environment includes elements such as the atmosphere, landforms, water bodies, ecosystems, and the interactions between them.
The environment plays a crucial role in sustaining life and providing the necessary resources for the survival and well-being of all organisms. It provides clean air, water, and food, as well as habitats for countless species. Moreover, it supports various ecological processes, including nutrient cycling, pollination, and climate regulation.
To know more about Environment refer to-
brainly.com/question/5511643
#SPJ4
VOLCANOES 1. What are the three types of volcanoes? a. b. C. 2. Label each volcano profile with the appropriate name listed above: A B с Letter Volcano Type A B C
3. What type of volcanoes make up:
The three types of volcanoes are not provided in the question. Therefore, a specific answer cannot be given without the names of the volcano types.
The question does not provide the names of the three types of volcanoes. In order to label each volcano profile with the appropriate name, it is necessary to know the specific volcano types being referred to.
Different volcano types include stratovolcanoes (composite volcanoes), shield volcanoes, cinder cone volcanoes, and others. Each volcano type has distinct characteristics in terms of its shape, eruption style, and composition. Without the specific names of the volcano types, it is not possible to accurately label each volcano profile.
To learn more about phenomenon click here: brainly.com/question/6818732
#SPJ11
explain how the chemical weathering feedback works. describe each step of the process. is this feedback positive or negative?
Chemical weathering feedback is an example of a positive feedback loop.
As chemical weathering progresses, minerals in rocks and soil break down into smaller particles that are more susceptible to further chemical weathering. Chemical weathering feedback can result in an increase in the rate and extent of chemical weathering. Here is the process that occurs in the chemical weathering feedback:
Step 1: In this step, chemicals in the environment, such as water or acids, come into contact with rocks and minerals. As the chemical reaction progresses, minerals break down into smaller particles and release ions.
Step 2: In this step, minerals that are released in the first step react with other chemicals in the environment, such as water or other minerals, to produce new minerals.
Step 3: In this step, new minerals are produced, which can then be weathered again by the same or different chemicals. These new minerals are typically more susceptible to weathering than the original minerals, which means that the rate and extent of chemical weathering can increase over time.
Positive feedback occurs when a change in one variable leads to an increase in another variable, which then leads to a further increase in the first variable. In the case of chemical weathering feedback, the breakdown of minerals into smaller particles leads to an increase in the rate and extent of chemical weathering. This leads to further breakdown of minerals and the production of more susceptible minerals, which can then be weathered again. The result is an increase in the rate and extent of chemical weathering, which is a positive feedback loop.
learn more about positive feedback loops: https://brainly.com/question/14724809
#SPJ11
In areas that were major centers of ice accumulation, the land has been slowly:_________
In areas that were major centers of ice accumulation, the land has been slowly rebounding.
This phenomenon, known as glacial isostatic adjustment or post-glacial rebound, is the gradual rise of the Earth's crust in response to the removal of the weight of ice sheets that once covered those regions during the last ice age. It is a geophysical process that continues to occur over thousands of years after the retreat of glaciers.
During the last ice age, large ice sheets covered vast areas of land, exerting enormous pressure on the Earth's crust. As these ice sheets melted and retreated, the weight on the land was lifted, allowing the underlying crust to slowly rise in response to the removal of the ice load. This vertical movement of the land is known as post-glacial rebound or glacial isostatic adjustment.
To learn more about Rebounding : brainly.com/question/14566022
#SPJ11
Which factor affects the size and shape of the barrier island? a. Littoral drift b. Human alterations c. Ocean waves d. Erosion e. All of the above are correct
The correct option is E, The size and shape of a barrier island can be influenced by various factors, including Littoral drift, Human alterations Ocean waves, and Erosion.
