A program is used to assign processes to each of the processors. Which of the following describes how the program should assign the four processes to optimize execution time?
Answers
The program should assign the four processes to optimize execution time is processes W and Z should be assigned to one processor, and processes X and Y should be assigned to the other processor.
What is optimize execution time?Optimize execution time is the time that required for processors to workload the process in closest or equal as possible from different workload process, so the processor doesn't finish too early or must be wait for other processor to finish.
So, to get the closest result for optimize execution time it can be done by pairing the longest execution time by the shortest execution time. Then, we get W and Z for one processor and X and Y for other processor.
You question is incomplete, but most probably your full question was
A computer has two processors that are able to run in parallel. The table below indicates the amount of time it takes either processor to execute four different processes. Assume that none of the processes is dependent on any of the other processes.
(image attached)
A program is used to assign processes to each of the processors. Which of the following describes how the program should assign the four processes to optimize execution time?
A)Processes W and X should be assigned to one processor, and processes Y and Z should be assigned to the other processor.
B)Processes W and Y should be assigned to one processor, and processes X and Z should be assigned to the other processor.
C)Processes W and Z should be assigned to one processor, and processes X and Y should be assigned to the other processor.
D)Process Z should be assigned to one processor, and processes W, X, and Y should be assigned to the other processor.
Learn more about optimize execution time here:
brainly.com/question/30063993
#SPJ4
Related Questions
The priority code point field in a frame consists of how many bits?
Answers
The priority code point field in a frame consists of 3 bits. The smallest unit of data on a computer is a bit, which is a binary digit. There are just two values that a bit can store: 0 or 1
In order to transport one of 64 distinct differentiated services field code point (DSCP) values, the Differentiated Services (Diffserv) architecture mandates that the DS field in IPv4 and IPv6 packet headers be used.
For the purposes of codepoint assignment and management, the codepoint space is divided into three pools: a pool of 32 codepoints (Pool 1) that will be assigned by Standards Action as defined in [RFC8126], a pool of 16 codepoints (Pool 2) that will be reserved for experimental or local use (EXP/LU), and a pool of 16 codepoints (Pool 3), initially available for experimental or local use, but which should be used preferentially for Standardized assignments now use codepoints from Pool 3
Learn more about Code here:
https://brainly.com/question/17293834
#SPJ4
Which company specializes in working behind the scenes to meet advertiser’s cpm guarantees by tagging users to create consumer profiles, but is not an ad network?
Answers
Browser, software that enables a computer user to search for and see information on the Internet.
Web browsers interpret HTML elements in downloaded documents and format the displayed data in accordance with a set of style rules. A website is a collection of publicly accessible, interconnected Web pages that use the same domain name. Individuals, groups, businesses, and organizations can construct and maintain websites for a variety of objectives. OTS is a possible exposure of an advertising message to one audience member. Also known as a marketing impression. engaging with consumers. Any advertiser who invests in digital interactivity should be prepared to maintain contact with their target audiences.
Learn more about software here-
https://brainly.com/question/29946531
#SPJ4
Use nested for-loops to have the turtle draw a snowflake of polygons. Use the variable turnamount to turn after each shape and the variable n for the sides of the polygon
Answers
An interlocking loop is referred to as nested loop . These are frequently utilized while working in two dimensions, such as when printing stars in rows and columns.
How do two for loops that are nested work?An inner loop encloses the body of an outer loop, creating a nested loop. In order for this to operate, the inner loop must be triggered by the outer loop's initial pass in order to begin working. The inner loop is then reactivated during the second transit of the outer loop.
The for loop may be nested, right?For loops that are nested are placed inside of one another. With each outer loop iteration, the inner loop is repeated.
To know more about nested for-loops visit :-
https://brainly.com/question/13971698
#SPJ4
What 3 things make a reliable source?
Answers
Answer: (read explanation)
Explanation:
There are several characteristics that can make a source reliable. These characteristics include:
Authority: A reliable source is typically written or produced by someone who is an expert in the field or topic that the source covers. This expert may be a researcher, scholar, or other qualified individual who has knowledge and experience in the subject matter.
