an unsuccesstul life-historv strategv would be associated with bopulations that: decrease in size over time increase in size over time either decrease or do not change in size over time either increase or do not change in size over time.T/F

Answers

Answer 1

False. An unsuccessful life-history strategy would be associated with populations that decrease in size over time.

Life-history strategies are the ways in which organisms allocate their resources (such as time, energy, and nutrients) to various life-history components, such as reproduction, growth, and survival. Unsuccessful life-history strategies are those that do not result in the long-term survival and reproduction of the organisms following that strategy. Such strategies may result in populations that do not increase in size or even decrease over time.

On the other hand, successful life-history strategies are those that result in the long-term survival and reproduction of the organisms following that strategy. These strategies may result in populations that increase in size over time or at least remain stable.

It is important to note that the success or failure of a life-history strategy depends on the specific environment and conditions in which the organism is living. What may be a successful strategy in one environment may not be successful in another.

Learn more about Population here:

https://brainly.com/question/27936223

#SPJ4


Related Questions

Which of the following is NOT true about
newspaper weather maps?
A. They report the temperature of the area in degrees
Fahrenheit.
B. They let you know how much precipitation to expect.
C. They provide more detail than weather service maps.
D. They tell you about the warm and cold air fronts.

Answers

It’s obviously C since all the rest of the answers make sense except for C.

Can anybody help in number 6? <3​

Answers

Answer:

5.4 will be the weight in illustrate form

stainless steel, tell us about its properties and what should be taken into account when using it?

Answers

It has low maintenance Which is long lasting, and environmentally friendly which means it’s recyclable

A wave has a frequency of 2 Hz. Find its period

Answers

It’s period would be 0.5 seconds or 1/2. I think
T=1/f where f=2Hz => T=1/2 or 0,5 seconds.

An electromagnetic wave has a frequency of 5.0 x 1014 Hz. What is the
wavelength of the wave? Use the equation 2 = and 3.0 x 108 m/s for the
speed of light.
A. 1.7 x 10-8 m
О
B. 6.0 x 1022 m
O C. 6.0 x 10-7 m
O D. 1.7 x 105 m

Answers

Answer:

c

Explanation:

wavelength = speed of light/ frequency

= (3x 10^8 m/s)/(5.0 x 10^14 Hz)

= 6.0 x 10^-7 m

A belt of negligible mass passes between cylinders A and B and is pulled to the right with a force P. Cylinders A and B weigh, respectively, 5 and 20 lb. The shaft of cylinder A is free to slide in a vertical slot and the coefficients of friction between the belt and each of the cylinders are µs = 0.50 and µk = 0.40. For P = 3.6 lb,
Determine:
(a) Whether slipping occurs between the belt and either cylinder,
(b) The angular acceleration of each cylinder.

Answers

Slipping doesn't occur between the belt and cylinder B because the force of static friction is greater than force exerted on cylinder B.

Given the following data:

Mass A = 5 lb to kg = 2.27 kg.

Mass B = 20 lb to kg = 9.02 kg.

Force = 3.6 lb to N = 16.02 Newton.

How to calculate angular acceleration.

In order to calculate the angular acceleration of each cylinder, we would take moment about the two cylinders.

For cylinder A:

[tex]\sum M_G=\sum (M_G)_{eff}\\\\I_A\alpha _A = F_A (0.1)\\\\(\frac{m_Ar^2}{2}) \alpha _A = F_A (0.1)\\\\(\frac{2.27 \times 0.1^2}{2}) \alpha _A = F_A (0.1)\\\\0.1F_A=0.01135\alpha _A\\\\F_A=\frac{0.01135\alpha _A}{0.1} \\\\F_A= 0.1135\alpha _A[/tex]

For cylinder B:

[tex]\sum M_G=\sum (M_G)_{eff}\\\\I_B\alpha _B = F_B (0.2)\\\\(\frac{m_Br^2}{2}) \frac{\alpha _A}{2} = F_B (0.2)\\\\(\frac{9.02 \times 0.1^2}{4}) \alpha _A = F_B (0.2)\\\\0.1F_B=0.02255\alpha _A\\\\F_B=\frac{0.02255\alpha _A}{0.2} \\\\F_B= 0.1128\alpha _A[/tex]

For the belt, we have

[tex]\sum F_A =0\\\\P-F_B-F_A=0\\\\16.02-0.1128\alpha _A-0.1135\alpha _A=0\\\\16.02=0.2263\alpha _A\\\\\alpha _A=\frac{16.02}{0.2263} \\\\\alpha _A=70.79 \;rad/s^2[/tex]

Also, we would determine the angular acceleration of cylinder B:

[tex]0.1\alpha _A=0.2\alpha _B\\\\0.1 \times 70.79 = 0.2\alpha _B\\\\7.079= 0.2\alpha _B\\\\\alpha _B=\frac{7.079}{0.2} \\\\\alpha _B=35.40\;rad/s^2[/tex]

Next, we would calculate the forces acting on the cylinders:

[tex]F_A = 0.1135\alpha _A\\\\F_A = 0.1135 \times 70.79\\\\F_A = 8.04 \;Newton[/tex]

[tex]F_B = P-F_A\\\\F_B = 16.02 - 8.04\\\\F_B = 7.98\;Newton[/tex]

Next, we would determine the force of static friction:

[tex]F_s = \mu_s N = \mu_s m_B g\\\\F_s = 0.50 \times 9.02 \times 9.8\\\\F_s=44.198\;Newton[/tex]

From the above calculation, we can deduce that the force of static friction is greater than force exerted on cylinder B. Therefore, slipping doesn't occur between the belt and cylinder B.