Erosion is a natural process that involves the gradual wearing away or removal of the Earth's surface materials, such as soil, rock, or sediment, by various agents like water, wind, ice, or gravity. It is a result of the combined action of weathering and transportation. Erosion can have significant environmental impacts, including the loss of fertile soil for agriculture, the alteration of river courses, the destruction of habitats, and the increased sedimentation of water bodies.
Water erosion occurs when flowing water, such as rivers, streams, or rainfall, carries away soil particles, creating channels, gullies, or even canyons over time. Wind erosion, on the other hand, occurs when strong winds transport and deposit fine particles of soil or sand, leading to the formation of dunes or the removal of topsoil from agricultural fields.
To know more about Erosion refer to-
brainly.com/question/30587260
#SPJ4
At an earthquake measuring station the waves that arrive first come at a speed of 4 km/s and the waves that come second arrive at a speed of 1 km/s. If the time delay between the two waves is 4 seconds. How far is the earthquake's epicenter from the measuring station (round the answer to two decimal places)?
The earthquake's epicenter from the measuring station is approximately 20 km (rounded to two decimal places).
Mentioned that the waves that arrive first at the earthquake measuring station come at a speed of 4 km/s and the waves that come second arrive at a speed of 1 km/s. The time delay between the two waves is 4 seconds. To determine the distance of the earthquake's epicenter from the measuring station, we can apply the formula:
distance = speed x time
Let the distance between the measuring station and the earthquake epicenter be x, and t be the time in seconds it took the first wave to reach the measuring station.
Then, using the formula above, we can express the distance of the epicenter from the measuring station as:
x = 4t --- Equation 1
Also, the distance of the epicenter from the measuring station is given as:
x = (4 + 1) × 4 km = 20 km --- Equation 2
Substituting equation 1 into equation 2 and solving for t, we have:
4t = 20km
⇒ t = 20/4
= 5 seconds
Substitute the value of t into equation 1:
x = 4t = 4 × 5 seconds
= 20 km
Therefore, the distance of the earthquake's epicenter from the measuring station is approximately 20 km (rounded to two decimal places).
Learn more about the Epicenter here: https://brainly.com/question/4052993
#SPJ11
what are two major global changes affecting the biosphere today
Answer: Ozone depletion and global warming.
Explanation: What are the two major global changes affecting the biosphere today? Ozone depletion and global warming. Why is the ozone layer important to living things? The ozone layer absorbs ultraviolet light from the sun which can harm organisms.
Which of the following gives the best evidence for the existence
of dark matter?
A. The orbital speeds of stars in galaxies are higher than what
can be accounted for by the detectable mass in those ga
The orbital speeds of stars in galaxies are higher than what can be accounted for by the detectable mass in those galaxies, providing compelling evidence for the existence of dark matter.
One of the most significant lines of evidence for the existence of dark matter is the observation of high orbital speeds of stars in galaxies. According to Newtonian physics, the orbital speed of a star within a galaxy depends on the mass contained within its orbit. Based on the visible matter in galaxies, such as stars and gas, the orbital velocities should decrease as one moves away from the galactic center due to the decreasing gravitational pull. However, observations have consistently shown that the orbital speeds remain relatively constant or even increase with distance from the galactic center, defying expectations.
This phenomenon can be explained by the presence of an additional unseen mass component, which is dark matter. Dark matter does not interact with light or other electromagnetic radiation, making it invisible to traditional observational techniques. Its gravitational influence, however, affects the motion of stars and galaxies. The gravitational pull from the dark matter component provides the necessary additional mass to explain the high orbital speeds of stars in galaxies.
Various studies, including observations of galaxy rotation curves and gravitational lensing, have consistently shown that the observed gravitational effects in galaxies far exceed what can be accounted for by the visible matter alone. This strongly supports the hypothesis that there is a significant amount of dark matter distributed throughout galaxies, providing the gravitational force required to explain the observed orbital velocities.