Accuracy: A reliable source provides accurate information that is supported by evidence and can be verified through other sources. The information in a reliable source is factual, well-researched, and free from errors or bias.
Objectivity: A reliable source presents information in an unbiased manner, without trying to persuade the reader to adopt a particular point of view. The information in a reliable source is presented objectively, allowing the reader to form their own opinion based on the evidence provided.
Overall, a reliable source is one that is written or produced by an expert, provides accurate information, and presents this information in an objective manner.
why would you use the check accessibility feature.
Answers
The reason I use the check accessibility feature is because it checks my file against a set of guidelines that pinpoint potential problems for those with disabilities.
What is the main purpose of the accessibility checker?Accessibility features are made to make it easier for persons with disabilities to utilize technology. A speech-recognition feature, for instance, enables users with limited movement to control the computer with their voice. A text-to-speech tool, on the other hand, may read text aloud for persons with limited vision.
Therefore, one can say that your file is checked by the accessibility checker against a list of guidelines that pinpoint any potential problems for those with disabilities. The Accessibility Checker categorizes every issue as either an error, warning, or tip depending on how serious it is.
Learn more about accessibility feature from
https://brainly.com/question/14350549
#SPJ1
g consider the following delays for computation in each of the pipeline stages in a mips processor: given this, what is the latency of a load instruction in a five stage pipelined implementation of this mips processor?
Answers
When a pipeline is used, the cycle time is reduced to the longest stage's length plus the register delay. Due to the fact that each stage requires one cycle and that one instruction must pass through each one, latency is defined as CT*N, where N is the number of stages.
What is latency in pipeline?The phrase "instruction latency" should be introduced before we wrap up our study of pipeline delays. You'll come across it several times in the remaining sections of this essay. The number of clock cycles needed for an instruction to complete its pipeline traversal is known as its latency. All instructions for a processor with a single clock cycle have the same delay. As opposed to this, all instructions in the straightforward four-stage pipeline that has been presented so far have a four-cycle latency. Similarly, instructions on an eight-stage pipeline have a latency of eight cycles, those on a twelve-stage pipeline of twelve cycles, and so forth.The number of pipeline steps is not always a set number in real-world CPUs, and neither is the instruction delay.Each extra cycle that instructions spend waiting in a pipeline stage increases their delay by one cycle since instructions may become stuck in one or more pipeline stages for numerous cycles. As a result, the instruction latencies listed above, such as four cycles for a pipeline with four stages, eight cycles for a pipeline with eight states, etc., are the minimum instruction latencies. Depending on whether or not an instruction pauses in one or more stages, actual instruction latencies in pipelines of any length may exceed the depth of the pipeline.To Learn more About pipeline refer to:
https://brainly.com/question/29492482
#SPJ4
How do I get to easy settings in Windows 10?
Answers
1. Payroll Program with Input Validation Design a payroll program that prompts the user to enter an employee's hourly pay rate and the number of hours worked. Validate the user's input so that only pay rates in the range of $7.50 through $18.25 and hours in the range of 0 through 40 are accepted. The program should display the employee's gross pay.
Answers
The payroll program that prompts the user to enter an employee's hourly pay rate and the number of hours worked is made with the help of Do While loop.
What is Program?A sequence or set of instructions written in a programming language for a computer to follow is called a computer program. Software includes documentation and other intangible components in addition to computer programs. Source code is the human-readable version of a computer program. Because computers can only execute their own native machine instructions, source code must be executed by another computer program.
Given to make a payroll program,
Program is made with Do While loop,
A condition and a process symbol make up the do while construct. First, the block's code is executed. After that, the situation is looked at. The block's code is executed once more if the condition is met. This continues until the condition is true.
The program code is,
Do While payRate > 7.5 AND payRate < 18.25
Display "Enter hourly pay rate: "
Input payRate
End While
Do While hoursWorked > 0 AND hoursWorked < 40
Display "Enter number of hours worked: "
Input hoursWorked
End While
grossPay = payRate * hoursWorked
Display "The employee gross pay is " + grossPay
Hence code is as follows.
