Answer:
Pressure Cooking
Explanation:
Pressure cooking is a very old cooking method that’s experienced a recent resurgence thanks to a new generation of cookers that promise a speedy, set-it-and-forget-it path to dinner. These devices, whether electrical or stovetop, are all much safer than those of decades ago (which tended to explode), with mechanisms to prevent them from accumulating too much pressure. If you read the owner’s manual carefully, however, you’ll still find one important precaution to take when cooking under pressure: adding water. Water and pressure cooking go hand in hand. In fact, it’s water that helps generate the high-pressure environment that makes your food cook faster.
Most pressure cooker instructions state a minimum amount of water required for pressure cooking even a tiny amount of food. Inside the tightly sealed pressure cooker, the water is heated and eventually boils into steam. Since the steam cannot escape, it collects above the food. All those trapped water molecules increase the pressure inside the cooker.
An atom of sodium has 11 electrons. Make a sketch of a sodium atom, showing how many electrons it has at each energy level. Infer how reactive sodium atoms are.
SOMEONE HELP ME PLEASE :(. I DONT GET IT :(
According to coulomb's law, in which ionic compound are the attractive forces the strongest?.
Answer:
A cation with a 2+ charge will make a stronger ionic bond than a cation with a 1+ charge. A larger ion makes a weaker ionic bond because of the greater distance between its electrons and the nucleus of the oppositely charged ion.
When unbalanced forces act on an object that is in motion, the object can:
A. change speed, direction, or both.
B. only change direction.
C. only slow down.
D. only speed up.
Answer:
A. change speed, direction, or both
Explanation:
hope this helps. . . <3
good luck! uwu
What causes the electrons to move and form static electricty?
contact between two substances
friction
Moist air
Answer:
Static electricity is the result of an imbalance between negative and positive charges in an object. ... When two materials are in contact, electrons may move from one material to the other, which leaves an excess of positive charge on one material, and an equal negative charge on the other.
Answer: 1) Contact between two substances.
Explanation:
#1 When fuel is running through pipes, there is a lot of contact between the fuel and the pipe.
To avoid explosions, fuel trucks have a metal chain that hangs to the ground to discharge the static. When a jet plane is being fueled up, it is first connected to a metal spike that is sunk down into the ground.#2 Before, people thought that Static at first was caused by friction, meaning the rubbing (of an object, pause) had something to do with static.
People later on noticed that fuel trucks and jet planes were being filled with fuel.A large static charge built up from the fuel running through the pipes when fuel trucks and jet planes were being filled with fuel.End note: Your welcome. My apologies if I was late, I was trying to find the answer to this question, too, until I got all this information while taking notes from my Physical Science lesson.
The graph below shows the solute concentration inside a paramecium over time. What is happening at the time indicated by the pointer?
Water is moving rapidly into the paramecium by osmosis.
Water is moving rapidly out of the paramecium as the contractile vacuole contracts.
The paramecium is having a meal.
Solutes from the surrounding water are diffusing through the cell membrane, causing the solute concentration inside the paramecium to rise.
The pointer indicated the point at which water is moving rapidly out of the paramecium as the contractile vacuole contracts.
The pointer specifically indicates where the water solute concentration dropped. In order for the solute concentration of the water to drop, more water would have to be added.This means that water from the paramecium moves into the surrounding water as the contractile vacuole contracts. Consequently, the solute concentration of the surrounding solution decreases. When water moves from the solution into the paramecium, the solute concentration increases and this forms a continuous cycle in the graph.More on water movement by osmosis can be found here: https://brainly.com/question/21395644?referrer=searchResults
if your going down a hill what type of energy are you making?
Answer:
Gravitational potential energy - into Kinetic energy
Explanation:
Protons
Charge:
Mass:
Location:
Role in the atom:
Answer:
Protons are positively charged. The mass is slightly lower than a neutron.The location of a proton is nucleus. The the role of a proton is to help bind the nucleus together.
