Alice and bill throw the ball with same speed [tex]V_{A}[/tex]=[tex]V_{B}[/tex].
What is the speed ?The speed at which an object's location changes in any direction. The distance traveled in relation to the time it took to travel that distance is how speed is defined. Given that it just has a direction and no magnitude, speed is a scalar number.
Okay, so let's imagine that there are two persons, Bob and Alice, standing on the edge of a cliff. We want to know how the speeds compare when the balls strike the ground so that as throws her ball downward at a speed of v and bill throws his ball upward at a speed of v from the same height.
Bill's will therefore rise to this height, strike 0 at that point, and then descend again. When it reaches this height, it will really be moving at the same speed as when it left Bill's hand, just in the opposite direction.
As a result, it will appear as though you tossed it straight down at the same speed, which implies When they both strike the ground, Alice's and Bill's balls will do so at the same pace.
The trajectory of Bill's ball will be symmetrical about this point in terms of the velocity or have the same speed going up as it did coming down or coming down as it did up, if you look at it because there is essentially no air resistance or anything.
To know more about speed visit:
https://brainly.com/question/28224010
#SPJ4
The complete question is:
"Alice and Bill are at the top of a cliff of height H. Both throw a ball with initial speed v0, Alice straight down and Bill straight up. The speeds of the balls when they hit the ground are [tex]V_{A}[/tex] and [tex]V_{B}[/tex]. If there is no air resistance, which is true? A)[tex]V_{A}[/tex] <[tex]V_{B}[/tex] B) [tex]V_{A}[/tex]=[tex]V_{B}[/tex] C) [tex]V_{A}[/tex]>[tex]V_{B}[/tex] D) impossible to tell"
How much force is required
to accelerate a 10 kg mass
upward with a rate of
5 m/s²?
A force is a power that has the ability to alter an object's motion. A force can modify, or accelerate, the velocity of a mass-containing object. Intuitively, pushing or pulling can be used to describe force. As a vector quantity, a force is one that has both magnitude and direction.
The definition of magnitude is simply "distance or quantity." It displays an object's size, direction, or motion in absolute or relative terms. It is employed to indicate the size or scope of something.
The two main categories into which forces can be separated are: Forces in contact. Non-contact forces
A force can be appropriately described as a push or a pull. A force is not something an object "has in it" or that it "contains." One thing experiences a force from another.
F = m * a kgm/s2 in SI base units
F = 10 * 5 = 50 N
To know more about force calculation, click on the link below:
https://brainly.com/question/12785175
#SPJ9
Some students were measuring the volume of a cube shaped wooden block. They
measured the length to be 5.08 cm, the width to be 5.09 cm, and the height to be
5.10 cm. The actual volume of the block was 15.3 cm3
. What was their percent
error?
Answer:
See below
Explanation:
CALCULATED volume from their measurements:
5.08 X 5.09 X 5.10 = 131. 9 cm^3
( I think you my have the "The actual volume of the block was 15.3 cm3" incorrectly posted)
(131.9 - 15.3) / 15.3 x 100 % = 762 % error !!!!!
What energy is there that is conserved in a trebuchet 
There is potential energy that is preserved in a trebuchet.
Describe potential energy.Potential energy is a form of energy that is stored but is dependent on the relative positions of different system components. Stretching or compressing a spring increases its potential energy. A steel ball has more potential energy when it is raised above the surface of the earth than when it is brought to Earth.
potential energy
The counterweight in a trebuchet contains a lot of potential energy because it is quite heavy. Although energy cannot be produced or destroyed, it can take on several forms. The lifted counterweight's potential energy is converted into kinetic energy, or the energy of motion, as it is released and starts to descend.
To know more about potential energy visit :-
https://brainly.com/question/15764612
#SPJ10
a twist of 4 n m is applied to the handle of the screwdriver. resolve this couple moment into a pair of couple forces f exerted on the handle and p exerted on the blade. (10 points)
For nuclear meeting It should be used on a school bus driver's handle. Adapt to the outcome this couple force into a couple moment occurred to be that implies that we must act now to find a better situation.
Open to a nuclear meeting It is intended to be used on a school bus driver's handle. respect the outcome This couple of forces occurred to be in a couple at this time. That suggests that at this moment, we need to discover a better situation and start acting.