Learn more about program;
https://brainly.com/question/11023419
#SPJ4
a system uses simple/pure paging and tlb each memory access requires 100ns tlb access requires 5ns tlb hit rate is 90%. work out the actual speedup because of the tlb? speedup
Answers
Each process in the operating system will have its own page table, which will contain Page Table Entry (Memory Management Technique: Paging) (PTE).
What is Translation Lookaside Buffer (TLB) in Paging?The frame number (the address in main memory to which we want to refer) and a few other essential bits (such as the valid/invalid bit, dirty bit, protection bit, etc.) will be included in this PTE. This page table entry (PTE) will indicate where the actual page is located in main memory.The issue now is where to put the page table such that overall access time (or reference time) will be less.Fast main memory content access using a CPU-generated address (i.e., a logical or virtual address) presented a challenge at first. Since registers are high-speed memory, some people at first considered utilizing them to store page tables since access times would be shorter.The concept employed here is to store the page table entries in registers, so that when a request is created from the CPU (virtual address), it will be matched to the correct page number of the page table, which will then reveal where in the main memory the corresponding page is located.Everything appears to be in order, but the issue is that the register size is small (in practice, it can only hold a maximum of 0.5k to 1k page table entries) and the process size may be large, so the required page table will also likely be large (let's say this page table contains 1M entries). As a result, the registers might not be able to hold all of the PTEs of the page table. Therefore, this strategy is not workable.The Complete Question is Page Table Entry.
To Learn more About Page Table Entry refer to:
https://brainly.com/question/15409133
#SPJ4
which of the following statements best summarizes the author’s predictions for how humans will meet the future nutritional needs of a growing population using current agricultural technology?
Answers
The best summarizes the author’s predictions for how humans will meet the future nutritional needs of a growing population using current agricultural technology is humans have maximized the crop yield with improving technology and the implementation of modern genetic techniques to further increase crop productivity and resilience in order to meet the demand.
What is agricultural technology?Аgriculturаl technology or аgrotechnology is the use of technology in аgriculture, horticulture, аnd аquаculture with the аim of improving yield, efficiency, аnd profitаbility. Аgriculturаl technology cаn be products, services or аpplicаtions derived from аgriculture thаt improve vаrious input/output processes.
To аddress these forces poised to further roil the industry, аgriculture must embrаce а digitаl trаnsformаtion enаbled by connectivity. These new technologies cаn upgrаde decision mаking, аllowing better risk аnd vаriаbility mаnаgement to optimize yields аnd improve economics.
Your question is incomplete, but most probably your full question was
Which of the following statements best summarizes the author's predictions for how humans will meet the future nutritional needs of a growing population using current agricultural technology?
A) The effects of global climate change will decrease as farmers employ advanced technological methods to agriculture.
B) Less-developed countries must change from a meat-based protein diet to a more grain-based diet. This will allow the global population to continue to meet the agricultural demands of a growing population.
C) Humans have maximized the crop yield with improving technology and the implementation of modern genetic techniques to further increase crop productivity and resilience in order to meet the demand.
D) The only way to meet the agricultural demand of a growing world population is to convert more grassland and forests into working agricultural land. Genetically modified foods are no longer nutritious, and the nutrients in the forest and grassland soil will increase yield and nutrition.
Thus, the correct answer is C.
For more information about agricultural technology refer to the link:
https://brainly.com/question/20450639
#SPJ4
the number of elements shifted in insertion sort depends on where it will be inserted. group of answer choices true false
Answers
The straightforward sorting technique known as insertion sort compares each item in turn to create the final sorted array (or list).
What is insertion sort?Comparing it to more sophisticated algorithms like quicksort, heapsort, or merge sort on large lists, it performs significantly worse. But there are a few benefits to using insertion sort:Easy to implement A five-line optimized version of Jon Bentley's three-line C/C++ version is shown. Effective for (quite small) data sets, similar to other quadratic (i.e., O(n2)) sorting algorithmsIn comparison to the majority of other basic quadratic algorithms, such as selection sort and bubble sort, it is more effective in practice.Adaptive, i.e. effective for data sets that have previously been considerably sorted: When each input element is no more than k positions from its sorted location, the time complexity is O(kn), meaning that the order of elements with equal keys remains stable.Online, i.e., may sort a list as it is received In-place, i.e., only needs a constant amount O(1) of additional memory spaceMost individuals employ an approach resembling insertion sort when manually sorting cards in a bridge hand.To Learn more About insertion sort refer to:
https://brainly.com/question/23161056
#SPJ4
What are the two types of process automation?
