A pitcher throws a softball toward home plate. When the ball hits the catcher’s mitt, its horizontal velocity is 32 meters/second. The softball’s velocity goes to 0 meters/second in 0. 8 seconds when caught. If the softball has a mass of 0. 2 kilograms, what’s the force of the impact? Use F = ma, where. The force of the impact is newtons.

Answers

Answer 1

The force of impact of the softball at the given conditions is 8 N.

The given parameters:

Horizontal velocity of the ball, v = 32 m/sChange in time of motion of the ball, Δt = 0.8 sMass of the ball, m = 0.2 kg

The force of impact of the softball is calculated by applying Newton's second law of motion as follows;

[tex]F = ma\\\\F = m \times \frac{\Delta v}{\Delta t} \\\\F = 0.2 \times \frac{32 - 0}{0.8 - 0} \\\\F = \frac{0.2 \times 32}{0.8} \\\\F = 8 \ N[/tex]

Thus, the force of impact of the softball at the given conditions is 8 N.

Learn more about Newton's second law of motion here: https://brainly.com/question/25307325


Related Questions

Which are examples of perfectly inelastic collisions? Check all that apply.

a baseball bouncing off a bat
bumper cars bumping off of each other
a cue ball hitting an eight ball and stopping
a plane landing on an aircraft carrier
rain sticking to a window
two train cars coupling together

Answers

A plane landing on an aircraft carrier
Rain sticking to a window
Two train cars coupling together

Answer:

D. a plane landing on an aircraft carrier

E. rain sticking to a window

F. two train cars coupling together

Explanation:

A point charge of 5. 0 Ă— 10â€""7 C moves to the right at 2. 6 Ă— 105 m/s in a magnetic field that is directed into the screen and has a field strength of 1. 8 Ă— 10â€""2 T. What is the magnitude of the magnetic force acting on the charge? 0 N 2. 3 Ă— 10â€""3 N 23 N 2. 3 Ă— 1011 N.

Answers

The magnitude of the magnetic force acting on the charge which moves to the right is 0 N.

Given to us,

the charge [tex]q[/tex] =  [tex]5\times 10^{-7}[/tex] C,

the velocity [tex]v[/tex] = [tex]2.6\times 10^5[/tex]  m/sec,

the magnetic field [tex]B[/tex] = [tex]10^{-2}[/tex] T,

angle between the direction of v and B [tex]\theta[/tex] = 0,

Magnetic force is as important as the electrostatic or Coulomb force. The magnitude of the magnetic force F on a charge q moving at a velocity of v in a magnetic field of strength B is given by

[tex]\begin{aligned}F&=qvB\ sin\Theta\\&= 5\times10^{-7}\times2.6\times10^5\times10^{-2} \times sin(0)\\&= 0\ N\\\end{aligned}[/tex]

Hence, the magnitude of the magnetic force acting on the charge which moves to the right is 0 N

For More Information visit:

https://brainly.com/question/4111572

a convex lens has a focal length of 0.5 it is combined with a second lens so combination has power 2.5 diopter which of the following could be second lens

A) concave lens focal length 2m
B) convex lens focal length 0.5m
C) concave lens 0.5m
D) convex lens 2m

Answers

Answer:

concave lens focal length 2m

A 0.24 kg mass with a speed of 0.60 m/s has a head-on collision with a 0.26 kg mass that is traveling in the opposite direction at a speed of 0.20 m/s. Assuming that the collision is perfectly inelastic, what is the final speed of the combined masses?

Answers

Answer:

  0.184 m/s

Explanation:

Momentum is conserved. If the velocity of the 0.24 kg mass is positive, then ...

  m1v1+m2v2 = m3v3

  (0.24 kg)(0.60 m/s) +(0.26 kg)(-0.20 m/s) = (0.24 +0.26 kg)(v)

  v = (0.144 -0.052 kg·m/s)/(0.50 kg) = 0.184 m/s

The speed of the combined masses is 0.184 m/s.