And at this time, 400 people are throwing up. Toe in toe is what is known as a couple of forty meters. As the radius of the handle is 30 millimeters in this instance, you can translate it to meters and use the force to draw up on a spot rather four upon it. Are you in favor of addressing this issue? 1 33 nuclear will be Therefore, one till people comprehend that is supposed f.
Now, we must determine a slow speed consent business. Once more, a boardroom mingled. I am. Carletto is a PVR as well. In contrast to the original five meters, Cal critic M is supplied four on a separated radius of five millimeters.
To know more about nuclear click on the link:
https://brainly.com/question/13869748
#SPJ4
A gas occupies 1.56 L at 20 Pa. What will be the volume of this gas if the pressure becomes 40Pa?
Answer:
Hope the picture will help
11) in light of modern solar system theory, why do the orbits of the planets all lie in the same plane? 11) a) the angular momentum of the solar system was kept to a minimum this way.
Because the planets formed from a disk of material that enveloped the Sun during the Solar System's formation, their orbits are coplanar.
Because the planets formed during the formation of the Solar System from a disk of dust that enveloped the Sun, their orbits are coplanar. The planets all formed in a plane because that disk of dust was a disk that was all in a plane.
Astronomy frequently deals with rings and disks. Any initial, minute rotation of the cloud is amplified by the conservation of angular momentum during cloud collapse.
It is the maximum balance between gravitational collapse and the centrifugal force produced by rapid spin as a cloud spins faster and faster before collapsing into a disk. Coplanar planets, the thin disks of spiral galaxies, and the accretion disks of black holes are the end results.
All of the planets are almost in the same plane with some degree of shift because of the spinning of the disc during the early stages of the solar system's formation, when a large disc of matter was revolving around the sun. Due to gravitational forces, the matter gravitated together and planets were formed.
To know more about solar system click on the link:
https://brainly.com/question/18365761
#SPJ4
A negative charge of -200 C and a positive charge of 800 C are separated by 0.3 m. What is the force between the two charges? Is this force attractive or repulsive?
The electric force between the two charges is 1.6 x 10¹⁶ N and it attractive.
What is electric force between the charges?The electric force between the charges is determined by applying Coulomb's law of electrostatic force as shown below.
F = kq₁q₂/r²
where;
r is the distance between the chargesk is coulomb's constantF is the force between the chargesF = (9 x 10⁹ x 200 x 800) / (0.3²)
F = 1.6 x 10¹⁶ N
Thus, the electric force between the two charges is 1.6 x 10¹⁶ N and it attractive.
Learn more about electric force here: https://brainly.com/question/17692887
#SPJ1
in astronomy, it is important to look for trends in your data. based on the average latitude and rotation period of each sunspot, what is the trend for rotation period as it relates to latitude?
A time of "solar maximum" (or "solar max") is when the number of sunspots peaks, whereas a time of "solar minimum" is when they are few (or "solar min").
Every year, a different amount of sunspots are seen on the "surface" of the Sun. This cycle, which has an average duration of about eleven years, explains the rise and decline in sunspots counts. The "Sunspot Cycle" is the term used to describe the cyclical change in sunspot counts that was first observed in 1843 by German amateur astronomer Samuel Heinrich Schwabe. A time of "solar maximum" (or "solar max") is when the number of sunspots peaks, whereas a time of "solar minimum" is when they are few (or "solar min").
A recent sunspot cycle, for instance, lasted from the solar minimum in 1986, when 13 sunspots were observed, to the solar max in 1989, when more than 157 sunspots surfaced, and on to the subsequent solar minimum in 1996 (ten years after the solar minimum in 1986), when the number of sunspots had decreased to less than 9.
Through the course of the sunspot cycle, both the quantity and location of sunspots change. Sunspots typically start to emerge around a latitude of 15° closer to the equator as the solar cycle advances through solar max. Sunspots begin to appear relatively close to the solar equator, at about 7° North and South latitude, as the cycle comes to an end and solar min is once again approaching.
