A) Why should assembly language be avoided for general application development?
B) Under what circumstances would you argue in favor of using assembly language for developing an assembly language program?
C) What are the advantages of using a compiled language over an interpreted one?
D) Under what circumstances would you choose to use an interpreted language?

Answer:

•Determine your IP address.

•Verify physical connectivity to the network.

•Check that you have a logical connection to the network.

•Find out what path network traffic takes to get to its destination.

Translate from DNS names to IP addresses.

If we use a minus sign to make a negative number like -2. Then the following terms will be:

A calculation is a methodical, well-thought-out process. Calculating the solution to a math problem is the first type of calculation, for which you might use a calculator. The calculation also includes applying logic to a non-numerical issue.

Plus, minus, multiply, and divide are the basic signs used in math to calculate problems. These signs also change when come n contact with each other, like plus and minus are equal to minus.

Like here, 2 - -2. Minus and minus is plus, so two plus two is four.

2 + -2 = 0, here plus minus = minus, so two minus two is 0.

Therefore, the calculation for the given is

To learn more about calculation, refer to the link:

https://brainly.com/question/14106833

#SPJ2

Answer:

Training data is used to fine-tune the algorithm’s parameters and evaluate how good the model is

Explanation:

The statement about datasets used in Machine Learning that is NOT true is "Training data is used to fine-tune algorithm’s parameters and evaluate how good the model is."

This is based on the fact that a Training dataset is a process in which a dataset model is trained for corresponding it essentially to fit the parameters.

Also, Testing the dataset is a process of examining the performance of the dataset. This refers to hidden data for which predictions are determined.

And Validation of dataset is a process in which results are verified to perfect the algorithm's details or parameters

Answer:

An extract from the answer is as follows:

for i in salary:

 total_salary+=float(i)

 count+=1  

return round(total_salary/count,2)

def getMonth(date):

ddate = []

for i in date:

 ddate.append(i.split('/')[0])

mode = int(max(set(ddate), key=ddate.count))

return mode  

def highestHireMonth(filename):

month = []

See explanation for further details

Explanation:

Given

Attachment 1 completes the question

The complete answer could not be submitted. So, I've added it as an attachment.

See attachment 2 for program source file which includes the main method.

Comments are used to explain difficult lines

Answer:

The method in Java is as follows:

public static char letterGrade(int average){

    char grade =' ';

    if(average>= 90 && average <=100){ grade ='A'; }

    else if(average>= 80 && average <=89){ grade ='B'; }

    else if(average>= 70 && average <=79){ grade ='C'; }

    else if(average>= 60 && average <=69){ grade ='D'; }

    else if(average>= 0 && average <=59){ grade ='F'; }

    return grade;

}

Explanation:

This defines the method

public static char letterGrade(int average){

This initializes the grade to a blank

    char grade =' ';

If average is between 90 and 100 (inclusive), grade is A

    if(average>= 90 && average <=100){ grade ='A'; }

If average is between 80 and 89 (inclusive), grade is B

    else if(average>= 80 && average <=89){ grade ='B'; }

If average is between 70 and 79 (inclusive), grade is C

    else if(average>= 70 && average <=79){ grade ='C'; }

If average is between 60 and 69 (inclusive), grade is D

    else if(average>= 60 && average <=69){ grade ='D'; }

If average is between 0 and 59 (inclusive), grade is F

    else if(average>= 0 && average <=59){ grade ='F'; }

This returns the grade

    return grade;

}

Answer:

this say's "Which device group?" hope i helpped

Answer:

Outlook Web App

Explanation:

For Brody to accomplish this he will need to go to the Outlook Web App. Here, he will need to navigate to the top of the application where the toolbar is located. Then he will need to click on File, then Tools, and finally Mailbox Cleanup. This will give him access to all of the cleanup tools that the Outlook Mailbox has for managing all of his electronic mail as well as adjusting the quota set for his mailbox.

Answer:

A. Backstage view indox

Explanation:

Answer:

Health and Safety using ICT Tools.

...

Some of the long-term health effects are:

Headaches and tiredness. Using the mobile phone for hours can be very stressful and may lead to mild or severe headaches.