While the exact nature of dark matter remains unknown, its presence and influence on the dynamics of galaxies provide compelling evidence for its existence. The orbital speeds of stars in galaxies being higher than what can be accounted for by the detectable mass in those galaxies is a crucial piece of evidence supporting the existence of dark matter.
To know more about galaxies click here:
https://brainly.com/question/31361315
#SPJ11
why do hydrophobic soils promote debris flows and flooding in regions recently burned by wildfires?
Answer:
Hydrophobic soils promote debris flows and flooding in regions recently burned by wildfires because the heat of the fire causes a synthetic waxy coating to form on the soil particles, reducing the soil's ability to absorb water. As a result, when a rainstorm passes through the area, water cannot be absorbed and instead accumulates on the surface, leading to flooding and debris flows.
Explanation:
a rock specimens contains 30 millimoles of potassium and 30 millimoles of argon. the rock must be __________ billion years old.
A rock specimen contains 30 millimoles of potassium and 30 millimoles of argon. the rock must be 1.25 billion years.
Rock is a type of naturally occurring solid material that forms a significant part of the Earth's crust. It is composed of various minerals, organic matter, and other substances. Rocks are classified into three main types: igneous, sedimentary, and metamorphic.
Igneous rocks are formed when molten magma or lava cools and solidifies. They can be further categorized into intrusive rocks (formed beneath the Earth's surface) and extrusive rocks (formed on the Earth's surface). Examples of igneous rocks include granite, basalt, and obsidian. Sedimentary rocks are formed through the accumulation and compaction of sediments over time.
To know more about Rock refer to-
brainly.com/question/29898401
#SPJ4
q18. what did you learn about these emitters (e.g., their identity, the structure of the facility, etc.) by zooming in on them?
These gases upon reaching the atmosphere react with the water to form Nitric and sulfuric acid respectively and falls to earth along with the rain to cause acid rain.
The atmosphere is the layer of gases surrounding a celestial body, such as the Earth. It plays a crucial role in sustaining life and protecting the planet from harmful radiation. Earth's atmosphere is composed primarily of nitrogen (about 78%), oxygen (around 21%), and traces of other gases such as carbon dioxide, argon, and water vapor. It is divided into several layers based on temperature and composition: the troposphere, stratosphere, mesosphere, thermosphere, and exosphere.
The atmosphere serves multiple functions. It regulates the planet's temperature by trapping heat from the Sun and preventing extreme temperature fluctuations between day and night. It also absorbs harmful ultraviolet (UV) radiation, reducing its impact on living organisms. Additionally, the atmosphere helps distribute heat and moisture around the globe, leading to weather patterns and climate systems.
To know more about Atmosphere refer to-
brainly.com/question/32358340
#SPJ4
Which list below contains three rocks that are produced by contact metamorphism? A. Gneiss, quartzite, and anthracite coal B. Quartzite, marble, and hornfels C. Slate, phyllite, and gneiss D. Marble, schist, and slate
Quartzite, marble, and hornfels are three rocks that are produced by contact metamorphism. Thus the correct answer is option B.
Contact metamorphism occurs when rocks come into direct contact with a high-temperature heat source, such as magma or lava. Heat alters the mineral content and texture of the stones, leading to new rock development. The original rock type and the temperature and length of heat exposure determine the specific properties of the rocks formed.
Quartzite is generated as a result of sandstone metamorphism. The tremendous heat forces the sandstone's quartz grains to recrystallize and fuse together, resulting in a rugged, durable rock with a high quartz concentration.
Marble is formed as a result of the metamorphism of limestone or dolomite. The heat forces the minerals in the original rock to recrystallize, resulting in a smooth, granular rock with various hues depending on the impurities present.
Hornfels is a fine-grained, hard rock formed through the metamorphism of numerous geological types, including shale, mudstone, and volcanic rocks. The high temperature changes the minerals in the original stone, resulting in a solid, homogeneous texture and, in some instances, a gleaming look.