_____

Additional comment

The positive sign indicates the combined masses are moving in the direction of the original 0.24 kg mass.

Juliana was late to physical science class and missed the beginning of the notes, including the title. These are the notes she took. -Makes up everything -Can be solid, liquid, or gas -Is made up of atoms, or tiny particles that are the smallest unit of matter What would be the best title for her notes? Atoms Matter Mass Weight.

Answers

The correct option to the question is Matter.

Matter makes up everything. matter can be solid, liquid, or gas. matter is made up of atoms, or tiny particles that are the smallest unit of matter.

Moreover, Matter can be described as,

Matter is anything that has occupies space (has mass and volume).

For more information visit:

https://brainly.com/question/13280491

Answer:

Matter

Explanation:

I took the test Edge 2022

PLEASE HELP I WILL MARK BRAINLIST!!

The diagram shows a swinging pendulum. Which best explains what happens to the motion of the pendulum due to the law of conservation of energy?

The pendulum will slow down and eventually stop moving as the mechanical energy transforms to thermal energy.

The pendulum will slow down and eventually stop moving as the mechanical energy disappears.

The pendulum will continue moving at the same speed because mechanical energy is created as the pendulum moves.

The pendulum will slow down but will not stop moving because some of the mechanical energy is destroyed.​

Answers


The mechanical energy transforms to thermal energy as the pendulum slows and eventually stops moving.

Hope this helps!
Brainliest is much appreciated!

The pendulum bob slow down and eventually stop as it loses it energy due to friction or air resistance. All its kinetic energy has been transformed to potential energy. None of the options is correct

OSCILLATORY MOTION

The to and fro movement of an object or particle is known as oscillatory motion. Such motion repeats itself. Examples are;

Pendulum boba diving boardthe strings of a plucked guitarthe prongs of a tuning fork struck with a hard objectthe vertical movement of a disturbed mass on a spiral spring.

The given diagram shows a swinging pendulum. And the option which best explains what happens to the motion of the pendulum due to the law of conservation of energy is

The pendulum will slow down and eventually stop moving when it loses energy because of friction or air resistance as the kinetic energy transforms to potential energy

The mechanical energy involve are potential and kinetic energy. Both energies reduce as they gradually lost some of their energies due to air friction between the bob and the air. Some of the lost energies may be transformed to thermal energy.

The pendulum bob slow down and eventually stop because it loses its mechanical energy due to air resistance or friction.

Therefore, the option A which state that "The pendulum will slow down and eventually stop moving as the mechanical energy transforms to thermal energy" can be considered. But none of the option best explain what happens to the motion of the pendulum.

Learn more about Oscillatory Motion here; https://brainly.com/question/17315536

can someone explain why is the answer 3.1?​

Answers

i dont know  Im sorry but why Im messaging is because when more people respond it usually is the first to pop up so someone else will see this and be able to help you            Explanation:

Construct an explanation for the fact that we don’t see the same amount of energy coming out at the end of these transformations as we did at the beginning. *

Answers

Answer:

When energy is transformed from one form to another, or moved from one place to another, or from one system to another there is energy loss.

Explanation:

Hope this helps! :)

( the answer only for points will be reported ) A crane lifts a load of 36000N to a height of 50 metre in 1 minute . What is the power of the crane ?​

Answers

Answer:

- 30 kW

Explanation:

IDEA:

Power of an object that does work(source) is given by:

[tex] \boxed{ \mathsf{power = \frac{work \: done}{time} }}[/tex]

where work done is mostly shown as the Force applied on an object to Displace it through some distance in the same direction as the Force.

[tex] \boxed{ \mathsf{ work = force \times displacement}}[/tex]

___________________

INFORMATION:

In the question,

The source of power is the crane, while the object is a load of 36000N.

Note, what's given is the force, not the mass. Since, the SI unit of mass is kg and that of Force is Newton(N).

