Answer:
increasing local accounts receivable and decreasing local accounts payable
Explanation:
In simple words, accounts receivables refers to the amount that the company will receive from its debtors and accounts payable is the amount that the company will pay to its creditors. Thus, if the local currency appreciates , the company will receive a higher amount but will be obligated to pay a lower amount.
During the current year, assets increased from $11,000 to $19,000, and liabilities decreased from $9,000 to $7,500. If no additional capital contributions were made during the year, dividends totaled $4,000, and expenses totaled $21,000, determine total revenues for the year
Answer:
$34,500
Explanation:
Calculation to determine total revenues for the year
Using this formula
Total revenues=Increase in Assets+Decreased in liabilities+Dividends+Expenses
Let plug in the formula
Total revenues=($11,000-$19,000)+($9,000-$7,500)+$4,000+$21,000
Total revenues=$8,000+$1,500+$4,000+$21,000
Total revenues=$34,500
Therefore total revenues for the year is $34,500
a. On March 2, Sheridan Company purchased $862,000 of merchandise from Skysong Company, terms 2/10, n/30.
b. On March 6, Sheridan Company returned $110,700 of the merchandise purchased on March 2.
c. On March 12, Sheridan Company paid the balance due to Skysong Company.
Requried:
Prepare the journal entry to record these transaction.
Answer:
Sheridan Company
Journal Entries:
a. March 2: Debit Inventory $862,000
Credit Accounts Payable (Skysong Company) $862,000
To record the purchase of merchandise on credit terms 2/10, n/30.
b. March 6: Debit Accounts Payable (Skysong Company) $110,700
Credit Inventory $110,700
To record the return of merchandise on account.
c. March 12: Debit Accounts Payable (Skysong Company) $751,300
Credit Cash $736,274
Credit Cash Discounts $15,026
To record the payment on account in full settlement, including cash discounts.
Explanation:
1) Data and Analysis:
a. March 2: Inventory $862,000 Accounts Payable (Skysong Company) $862,000 terms 2/10, n/30.
b. March 6: Accounts Payable (Skysong Company) $110,700 Inventory $110,700
c. March 12: Accounts Payable (Skysong Company) $751,300 Cash $736,274 Cash Discounts $15,026
Which of the following institutional investors most likely must spend a target percentage of the portfolio annually?
A. Endowments.
B. Life insurance firms.
C. Property and casualty insurance firms.
Answer: Endowments
Explanation:
The institutional investors that most likely must spend a target percentage of the portfolio annually is the endowments.
Endowment fund refers to the long term fund that is used for perpetual operations and usually set up by colleges or in hospitals
The fund then covers the expenses relating to provision of services for the students. A portion of the endowment is allowed to be use for every fiscal year.
Tech Solutions is a consulting firm that uses a job-order costing system. Its direct materials consist of hardware and software that it purchases and installs on behalf of its clients. The firm’s direct labor includes salaries of consultants that work at the client’s job site, and its overhead consists of costs such as depreciation, utilities, and insurance related to the office headquarters as well as the office supplies that are consumed serving clients. Tech Solutions computes its predetermined overhead rate annually on the basis of direct labor-hours. At the beginning of the year, it estimated that 55,000 direct labor-hours would be required for the period’s estimated level of client service. The company also estimated $302,500 of fixed overhead cost for the coming period and variable overhead of $0.50 per direct labor-hour. The firm’s actual overhead cost for the year was $321,300 and its actual total direct labor was 58,850 hours. Required: 1. Compute the predetermined overhead rate. 2. During the year, Tech Solutions started and completed the Xavier Company engagement. The following information was available with respect to this job: Direct materials $ 50,850 Direct labor cost $ 27,300 Direct labor hours worked 220 Compute the total job cost for the Xavier Company engagement.
