A ladybug is crawling up a wall at constant speed, as shown above. Which of the following are correct justifications for how forces help the ladybug move up the wall? Select two answers
A constant nonzero net force acts on the ladybug as it moves up the wall.
The ladybug exerts a downward force on the wall to move itself up the wall.
The upward force of the wall on the ladybug moves the ladybug up the wall.
The ladybug exerts an upward force on itself to move it up the wall.

When an ant crawls 500 cm north, 300 cm west, 200 cm south, then 300 cm east, the distance traveled will be 1300cm.

Distance = 500 + 300 + 200 + 300

Distance = 1300cm

In a different sense, the path an object takes to traverse a certain distance while maintaining a specific speed from one point to another is known as the distance travelled. As was previously said, the distance formula combines time, speed, and distance.

Speed times time equals distance.

The entire path an object has taken can be used to define the distance of an object. For instance, if an automobile travels 5 km east, then turns to head north for another 8 km, the final distance will be 13 km.

To know more about distance, visit:

https://brainly.com/question/11567236

#SPJ1

The link between the work function, W, and maximum electron energy, E m an x, for a given wavelength, can be determined using the formula = h max, where h is the Planck constant and c is the speed of light.

The electron moves to a state with higher energy after receiving the energy. The electron absorbs the extra energy and releases it by the opposite process known as emission to return to its ground state. To be in the lowest energy level, an electron requires precisely -13.6 eV of energy.

A material experiences the photoelectric effect when it is subjected to electromagnetic radiation, such as light when electrons are released. They are referred to as photoelectrons.

To learn more about energy emitted by electrons from given link

brainly.com/question/30011257

#SPJ4

Direct emissions from owned or controlled sources are covered by Scope 1. The generation of the purchased electricity, steam, heating, and cooling used by the reporting company is covered by scope 2's indirect emissions. All other indirect emissions that take place along a company's value chain are covered by scope 3.

The most frequent source of Scope 1 emissions is natural gas. Both large manufacturing companies and power companies frequently use it to produce electricity. Other industrial applications include heating, road transportation, and the production of a variety of goods like glass, steel, and plastics.

The organization's global scope 1, 2, and 3 emissions are included in the Net Zero target's perimeter.

To know more about natural gas visit:-

brainly.com/question/3261461

#SPJ4

The flow of blood from into the heart to out of the heart is given as Right atrium→tricuspid valve→right ventricle→pulmonary semilunar valve→pulmonary trunk→pulmonary arteries→lung capillaries→pulmonary veins→left atrium→bicuspid valve→left ventricle→aortic semilunar valve→aorta

The right atrium receives deoxygenated blood from the body through two large veins, the posterior (inferior) and anterior (superior) vena cava.

Through the tricuspid valve, blood is transferred from the right atrium to the right ventricle. Tricuspid valve closure occurs when the ventricle is full to stop blood from returning to the atrium.

Through the pulmonary vein, blood that has been oxygenated by the lungs enters the left atrium.

Blood can go from the left atrium into the left ventricle when the mitral valve is open. When the ventricle is full, the mitral valve closes to prevent blood from returning to the atrium.

Blood may move from the heart to the aorta and from there to the rest of the body thanks to the aortic valve.

To know more about blood circulation:

https://brainly.com/question/14385782

#SPJ4

Quantum physics and Newtonian physics are two different frameworks for understanding the behavior of matter and energy at different scales.

Newtonian physics, also known as classical mechanics, is based on the work of Isaac Newton and describes the motion of macroscopic objects, such as cars, planets, and baseballs. It is based on the principles of mass, force, and acceleration, and it is very successful at predicting the behavior of objects moving at speeds that are not too close to the speed of light.

Quantum physics, on the other hand, is a theory that describes the behavior of matter and energy at the atomic and subatomic scale. It is based on the idea that energy, matter, and the fundamental building blocks of the universe, such as electrons and photons, can exhibit both wave-like and particle-like properties. Quantum physics also introduces the concept of probability, which allows for the prediction of the likelihood of certain outcomes but not the exact outcomes themselves.