Creates joint pain. ...

Mobile phone battery explosion. ...

Induced ringing!

Answer:

ICT tools for health and safety. Find common health issues related to computer usage and other ICT tools.

Explanation:

Use of ICT instruments

ICT tools are computer-based equipment used for processing and communicating information and technology. There are certain ICT tools;

- TV.

- System of Public Address

- Radio

- Mobile Phone

- Computer

What are the adverse consequences of long-term television exposure?

You don't have eyes for hours to stare at the TV.

Taking hours on the TV can be dangerous and dangerous for the eye.

If you starve continuously, your eye will get overworked and this will cause an irritation of the eye, such as dry eye, red, itchy, and watery eyes, fatigue, eyelid weight or forehead, as well as eye concentration.

Certain long-term effects on health are:

1. Tiredness and headaches.

2. Make pain joint.

3. Battery explosion mobile phone.

4. Ringing induced! In ears.

Answer:

it's small amd you can carry it everywhere

easy to use

long lasting battery

Explanation:

hope the answers are right:)

Answer:

POP

Explanation:

The application layer protocol that is been used here is POP, given that you issued a transmission to the socket on you LAN: 10.1.145:110.  and you use a standard port designation

Reason:

110 ( port number ) represents a POP3 process that is always used in a TCP/IP network , and the socket address started with an IP address as well. hence we can say that the application layer protocol is POP

Answer:

true

Explanation:

the derivative of lnx is 1/x and 1/x is and odd function because x^-1 is raise to a negative odd number

Answer:

jidjdjdjdkdjdjkdjdhdjurjrhrjdjdjdjdjddjjd

Explanation:

kkfjfjfjfjfjfjfjfjfjjfjfjffjjfjfjfjfjf sorry po

Answer: Send status report when I complete an assigned task

Explanation:

In order to be aware of their progress, the option to choose is the "Send status report when I complete an assigned task".

To do this click on options on the tools menu, then click on task options. Then, after the keep updated copies of the assigned tasks on my task list has been selected in the check box, one will then select "Send status reports when the assigned tasks are completed".

Answer:

Any seven multimedia keys are :-

□Special keys

□Alphabet keys

□Number keys

□Control keys

□Navigation keys

□Punctuation keys

□Symbol keys

Answer:

I believe the answer would be D. Data Reporting!

hope this helps! <3

Answer:

Correct Answer D:- DATA Reporting.

Explanation:

Data reporting is the collection and submission of data that leads to accurate ground-based analysis incorrect data reporting can lead to extremely informed decision-making using wrong evidence. Data reporting is not only about information but also about data collection.

The reporting of data may be an unbelievably difficult task. In order to achieve the job of counting every resident of a country, census bureaus can hire even hundreds of thousands of workers.

Data reporting is a step that translates raw information into information. It is not the data analysis that transforms data and information into insights. If data is not reported, the problem is known as underreporting the opposite is wrong.

Answer: Operating system

Explanation:

The components that will be required to upgrade as well to take full advantage of the new processor is the Operating system.

The operating system manages the software resources and the computer hardware, through the provision of common services for the computer programs. It simply supports the basic function of the computer like task scheduling

Answer:

d. RAID 6

Explanation:

RAID is a data storage technology that combines multiple physical disk drive components into a single logical unit. The functions of RAID is to provide performance and redundancy.

RAID 0 provides data stripping but it does not offer data stripping.

RAID 1 increases performance to about 2x but it limits the disk capacity to about 50%

RAID 5 provides redundancy and increased perfomance but it is limited to small disk drive.

RAID 6 also provides redundancy but it slows performance

RAID 10 increases performance and data protection.

RAID 6 is the best drive that offers redundancy over performance.

Answer:

slide sorter view

Explanation:

Explanation: while you can use 3/4 of these options to reorder slides, it is more common to use slide sorter view.

Slide sorter view. while you can use 3/4 of these options to reorder slides, it is more common to use slide sorter view.

You can see and sort the presentation slides in PowerPoint using the Slide Sorter view. Click the "Slide Sorter" button in the presentation view buttons in the Status Bar to enter the Slide Sorter view.