Answer:
Tech Solutions
1. The predetermined overhead rate is:
= $6
2. The total job cost for the Xavier Company engagement is:
= $79,470
Explanation:
a) Data and Calculations:
Estimated direct labor-hours for the year = 55,000
Estimated fixed overhead cost = $302,500
Estimated variable overhead cost ($0.50 per DLH) = $27,500
Total overhead costs = $330,000 ($27,500 + $302,500)
Actual overhead cost for the year = $321,300
Actual total direct labor-hours = 58,850
Predetermined overhead rate = $6 ($330,000/55,000)
Xavier Company's Job:
Direct materials $ 50,850
Direct labor cost $ 27,300
Direct labor hours worked 220
Applied overhead = $1,320 ($6 * 220)
Total job cost = $79,470
= Variable overhead rate + fixed overhead rate
= $0.50 + ($302,500 ÷ 55,000 direct labor hours)
= $0.50 + $5.50
= $6.00
2. The total cost should be
= Direct material cost + direct labor cost + overhead cost
= $50,850 + $27,300 + ($6 × 220)
= $50,850 + $27,300 + $1,320
= $79,470
Therefore we can conclude that
The predetermined overhead rate is $6.00.The total job cost is $79,470.Learn more about the total cost here: brainly.com/question/13910351
An example of a positive statement would be
Answer:
D
Explanation:
it would be the last option
On the income statement of a merchandising company, interest income and interest expense are reported: Select one: A. As part of cost of goods sold B. By offsetting interest income and interest expense and showing the excess as an operating revenue or expense C. By showing interest income as additional sales revenue and interest expense as an operating expense D. As separate items of other income and expense below the net operating income or loss
Answer:
On the income statement of a merchandising company, interest income and interest expense are reported:
D. As separate items of other income and expense below the net operating income or loss.
Explanation:
Interest income and expense are financing activities items. They do not form part of the operating income or loss. This is why they are shown separately after the determination of the net operating income or loss but before the deduction of income taxes. The reason for this separation is that for a merchandising company, its operating income or loss does not include earned interest income or interest expense but costs related to the merchandise sold, including selling and administrative expenses.
Suppose the economy is currently in short run macroeconomic equilibrium, with actual GDP bigger than potential GDP.
(a) Depict this situation using AD-AS, being sure to label all curves and axes. What is the gap called?
(b) In the long run, what will happen to prices and output? Depict graphically and explain.
Answer:
attached below
Explanation:
Given that the economy has its actual GDP > potential GDP
A) using AD-AS to depict the situation
attached below is the graph
The gap( Lf - L1 ) is called inflationary gap
x-axis = real GDP , Y-axis = price level,
AD = aggregate demand curve , S = short run aggregate supply curve
L = long run aggregate supply curve,
B) In the long run the graph will adjust to the full employment level
attached below is the graph
I need help with 1.5 ,1.6 and 1.7 please
Answer:
1.5.1 Business venture/Venture capital
1.5.2 a) Risk: High risk for the investor(s), if research is not properly done
b) period of investment: Inexperienced
business owners that make wrong
business decisions may experience
big losses/closing down of an existing
business.
1.6.1 unit trusts
1.6.2 - share price may fluctuate
- unit trusts are not allowed to borrow,
therefore reducing potential returns.
- not good for people who want to invest for
a short period
- not good for people who want to avoid
risks at all costs
1.5.1 Stocks, also known as shares or equities, is the best type of investment opportunity i would choose in future.
It is most well-known and simple type of investment. When you buy stock, you’re buying an ownership stake in a publicly traded company.
Benefit of investment in stocks:
A. Dividend it the profit that i will get on shares
B. When I will buy a stock, there will be a hope that the price will go up so I can then sell it for a profit.
1.5.2 (a) The risk is that the price of the stock could go down, in which case I’d lose money.
1.5.2 (b) Shares in a company can be kept as long as I wish.
1.6.1 The investment chosen by Pearl is the investment in shares (joint stock exchange)
1.6.2 Disadvantages are dividend uncertainty, high risk, fluctuation in market price, limited control, residual claim etc.