While Newtonian physics and quantum physics may seem quite different at first glance, they are actually complementary theories that can be used to describe the behavior of matter and energy in different situations. In many cases, the predictions of quantum physics agree with those of Newtonian physics, but there are also situations where quantum physics makes predictions that differ from those of classical mechanics.

The position of the image relative to the mirror v = 20cm, position of the image behind the mirror.

Since object is always placed in front of the mirror

Hence, object distance will be negative

Object distance (u) = - 100cm

Focus of a convex mirror is behind the mirror

Hence focal length will be positive

Focal length (f)= + 25cm

Find position of the image

Let the image distance = v

Using formula,

[tex]\frac{1}{v}[/tex] +[tex]\frac{1}{u}[/tex] = [tex]\frac{1}{f}[/tex]

[tex]\frac{1}{v}[/tex] = [tex]\frac{1}{f} - \frac{1}{u}[/tex]

[tex]\frac{1}{v} = \frac{1}{25} - \frac{1}{-100}[/tex]

[tex]\frac{1}{v} = \frac{1}{25} + \frac{1}{100}[/tex]

[tex]\frac{1}{v} = \frac{4 + 1}{100}[/tex]

[tex]\frac{1}{v} = \frac{5}{100}[/tex]

v = [tex]\frac{100}{5}[/tex]

v = 20cm

Since v is positive

Hence, image is 20cm behind the mirror

Nature of image is Virtual and erect.

To learn more about convex mirror

https://brainly.com/question/7512320

#SPJ4

The B in the volume formula V = BH stands for the base, which is the area of the base of the cylinder shape.

A cylinder is a three-dimensional solid shape comprising two parallel circular bases, connected by a curved surface, where the center of the circular bases overlaps each other to create a right cylinder.  The formula V = BH is a formula used to calculate the volume of a cylinder. In this formula, V stands for volumes, H represents the height of the cylinder, and B indicates the area of the base of the cylinder.

You can learn more about volume of a cylinder at

https://brainly.com/question/23935577

#SPJ4

In chemistry, +2 charge indicates that if the given atom, molecule, or compound needs to lose 2 of its electrons for becoming a cation.

In chemistry,

We often use two types of symbols, one is positive and the other is negative.

If at the top of any atom/compound/molecule + is written it means that the particular atom/molecule/compound needs to lose 2 electrons, as it has 2 excess electrons, and when the atom loses 2 of its electrons then the octet of the electrons will be formed in the outermost orbit, and the atoms become cationic in the nature.

We know, Ions are usually formed by the losing or gaining of electrons,

So, we can say that, if the atom loses any electrons then + sign will be given similarly when the atom gains any electrons then the negative sign will be given.

For more questions on Anions and Cation

https://brainly.com/question/29881975

#SPJ4

Duodenum, duodenal flexure, mesentery, ileocecal junction, Ileum, jejunum.

A section of the small intestine. It is linked to the stomach. Food that has just left the stomach is further digested in the duodenum. It absorbs water and nutrients from meals so that the body can use the vitamins, minerals, carbs, fats, and proteins. The big intestine receives food that has been broken down in the small intestine (also called the large bowel or colon). The large intestine, which is approximately five feet long, removes the majority of the water from the meal and gives it to the body. The remainder travels via the colon and is expelled from the body as feces (stool).

Learn more about Duodenum here:

https://brainly.com/question/8098134

#SPJ4

Acceleration towards rear is 11 m/s2.

Mass of dummy = 75 kg,   Force acted towards rear of the car = 825 N. Force acting on a body = Mass of body * Acceleration of body

The rate at which an item changes its velocity is known as acceleration, a vector quantity. If an object's velocity is changing, it is accelerating.

A substance is not accelerating if its velocity is not changing. The information on the right depicts an object that is speeding as it moves northward.

Therefore, Acceleration towards rear is 11 m/s2.

To learn more about acceleration, refer to the link:

https://brainly.com/question/12550364

#SPJ1

The intensity reflection coefficient (irc) is 1.