Answers
The two types of process automation are
1. Robotic Process Automation (RPA)
2. Business Process Automation (BPA)
What are the disadvantages of automation?1. High Initial Costs: Automation requires a significant financial investment, which may be difficult for some businesses to afford.
2. Job Losses: Automation can reduce the number of jobs available in an industry, as machines replace human labor.
3. Complexity: Automation can be difficult and time consuming to set up and maintain.
4. High Maintenance Costs: Automation requires frequent maintenance and repairs, which can be costly.
5. Human Errors: Automation can be prone to errors due to incorrect programming or faulty hardware.
6. Limited Flexibility: Automation is limited in its ability to adapt to changing conditions.
7. Security Risks: Automation may pose security risks if not properly managed.
To learn more about automation refer to:
https://brainly.in/question/53276335
#SPJ4
What are advantages of lookup fields? check all that apply. Shorter reports simpler queries easier data entry acceptable values fewer misspellings.
Answers
Easier data entry, acceptable values, fewer misspellings are advantages of lookup fields.
What is lookup fields?
A field in a table called a "lookup field" is one whose value is obtained from another table or query. The Lookup Wizard should always be used to create a lookup field.
The Lookup Wizard streamlines the procedure and automatically sets the relevant field characteristics and table associations.
What is lookup field how is it used?
Two records can be linked together in a relationship using lookup fields. An account lookup field, for instance, is present in a contact record and links the contact to its account.
Simplest vertical and horizontal lookups can be done using Excel's LOOKUP function. Excel offers LOOKUP in both vector and array formats.
Learn more about lookup field
brainly.com/question/16220655
#SPJ4
give an example show how a letter in the english alphabet is stored using ASCII
Answers
The letters in the English alphabet are stored using ASCII by the binary codes. The letter 'a' has the binary number 0110 0001.
What is ASCII?American Standard Code for Information Interchange, or simply ASCII, is a common data-encoding system for electronic computer communication.
Letters, numbers, punctuation marks, and other computer characters are given conventional numeric values by ASCII. The following are possible representations for ASCII characters: as three-digit octal (base 8) numbers.
Therefore, binary codes are used to store the English alphabet's letters using ASCII. The binary value of the letter "a" is 0110 00.
To learn more about ASCII, refer to the link:
https://brainly.com/question/17147612
#SPJ1
What are the 3 types of training?
Answers
The 3 types of training is On the job training , Off-the-job training , E-learning.
What are the 3 types of training?On-the-job training: This kind of training takes place when a less inexperienced coworker, supervisor, or manager trains an employee to carry out a particular job task or role within an organization. It typically takes place at work and may include a demonstration, some practice, and instructor comments. Since it enables employees to learn in the setting where they will be carrying out the responsibilities, on-the-job training is sometimes seen as the most effective.Off-the-job training: Off-the-job training is a type of instruction that is conducted outside of the typical workplace setting. This kind of training could take place in a different area, structure, or even location.It is frequently used to teach staff members skills that are either too complicated to be taught on the job or have no bearing on the particular task they are performing.E-learning : A website or an online learning platform can be used for e-learning, which is a type of instruction that takes place online. It can be used to teach employees a variety of skills and expertise, such as customer service, product knowledge, and computer skills. This kind of training is frequently self-paced, allowing participants to take their time and learn at their own pace.To learn more about the 3 types of training refer to:
https://brainly.com/question/29829957
#SPJ4
What is a programmable electronic device that accepts data input performs processing operations on that data and outputs and stores the results?
Answers
A computer is a device that can be configured to take in data (input), turn it into information that is useful (output), and then store the information away (in a secondary storage device) for safekeeping or future use.