*I hope it is helpful
PillPack is an example of a startup organization that grew out of the identification of a problem that needed a solution.
a. True
b. False
Answer:
True
Explanation:
April 30 May 31
Inventories
Raw materials $37,000 $42,000
Work in process 9,800 18,600
Finished goods 58,000 34,900
Activities and information for May
Raw materials purchases (paid with cash) 189,000
Factory payroll (paid with cash) 150,000
Factory overhead
Indirect materials 7,000
Indirect labor 34,500
Other overhead costs 101,000
Sales (received in cash) 1,200,000
Pre-determined overhead rate based on direct labor cost 55%
Compute the following amounts for the month of May using T-accounts
1. Cost of direct materials used.
2. Cost of direct labor used.
3. Cost of goods manufactured.
4. Cost of goods sold.
5. Gross profit.
6. Overapplied or underapplied overhead.
Answer:
1. Cost of direct materials used
= $177,000
2. Cost of direct labor used
= $150,000
3. Cost of goods manufactured
= $400,700
4. Cost of goods sold
= $423,800
5. Gross profit
= $776,200
6. Overapplied or underapplied overhead
= $60,000 Underapplied
Explanation:
a) Data and Calculations:
Inventories
Raw materials $37,000 $42,000
Work in process 9,800 18,600
Finished goods 58,000 34,900
Activities and information for May
Raw materials purchases (paid with cash) 189,000
Factory payroll (paid with cash) 150,000
Factory overhead
Indirect materials 7,000
Indirect labor 34,500
Other overhead costs 101,000
Sales (received in cash) 1,200,000
Predetermined overhead rate based on direct labor cost = 55%
T-accounts:
Raw materials
Account Titles Debit Credit
Beginning balance $37,000
Cash 189,000
Factory overhead $7,000
Work in process 177,000
Ending balance $42,000
Totals $226,000 $226,000
Work in process
Account Titles Debit Credit
Beginning balance $9,800
Direct materials 177,000
Direct labor 150,000
Applied overhead 82,500
Finished goods $400,700
Ending balance $18,600
Totals $419,300 $419,300
Finished goods
Account Titles Debit Credit
Beginning balance $58,000
Work in process 400,700
Cost of goods sold $423,800
Ending balance $34,900
Totals $458,700 $458,700
Factory overhead
Account Titles Debit Credit
Indirect materials $7,000
Indirect labor 34,500
Other costs 101,000
Work in process $82,500 (55% of direct labor)
Under-applied overhead 60,000
Total $142,500 $142,500
Sales (received in cash) 1,200,000
Cost of goods sold 423,800
Gross profit = 776,200
Before starting up a team to handle a big contract with a new client, the team leader identified the most important skills and expertise that the team would need, and then staffed the team with this expertise. This meant putting employees from production, marketing, finance, and sales on the team. You want to find a way to reduce the waste your company generates so you create this type of team. This type of team is particularly difficult to implement because it requires specific self-management and team skills that many employees lack.
Answer: a. Cross functional team
b. Problem solving team
c. Self directed team
Explanation:
a. Cross-functional team refers to the group of people that has different functional expertise whom work tomorrow together towards a common goal. It basically includes all the employees in an organization.
b. Problem Solving Teams are the team that's formed in an organization in order to solve a particular problem. Since the company wants to find a way to reduce the waste that's generated, this team was formed
c. Self-directed work team is a team that's made up of people who combine their skills, experiences and talents together and work without being supervised in order to achieve a common goal. This type of team is particularly difficult to implement because it requires specific self-management and team skills that many employees lack.
Alfredo was one of many employees who received a generous Christmas bonus, which carried __________ value to him.
Answer:
Surface.
Explanation:
An employee can be defined as an individual who is employed by an employer of labor to perform specific tasks, duties or functions in an organization.
Basically, an employee is saddled with the responsibility of providing specific services to the organization or company where he is currently employed while being paid a certain amount of money hourly, daily, weekly, or monthly depending on the contractual agreement between the two parties (employer and employee).
Hence, while an employer may be the owner of a business firm or company, an employee is a subordinate employed to provide unwavering services to the employer while also, being professional and diligent at all times.
In this scenario, Alfredo was one of many employees who received a generous Christmas bonus, which carried surface value to him because it's an amount of money that was received by all.
Job 148 requires $12,000 of direct materials, $6,700 of direct labor, 550 direct labor hours, and 270 machine hours. It also requires 9 hours of inspection at $40 per hour. Manufacturing overhead is computed at $28 per direct labor hour used and $42 per machine hour used. The total amount of overhead allocated is: a. $34,100. b. $26,740. c. $45,440. d. $15,400.