The ratio of the intensity of the reflected wave to the incident (transmitted) wave is known as the intensity reflection coefficient.

Intensity of incident (transmitted) sound wave = 50 W/cm².

As it  is totally reflected,  intensity of the reflected sound  wave = 50 W/cm².

Hence,  intensity reflection coefficient =

intensity of the reflected sound wave ÷ Intensity of incident sound wave

= 50  W/cm² /  50 W/cm².

= 1.

Learn more about reflection coefficient here:

https://brainly.com/question/28145974

#SPJ4

The resistance of the wire as shown is obtained as 106.3 * 10^4 Ohm.

We know that the term resistance has to do with the degree of the opposition that is offered to the flow of current. We should know that the resistivity is the opposite of conductivity. We can see that in this case we have to write down the formula of the resistance as;

R = ρl/A

R = resistance

ρ = Resistivity

l = length

A = Area

Then we have for the mercury;

R = 1 * (106.3 * 10^-2)/( 1 * 10^-6)

R = 106.3 * 10^4 Ohm

The wire would have a resistance of  106.3 * 10^4 Ohm.

Learn more about resistivity:https://brainly.com/question/29427458

#SPJ1

There are 3 vectors are in {a1,a2,a3}.

Since W is the set of all vectors that can be written as a linear combination, there are infinitely many members in W. k₁, k₂, and k₃ are actual integers in the formula: k₁ * a₁ + k₂* a₂ + k₃ * a₃3 .

The definition of a vector is an entity with both magnitude and direction. The movement of an object between two points is described by a vector. The directed line segment can be used to graphically represent vector math.

(a). A₁, A₂, and A₃ each contain three vectors. b = (4, 1, -4) = -4 * a1 - a2 - 2 * a3. In W, the number of vectors is unlimited.

To know more about vectors

https://brainly.com/question/13103483

#SPJ4

Rock from the Great Plains and the Rocky Mountains combined to form a single rock formation, which was later destroyed. The first allegation is accurate, but the second one should be dropped.

For more information on rocky mountains kindly visit to

brainly.com/question/13438263

#SPJ1

Planetesimals' orbits were disturbed by orbital resonance with Jupiter, which prevented them from accreting into planets.

Orbital resonance happens when the gravitational forces of celestial bodies that are periodically orbiting one another interact, and this interaction is sometimes expressed as a ratio of tiny integers.

Jupiter has the ability to influence the asteroid belt since it is so large and is located very close to the asteroid belt compared to other planets. Asteroids are literally pushed out of the orbital resonances with Jupiter at the locations where they exist, leaving empty space in their wake.

Since Daniel Kirkwood, an American astronomer, was able to foresee and characterise such occurrences in the middle of the 1800s, the region has been virtually free of asteroids. Kirkwood gaps were later used to describe this paucity of asteroids in the region of Jupiter's orbital resonances.

To know more about asteroid belt:

https://brainly.com/question/27925842

#SPJ4

i) The pressure exerted by the oil on the base of the tank is 12495 Pascal.

ii) The force exerted by the oil on the base of the tank is 44982 Newton.

The force delivered perpendicularly to an object's surface per unit area across which that force is dispersed is known as pressure.

Density of the oil: ρ = 850 kg/m³

Depth of the tank: d = 1.5 m

dimensions  of rectangular base = 2.4 m × 1.5m.

We know that: acceleration due to gravity: g = 9.8 m/s².

i) the pressure exerted by the oil on the base of the tank: P= dρg

= 1.5 m × 850 kg/m³ × 9.8 m/s²

= 12495 Pascal.

ii)  the force exerted by the oil on the base of the tank:

F = pressure × area

= 12495 Pascal ×  2.4 m × 1.5m.

= 44982 Newton.

To learn more about pressure, refer the link:

https://brainly.com/question/12971272

#SPJ1

Out of all the human-influenced climate factors examined by the IPCC, CO2 has the highest positive RF overall. Other gases are capable of trapping heat more effectively than CO2 does, molecule for molecule.