[The weight of the load is represented in Newton, since weight of an object is the amount of Force with which the Earth attracts that object]

I) work done

So,

Force = 36000NDisplacement = 50 m

=> Work = 36000 × 50

= 1,800,000 J

(The SI unit of work is Joules(J)).

___________________

II) power

After getting the amount of work done, now we have to place it in the formula for power.

That is:

[tex] \boxed{ \mathsf{power = \frac{work \: done}{time} }}[/tex]

Note, During calculations, all quantities must be in their SI units.

SI unit for time is Seconds (s)

But the time we have is in minutes.

___________________

Converting time from minutes to Seconds:

1 minute = 60 Seconds.

Hence,

time = 60 s

[tex] \implies \mathsf{power = \frac{1800000}{60} } \: [/tex]

=> power = 30,000 W

(SI unit of power is Watts(W))

To write four zeroes with a 3 and W is a lot of effort. So, we can look for simple expressions like kilowatts(kW) that can express bigger quantities in lesser terms.

1000 W = 1 kW

•°• 30,000 W = 30 kW.

___________________

Direction and sign:

The crane displaces the load in an upward direction (from the term "lifts")

But, the Force is acting downwards, as the weight of the body is always towards the Earth.

Since, the directions of Force and displacement are opposite, a minus takes its place in front of both Work and power.

___________________

Therefore, the final answer will be:

Power of the crane = - 30 kW

me (5) A taxi is travelling at 15. m/s. Its driver accelerates with acceleration 3 m/s for 4 s. What is its new velocity? A car accelerates from 20 m/s to 30 m/s in 10 (a) Calculate the car's acceleration using v=utat. (b) Draw a velocity-time graph to show the car's motion. Find the distance it travels by calculating the area under the graph. (c) Check your answer by using the equation s = ut + hat Grade 9​

Answers

Answer:

5)

Solution

initial velocity = 15 m/s

acceleration = 3m/s^2

time = 4 s

final velocity = 15+3×4

=15+12

=27m/s

A car accelerates from 20m/s to 30m/s in 10 second

T9 be honest I think some part of the second question is missing

Which would ba another example of newtons first law?

Answers

For example, a book resting on a table applies a downward force equal to its weight on the table. According to the third law, the table applies an equal and opposite force to the book.


Which statement accurately describes how the acceleration of an object in free fall changes?
O A. It accelerates downward at a constant rate.
O
B. It accelerates downward at an increasing rate.
C. It accelerates downward at an irregular rate.
D. It accelerates downward at a decreasing rate.

Answers

Answer: A

Explanation: An object in free fall only is affected by gravity, so the acceleration is 9.8 m/s²

A balance of forces is demonstrated by an object which is slowing to a stop true or false

Answers

Answer:

its true since i already did this last year, if i am wrong i apologize

Explanation:

I need it in the next hour or so!

A sports car with a mass of 650 kg is accelerating at +3 m/s2. The force of friction is 200 N, the forward force from the engine is 3100 N. What must the force of air resistance on the car be? - Show your work - Include a unit with your answer​

Answers

The car is accelerating at 3 m/s² in the positive direction (to the right). By Newton's second law, the net force on the car in this direction is

∑ F = F[a] - F[f] - F[air] = ma

3100 N - 200 N - F[air] = (650 kg) (3 m/s²)

Solve for F[air] :

F[air] = 3100 N - 200 N - (650 kg) (3 m/s²)

F[air] = 3100 N - 200 N - 1950 N

F[air] = 950 N

Given that 1 pound is equal to 4.45 newton’s what is the weight of a 500N child in pounds?

Answers

Answer:

112.36 pounds

Explanation:

Since 1 pound = 4.45 Newtons, a 500N child in pounds = 500÷4.45 = 112.36 pounds (approximately).