To know more about contact metamorphism
brainly.com/question/30244981
late, Phyllite, and Gneiss. Contact metamorphism is an extreme form of regional metamorphism that occurs when preexisting rocks are subjected to high temperatures and pressures.
The answer is C.
This resulting in pronounced changes in their mineral assemblages and textures without any distinct chemical alteration. The most common rocks produced by contact metamorphism are schists, which are formed by the re-crystallization of sedimentary rocks like mudstone, siltstone, and shale under high pressure and temperature.
Slate, phyllite, and gneiss are other types of contact metamorphic rocks that form when these sedimentary rocks are subject to even higher temperatures and pressures. These rocks tend to be extremely hard and may display folds in their layers, revealing the cataclastic origin.
To know more about Contact metamorphism, click here:
https://brainly.com/question/30244981
#SPJ4
question 9.9 which band combination(s) is(are) best for separating urban areas from other forms of land cover (i.e., vegetation, trees, etc.)? why?
In urban areas from other forms of land cover, the best band combination often includes the use of near-infrared (NIR) and red bands. The NIR band is sensitive to vegetation reflectance, while the red band is useful for distinguishing urban areas.
Urban areas refer to regions characterized by high population density and extensive human-made infrastructure. These areas are typically developed and heavily built up, accommodating a significant concentration of residential, commercial, and industrial activities. Urbanization is driven by various factors such as economic opportunities, improved infrastructure, and better access to services.
Urban areas are characterized by tall buildings, roads, transportation networks, utilities, and public amenities like parks, schools, and hospitals. They are often centers of cultural, economic, and political activity, attracting diverse populations and fostering social interactions. Urban areas also exhibit a greater level of diversity in terms of cultures, languages, and lifestyles.
To know more about Urban areas refer to-
brainly.com/question/31535430
#SPJ4
true or false: the wave heights (10 meters) of the 2011 japan tsunami were unprecedented in japan's history, and thus it is understandable that they were not prepared for it.
The statement " the wave heights (10 meters) of the 2011 japan t sunami were unprecedented in Japan's history, and thus it is understandable that they were not prepared for it." is true as Japan t sunami were indeed unprecedented in Japan's history.
The tsunami, which was caused by a significant undersea earthquake, was as high as 10 meters (33 feet) in some places along Japan's northeastern coast. Widespread destruction was caused by these incredibly powerful waves, including the nuclear power plant, infrastructure and coastal communities.
Due to its location in a seismically active area, Japan has a long history of dealing with tsunamis. However, the tsunami of 2011 had a magnitude and intensity that had never been seen before. It was extremely difficult to respond to the disaster effectively due to the unprecedented height of the waves and the speed and force with which they struck the coast which overtaxed the infrastructure and existing preparedness plans.
Learn more about Japan tsunami at:
brainly.com/question/29732702
#SPJ4
A 0. 25mol sample of neon gas at 18 °C and 0. 799atm is heated to 49°C. The new gas pressure is 1. 11atm. What is the change in volume of the neon gas?
The change in volume of the neon gas when a 0.25 mol sample of neon gas at 18 °C and 0.799 atm is heated to 49°C and the new gas pressure is 1.11 atm can be calculated using the combined gas law which states that the pressure of a gas is proportional to its temperature and inversely proportional to its volume.
Using the formula of the combined gas law, we can express the relationship between the initial and final volume, pressure and temperature of the neon gas as shown below:
(P1V1) / T1 = (P2V2) / T2
Substituting the given values, we have:
(0.799 atm × V1) / (18 °C + 273) K = (1.11 atm × V2) / (49 °C + 273) K
Simplifying, we get:
V2 = (0.799 atm × V1 × (49 °C + 273) K) / (1.11 atm × (18 °C + 273) K)
V2 = (0.799 × V1 × 322 K) / 1.11 × 291 K
V2 = (231.988 V1) / 320.01
V2 = 0.724 V1
Hence, the change in volume of the neon gas is -0.276 times its initial volume. This means that the final volume of the gas is approximately 27.6% less than its initial volume.