Explanation:
18 You are studying the boiling points of liquids with some fellow students You have two liquids of different molecular weights, and you test each of them twiceYou find that the one with a lower molecular weight also has a lower boiling point would like to be more confident with the patter you are noticing What are two possible next steps? In one to two sentencesgive specific, different examples of how the experiment could be extended assessed or improved
Answer:
The edge of boiling over of the substance relies upon the strength of holding between the particles, unequivocally the intermolecular powers between the atoms. The intermolecular powers that exist between the particles relies upon the idea of the atoms like extremity, sub-atomic weight, design of the atom, and so forth In testing the edge of boiling over of the two given fluids, the expansion in edge of boiling over can be noticed for the compound with higher limit. This demonstrates that there is lower intermolecular power in the compound with lower atomic weight.
Explanation:
Hope this helps
The strength of holding between the particles, namely the intermolecular forces between the atoms, determines the substance's edge of boiling over. The intermolecular forces between the particles depend on concepts related to atoms, such as extremities, sub-atomic weight, atom design, and so on.
What is an atom ?Each atom is made up of a nucleus and one or more electrons that are linked to it. One or more protons and a significant number of neutrons make up the nucleus. Only the most prevalent type of hydrogen is neutron-free. Atoms that are neutral or ionized make up every solid, liquid, gas, and form of plasma.
But when it comes to the name atom, we must travel back to 400 B.C. ancient Greece. The Greek word atomos, which meaning "uncuttable," was proposed by Democritus, a renowned philosopher. In the end, all matter could be reduced to distinct, tiny particles, or atomos, he said.
When the two supplied fluids' edges of boiling over are tested, the compound with the greater limit exhibits an expansion in the edge of boiling over. This illustrates that the compound with a lower atomic weight has a lower intermolecular power.
Thus,The intermolecular forces between the particles depend on concepts related to atoms.
To learn more about an atom, follow the link;
https://brainly.com/question/29695801
#SPJ5
In which process do particles move closer together but remain in motion?
А condensation
B
diffusion
с
evaporation
D
freezing
Answer: c
Explanation: the particles stay together but has some gain more heat they break apart.
8. Why are we focusing on high levels of ozone in the troposphere in this lab while in Lab 2 (Stratospheric Ozone) we focused on low concentrations of ozone in the stratosphere?
Answer:
f4
Explanation:
your welcome.
bonding and kinetic energy quick check
1. The internal energy within a system associated with the motion of particles and that can be added to a substance is called (1 point)
o temperature
O kinetic energy
O thermal energy
O electrostatic forces
2. which statement describes the effect of adding more energy to a system, assuming a phase change does not occur?
0 the particles within the system will have greater motion and the temperature will increase
0 the particles within the system will have greater motion and the temperature will be grace
0 particles within the system will have less motion and the temperature will increase
0 the particles within the system will have less motion and the temperature will decrease
3. which statement correctly describes how a tractions that holds particles break
0 attractions occur due to gravitational forces when particles move fast enough these forces can no longer keep particles together
0 attractions due to Electrostatic forces when particles move fast enough these forces can no longer keep particles together
0 attractions due to electrostatic forces when particles have low enough energy these forces can no longer keep particles together
0 attractions occurred due to gravitational forces when particles have low enough energy these forces can no longer keep particles together
4. Which statement explains why a rubber band analogy is not a perfect comprehension for Bonds in a substance when considering phases change
0 for a phase change from solid to liquid the bonds do not break completely and particles can still slide past each other
0 for a phase change from liquid to gas the bonds do not break completely the particles can still slide past each other
0 for a phase change from liquid to gas the bonds break completely and of particles can independently of each other
0 phase change from solid to liquid the bond breaks completely particles can move independently of each other
5.the boiling point of benzene is 80°C. which pair of samples will have the same average kinetic energy of benzene molecules?
0 two samples of gaseous benzene, at 80°C and the other 90°C
0 two samples of liquid benzene, one at 70°C and the other at 80°
0 a sample of liquid benzene at 70°C and a sample of gaseous benzene at 90°C
0 a sample of liquid benzene at 80°C and a sample of gaseous benzene at 80°celectric
When energy is added to a system during phase change, the particles move faster.