Around solar min, when sunspots of the current cycle are forming at low latitudes and sunspots of the next cycle are starting to form at high latitudes once more, there is frequently an overlap in this latitudinal migration tendency. Spörer's Law is the name given to the progressive equatorward drift of sunspots that occurs throughout the sunspot cycle and was originally observed in the early 1860s by the German astronomer Gustav Spörer and the Englishman Richard Christopher Carrington. Another English astronomer, Edward Walter Maunder, created the first "butterfly diagram" in 1904, which was a pictorial representation of this trend in sunspot migration.
To know more about sunspots click on the link:
https://brainly.com/question/13969679
#SPJ4
According to this graph what is the pressure at 120°K?
Answer:
Approx 50 atm
Explanation:
See graph below:
the lower tank weighs 224 n, and the water in it weighs 897 n. if this tank is on a platform scale, determine the weight that will register on the scale beam.
The weight that will register on the scale beam is 1121 N.
What is the weight of an object?The weight of an object is a measure of the force of gravity acting on a body on the earth's surface.
The weight of an object is calculated as follows:
weight = mass * acceleration due to gravityThe unit of weight is Newtons.
Considering the data given:
The weight of the lower tank is 224 N
The weight of the water in the tank is 897 N
Total weight of the tank and the water = 224 + 897 = 1121 N
This will be the total weight that will register in the scale beam.
Learn more about weight at: https://brainly.com/question/8935213
#SPJ1
Which transition of an electron in the hydrogen atom will result in the absorption of light?.
The hydrogen atom can use the Rydberg equation to determine the energy of light emitted or absorbed. When electrons are raised from a lower energy level to a higher energy level, light is absorbed. When electrons relax from a higher energy level back down to a lower energy level, light is released.
Which hydrogen atom electron transfer will cause light to be emitted?At this moment, the hydrogen atom is excited. The electron soon transitions to a lower orbit because these higher orbits are less stable than the lower ones. Light is produced as a result of this energy release.Absorption. Molecules' electron shells have the potential to interact with photons of light and absorb them. This method involves the Although the photon is destroyed, the molecule that it was absorbed by receives its energy. Electrons are moved from their ground state to higher energy levels using this energy.To learn more about Transition of electron refer to:
https://brainly.com/question/28269146
#SPJ4
at certain times of the year, five planets can be seen from earth, including mars and what other planet?
Mercury, Venus , Mars , Jupiter and Saturn are much seen planets.
What is planets ?
A planets is a body that is in orbit around the sun has sufficient Mars for it's self-gravity to overcome rigid body forces so that it assumes nearly round shape.
In simple words we can say any of the large bodies that revolve around the sun in the solar system called planet.
The current count orbiting our star there are eight planet but earth, mercury, Venus , Jupiter and Mars are much visible .
So,
At certain times of the year these 5 planets can be seen from earth .
To know more about planets click -
https://brainly.com/question/1286910
#SPJ9
a boy pushes a book by applying force of 5 N find the work done by this force as the book is displaced through 20cm while pushing
Answer:
100 Ncm or 1 Nm
How to do:
Given:
Displacement (d): 20cm
Force (F): 5N
Want:
Work: ???
Equation:
W = Fd
Solve:
W = Fd
W = 5N x 20 cm
W = 100 Ncm
If you want it in meters (standard unit), just do unit conversions:
1 cm = 1 m/100 cm
20cm x 1 m/100 cm = 20/100 = 0.2m
W = 5N x 0.2m = 1 Nm
5. A student rolls a marble from a lab bench and then the marble rolls off the table. The table is 91
cm high and the marble lands 50 cm from the table.
a.
What is the minimum horizontal speed the marble needs to achieve this horizontal
distance?
b. What is the vertical velocity of the marble before it hits the ground (vertical impact
velocity)?
I
6. A water bottle has a small hole which in turn causes a small leak. The leaking water shoots out
of the side of the bottle horizontally with a speed of 2 m/s. if the water bottle is held 1.5 meters
from the ground, how far out will the water travel?
The acceleration caused by gravity, or 9.81 m/s², which acts on the object, causes the projectile's vertical velocity to vary.
What is meant by vertical velocity ?A projectile's horizontal velocity is constant (a never changing in value), Gravity causes a downward vertical acceleration with a magnitude of 9.8 m/s/s. A projectile's vertical velocity fluctuates by 9.8 m/s per second, A projectile's vertical motion exists unrelated to its horizontal motion.
