Answer:
The air is contained at a high pressure in the tube. When it escapes from a small orifice, it suddenly expands. A large amount of its heat is absorbed in the process of expansion resulting in considerable fall in its temperature. This is why the escaping air feels cold.
What is the phase of a 20 gram of crystalline when its temperature is 250 degrees clesius
Explanation:
20÷250 =12.5 and do it by using fourmulaes
A car of mass 1500 kg is moving with a velocity of 72 km/h. When the driver applied brakes, the velocity of the car reached 10 km/h by travelling the distance of 50 m. Calculate the amount of force applied in the car during that time.
Explanation:
friend I have solved it as we know that force = mass *acceleration and by the equations of motion
To solve this, we must be knowing each and every concept related to force and its calculation. Therefore, the amount of force applied in the car during the time is 6000N.
What is fundamental force?Nature is governed by four fundamental or universal forces. All stuff in the universe would disintegrate in the absence of these forces. Any pull or push that causes an item to change its physical condition is referred to as force (in terms of motion or deformity).
Mathematically,
V²-u²=2aS
V=72 km/h=72000/3600=20m/s
u=0m/s
s= 50 m
substituting all the given values in the above equation, we get
20²-0²=2×a×50
a=4m/s²
Force = mass ×acceleration
substituting all the given values in the above equation, we get
1500 kg=mass
Force = 1500 ×4
=6000N
Therefore, the amount of force applied in the car during the time is 6000N.
To know more about fundamental force, here:
https://brainly.com/question/14524583
#SPJ2
PLease help with this this is pretty hard for me i kinda get it but not fully
Explanation:
Force = mass x acceleration
F= ma (formula)
15N = o.5kg x a
Divide both sides by o.5
a = 30 (greater acceleration)
15N = 4.5kg x a
Divide both sides by 4.5
a= 3.33 (great acceleration)
15N = 0.05kg x a
Divide both sides by 0.05
a = 300 (greatest acceleration)
How can biomass energy use improve water quality? a. the combustion of biomass material to produce energy improves water quality by filtering out pollutants. b. biomass energy use does not require water, which reduces the impact of other energy producing technologies on water quality. c. soil erosion and sedimentation are decreased during biomass crop growth. d. all of the above please select the best answer from the choices provided a b c d
The biomass energy can use improve water quality in soil erosion and sedimentation are decreased during biomass crop growth. The correct option is C.
What is biomass energy?Biomass energy is obtained by the processing of the dead plants and animal or vegetable, cow dung or wood.
The biomass energy obtained by these bio things, it is enriched with the nutrients required by the new crop plants to grow effectively.
The biomass energy provides good water quality by soil erosion and sedimentation.
Thus, The correct option is C.
Learn more about biomass energy.
https://brainly.com/question/2292559
#SPJ1
2 red and 2 blue overlapping balls in the center are surrounded by a green, fuzzy, circular cloud with a white line running through it. 2 green balls sit on the white line, and a line leading a bracket around the balls is labeled a. a line leading to a bracket overlapping the white line is labeled b. which is a characteristic of the part of the atom marked "b"? it is very dense. it has a large mass. it is negatively charged. it is where neutrons move.
The line leading a bracket around the balls, labeled A, represents the nucleus of the atom.
What is nucleus?The nucleus constructs the major part of the atom where all the mass of atom is concentrated. The nucleus of the atom lies at the center, where protons and neutrons are placed.
2 red and 2 blue overlapping balls in the center are surrounded by a green, fuzzy, circular cloud with a white line running through it. 2 green balls sit on the white line, and a line leading a bracket around the balls is labeled a. a line leading to a bracket overlapping the white line is labeled b.
The red balls and the two overlapping balls in the center are representing the protons and neutrons.
Thus, the line leading a bracket around the balls, labeled A, represents the nucleus of the atom.
Learn more about nucleus.
https://brainly.com/question/23366064
#SPJ1
what is the most similar to the Sun in luminosity and temperature
Explanation:
At a distance of 4.25 light years, Proxima is the closest-known star to our solar system. Science of the Alpha Centauri system. The two stars that make up Alpha Centauri, Rigil Kentaurus and Toliman, are quite similar to our sun
Which of the following is a common use of infrared light?
O remote control
Otanning lamp
Omicrowave oven
Ostreet light
remote control
Explanation:
A remote control uses light waves just beyond the visible spectrum of light—infrared light waves—to change channels on your TV.
Why is Radiology important in the medical field?
Answer:
Radiology plays a huge role in disease management by giving physicians more options, tools, and techniques for detection and treatment. Diagnostic imaging allows for detailed information about structural or disease-related changes. With the ability to diagnose during the early stages, patients may be saved.