The presentation slides can be added to, removed from, and copied using the Slide Sorter view. The visual flow of the presentation is also displayed in PowerPoint's Slide Sorter view. Additionally, you may add and observe a slide transition animation here.

  All of the presentation slides in PowerPoint's Slide Sorter mode are displayed as thumbnails. The slide's content cannot be changed in this view. However, many of the functions available in the PowerPoint Slide Sorter view

Therefore, Slide sorter view. while you can use 3/4 of these options to reorder slides, it is more common to use slide sorter view.

To learn more slide sorter view, refer to the link:

https://brainly.com/question/7696377

#SPJ7

Explanation:

a magazine cause it helps put out commercial

Answer:

Centralized Processing

Explanation:

Centralized processing was developed to process all of the data in a single computer, and since the first computers were stand-alone with all input and output devices in the same room, only the largest organizations could afford to use centralized processing.

Answer:

DNS provides a name to number (IP address) mapping or translation, allowing internet users to use, easy to remember names, and not numbers to access resources on a network and the Internet.

Thank you.......

Have a good day......

Answer:

DNS stand for Domain Name System

Explanation:

The benefits of DNS are that domain names: can map to a new IP address if the host's IP address changes. are easier to remember than an IP address. allow organizations to use a domain name hierarchy that is independent of any IP address assignment.

Is this one are you looking for??

Answer:

The function in Python is as follows:

def reverse(inputstr):  

   outputstr = ""

   for i in inputstr:

       outputstr = i + outputstr

   return outputstr

Explanation:

This defines the function

def reverse(inputstr):

This initializes the output string

   outputstr = ""

This iterates through the input string

   for i in inputstr:

This generates the output string by reversing the input string

       outputstr = i + outputstr

This returns the reversed string

   return outputstr

Answer: Its............ A Chromebook type of Chromebook...??

Explanation:

Ion know I aint a geek, geezer -_- (Thats a lie)

Answer:

Mobile app creation platforms are available that reduce the need to code.

Explanation:

Simple app creation softwares and tools are all over the place for mobile app creation. To create a mobile app, no coding knowledge or experience is needed unlike desktops apps that requires the knowledge of some coding languages like python, JavaScript etc.

The availability of these softwares and platforms have made mobile apps creation easy.

Answer:

Think of a firewall as your own personal security guard. The firewall will block unapproved websites from talking to your computer and will stop your computer from talking to unapproved/unnecessary websites. Hope this helps!

Explanation:

The question is incomplete. The complete question is :

Holly the Hacker has a list of 100,000 common passwords. She wants to use this list to break into UNIX-like systems that use a password file with lines consisting of:

The user's ID in plaintext.

10 bits of randomly chosen "salt," in plaintext.

The user's password, concatenated with the salt, and then encrypted.

There are very many such systems around the world, and Holly plans to steal the password files from as many as she can. The average system has 50 users in its password file.

Holly wants to create a master list of the encrypted versions of all the 100,000 passwords on her list, encrypted with all possible salt values. To create this master list, approximately how many encryptions of a password-concatenated-with-salt would Holly have to perform?

A. 2 million

B. 5 million

C. 100 million

D. 1 million

Solution :

It is given that the hacker, Holly wants break into the  UNIX-like systems using 100,000 common passwords that she has on her list. The system has at an average of 50 users in the password files.

Therefore, to create a master list, Holly have to perform about 50 x 100,000 = 5,000,000 encryptions for the password concatenated-with-salt.

Thus the correct option is option (B).  5 million

Answer:

Here the code is given as follows,

Explanation:

Code:

import java.util.Scanner;

//created class named largeintegers

class largeintegers{

   //class can hold a long number

   long number;

   //constructor to set number

  largeintegers(long number){

      this.number=number;

  }

  //getNumber method to get number

  long getNumber(){

      return number;

  }

  //below are some basic operations

  long addition(long num1,long num2){

       return num1+num2;

   }

   long subtract(long num1,long num2){

       return num1-num2;

   }

   long multiply(long num1,long num2){

       return num1*num2;

   }

   boolean compare(long num1,long num2)

   {

       return num1>num2;