When a substance is heated, the internal energy within a system associated with the motion of particles and that can be added to a substance is called thermal energy.
During a phase change, when more energy is added to the system, the particles within the system will have greater motion and the temperature will increase.
The attractions that hold molecules together are electrostatic forces. The correct statement about the attractions that hold particles is that attractions between particles break when attractions due to Electrostatic forces when particles move fast enough these forces can no longer keep particles together.
Rubber band is not a perfect comprehension for Bonds in a substance when considering phases change because for a phase change from liquid to gas the bonds do not break completely the particles can still slide past each other.
The pair of samples that will have the same average kinetic energy of benzene molecules is a sample of liquid benzene at 80°C and a sample of gaseous benzene at 80°C.
Learn more: https://brainly.com/question/671212
what class of small objects have orbits completely between the gas giants, occasionally crossing their paths?
The class of small objects with orbits completely between the gas giants is centaurs.
Centaurs are a class of small tiny bodies that circles the Sun amid Jupiter as well as the Neptune, crossing the orbits of one or more of the giant planets. It has a semi-major axis, also known as perihelion, between that the outer planets.
Centaurs' orbits are often unstable since they have crossed the orbits of more than one of the gas giant planets. They are known to have the properties of asteroids and comets.
Learn more about celestial bodies here:
https://brainly.com/question/16141419?referrer=searchResults
2. What mass of water absorbs 6700 J of heat to raise the temperature from 283K to 318K?
Answer:
Q = mcT ...you can either substitute the molar heat capacity of water in the place of c or the specific heat capacity of water.
Explanation:
how to clean garbage disposal with baking soda and vinegar
How many mL of 0.100 M NaCl would be required to make a 0.0365 M solution of NaCl when diluted to 150.0 mL with water?
Answer:
54.75 mL
Explanation:
First calculate the number of moles of NaCl in the 150mL solution of NaCl
0.0365 moles should be present on 1000cm3 or 1dm3 of water.
1L = 1 dm3
1 mL = 1 / 1000 dm3
150 mL = 150/1000 dm3 = 0.15 dm3
If x moles are present in 0.15 dm3,
x/ 0.15 = 0.0365
We get x= 0.0365 × 0.15 mol
Now x amount of moles should be taken from the initial 0.100 M NaCl solution
So 0.1 moldm-3 = 0.0365× 0.15 mol / V
we get V = 0.05475 dm3
V= 0.05475 L
V= 54.75 mL
What is the charge for H before electron share?
An H atom is made up of a nucleus with a +1 charge, as well as a single electron. Therefore, the only positively charged ion possible has charge +1.
I hope this helps!
Which is the stereochemical relationship between this pair of molecules?.
Answer:
enantiomers
Explanation:
hope this helps :)
brainliest plzz
How many grams of acetic acid are present in 250g of vinegar that contains 5.00% acetic acid?
Which statement is always true when nuclear fusion occurs?.
Answer:
The combined number of protons and neutrons remains constant.
Explanation:
= )
I made a really helpful study set for this assignment on Quizlet. Feel free to visit the following if you need help with the rest of this assignment. Thanks and good luck!
Quizlet - "Physical Science - 5.4 Modeling Fusion and Fission Quick Check"
h t t p s : / / q u i z l e t . c o m / 7 3 7 5 5 3 6 8 0 / p h y s i c a l - s c i e n c e - 5 4 - m o d e l i n g - f u s i o n - a n d - f i s s i o n - q u i c k - c h e c k - f l a s h - c a r d s / ? n e w
How many molecules of N 2 are produced by reacting 0.0024 grams of NaN 3 according to the equation: 3 CuCl(aq) 3 NaN 3(aq) ---> Cu 3N(s) 3 NaCl(aq) 4 N 2(g)
Answer:
4 molecules
Explanation:
In the products side of the equation, you see 4N2, this means there are 4 molecules of N2 that are produced by the reaction.
WILL MARK BRAINLIEST
Georgia completed an investigation about different forces and came up with an explanation. What does she need to support her explanation?
Problem
Conclusion
Question
Evidence
Georgia needs evidence
Nitrogen will ____ valence electrons when forming an ionic bond.