Explanation:
How do you think the ball in pinball will travel? draw a line to trace the path the ball will take after it is launched
The magnetic properties of the ball help to travel in the pin ball.
What is pinball?A Pinball is a steel sphere of diameter 3 cm. It weighs 2.8 ounces. The ball can reach speed upto 90 miles per hour on the traditional steel pinball.
The magnetic properties of the ball help to travel in the pinball , as some machines uses the magnets to trap the ball in certain places on the playfield.
In some of the machines the ceramic pinball is called Powerball.
Pinball move around the table, hitting bumpers and some targets to score the points.
You'll get only three balls to play, when your third ball falls down then your game will be over.
So, the ball in the pinball will travel because of then magnetic properties of ball.
For more pinball content visit here
https://brainly.com/question/27458951
#SPJ1
Which of the following statements does NOT accurately describe the Berlin Airlift?
The Berlin Airlift is best described as the aircraft used to delivered needed food and supplies to the city of Berlin through the air because all other routes were blocked by the Soviet Union.
What is Berlin Airlift?The Berlin airlift was a 1940s military operation that supplied West Berlin with food and other vital goods by air after the Soviet Union blockaded the city.
Thus, the Berlin Airlift is best described as the aircraft used to delivered needed food and supplies to the city of Berlin through the air because all other routes were blocked by the Soviet Union.
Learn more about Berlin Airlift here: https://brainly.com/question/1104371
#SPJ1
Write a hypothesis about the effects of magnetic and electric fields. Use the format of "if . . . then . . . because . . ." and be sure to answer the lesson question: "How can magnetic and electric fields be demonstrated?"
If the charged particle moves in the magnetic field or electric field, then it experiences magnetic force or electric force because of its magnetic or electric properties.
What is magnetic field?The magnetic field is the region of space where a charged object experiences magnetic force when it is moving.
When a charged particle such as an electron or proton moves inside a conductor, magnetic lines of force rotate around the particle. This relative motion causes the magnetic field to generate.
Thus, If the charged particle moves in the magnetic field or electric field, then it experiences magnetic force or electric force because of its magnetic or electric properties.
Learn more about magnetic field.
https://brainly.com/question/14848188
#SPJ1
Answer:
If a magnetic or electric field is present, materials that generate these fields will interact by attracting or repelling each other because of their magnetic or electric properties.
Explanation:
what is the direction of the magnetic force on the charge
Answer: A
Explanation:
You decide to hike up Mt. Everest so you can experience what it is like to be above roughly 75% of the air in the atmosphere. If the pressure at the surface is 1000 mb, what is the most reasonable approximation of the pressure at the summit (top of the mountain)?
You decide to hike up Mt. Everest so you can experience what it is like to be above roughly 75% of the air in the atmosphere, the pressure at the summit is mathematically given as
P= 250mb
What is the most reasonable approximation of the pressure at the summit (top of the mountain)?Generally, the equation for pressure at the summit is mathematically given as
P= (100-75) * pressure at the surface
Therefore
P= (25/100) x 1000
P= (0.25 x 1000)mb
P= 250mb
In conclusion, the pressure at the summit
P= 250mb
Read more about Pressure
https://brainly.com/question/25688500
#SPJ1
Superguy is flying at treetop level near Paris when he sees the Eiffel Tower elevator start to fall (the cable snapped). His x-ray vision tells him Lois LaTour is inside. If Superguy is 1.00 km away from the tower, and the elevator falls from a height of 240 m, how long does Superguy have to save Lois, and what must be his average speed
If the elevator falls from a height of 240 meters and Superguy is 1 km away, he will have 6.5 seconds to save Lois, which means that his average speed must be 150 meters per second.
What is the average speed?The total distance traveled by an object divided by the total time taken is the average speed.
The average speed of an object indicates the pace at which it will traverse a distance. The metric unit of speed is the meter per second.
Given data:
Distance of super guy from the tower = 1.00 km
height(h)= 240 m
From the Newtons' second equation of motion:
[tex]\rm S= ut+\frac{1}{2} at^2 \\\\\ 210 = 0+\frac{10}{2} t^2 \\\\ t= \sqrt 42\\\\t=6.5 \ sec[/tex]
Distance is the foundation as the product the velocity and time;
D=ut
u=d/t
u=1000/t
u=1000/6.5
u=150 m/sec
Hence, he will have 6.5 seconds to save Lois, which means that his average speed must be 150 meters per second.
To learn more about the average speed, refer to the link;
https://brainly.com/question/12322912
#SPJ1
Answer
A)
B
C
please
Answer:
a is b is c isExplanation:
brash this so hard
How can water cause the loss
of soil from bare farm fields on slopes?