Answer:
b. $26,740
Explanation:
The computation of the total amount of overhead allocated is shown below:
overhead allocated is
= (actual direct labor hour × overhead rate per direct labor hour) + (Actual machine hour × overhead rate per machine hour)
= (550 × 28) + (270 × 42]
= $15,400 + $11,340
= $26,740
hence, the total amount of overhead allocated is $26,740
What are the four types of organization structures
Answer:
1. Functional
2. Divisional
3. Matrix
4. Flat
Explanation:
Have a nice day :)
Answer:
Four main organizational structure types are:
I. Functional
II. Divisional
III. Matrix
IV. Flat
Explanation:
I. Functional Structure:
Employees performing similar or similar tasks are grouped together in this structure. For example, the financial department consists of accountants, and the same is true in the departments of marketing, operations, and human resources. This structure makes quick decision-making possible because the members of the group have the same skills and interests to communicate easily and can improve their capacities by learning from each other.
II. Divisional Structure
This structure groups employee's by-products or projects that satisfy the requirements of a certain customer type. For example, a catering service restaurant could structure the staff in different departments, such as a wedding service or a department of wholesale retail services. Workers are divided in order to achieve maximum efficiency.
III Matrix Structure:
A matrix structure has a complex story structure since it combines both functional and divisional elements. It first divides employees by specialization, then divides them into departments by project and product. A lot of planning and effort is needed to make this structure but one e has increased the team's productivity, encourages innovation and creativity, and good decision-making.
IV Flat Structure:
The traditional top-down management system is prevented by a flat organizational structure. No concept of boss is in place, every employee is their own boss, eliminating bureaucracy and enhancing direct communication. An employee with an innovative idea or proposal, for example, does not contact every level of senior management in order for the manager to get the idea. The staff can communicate with each other directly at a peer level.
Stout Corporation had net income of $200,000 and paid dividends to common stockholders of $40,000 in 2012. The weighted average number of shares outstanding in 2012 was 50,000 shares. Stout Corporation's common stock is selling for $75 per share on the New York Stock Exchange. Stout Corporation's price-earnings ratio is Group of answer choices
Answer:
18.75
Explanation:
The computation of the price-earning ratio is given below:
We know that
Price-Earning Ratio = Price Per Share ÷ Earning Per Share
Earning Per Share = Net Earnings ÷ Outstanding Shares
So,
Price-Earning Ratio = Price Per Share ÷ (Net Earnings ÷ Outstanding Shares)
= $75 ÷ ($200,000 ÷ 50,000)
= 75 ÷ 4
= 18.75
On May 1, 2020, Ayayai Company issued 2,400 $1,000 bonds at 102. Each bond was issued with one detachable stock warrant. Shortly after issuance, the bonds were selling at 99, but the fair value of the warrants cannot be determined.
Instuctions
a. Prepare the entry to record the issuance of the bonds and warrants
b. Assune the same facts as part (a), except that the warrants had a fair value of $30. Prepare the entry to record the issuance of the bonds and warrants.
Answer:
A. Dr Cash $2,448,000
Dr Discount on bond payable $24,000
Cr Bond payable $2,400,000
Cr Paid in capital stock warrants $72,000
B. May 1
Dr Cash $2,448,000
Dr Discount on bonds payable $24,713
Cr Bonds payable $2,400,000
Cr Paid in capital stock warrants $72,713
Explanation:
a. Preparation of the entry to record the issuance of the bonds and warrants
May 1
Dr Cash $2,448,000
Dr Discount on bond payable $24,000
Cr Bond payable $2,400,000
Cr Paid in capital stock warrants $72,000
(To record the issuance of the bonds and warrants )
Workings:
Cash = (2,400 * 1,000) * 102%
Cash = 2,400,000 * 1.02
Cash = $2,448,000
Discount on bond payable = (2,400 * 1,000) * (1 - 99%)
Discount on bond payable = 2,400,000 * 0.01
Discount on bond payable = $24,000
Bond payable = 2,400 * 1,000
Bond payable = $2,400,000
Paid in capital stock warrants = 2,448,000 + 24,000 - 2,400,000
Paid in capital stock warrants = $72,000
b.Preparation of the entry to record the issuance of the bonds and warrants Assume the same facts as part (a), except that the warrants had a fair value of $30.