When coal, oil, natural gas, and other carbon-rich fossil fuels are burned, carbon dioxide is released into the atmosphere. Despite not being the most potent greenhouse gas, carbon dioxide.

What's so significant about CO2 is this: A greenhouse gas, that is. The atmosphere's CO2 hence helps to confine heat near to Earth. It is beneficial for Earth to retain some of the energy it receives from the Sun so that it does not entirely escape back into space.

To know more about carbon dioxide visit:-

https://brainly.com/question/21943405

#SPJ4

An ultraviolet type of photon is released whenever an electron inside a hydrogen atom transitions from the n-2 to the n-1 energy level.

An electron is a negatively charged neutron star that can be either free or bonded to an atom (not bound). An atom has three basic types of particles: protons, neutrons, and the electron that is connected to them.

The electrons are an atom's negatively charged building blocks. A negatively charged atom is created when all of an atom's electrons come together to balance off the positive charge that protons have inside the atomic nucleus. Electrons are the most abundant element in the universe.

To know more about photon

https://brainly.com/question/27984522

#SPJ4

The right response is travelling to the Himalayan Mountains to see Uncle Chrissy gravitational.

Objects with mass produce a force called gravity that affects other mass-containing objects. Our planet has a gravitational field, and objects can be affected by that field's force.

The Arctic Ocean's surface has the highest gravitational acceleration, at 9.8337 m/s2, while Mount Nevado Huascarán in Peru has the lowest, at 9.7639 m/s2.

This indicates that the Earth's gravity is 9.789 m/s2 at the equator and 9.832 m/s2 at the poles. In other words, this centripetal force causes you to weigh slightly more at the poles than you do at the equator. The size of an object has an impact on gravity, as does

To learn more about gravitational  please click on below link

https://brainly.com/question/3009841

#SPJ4

Yes i would personally get better results and be more motivated by participating in physical activities that are competitive or recreational.

My motivation would increase if I engaged in leisure physical activity. Because you must aspire for victory, competitive hobbies may come with a lot of responsibilities. Regular exercise will make you happy regardless of whether you're doing it to compete or just for the sake of it. similar to team sports like baseball, soccer, basketball, badminton, and volleyball. Because you'll be with people who share your passion for the sport but aren't competing with you, these leisure activities are a good idea.

To know more about force, visit:

https://brainly.com/question/13191643

#SPJ1

The formula for gravitational force between two objects is given as the product of gravitational constant and masses of the two objects, divided by the square of distance between the two objects.

The formula is given as:

= F = (G X M X m) / r²

where,

Force = F

Gravitational Constant = G

Mass of one object = M

Mass of another object = m

Distance = r

According to Newton's universal law of gravitation, The force of attraction between any two bodies is directly proportional to the product of their masses and is inversely proportional to the square of the distance between them.

The force of attraction on a body by earth is called gravitational force. Example : The leaves and fruits fall from a tree downwards towards the ground.

To know more about Gravitational Force:

https://brainly.com/question/1633884

#SPJ4

The removal of the periosteum causes shock, distress, tissue damage, and skin puncture. The fusing of vertebrae increases the stability, strength, and shape of the spine. But it will add stress and increase the rate of spine degradation.

The periosteum is the covering that surrounds the bones and supplies the bone with blood, nerves, and cells they require to develop and heal. The bone receives nutrients and sensations from this.

If the periosteum and the muscle are removed because of the accident, it will cause distress and severe shock. Because the nerve in this is helpful in the sensation of pain caused by tissue damage. So when this periosteum is removed, the lack of sensation will limit the regeneration of osteoblasts.

The muscle surrounding will also affect balance, and stability. Also, cause more damage or skin puncture.