How can this erosion be prevented?
Answer:
Soil erosion by water occurs when bare-sloped soil surface is exposed to rainfall, and the rainfall intensity exceeds the rate of soil intake, or infiltration rate, leading to soil-surface runoff.
Explanation:
Surface cover and runoff. Surface cover is a major factor to control erosion because it reduces the impact of raindrops falling on bare soils and wind removing soil particles. It also reduces the speed of water flowing over the land. Erosion risk is significantly reduced when there is more than 30% soil cover.
Answer:
by natural process of flood
by blasting of dam
increasing the water level
which of the following is composed of only one kind of atom?
Answer:
An element is a pure substance and is made of only one type of atom; it cannot be broken down into a simpler substance.
the conclusion of neutralization reaction
neutralization reactions occur when you combine two extremely reactive substances together for the purpose of rendering them inactive, or neutral.
A crate is moved across a frictionless floor by a rope THAT is inclined 30 degrees above horizontal. The tension in the rope is 50 N. How much work is done in moving the crate 10 meters?
Only the horizontal component of the tension force is performing work on the crate. This component has magnitude (50 N) cos(30°) = 25√3 N, so the work done is
(25√3 N) (10 m) = 250√3 N•m ≈ 433 J
Anna pushes a box with a force of 8.00 newtons. she generates a power of 3.00 watts. how much time does it take for anna to move the box the distance of 9.72 meters? a. 12.4 seconds b. 20.1 seconds c. 25.9 seconds d. 30.8 seconds e. 35.8 seconds
The time taken for anna to move the box the distance of 9.72 meters is 25.9 seconds. The correct option is c.
What is force?The force is the action of push or pull to move or stop an object.
Anna pushes a box with a force of 8.00 newtons. she generates a power of 3.00 watts.
Force is related to power by the relation
Force = Power / Velocity
Put the values, we get
8 = 3/V
V = 0.375 m/s
Velocity is defined as the ratio of distance and the time taken.
The box is moved by the distance of 9.72 meters. So, time taken is
V = d/t
0.375 = 9.72/t
t =25.9 seconds.
Thus, time taken for anna to move the box the distance of 9.72 meters is 25.9 seconds.
Learn more about force.
https://brainly.com/question/21763
#SPJ1
A 5000kva 230/13. 8kv single phase power transformer has a resistance of 0. 38 ohms and reactance of 1. 9 ohms
The reactance of the circuit will be 5.233×10⁻⁴ ohm. Inductive reactance is the product of 2 times π frequency and the coil inductance.
What is reactance?
When alternating electricity passes through pure reactance, it causes a voltage drop that is 90 degrees out of phase with the current.
The letter “X” is used to represent reactance in mathematics, and it is measured in ohms.
The inductive reactance of a coil is calculated using the following formula:
Inductive reactance, or XL, is the product of 2 times p (pi), and the frequency of the ac current in hertz, and the coil inductance in henries.
XL= 2πfL
Where,
f {frequency)
L (Inductance)
The reactance of the circuit is found as;
[tex]\rm R_{new}=0.38[{(\frac{1}{60} )^2][/tex]
[tex]\rm R_{new}=1.055 \times 10^{-4} \ ohm[/tex]
The inductance of the circuit is;
[tex]\rm X_{new}=1.9(\frac{1}{60} )^2\\\\X_{new}= 5.233 \times 10^{-4}\ ohm[/tex]
Hence, the reactance of the circuit will be 5.233×10⁻⁴ ohm.
To learn more about the reactance, refer to the link;
https://brainly.com/question/17129912
#SPJ4
Which set-up has the stronger magnetic field?
Answer:
set-up X
Explanation:
Assuming that both nails are iron and the charge of the battery is the same, set-up X has a stronger magnetic field.
The more coils [turns] made around a nail, the stronger the electromagnet / magnetic field will be because each coil/loop essentially sets up its own magnetic field.
Hope this helps!!
What Is meant By MA of a machine is 2?
Answer:
See below ~
Explanation:
The Mechanical Advantage (MA) is defined as the ratio between the force produced by the machine to the force applied to it.
=============================================================
So,
⇒ [tex]\frac{F(out)}{F(in)} = 2[/tex]
⇒ This means that the force produced is twice the applied force
An electronic defibrillator used on heart attack victims works by delivering charge stored in a capacitor. If the device utilizes a
The energy stored in the capacitor at given capacitance and voltage is determined as 396.5 J.