May 1
Dr Cash $2,448,000
Dr Discount on bonds payable $24,713
Cr Bonds payable $2,400,000
Cr Paid in capital stock warrants $72,713
(To record the issuance of the bonds and warrants )
Workings:
Fair value of bonds = (2,400 * 1,000) * 98%
Fair value of bonds = 2,400,000 * 0.98
Fair value of bonds = $2,352,000
Fair value of warrants = 2,400 * 30
Fair value of warrants = $72,000
Fair value = $2,352,000 + 72,000
Fair value = $2,424,000
Allocated to bonds=$2,352,000/$2,424,000*$2,448,000
Allocated to bonds=$2,375,287
Allocated to warrants=$72,000/$2,424,000*$2,448,000
Allocated to warrants=$72,713
Cash = 2,400 * 1,000 * 102%
Cash = 2,400,000 * 1.02
Cash = $2,448,000
Discount on bonds payable = 2,400,000 - $2,375,287
Discount on bonds payable = $24,713
Travis Company purchased merchandise on account from a supplier for $11,100, terms 2/10, net 30 on December 26. Travis Company paid for the merchandise on December 31, within the discount period.
Required:
Under a perpetual inventory system, record the journal entries required for the above transactions. Refer to the Chart of Accounts for exact wording of account titles.
Record the journal entries on each transaction. Refer to the Chart of Accounts for exact wording of account titles.
PAGE 1
JOURNAL
DATE DESCRIPTION POST. REF. DEBIT CREDIT
1
2
3
4
Answer and Explanation:
The journal entries are shown below:
On Dec 26
Inventory $11,100
To Accounts payable $11,100
(Being the purchase merchandise on account is recorded)
On Dec 31
Account payable $11,100
To Discount on account payable (2% of $11,100) $222
To Cash $10,878
(being the cash paid is recorded)
These two entries should be recorded
Prepare a Master Schedule given the following information:
Forecast for each week for an eight-week schedule is 75 units.
The Master Production Schedule (MPS) rule is to schedule production if the projected on-hand inventory would be negative without it.
Committed customer orders are as follows:
WeeWeek CjusCustomer order
1 75
2 53
3 26
4 18
Use a production lot size of 100 units and no beginning inventory.
Week
1 2 3 4 5 6 7 8
Forecast 75 75 75 75 75 75 75 75
Customer Orders 75 53 26 18 0 0 0 0
Projected On-Hand Inventory
MPS
Formulas for Projected On-Hand Inventory
Week 1 = Beginning Inventory + MPS – MAX (Forecast:Customer Order)
Highest number
Weeks 2 – 8 = Previous Week Inventory + MPS – (Forecast: Customer Order)
Because the problem says we cannot have any negative inventory, then we require MPS shipments to come in. When a shipment comes in, it is in lots of 100. In this problem, MPS will be added for Weeks 1,2,3 and Weeks 5, 6, 7. No MPS shipments are expected in Week 4 or Week 8.
Answer:
Master Production Schedule (MPS)
Week 1 2 3 4 5 6 7 8
Forecast Customer Order 75 75 75 75 75 75 75 75
Customer Orders 75 53 26 18 0 0 0 0
Projected On-Hand Inventory 25 50 75 0 25 50 75 0
MPS 100 100 100 0 100 100 100 0
Explanation:
a) Data and Calculations:
Master Production Schedule (MPS)
Week 1 2 3 4 5 6 7 8
Forecast Customer Order 75 75 75 75 75 75 75 75
Customer Orders 75 53 26 18 0 0 0 0
Projected On-Hand Inventory
MPS
Formulas for Projected On-Hand Inventory
Week 1 = Beginning Inventory + MPS – MAX (Forecast:Customer Order)
Highest number
Weeks 2 – 8 = Previous Week Inventory + MPS – (Forecast: Customer Order)
Risk assessment is a process A. That assesses the quality of internal control throughout the year. B. That establishes policies and procedures to accomplish internal control objectives. C. Designed to identify potential events that may affect the entity. D. Of identifying and capturing information in a timely fashion.