Advantages:

Disadvantages:

To know more about periosteum:

https://brainly.com/question/1408966

#SPJ4

The time taken for the feather to drop to the surface, given that the gravitational acceleration is 1.6 m/s², is 1.4 s

From motion under gravity, we understood that height and time are related according to the follwing formula:

h = ½gt²

Where

Using the above formula, we can obtain the time taken for the feather to drop to the surface. Details below:

h = ½gt²

1.6 = ½ × 1.6 × t²

1.6 = 0.8 × t²

Divide both side by 0.8

t² = 1.6 / 0.8

Take the square root of both side

t = √(1.6 / 0.8)

t = 1.4 s

Thus, the time take is 1.4 s

Learn more about time:

https://brainly.com/question/14195937

#SPJ1

Their final temperature is 247.84 K.

When two physical systems are linked by a channel permeable to heat, they are said to be in thermal equilibrium if there is no net transfer of thermal energy between them. The zeroth law of thermodynamics is seen during thermal equilibrium.

Given that: container 1 initially held 78.3 kg of liquid at a temperature of 271 K, and container 2 initially held 50.6 kg of the same liquid at a temperature of 212 K.

Let the final temperature be T.

As the materials of both container 1 and 2 is same and the comes thermal equilibrium,

78.3 (271-T) = 50.6 ( T - 212 )

(50.6 + 78.3) T = 78.3*271 + 50.6*212

T = 247.84 K.

Hence, the final temperature is 247.84 K.

Learn more about thermal equilibrium here:

https://brainly.com/question/29419074

#SPJ1

λ = v/f. Wavelength, velocity, and frequency are all given in units of meters, seconds, and hertz (Hz).

Wavelength and frequency are related to wave speed via the wave speed equation (Speed = Wavelength x Frequency). This equation can be used to determine wave speed when the wavelength and frequency are known.

The frequency formula in terms of time is provided as follows: f = 1/T, where T is the duration of one cycle in seconds and f is the frequency in hertz. The formula for calculating frequency in terms of wavelength and wave speed is given as f = /, where is the wave speed and is the wavelength of the wave.

To know more about wavelength visit:-

https://brainly.com/question/12924624

#SPJ4

Answer:

are u a gìrl?????????......

Answer:

Explanation:

Thousands of avalanches occur in Canada each year. They happen in all regions of Canada, but are more frequent in the mountains of British Columbia, Yukon and Alberta. Avalanches can be triggered by wind, rain, warming temperatures, snow and earthquakes. They can also be triggered by skiers, snowmobiles, hikers, vibrations from machinery or construction.            Avalanche facts:

An avalanche occurs when a layer of snow collapses and slides downhill.

Avalanches are caused by four factors: a steep slope, snow cover, a weak layer in the snow cover and a trigger.

Roads and railway tracks may be rerouted to reduce risks.

Safe avalanches may be triggered in dangerous snow packs.

Avalanches can travel up to 90 km/h.

After one hour, only one in three victims buried in an avalanche is found alive. The most common causes of death are suffocation, wounds and hypothermia.

Given that the third sphere is located at  force x = 175 cm

Therefore, route two multiplied by the and divided by twplus one will be closed to route X. Okay, so this is how the X is expressed. This is the party, then. Now, in the party, we must locate what we have.

R = 500 cm, and x = 0.35R.

Therefore, x = 0.35 500 cm and x = 175 cm.

Therefore, the third sphere needs to be positioned 175 cm apart from the first sphere force.

The arrangement below shows the placement of two spheres, A and B. mA = 3m and mB = 8m. 8m is the mass of sphere C. Considering that A and B are separated by 500 cm,

To learn more about force  please click on below link

https://brainly.com/question/13191643

#SPJ4

In order to reduce the current flowing through the lightbulb, the team wanted to find a way to increase resistance.​ Hence, option (D) is correct.

Ohm's law is one of the most fundamental and significant principles governing electrical circuits.

Under the assumption that all physical parameters and temperatures remain constant, Ohm's law asserts that the voltage across a conductor is directly proportional to the current flowing through it.

Mathematically, V = IR

Hence, The team was trying to figure out a technique to increase resistance at constant voltage supply in order to decrease the current flowing through the lightbulb.

Learn more about Ohm's law here:

https://brainly.com/question/1247379

#SPJ1