Energy stored in the capacitorThe energy stored in the capacitor is calculated as follows;
E = ¹/₂CV²
where;
V is the voltage
E = ¹/₂ x 13 x 10⁻⁶ x (7.81 x 10³)²
C is the capacitanceV is the voltageE = ¹/₂ x 13 x 10⁻⁶ x (7.81 x 10³)²
E = 396.5 J
Thus, the energy stored in the capacitor at given capacitance and voltage is determined as 396.5 J.
The complete question is below
An electronic defibrillator used on heart attack victims works by delivering charge stored in a capacitor. If the device utilizes a 13.0 μF capacitor charged to 7.81 × 103 V, what is the energy stored in the capacitor?
Learn more about capacitor here: https://brainly.com/question/13578522
#SPJ4
The diagram shows a simple circuit. Which change would cause the light-bulb to get brighter?
A) Increase the length of the wire between the switch and the battery.
B) Decrease the length of the wire between the switch and the battery.
C) Reverse the direction of the battery.
D) Swap the positions of the lightbulb and the switch.
The correct option is B. Decrease the length of the wire between the switch and the battery.
Resistivity of wire
The resistivity of a wire is the measure of the opposition to the flow of current offered by the wire.
ρ = RA/L
RA = ρL
R = ρL/A
where;
ρ is resistivity of the wireR is resistance of the wireL is lengthA is areaDecrease in length of the wire will cause a decrease in the resistance of the wire, and it will increase the current flowing in the wire, causing the bulb to glow brighter.
Learn more about resistance of wire here: https://brainly.com/question/2908881
#SPJ1
g) If two cars A and B are moving with velocity 60 km/hr and 80 km/hr respectively in the same direction. What will be the relative velocity of B with respect to A? (20 kmhr)
Explanation:
Here,
Velocity of A=60km/hr
Velocity of B=80km/hr
Now,
Relative velocity of B with respect to A in the same direction=Velocity of B - Velocity of A
=80km/hr-60km/hr
=20km/hr
Answer:
20Km / hr
Explanation:
Here
velocity car A=60km/hr
velocity car A=60km/hrvelocity car B=80km/hr
Now
Relative velocity of B with respect to A in the same direction =velocity of B - velocity of A
= 80Km/hr - 60Km/hr
=20km/hr Ans
In dc electrode positive, how much power is at the work clamp?.
Answer:
1/3 power
Explanation:
I'm just a smart guy
Gravity and magnetism are both
A common forces
B natural cycles
C states of matter
D forms of energy
Answer:
Explanation:
Comment
You have to read this carefully enough that you don't mix up energy and forces.
Gravity is a force. If you don't believe me try jumping off a building. Which way are you going to go and why? Down because gravity attracts your mass.
So Magnetism must be a force as well. It acts in one direction, but not a specific one the way gravity acts). It also either attracts or repulses (pushes an object away)
Answer A
A beam of visible light has a frequency of 4.5x10^14 Hz. What is the wavelength of this light? What color is this light?
Answer:
The wavelength is about 666.2 nm.
The color is red.
Explanation:
Recall the relationship between frequency and wavelength:
[tex]\displaystyle c = \lambda \nu[/tex]
Solve for wavelength λ:
[tex]\displaystyle \lambda = \frac{c}{\nu}[/tex]
Substitute and evaluate. Note that 1 Hz = 1 s⁻¹:
[tex]\displaystyle \begin{aligned} \lambda & = \frac{(2.998\times 10^{8} \text{ m/s})}{(4.5\times 10^{14} \text{ /s})} \cdot \frac{1\times 10^9\text{ nm}}{1\text{ m}} \\ \\ & = 666.2 \text{ nm}\end{aligned}[/tex]
Therefore, the wavelength of the light is about 666.2 nm.
This corresponds with the red region of the visible spectrum.
An electric circuit contains an operating heating element and lit lamp. why does the lamp stay lit
In this circuit having an operating heating element and lit lamp, the lamp is going to continue to be lit if the circuit is connected in parallel.
What is an electric circuit?The term electric circuit has to do with the path that current can pass through. In a circuit, there are some components that must be present in the circuit. The question is incomplete, the complete question is shown in the section marked 'missing parts'.
For the lamp in which there is also an operating heating element, the lamp will remain lit only when the circuit is connected in parallel because the potential difference across the components remain the same.
Missing parts:
An electric circuit contains an operating heating element and a lit lamp. Which statement best explains why the lamp remains lit when the heating element is removed from the circuit?
answer choices
The lamp has less resistance than the heating element.
The lamp has more resistance than the heating element
The lamp and heating element were connected in parallel.
The lamp and heating element were connected in series.
Learn more about circuit:https://brainly.com/question/1922668
#SPJ4