What is computer ?"Radio, movies, and television mixed," a six-year-old said of a computer. The phrase "a television set you can talk to" was used by a ten-year-old to describe a computer. The ten-year-definition old's is more accurate, but he or she still does not see the computer as a tool with the ability to alter things.Although hardware does the processing, software controls how input is converted to output.A computer system needs input, processing, output, and storage in order to operate. These are the four main data handling components. Following is a description of how the hardware in charge of these four regions works:Data is accepted via input devices in a format that a computer can understand, and after being sent there, it is processed.The electronic circuitry that transforms input data into the information humans seek is found in the processor, also referred to more technically as the central processing unit (CPU). Computer instructions contained in the program are carried out by the central processing unit.The processed data-information is presented to users in a usable way through output devices.Typically, storage refers to backup storage. Diskettes and other items that can store data and applications outside of the computer are examples of secondary storage. The computer's memory, which will be seen to be only briefly able to store data and programs, is supplemented by these devices.To Learn more About computer refer to:
https://brainly.com/question/21474169
#SPJ4
If the last line in a file is not terminated with \n, the readline method will return the line without \n.
a. True
b. False
Answers
True, the readline function will return the line without a \n if the last line of a file doesn't end with one.
Linux comes with a built-in text editing tool called Sed. "Stream editor" is what the name "sed" means. Despite its name, sed isn't a standalone text editor. Instead, it accepts text as input, modifies it in different ways as directed, and then outputs the result.
Sed's entire name provides us a clue as to how it operates. The text input is treated as a "stream" by Sed. Anywhere, including a text file or standard output, can provide the text (STDOUT). Sed processes the input line by line after taking it.
We'll use the sed "d" command to remove a line. Keep in mind that you must specify which line to remove. If not, sed will remove every line.
Sed may remove a selection of lines.
Learn more about File here:
https://brainly.com/question/14338673
#SPJ4
HELP ME!
How do you change the file type of an downloaded image?
Answers
Answer:
To change the file type of an image, you can use an image editing software or a file conversion tool. Here's a step-by-step guide:
Open the image file using an image editing software such as Adobe Photoshop, GIMP, or Paint.
Go to the "File" menu and select "Save As."
In the "Save As" dialog box, select the desired file format from the "Save as type" drop-down menu.
Choose a name and location for the file, and then click "Save."
Alternatively, you can use a file conversion tool to change the file type. These tools allow you to convert the image file to a different format without requiring any special software. Some popular file conversion tools include Online-Convert, Zamzar, and FileZigZag. To use a file conversion tool, follow these steps:
Go to the website of the file conversion tool you want to use.
Select the option to convert an image file.
Choose the image file you want to convert by clicking the "Choose Files" button or dragging and dropping the file into the designated area.
Select the desired file format from the drop-down menu.
Click the "Convert" button to start the conversion process.
Once the conversion is complete, the tool will typically allow you to download the converted file. Save the file to your computer and open it to verify that the conversion was successful.
Explanation:
Answer:
Here is an example of how you might do this using Photoshop:
Open the image in Photoshop.Go to the "File" menu and select "Save As."In the "Save As" window, choose the desired file format from the "Format" dropdown menu.Enter a name for the new file in the "File Name" field.Choose a location to save the file in the "Save In" field.Click the "Save" button to save the image in the new file format.a music production company needs to save music at the highest quality possible they would like to make use of compression. The company has tried compressing a 10 MB file with 2 different methods. Method 1 is a lossy compression that reduces the file to 1MB Method 2 is a lossless compression that reduces the file to 5MB. Explain why the company has chosen to use method 2
Answers
Answer:
Explanation:
Wwhich file should you edit for sendmail configuration?
Answers
The file to update for sendmail configuration details and optional settings needed to control the sendmail daemon's behaviour is /etc/mail/sendmail.mc.