A student conducts an experiment to separate water into hydrogen and oxygen through a chemical reaction as shown below.
H Hydrogen gas Orygengu rises in this test tube test tube.
2 H2O --> 2H2 + O2
As a result the student collects 28.0 g of hydrogen and 224.0 g of oxygen. How many grams of water did the student originally start with?
The amount, in grams, of water, that the student originally started with would be 252 g
From the balanced equation of the reaction, the ratio of H2O to H2 is 1:1. Thus for every 1 mole of water that is separated, 1 mole of H2 is produced.
Recall that: mole = mass/molar mass
Mole of 28.0 g H2 produced = 28/2
= 14 moles
Equivalent mole of H2O would, therefore, be 14 moles.
Mass of 14 moles H2O = mole x molar mass
= 14 x 18
= 252 g
More on stoichiometric calculation can be found here: https://brainly.com/question/8062886?referrer=searchResults
Someone know the answer for that question
2.8 dm3 of gas X at STP has equal mass with 11.2 dm3 of C2H6 at STP. What is
the number of mole if gas X has 30 grams?
Answer: o.125 moles of gas X with a molar mass of 240
Explanation:
2.8 dm3 of gas X at STP has equal mass with 11.2 dm3 of C2H6 at STP. What is the number of mole if gas X has 30 grams?
the molar volume of any gas at STP is the volume of 1 mole at STP
and is 22.4 L
the C2H6 has a volume of 11.2L at STP so it has 0.5 moles
C2H6 has a molar mass of (2 X 12) +(6 X 1) = 24 + 6 = 30
0,5 moles weighs 15 gm at STP with
so 15 gm at STP with 2.8 L for gas X
PV=nRT
P=1 atm
T =273.2k
V =2.8
R =0.082
n = PV/RT = (1 X 2.8)/(0.082 X 273.2) =0.125 moles of gasX
the weight of gas X is 30 gms
so 30/.125 =240 g/mole = molar mass of gas X
under which conditions do you expect helium gas to deviate most from ideal behavior?
Answer:
Explanation:
[2-0] NC Special Operation
[2] Supervisor
[2-1] Emergency Response
[2-2] Juggernaut
[2-3] Commander
[2-4] Division Director
Describe the difference between accuracy and precision. How do these two concepts relate to the idea of significant digits?
Answer:
Accuracy of a measured value refers to how close a measurement is to the correct value. The uncertainty in a measurement is an estimate of the amount by which the measurement result may differ from this value. Precision of measured values refers to how close the agreement is between repeated measurements.
Explanation:
Draw the alkyne formed when 1,1‑dichloro‑3‑methylbutane is treated with an excess of a strong base such as sodium amide. Omit byproducts. (give the neutralized alkyne product, not the acetylide salt. ).
This problem is asking for the major alkyne product that is formed when 1,1‑dichloro‑3‑methylbutane reacts with sodium amide (NaNH₂) ignoring any byproduct.
Thus, we can firstly say that such reaction of an alkyl halide with a strong base such as sodium amide is able to remove the halogen-based substituents and hence form insaturations in the form of double or triple bonds depending on the degree of substitution.
For instance, if one halogen substituent, then an alkene will be formed; but if two, then an alkyne (like this problem).
In such a way, as shown on the attached figure, the product will be 3-methylbutyne due to the loss of two chlorine substituents.
Learn more:
https://brainly.com/question/9620187https://brainly.com/question/14282000is this correct? ...
Help me please
Will give brainliest
Angle I in the picture below is the angle of...
Select one:
a. refraction.
b. inversion.
c. reflection.
d. incidence.
Angle I in the picture above is the angle of incidence
The angle I and shown can rightly be called the angle of reflection.
According to the laws of reflection, the incident ray, the reflected ray and the normal all lie on the same plane. This gives us the idea that when two angles lie on the same plane as the normal, it may be a case of reflection.On the basis of what has been said above, the angle I and shown can rightly be called the angle of reflection.Finally, from the image, we can clearly see that angle I is the angle of reflection.
Learn more about reflection: https://brainly.com/question/12029226