The acceleration caused by gravity, or 9.81 m/s², which acts on the object, causes the projectile's vertical velocity to vary. Therefore, this choice is likewise false. As is common knowledge, an object's vertical velocity is not constant, and momentum is a function of velocity.
To learn more about vertical velocity refer to:
https://brainly.com/question/5619273
#SPJ13
Iron has a density of 7.8g/cm³. A solid iron statue has a mass of 877.5g. Work out the volume of the statue
Answer:
112.5 cm
Explanation:
if mddddddbsmsjsixjxx
Answer:
112 cm^3
Explanation:
877.5 g / 7.8 g/cm^3 = 112 cm^3
A body weighs (i) 900N on the surface of earth how much will it weigh on the surface of
Mars whose mass is one ninth and radius is one half that of the earth take g on the surface
of earth to be 10 m/s2
Answer:
400 Newtons or 40 kg
Explanation:
The gravitational force in Newtons of a body of mass mkg on the surface of the earth is given by the equation
[tex]F_e = G\dfrac{mM_e} {r_e^2}[/tex]
where [tex]F_e[/tex] is the magnitude of the gravitational force on earth
m the mass of the object and [tex]M_e[/tex] the mass of the earth and [tex]r_e[/tex] the radius of the earth
G is the universal gravitational constant which is the same throughout the universe
On Mars, the gravitational force for the same object would be:
[tex]F_m = G\dfrac{mM_m} {r_m^2}[/tex]
Since it is given that
[tex]M_m = \dfrac{1}{9}M_e[/tex]
and
[tex]r_m = \dfrac{1}{2}r_e[/tex]
we can rewrite [tex]F_m[/tex] in terms of [tex]F_e[/tex]
[tex]F_m = G\dfrac{m\dfrac{M_{e}}{9}}{\left(\dfrac{r_{e}}{2}\right)^{2}}[/tex]
[tex]\dfrac{4}{9} \;G\dfrac{mM_{e}}{\left(r_{e}\right)^{2}} =\dfrac{4}{9} F_e\\\\= \dfrac{4}{9} \cdot 900 = 400\;N[/tex]
Since F = mg where g = 10 m/s^2
m = F/g = 400N/10m/s² = 40 kg
4 Applications of named material with high specific heat capacity
Water has the highest specific heat capacity.
The specific heat capacity is measured in J/(kg K) or J/(kg °C), and it is the amount of heat (J) absorbed per unit mass (kg) of the material when its temperature rises by 1 K (or 1 °C).
Applications of water with highest specific heat capacity are:
Fomentation: Hot water bottles are employed for this process because, despite producing a lot of heat, the water stays hot for a long period inside the bottle. Water is utilized as a coolant in automobile radiators. It can absorb a lot of heat energy from the car's engine thanks to its high specific heat capacity, but its temperature doesn't get too hot.Bottled Wines: Wine bottles are stored submerged in water in colder areas. The time it takes for the temperature to drop to 0 C is due to the large specific heat capacity of water.To know more about specific heat visit the link:
https://brainly.com/question/11297584?referrer=searchResults
#SPJ1
I’m not sure how to solve this equation but it’s about physics
The values of velocity at point A,C,E and G is 15m/s, the values of velocity at point B, D, F and H is 10m/s, 20m/s, 30m/s and 40m/s respectively.
The projectile is launched from the top of the cliff with a horizontal velocity of 15m/s.
Throughout the motion of the projectile the velocity will have two components. On along vertical and one along horizontal.
Here, the direction of the acceleration is only downwards because only gravity is there and that in only downwards direction.
There is no acceleration in the horizontal direction. So, the velocity in the horizontal direction will never change.
So, the velocity at A,C,E and G is 15m/s throughout the motion.
We know that,
t = √(2h/g)
h = 1/2gt²
Where,
H is height of the cliff at that point,
t is the time,
g is gravity which is equal to 10m/s².
So, the height at point,
B is 1/2(10)(1)² = 5m
D is 1/2(10)(2)² = 20m
F is 1/2(10)(3)² = 45m
H is 1/2(10)(4)² = 50m.