Sendmail is a server programme that allows organisations to send email over the Simple Mail Transfer Protocol (SMTP). It is often deployed on a dedicated workstation that takes outgoing email messages and subsequently forwards them to the specified recipient. If a receiver is not immediately accessible, messages are queued, and authentication is offered as a measure to avoid spam. Sendmail, on the other hand, simply sends email and does not support POP or IMAP, which would allow it to accept messages and store them in user inboxes. As a result, Sendmail is usually installed alongside other software that allow users to configure their inboxes.
Learn more about Sendmail here:
https://brainly.com/question/12996669
#SPJ4
write a program that first reads in the name of an input file and then reads the file using the csv.reader() method. the file contains a list of words separated by commas. your program should output the words and their frequencies (the number of times each word appears in the file) without any duplicates. ex: if the input is: input1.csv and the contents of input1.csv are: hello,cat,man,hey,dog,boy,hello,man,cat,woman,dog,cat,hey,boy
Answers
High-level, all-purpose programming languages like Python are available. With the usage of extensive indentation, its design philosophy places an emphasis on code readability.
What is meant by Python?High-level, all-purpose programming languages like Python are available. With the usage of extensive indentation, its design philosophy places an emphasis on code readability. Garbage collection and dynamic typing are features of Python.It supports a number of programming paradigms, such as functional, object-oriented, and structured programming. Python is a computer programming language that is frequently used to create software and websites, automate processes, and perform data analysis. Because Python is a general-purpose language, it may be used to develop a wide range of programs and isn't tailored for any particular issues. Python is a great language for experienced programmers as well. Perhaps due to how simple it is to learn for novices, it is one of the most widely used programming languages in the world.The program in Python, where comments are used to explain each line is as follows:
#This imports csv module
import csv
#This initializes a dictionary
kounter = {}
#This gets input for the file name
fname = input("Filename: ")
#This opens and iterates through the file
with open(fname, 'r') as cfile:
#This reads the csv file
cfile = csv.reader(cfile)
#This iterates through each line
for line in cfile:
#This iterates through each word on each line
for words in line:
#This counts the occurrence of each word
if words not in kounter.keys():
kounter[words] = 1
else:
kounter[words] + 1
#This prints the occurrence of each word
print(kounter)
To learn more about Python refer to:
https://brainly.com/question/26497128
#SPJ4
What program is used to transfer files from one computer to another and can be used to upload your web pages to your Web server?
Answers
File management tasks on a server are performed via FTP clients. Among the list of FTP clients are: FileZilla. With support for FTP, FTPS, and SFTP, this free FTP client is available for Windows, macOS, and Linux.
What is FTP (File Transfer Protocol)?The Transmission Control Protocol/Internet Protocol (TCP/IP) connection format is used by the network protocol known as FTP (File Transfer Protocol) to transfer files between computers. FTP is categorized as an application layer protocol within the TCP/IP stack.The computer of the end user is commonly referred to as the local host in an FTP transaction. A remote host, or server, is typically the second machine in an FTP connection. To transfer data with FTP, both computers must be properly set up and linked to a network. To access these services, clients must have FTP software installed on their computers and servers must be configured to run FTP services.FTP is still frequently used to transfer files behind the scenes for other applications, such as banking services, even though many file transfers may be carried out using HTTP, a different protocol in the TCP/IP suite. Using web browsers, it is occasionally used to download fresh software.To Learn more About FTP clients refer to:
https://brainly.com/question/28486886
#SPJ4
Which of the following is a difference between web pages and social Media?
A. Unlike web pages, social media prohibits users from generating their own content.
B. Unlike web pages social media enables people to connect online and have a conversation.
C. Unlike webpages, social media is not generally interactive.
D. Unlike webpages, social media requires authorization before posting.
Answers
Social media and websites vary in that social media allows users to interact online and converse with one another.
Social media profiles are free to create and may be created by anybody. This makes it simple to promote your small business, but it also makes customers sceptical of any accounts they come across. Social networking is a labyrinth of frauds and dodgy businesses that take your money and disappear. A well-designed website reassures visitors and allows businesses to demonstrate their history, competence, qualifications, and, ultimately, credibility.
People may assume that the rise of social enterprises has rendered company websites obsolete, but what is the difference between a website and social media? Is the importance of websites still relevant in 2020?