Answer:
C. Designed to identify potential events that may affect the entity.
Explanation:
Risk assessment means the total method in which the hazard or the factors related to the risk that result in damage or harm something. It could be analyzed and evaluated with the analysis of the risk and the evaluation of the risk.
It is to be designed in order to identify the events that could impact the entity
Therefore the option c is correct
please help me this question answer:
In 2016, David Hay started his own business, Hays Gardening and Landscapes. David was previously an employer of another business/
a) What was the opportunity costs for David when he started his business?
A. Cost of marketing to attract customers.
B. Loss of earnings from employment
C. Payment of taxes on profits
D. Risk of business failure
ANSWER:
b) Explain why this answer is correct?
Answer: B. Loss of earnings from employment
Explanation:
Opportunity cost refers to the loss of other alternatives when another alternative is being chosen. It is the potential benefit that an individual, firm or government misses out on when a different alternative is being selected.
Based on the question given, the opportunity costs for David when he started his business will be the earnings that he got from his previous employment such as the wages or the salaries, bonuses etc. Since he has began his own business, he can't enjoy those benefits anymore.
I think home ownership is important to most Americans today because they want to have the pride of owning their own home and they want to change it up to make it their own
Answer:
owww
Explanation:
LOL Music Store uses the perpetual inventory system to account for its merchandise. On November 17, it purchased $1,000 of merchandise with terms of 2/5,n/60. If payment is made on November 21. Demonstrate the required journal entry to record the payment.
Answer:
LOL Music Store
Journal Entry to record the payment:
November 21:
Debit Accounts Payable $1,000
Credit Cash $980
Credit Cash Discounts $20
To record the payment on account.
Explanation:
a) Data and Analysis:
November 17: Inventory $1,000 Accounts Payable $1,000
November 21: Accounts Payable $1,000 Cash $980 Cash Discounts $20
b) When LOL Music Store uses the perpetual inventory system to account for its merchandise, it debits the Inventory account instead of the Purchases account on November 17. The credit entry goes to the Accounts Payable account. On November 21, when payment is made, the Accounts Payable is debited while the Cash account and Cash Discounts are correspondingly credited.
Operating Cash Flows (Direct Method)
Refer to the information in Exercise EB-31. Calculate the net cash flow from operating activities using the direct method. Show a related cash flow for each revenue and expense.
Answer:
The method to calculate Cash Flow from Direct Method is explained as follows:
Explanation:
The method to calculate Cash Flow from Direct Method is explained as follows:
Cash Flows
Direct Method
+ Cash received from Customer
- Cash paid to suppliers
- Cash payments for operating expenses
- Cash payments for interest
- Cash payments for taxes
= Net Cash flow from Operating Activities.
The Zeron Corporation wants to purchase a new machine for its factory operations at a cost of $950,000. The investment is expected to generate $350,000 in annual cash flows for a period of four years. The cost of capital is 14%. The old machine can be sold for $50,000. The machine is expected to have zero value at the end of the four-year period. Income taxes are not considered. What is the net present value of the investment
Answer:
$119,799.31
Explanation:
The net present value of purchasing the new machine is the present value of its future cash flows discounted at the 14% cost of capital minus the initial investment outlay.
The initial investment outlay is the cost of the new machine minus the salvage value of the old machine, since the proceeds received from disposing of the old machine can be used in funding the new machine partly.
Initial investment outlay=$950,000-$50,000
Initial investment outlay=$900,000
NPV=$350,000/(1+14%)^1+$350,000/(1+14%)^2+$350,000/(1+14%)^3+$350,000/(1+14%)^4-$900,000
NPV=$119,799.31
Which economic concept helps explain the changing demand for jewelry?
A. fungibility
b. non-excludability
c. substitution
d. elasticity
Answer:
A.fungibility is a economic concept which helps explain the changing demand for jewelry.
As
Fungibility is the ability of a good or asset to be interchanged with other individual goods or assets .
what role does planning play in public sector
Hello there! The answer is below.
Explanation:
Planning plays a very big role in the public sector. Planning lets you measure how big your response has to be to something, especially in business. It lets use utilize your resources and make as much as you need. When you plan in the public sector of marketing, you can also plan what to sell and align your priorities.