To know more about volume visit :
https://brainly.com/question/28058531
#SPJ11
Post-glacial rebound in the Great Lakes region shows us that:
(a) large glaciers can cause isostatic sinking of continents;
(b) the spatial extent of the last ice sheet went as far south as Florida;
(c) Hudson Bay (Canada) is presently sinking as Michigan is shifting to the west;
(d) a large mantle plume, or "hot spot", melted the ice sheet at about 1,000 years ago.
The correct option is C) Hudson Bay (Canada) is presently sinking as Michigan is shifting to the west.
Post-glacial rebound in the Great Lakes region shows us that Hudson Bay (Canada) is presently sinking as Michigan is shifting to the west.Post-glacial rebound refers to the upward movement of the Earth's crust following the release of the enormous weight of the glaciers from the last Ice Age. In the Great Lakes region, post-glacial rebound tells us that Hudson Bay (Canada) is presently sinking as Michigan is shifting to the west. This phenomenon is the result of the continued rebound of the land that was once compressed under the weight of the glaciers.In the last Ice Age, enormous glaciers covered much of North America, including the Great Lakes region. These glaciers were so heavy that they caused the underlying land to sink down, a process known as isostatic depression. However, as the glaciers began to recede, the weight on the land was reduced, and the land began to rebound. This process is still occurring today and is responsible for changes in the landscape of the Great Lakes region.
To know more about glaciers:
https://brainly.com/question/28474050
#SPJ11
briefly outline how the following indigenous knowledge aspects jave aided in environmentalsustainability(1) Spritually, (2) history ,(3) cultural practices,( 4) social interaction , (5) Language healing .
Indigenous knowledge aspects such as spirituality, history, cultural practices, social interaction, and language healing aid in environmental sustainability by fostering a deep connection to nature, preserving ecological wisdom, promoting sustainable resource management, fostering community cohesion, and preserving traditional ecological knowledge.
Indigenous knowledge plays a vital role in promoting environmental sustainability through various aspects.
Spirituality instills a profound reverence for nature, recognizing the interconnectedness between humans and the environment, and driving a sense of responsibility toward ecological preservation.Historical knowledge provides insights into traditional ecological practices and wisdom, enabling communities to adapt and apply sustainable approaches to contemporary challenges. Cultural practices rooted in indigenous knowledge emphasize sustainable resource use, conservation, and respect for ecosystems, contributing to the preservation of biodiversity and ecosystems. Social interaction within indigenous communities fosters collective responsibility, promoting communal decision-making processes and cooperative efforts toward sustainable resource management.Language healing safeguards traditional knowledge systems and ecological understanding, ensuring the transmission of invaluable information about local ecosystems, medicinal plants, and sustainable practices.Together, these indigenous knowledge aspects provide a holistic framework for environmental sustainability, enhancing ecological resilience, promoting cultural diversity, and fostering a harmonious relationship between humans and the natural world.
For mor questions on indigenous
https://brainly.com/question/29985611
#SPJ8
which of the following rivers does not flow in a west-to-east fashion across the great plains?
Among the major rivers flowing through the Great Plains, the Missouri River does not flow in a strictly west-to-east fashion.
The Missouri River primarily runs in a north-to-south direction. It originates in the Rocky Mountains of western Montana and flows southward, eventually curving eastward as it enters the Great Plains.
While it does have an eastward component to its course, the overall direction is predominantly north-to-south.
In contrast, rivers like the Platte River and the Arkansas River flow from west to east across the Great Plains, traversing the region horizontally. The Missouri River is a significant tributary of the Mississippi River and plays a crucial role in the overall drainage system of the central United States.
To know more about Missouri River refer to-
https://brainly.com/question/13812183
#SPJ11
Complete question
Which river does not flow in a west-to-east fashion across the great plains?