The simple answer is no, websites continue to be critical to having a good online presence in 2020. If you want the lengthy answer, go here.
Learn more about Websites here:
https://brainly.com/question/29330762
#SPJ4
What is difference between laptop and desktop?
Answers
Answer:
DESKTOP
The size is huge and heavy
There are multiple internal hard disks
LAPTOP
Small size
Internal hard disks are limited
These are some of many examples
Make a list of symptoms of computer virus and preventive measures from computer virus.
Answers
Answer:
Intrusive pop-ups. Slow performance. Frequent crashes. Unknown login items. Storage space shortage. Missing files.
Explanation:
those are symptoms
if you were to shoot a video that contained a promo message and then shared it with your friends, what is this called? viral video answer print master tape wireframe animation
Answers
If you shot a video that contained a promo message and shared it with your friends, it could be called a viral video.
A viral video is a video that becomes popular through the process of Internet sharing, typically through video sharing websites, social media and email. Viral videos often have a short shelf life, as they are quickly replaced by newer, more popular videos. However, some viral videos can be highly successful in terms of views and influence, and can generate significant attention and publicity for the people or organizations featured in the video. Viral videos can be created intentionally or unintentionally. Some companies and organizations create viral videos as part of a marketing campaign, with the goal of getting as many people as possible to view and share the video.
Learn more about viral video, here https://brainly.com/question/2452527
#SPJ4
What are 3 things the executive branch does?
Answers
The president is in charge of the executive branch, and among his constitutional duties include leading the nation's military forces as commander in chief, negotiating international agreements, selecting ambassadors, cabinet members, and federal judges (including justices of the Supreme Court).
What three explicit presidential powers are there?The President is specifically granted the following powers under the Constitution: signing or vetoing legislation, controlling the military forces, requesting the written opinion of their Cabinet, calling or adjourning Congress, issuing reprieves and pardons, and receiving ambassadors.The president is in charge of the executive branch, and among his constitutional duties include leading the nation's military forces as commander in chief, negotiating international agreements, selecting ambassadors, cabinet members, and federal judges (including justices of the Supreme Court).To learn more about Executive branch refer to:
https://brainly.com/question/81186
#SPJ4
What are the two types of malicious code?
Answers
There are many different types of malicious code, but two common categories are viruses and worms. A virus is a type of malware that is designed to replicate itself and spread to other computers by attaching itself to a host program or file. A worm, on the other hand, is a standalone program that can replicate itself and spread to other computers without needing to attach itself to a host program or file. Other common types of malicious code include Trojans, ransomware, and spyware.
the data you collect on your point-of-sale system could complement data that your website and app sends to analytics. which feature allows for the collection and sending of events directly to analytics servers?
Answers
The data collect on point of syestem could complete data are
What is system?
System is a set of organized components that work together to achieve a specific goal. It can refer to a variety of different concepts, including a computer system, a group of people working together, or a complex network of machines and processes. In each case, the components of a system interact to create an output that is larger than the sum of its individual parts.
Systems are composed of many components, often of different types and from different sources. These components can include hardware, software, people, processes, and data. Systems are designed to be reliable, efficient, and flexible, allowing them to adapt to changing conditions.
The feature that allows for the collection and sending of events directly to analytics servers is called Event Tracking.
With Event Tracking, you can capture data from your point-of-sale system and send it directly to analytics servers, providing a more comprehensive view of your customers' behavior and preferences.
To learn more about system
https://brainly.com/question/22946942
#SPJ4
Which of the following has the least volatile data?
- CPU storage
- RAM
- Hard drive
- Kernel tables
Answers
The option that has the least volatile data is option C: Hard drive.
What are hard drives, and what do they do?A hard disk drive (HDD), often known as a hard disk, hard drive, or fixed disk, is an electro-mechanical data storage device that stores and retrieves digital information utilizing magnetic storage on one or more rigid, quickly rotating platters coated with magnetic material.
Therefore, one can say that the least volatile data of those listed is that found on a hard drive. All other sources are some form of memory, which disappears when a system is switched off.
Learn more about Hard drive from
https://brainly.com/question/1558359
#SPJ1