Forces are needed to make a car do which of these?

slow down

speed up

stay on the ground

all of the above

Answers

all of the above.

if your car is on a steep hill it needs force to stop moving and to speed up

Object 1 has a mass of 7.0kg and a initial velocity of 17.0 m/s. Object 2 has a mass of 8.0kg and a initial velocity of -14.0 m/s. What are the final velocitys of each object. Please show work

Answers

[tex]\\ \sf\longmapsto m1v1+m2v2=(m1+m2)v3[/tex]

[tex]\\ \sf\longmapsto 7(17)+8(-14)=(7+8)v3[/tex]

[tex]\\ \sf\longmapsto 119-112=15v3[/tex]

[tex]\\ \sf\longmapsto 15v3=7[/tex]

[tex]\\ \sf\longmapsto v3=7/15[/tex]

[tex]\\ \sf\longmapsto v3=2.1m/s[/tex]

A truck moves 60 kilometers east from point A to point B. At point B, It turns back west and stops 15 kllometers away from point A. What are the
total distance and total displacement of the truck?

Answers

Answer:

a).  The truck's distance covered for the trip is

                      (60) + (60 - 15)  =  105 kilometers .

b).  Its displacement for the whole trip is the distance

and direction from the start-point to the end-point.

                         15 kilometers east .

Explanation:

a bullet is fired out of a gun up at an angle with the horizontal. if its initial horizontal velocity is 10m/s what is the most likely horizontal velocity after two seconds

Answers

Hi there!

[tex]\large\boxed{10 m/s}}[/tex]

When a projectile is launched, the HORIZONTAL component remains constant.

The force of gravity only changes the vertical component of the velocity.

As the two components are completely independent of one another, the horizontal component is UNCHANGED.

Plz help!

A person walks the path shown
below. The total trip consists of
four straight-line paths. At the end of the walk, what is the person's
resultant displacement measured from the starting point?

Answers

The analytical method for the sum of vectors allows to find the result for the sum of the vectors is:

The resulting vector has a modulus of R = 239.99 m and an angle of θ= 212.8º

The displacement is a vector quantity, therefore vector algebra must be used to perform the addition of vectors, in general there are two methods:

Graphic. In this case, the origin of a vector is placed at the tip of the previous one and the resulting vector goes from the origin of the first vector to the tip of the last, this method is not very precise. Analytical. In this method the vectors are decomposed into a coordinate system, the sum of the components is performed and the resulting vector is built, this method is very expensive.

Indicate in  the graph a Cartesian coordinate system, let alone the West - East axis coincide with the x axis. Let's use trigonometry to decompose the vectors.

Vector A.

         Aₓ = 100.0 m  

Vector B.

         B_y = -300.0 m  

The negative sign indicates that it goes in the negative direction of the y-axis

Vector C.

We use trigonometry.

The angle measured from the positive side of the x-axis counterclockwise is

        θ = 180 + 30 = 210

       

        sin 210 = [tex]\frac{C_y}{C}[/tex]

        cos 210 = [tex]\frac{C_x}{C}[/tex]

        C_y = C sin 210

        Cₓ = C cos 210

         C_y = 150.0 sin 210 = -75.0 m

         Cₓ = 150.0 cos 210 = -129.9 m

Vector D.

The angle from the positive side of the x-axis counterclockwise.

        θ = 180-60 = 120º

       sin 120 = [tex]\frac{D_y}{D}[/tex]  

       cos 120 = [tex]\frac{D_x}{D}[/tex]  

       D_y = D sin 120

       Dₓ = D cos 120

       D_y = 200.0 sin 120 = 173.2 m

       Dₓ = 200.0 cos 120 = -100.0 m

we add the component with algebraic sum.

       x = Aₓ + Cₓ + Dₓ

       y = B_y + C_y + D_y

       x = 100 - 129.9 -100 = -129.9 m

       y = -300 - 75.0 + 173.2 = -201.8 m

We construct the resulting vector.