Answer:
Since the public sector is usually in charge of creating and directing defense, it also usually retains power over how troops are paid, training mechanisms, and rules of combat. Foreign policy is another area in which it is important to present a unified front through the public sector, in order to prevent conflicting treaties and agreements.
Explanation:
g A price ceiling that is set below the equilibrium price _____ . Group of answer choices causes suppliers to lose money creates a shortgage creates a supplus is non-binding
Answer:
creates a shortage
Explanation:
Price ceiling is when the government or an agency of the government sets the maximum price for a product. It is binding when it is set below equilibrium price.
Because price is set below equilibrium price, demand would outstrip supply and this would lead to a shortage
Effects of a price ceiling
1. It leads to shortages
2. it leads to the development of black markets
3. it prevents producers from raising price beyond a certain price
4. It lowers the price consumers pay for a product. This increases consumer surplus
Terrell Corporation produces various products used in the construction industry. The plumbing division produces and sells100,000 copper fittings each month. Relevant information for last month follows:
Total sales (all external) $250,000
Expenses (all on a unit base):
Variable manufacturing $0.50
Fixed manufacturing .25
Variable selling .30
Fixed selling .40
Variable G & A .15
Variable G & A .50
Total $2.10
Top-level managers are trying to determine how a transfer price can be set on a transfer of 10,000 of the copper fittings from the Plumbing Division to the Bathroom Products Division.
1. Refer to Terrell Corporation. A transfer price based on variable cost will be set at ________ per unit.
a) $0.50
b) $0.65
c) $0.95
d) $1.10
2. Refer to Terrell Corporation. A transfer price based on full production cost would be set at ______ per unit.
a) $0.75
b) $1.45
c) $1.60
d) $2.10
3. Refer to Terrell Corporation. A transfer price based on market price would be set at __________ per unit.
a) $2.10
b) $2.50
c) $1.60
d) $2.25
4. Refer to Terrell Corporation. If the Plumbing Division is operated as an autonomous investment center and its capacity is 100,000 fittings per month, the per-unit transfer price is not likely to be below
a) $0.75
b) $1.60
c) $2.10
d) $2.50
Answer:
Terrell Corporation
1. Refer to Terrell Corporation. A transfer price based on variable cost will be set at ________ per unit.
c) $0.95
2. Refer to Terrell Corporation. A transfer price based on full production cost would be set at ______ per unit.
d) $2.10
3. Refer to Terrell Corporation. A transfer price based on market price would be set at __________ per unit.
b) $2.50
4. Refer to Terrell Corporation. If the Plumbing Division is operated as an autonomous investment center and its capacity is 100,000 fittings per month, the per-unit transfer price is not likely to be below
d) $2.50
Explanation:
a) Data and Calculations:
Monthly production and sales units of the plumbing division = 100,000
Total sales (all external) $250,000
Expenses (all on a unit base):
Variable manufacturing $0.50
Fixed manufacturing .25
Variable selling .30
Fixed selling .40
Variable G & A .15
Fixed G & A .50
Total $2.10
Variable manufacturing $0.50
Variable selling .30
Variable G & A .15
Total variable costs (unit) $0.95
If the inflation rate is equal to the nominal interest rate, the real interest rate is?
negative.
zero.
either positive or zero.
positive.
Answer: zero
Explanation:
It should be noted that real interest rate is the equal to the nominal interest rate after the inflation rate has been deducted.
Real Interest rate = Nominal rate - Inflation rate
For example let's say the nominal Interest rate and the inflation rate are both 5%, then the real interest rate will be:
Real Interest rate = Nominal rate - Inflation rate
Real interest rate = 5% - 5% = 0
When the market for ___________ money is drawn with the value of money on the vertical axis and the quantity of money on the horizontal axis, the price level increases if money demand shifts _____________
Answer:
money demand; leftward
Explanation:
Money demand depends upon the interest rate as well as the price level.
When the money market is been drawn with a value of the money on the [tex]\text{vertical axis}[/tex], the quantity of money demanded is increased and the price level also increases. Also the curve slopes downward. But it decreases the the money supply as well as the price level.
When the money demand shifts towards left or when the money supply shifts rightwards, the price level increases.