   }

  public static void main(String[] args) {

      //declared to long numbers

      long number1,number2;

      //scanner class to take user input

      Scanner sc= new Scanner(System.in);

      //taking input numbers

      System.out.println("Enter a Number ");

      number1=sc.nextLong();

      System.out.println("Enter 2nd Number :");

      number2=sc.nextLong();

      //created two objects

      largeintegers object=new largeintegers(number1);

      largeintegers object2=new largeintegers(number2);

      //displaying two numbers

      System.out.println("Entered Numbers ");

      System.out.println(object.getNumber());

      System.out.println(object2.getNumber());

      //calling basic methods using created objects

      System.out.println("Some Operations on Given two Numbers ");

      System.out.println("Addition:"+object.addition(object.getNumber(), object2.getNumber()));

      System.out.println("Subtraction:"+object.subtract(object.getNumber(), object2.getNumber()));

      System.out.println("Multiplication:"+object.multiply(object.getNumber(), object2.getNumber()));

      System.out.println("Comparison:");

      if(object.compare(object.getNumber(), object2.getNumber())==true)

      {

          System.out.println("First Number is Greater than Second Number ");

      }

      else

      {

          System.out.println("Second Number is Greater than First Number ");

      }

      sc.close();

  }

}

Output:-

Answer:

Explanation:

The following is written in Java. It creates a while loop that requests price from the user and goes adjusting the quantity and subtotal as more prices are added. If 0 is entered it breaks the loop and outputs the quantity, subtotal, tax, and grand total to the user.

import java.util.Scanner;

class Brainly {

   public static void main(String[] args) {

       Scanner in = new Scanner(System.in);

       int quantity = 0;

       double subtotal = 0;

       double tax, grandTotal;

       while (true) {

           System.out.println("Enter a price: ");

           double price = in.nextDouble();

           if (price == 0) {

               break;

           } else if (price > 0) {

               quantity += 1;

               subtotal += price;

           }

       }

       tax = subtotal * 0.075;

       grandTotal = subtotal + tax;

       System.out.println("Quantity: $" + quantity);

       System.out.println("Subtotal: $" + subtotal);

       System.out.println("Tax: $" + tax);

       System.out.println("GrandTotal: $" + grandTotal);

   }

}

Answer:

A = False, B = True

Explanation:

|| is equal OR. To the expression be true, you need one of them to be true or both.

A = TRUE, B = FALSE

Returns true

A = FALSE, B = FALSE

Returns true

A = TRUE, B = TRUE

Returns true

Answer:

Following are the code to the given question:

#include<iostream>//header file

#include<iomanip>//header file 

using namespace std;

int main()//main method

{

  double temperatures[7][2];//defining a double array temperatures

  double lowAvg=0, highAvg=0;//defining a double variable

  for(int i = 0;i<7;i++)//defining loop to input the value

  {

     cout<<"Enter day "<<(i+1)<<" highest temperatures: ";//print message  

     cin>>temperatures[i][0];//input highest temperatures value

     cout<<"Enter day "<<(i+1)<<" lowest temperatures: ";//print message  

     cin>>temperatures[i][1];//input lowest temperatures value

  }  

  cout << fixed << setprecision(1);//using the setprecision method  

   for(int i = 0;i<7;i++)//defining loop to calculating the Average of the  

  {

     highAvg += temperatures[i][0];//holding highest value

     lowAvg += temperatures[i][1];//holding lowAvg value

  }

  cout<<"Average high temperature = "<<highAvg/7<<endl;//calculate amd print highest temperature Average

  cout<<"Average low temperature = "<<lowAvg/7<<endl;//calculate amd print lowest temperature Average

  return 0;

}

Output:

Please find the attached file.

Explanation:

Solution :

The function code is :

function newPriceTable = UpdatePriceTable(origPriceTable,changePrice, colNum)

newPriceTable = origPriceTable:

newpriceTable(:,colNum) = newPriceTable(:,colNum)+changePrice;

end

UpdatePriceTable ([19.99, 9.99; 14.99, 8.99;], [-1.00, -1.50] , 1)

ans = 18.9900      9.9900

         13.4900      8.9900