We use the Pythagorean theorem for the Modulus.

       [tex]R+ \sqrt{x^2 +y^2}[/tex]  

       R = [tex]\sqrt{129.9^2 + 201.8^2 }[/tex]  

       R = 239.99 m

We use trigonometry for the angle.

      tan  θ = [tex]\frac{y}{x}[/tex]

       θ = [tex]tan^{-1} \frac{y}{x}[/tex]  

       θ = [tex]tan^{-1} \frac{201.8}{129.9}[/tex]tan-1 (201.8 / 129.9)

       θ = 57.2º

Since the two coordinates are negative, this angle is in the third quadrant; to measure it from the positive side of the x-axis.

          θ = 270 - θ'

          θ = 270 - 57.2

          θ = 212.8º

In conclusion using the analytical method for the sum of vectors we can find the result for the sum of the vectors is:

The resulting vector has a modulus of R = 239.99 m and an angle of  θ= 212.8º

Learn more about vector addition here:  brainly.com/question/24855749

why we use light-years in space verses other units of distance?

Answers

Answer:

The light year is used to measure distances in space because the distances are so big that a large unit of distance is required.

the purpose of many scientific investigations is to test a {n}

Answers

Hypothesis , I believe the answer is hypothesis

Answer:

Scientific investigation is a quest to find the answer to a question using the scientific method.

Explanation:

the scientific method is a systematic process that involves using measurable observations to formulate, test or modify a hypothesis.

which research model refers to the study of an individual group or community over a predetermined period

Answers

longitudinal modelrefers to the study of a particular individual , group , society , or community over a predetermined period , which may be a specified number of weeks , months , or years

Developing Psychological Theories: Mastery Test

-

Hope this helps :)

-

what is the horse power of an electric motor which can do by 1250 joule of work in 5 seconds​

Answers

1250 J in 5 sec= 250 Joule(s) per second (1250/5 0

250 Joules per second = 250 Watts ( 1J/s = 1 Watt per definition)

250 Watts output = 250/0.65 efficiency = 384 Watts input

1 Horsepower = 732 Watts

Motors 1 Horsepower and under are made in certain step sizes like

3/4 , 1/2 , 1/3, 1/4, 1/16 1/20 of a Horsepower.

3/4 Horsepower is 549 Watts

1/2 Horsepower is 366 Watts

so you need to 3/4 horsepower motor to achieve 1250 J of work in 5 seconds.

Block A has a mass of 2kg and a speed of 50 m/s along the positive x axis.

Block B has a mass of 4 kg and a speed of 25 m/s along the negative x axis.



The two blocks collide head-on in a perfectly elastic collision.

Determine the velocity of each mass after the collision.

Answers

Momentum is conserved, so

(2 kg) (50 m/s) + (4 kg) (-25 m/s) = (2 kg) v₁' + (4 kg) v₂'

where v₁' and v₂' are the velocities of the two blocks after the collision. Simplifying this gives

100 kg•m/s - 100 kg•m/s = (2 kg) v₁' + (4 kg) v₂'

0 = (2 kg) v₁' + (4 kg) v₂'

v₁' = -2v₂'

Energy is also conserved, so

1/2 (2 kg) (50 m/s)² + 1/2 (4 kg) (-25 m/s)² = 1/2 (2 kg) (v₁')² + 1/2 (4 kg) (v₂')²

Simplifying yields

2500 J + 1250 J = (1 kg) (v₁')² + (2 kg) (v₂')²

3750 J = (1 kg) (v₁')² + (2 kg) (v₂')²

Substitute v₁' = -2v₂' and solve for v₂' :

3750 J = (1 kg) (-2v₂')² + (2 kg) (v₂')²

3750 J = (6 kg) (v₂')²

(v₂')² = 625 J/kg = 625 m²/s²

v₂' = 25 m/s

Then the first block has final velocity

v₁' = -2 (25 m/s)

v₁' = -50 m/s

A roller coaster
produces acceleration due
to changes in both speed
and direction. Applying
Concepts Describe the
acceleration occuring at this
instant on the
rollercoaster ride.