The vertical velocity can be found by using the formula,
V = √2gh
So, vertical velocity at point,
B is √2(10)(5) = 10m/s.
D is √2(10)(20) = 20m/s.
F is √2(10)(45) = 30m/s.
H is √2(10)(80) = 40m/s.
To know more about Projectile, visit,
https://brainly.com/question/24949996
#SPJ9
a nichrome wire is used as a heating element in a toaster. from the moment the toaster is first turned on to the moment the wire reaches it maximum temperature, the current in the wire drops by 20.0% from its initial value. what is the temperature change in the wire? the temperature coefficient of resistivity for nichrome is 0.000400
The change in temperature of the resistance wire is 500 K.
We need to know about the resistance of conductive material to solve this problem. Resistance can be defined as the ratio of the voltage applied to the current flow It can be written as
R = V / I
where R is resistance, V is voltage and I is current.
From the question above, the given parameters are
I2 = 20% I1
ɑ = 0.0004
Find the final resistance in the same voltage
R2 / R1 = (V2 / I2 )/ (V1 / I1)
R2 / R1 = 0.2 I1 / I1
R2 = 0.2 R1
As we know that the temperature dependence of resistance is
R2 = R1 . ɑ . ΔT
0.2 R1 = R1 . 0.0004 . ΔT
ΔT = 500 K
Find more on resistance at: https://brainly.com/question/17563681
#SPJ4
First To Answer With Correct Answer and Full Reasoning Will Be Marked Brainliest! A student holds a water balloon outside of an open window and lets go. The window is 10 meters above the ground, and the balloon is falling under the acceleration of gravity, which is 9.8 m/s2. There are two equations that can be used to describe its motion over time:
x=x0+v0t+12at^2
v=v0+at
Would the balloon hit the ground before or after 1.0 s of falling? Which equation did you use to decide, and what comparison did you make to determine that it would or would not hit the ground by then?
Use 3–5 sentences to explain your reasoning.
Answer:
x = x0 + v0 t + 1/2 a t^2
The question asks for distance traveled in 1 sec
x0 = 0
v0 = 0
This leaves
x = 1/2 a t^2
x = 1/2 * 9.8 /s^2 * 1 s^2 = 4.9 m
The balloon will fall 4.9 m in the first second.
Why is speed the magnitude of velocity?
Yes, Speed is the magnitude of its velocity.
What is speed?
Speed is a scalar, while velocity is a vector (just a number). A velocity, on the other hand, has both a direction and a magnitude. As previously stated, the magnitude of the velocity is referred to as the speed.
The speed of a moving object is the distance it travels in a given amount of time.
The distance travelled divided by the time gives the average speed of an object in a given time. The speed of an object is defined as the distance travelled per unit of time. When the speed of an object changes, it becomes faster or slower. When the speed of an object increases, this is referred to as acceleration. Deceleration, also known as negative acceleration, occurs when an object slows down as its speed decreases.
To learn more about Speed the given link:
brainly.com/question/28224010
#SPJ10
Jonathan wants to see what will happen when he adds cotton balls, his plastic dinosaur, and a squirt of blue acrylic paint to a bowl of water. After giving it a stir, he notices that the water turns blue, the plastic dinosaur floats on the surface, and the cotton balls sink to the bottom. What does this tell you about his mixture?(15 points plus brainlist thingy)
A: All three substances dissolved in water.
B: The acrylic paint dissolved in water.
C: The cotton balls dissolved in water.
D: The plastic dinosaur dissolved in water.
Answer:B is the answer
Explanation: So the paint change color in liquid it means it dissolved in the water
Explain how the law of conservation of energy applies to a television
Answer:
When we turn on the television, electrical energy changes into light and sound.
3. Which kinematic equation should you use if you are trying to solve for time, but do not know displacement?
The kinematic equation should you use if you are trying to solve for time, but do not know displacement is v[f] = v[o] + at.
What is Kinematics?
Kinematics is the branch of mechanics concerned with the motion of objects without reference to the forces which cause the motion.
Given are the equations of motion.
If the displacement is not given, then we can solve for time using the first equation of motion given by -
v[f] = v[o] + at
In this equation, there is no term involving displacement. We can solve for time as follows -
v[f] = v[o] + at
v[f] - v[o] = at
t = (v[f] - v[o])/a
Therefore, the kinematic equation should you use if you are trying to solve for time, but do not know displacement is v[f] = v[o] + at.
To solve more questions on Kinematic equations, visit the link below-
https://brainly.com/question/28712225
#SPJ1
What 3 factors affect the Gravitational Potential Energy of an object? What are the 3 units?
Gravitational Potential Energy
[tex]U=\text{mgh}[/tex]m: mass
g: gravity
h: height
m: kilogram
g: m/s^2
h: meters
. a high diver steps off a diving platform that is 10 meters above the water. if no air resistance is present, during the fall there will be a decrease in the diver's * 1 point a) gravitational potential energy. b) total mechanical energy. c) kinetic energy d) energy caused by friction force
Option a if no air resistance is present, during the fall there will be a decrease gravitational potential energy in the drives.
Resistance is the characteristic of an electric circuit or a component of an electric circuit that converts electrical energy into thermal energy when an electric current is present in the opposite direction. The current-carrying charged particles that make up the conductors' structure collide with fixed particles during resistance. Resistance is frequently thought of as being confined in objects like lamps, heaters, and resistors where it predominates, despite the fact that it is a property of all circuit components, including connecting wires and electric transmission lines. Resistance is the degree to which a substance obstructs or opposes an electric current. Consider the example of a person battling to go from one stop to another in a crowded market to better understand resistance.
Learn more about resistance here:
https://brainly.com/question/11431009
#SPJ4
Whats a support force
According to the given information A support force that completely balances the weight of an object at rest.
What is an example of support force?The normal force is another name for a support force. With the same amount of power as the book's downward weight, the table pushes up on the book. A support force—the upward force that balances an object's weight on a surface—holds the book steady on the table.
What sources does support force have?Pull force attributed to another item, such as "Pull attributed to Steve." The force here is identical to the push force, but it is directed at the thing that is pulling. Support force resulting from the ground (or from the object's surface): When two solid surfaces come in contact with one another, support force arises.
To know more about Support force visit:
https://brainly.com/question/13743040
#SPJ13
The complete question is -
What is a support force ?
A book of mass 0.4 kg is pushed to the left across a table with a force of 2.4 N. Kinetic friction provides a force of magnitude 0.8 N.
What is the normal force acting on the book? N
If a book of mass 0.4 kg is pushed to the left across a table with a force of 2.4 N. Kinetic friction provides a force of magnitude 0.8 N, then the normal force acting on the book would be 3.92 Newtons.
What is friction?Friction is a type of force that resists or prevents the relative motion of two physical objects when their surfaces come in contact.
As given in the problem If a book of mass 0.4 kg is pushed to the left across a table with a force of 2.4 N. Kinetic friction provides a force of magnitude 0.8 N,
The normal force = m × g
= 0.4 × 9.8
= 3.92 Newtons
Thus, the normal force acting on the book would be 3.92 Newtons.
Learn more about friction here, refer to the link;
brainly.com/question/24186853
#SPJ1
You are sitting on a couch watching TV, and although your little sister can not produce enough force to get you to move over, your dad can. This situation is a metaphor for which of Newton's laws of motion?
The law of acceleration
The law of action-reaction
The law of gravity
The law of motion
The situation provided to us is a metaphor for Newton's first law of motion.
Newton's law of motion consists of three laws for the motion of a body, Where Newton's first law of motion states that An object at rest remains at rest, and an object in motion remains in movement at a steady speed and in a straight line unless acted on by an unequal force. Newton’s first law states that each object will stay at rest or in uniform motion in a straight line unless compelled to alter its state by the action of an outside drive. This tendency to stand up to changes in a state of motion is inertia. On the off chance that all the outside strengths cancel each other out, then there's no net drive acting on the object. In case there's no net constraint acting on the object, at that point the object will keep up a consistent speed.
To know more about newton's law of motion refer to the link https://brainly.com/question/974124?referrer=searchResults.
#SPJ1
blank are scientist who study living things.
Answer:
Biologist >
Explanation:
A biologist is a scientist who examines organisms that are alive.
:)