Answers

Answer:

the answer is the rollar coster

Explanation:

because the rollar coster is

How many cm3 are there in 1 dm3?

Answers

The answer is in the picture.

how does cells and tissues work together with the brain to do its job

Answers

Cells are grouped together to carry out specific functions. A group of cells that work together form a tissue. Your body has four main types of tissues, as do the bodies of other animals. These tissues make up all structures and contents of your body.

Explain Body Mechanics.
PLUS BRAINLY! and 50 Points

Answers

Answer Body mechanics is a term used to describe the ways we move as we go about our daily lives. It includes how we hold our bodies when we sit, stand, lift, carry, bend, and sleep. ... Good body mechanics means using the body's strength to the best mechanical advantage to do a task efficiently and without injury.

Explanation:

When dribbling a ball, the ______________ should control the direction and downward motion of the ball.

Answers

Answer:

gravity

Explanation:

keeps the ball down on the surface

When dribbling a ball, the gravity should control the direction and downward motion of the ball.

What is projectile motion?

When a particle is hurled obliquely near the surface of the earth, it travels along a curved path while accelerating continuously in the direction of the planet's centre (we assume the particle stays close to the surface of the globe). Such a particle's motion is known as projectile motion, and its route is referred to as a projectile.

Two distinct rectilinear motions occur simultaneously in a projectile motion:

Uniform velocity along the x-axis is what causes the particle to move horizontally (ahead).Uniform acceleration along the y-axis is what causes the particle to move vertically (downwards).

When a ball is sent into the air at a certain speed, the only force acting on it is the acceleration caused by gravity (g).

Learn more about projectile motion here:

https://brainly.com/question/11049671

#SPJ2

Other Questions
3) Match the outline for the Federalist Papers written in Federalist No. 1. (in order as they appear) the additional security which its adoption will afford to the preservation of that species of government, to liberty, and to property the insufficiency of the present confederation to preserve that Union its analogy to your own state constitution the necessity of a government at least equally energetic with the one proposed, to the attainment of this object the utility of the Union to your political prosperity the conformity of the proposed Constitution to the true principles of republican government President theodore roosevelt speak softly and carry a big stick'' foreign policy was based on brainly. A 6am one morning the temperature was -14 degrees by noon it rose 8 degrees and then rose another 2 degrees by 3pm. By 6pm the temperature had dropped 5 degrees. What was the temperature at 6pm why are electric switches and boards are made up of plastic Should traditional grammar be continued to be taught in schools? Please tell me the answer how did the management of national money influence the french revolution What side of the Nile would you want to live or be buried after dead? Why? Could a single person or animal be a point source pollution what does what they gathered refer to? Choose the phrase that completes the sentence Depth perception is also known as ___________ vision. -3y-7x When x=6, y=3 Write the phrase "one more than the product of six and nine" as a mathematical expression. some help, I need some answers NEED HELP QUICK I WILL GIVE BRAINLIST Determine if the two triangle are congruent. If they are state how you know Can someone tell me an ice storm is?BUT IN YOUR OWN WORDS!!no links please What is -2-4 in mathematics 30 POINTS John opens a savings account and decides to deposit $10 each month. Let x represent the number ofmonths that he has been saving, and y, represent the total amount of money saved.7. What is the algebraic equation for John's saving plan?8. How much money will John have saved in 14 months? In 6 months? Show your work andexplain.9. In how many months will John have saved $100? $175? Show your work and explain.10. What is the rate of change?11. How does knowing the rate of change help you in answering questions in this problem?12. Use your equation to complete the table representing John's savings:# of Months Saving Account Balance ($)01234 A 33.4L volume of methane gas is heated from 22C to 66C at constant pressure. What is the final volume of the gas?