Read more on angular acceleration here: https://brainly.com/question/6860269

g A velocity selector consists of crossed electric and magnetic fields. The electric field has a magnitude of 480 N/C and is in the negative z direction. What should the magnetic field (magnitude and direction) be to select a proton moving in the negative x direction with a velocity of 3.50 cross times 10 to the power of 5 m/s to go un-deflected

Answers

Answer:

B = 1.37 mT

Explanation:

Given that,

The magnitude of the electric field, E = 480 N/C

The speed of the proton, [tex]v=3.50 \times 10^5\ m/s[/tex]

We need to find the magnitude of the magnetic field. In a velocity selector, the electric field is balanced by the magnetic field. So,

[tex]qE=qvB[/tex]

Where

B is the magnetic field

[tex]B=\dfrac{E}{v}\\\\B=\dfrac{480}{3.5\times 10^5}\\\\B=1.37\times 10^{-3}\ T\\\\or\\\\B =1.37\ mT[/tex]

So, the magnetic field is equal to 1.37 mT.

A turntable, with a mass of 1.5 kg and diameter of 20 cm, rotates at 70 rpm on frictionless bearings. Two 540 g blocks fall from above, hit the turntable simultaneously at opposite ends of a diameter, and stick to it.

Required:
What is the turntable's angular speed, in rpm, just after this event?

Answers

Answer:

The turntable's angular speed after the event is 28.687 revolutions per minute.

Explanation:

The system formed by the turntable and the two block are not under the effect of any external force, so we can apply the Principle of Conservation of Angular Momentum, which states that:

[tex]I_{T}\cdot \omega_{o} = (2\cdot r^{2}\cdot m +I_{T})\cdot \omega_{f}[/tex] (1)

Where:

[tex]I_{T}[/tex] - Moment of inertia of the turntable, in kilogram-square meters.

[tex]r[/tex] - Distance of the block regarding the center of the turntable, in meters.

[tex]m[/tex] - Mass of the object, in kilograms.

[tex]\omega_{o}[/tex] - Initial angular speed of the turntable, in radians per second.

[tex]\omega_{f}[/tex] - Final angular speed of the turntable-objects system, in radians per second.

In addition, the momentum of inertia of the turntable is determined by following formula:

[tex]I_{T} = \frac{1}{2}\cdot M\cdot r^{2}[/tex] (2)

Where [tex]M[/tex] is the mass of the turntable, in kilograms.

If we know that [tex]\omega_{o} \approx 7.330\,\frac{rad}{s}[/tex], [tex]M = 1.5\,kg[/tex], [tex]m = 0.54\,kg[/tex] and [tex]r = 0.1\,m[/tex], then the angular speed of the turntable after the event is:

[tex]I_{T} = \frac{1}{2}\cdot M\cdot r^{2}[/tex]

[tex]I_{T} = 7.5\times 10^{-3}\,kg\cdot m^{2}[/tex]

[tex]I_{T}\cdot \omega_{o} = (2\cdot r^{2}\cdot m +I_{T})\cdot \omega_{f}[/tex]

[tex]\omega_{f} = \frac{I_{T}\cdot \omega_{o}}{2\cdot r^{2}\cdot m +I_{T}}[/tex]

[tex]\omega_{T} = 3.004\,\frac{rad}{s}[/tex] ([tex]28.687\,\frac{rev}{min}[/tex])

The turntable's angular speed after the event is 28.687 revolutions per minute.

A student hangs a block from a light string that is attached to a massive pulley of unknown radius R, as shown in the figure. The student allows the block to fall from rest to the floor. Which two of the following sets of data that could be measured or determined should the student use together to determine the final angular velocity of the pulley just before the block hits the floor? Select two answers. Justify your selections.

Answers

Answer:

The mass of the block, the distance of the block above the floor, and the time it takes the block to reach the floor, because these quantities can be used to determine the acceleration of the block.

The radius and the mass of the pulley, because these quantities can be used together to determine the rotational inertia of the pulley.

Explanation:

If the motion starts from rest, the initial angular velocity will be zero and the final angular velocity can be determined with the product of angular acceleration and time of motion of the pulley.

Angular velocity is defined as the change in the angular displacement per change in time of motion. This can be expressed mathematically as follows;

[tex]\omega = \frac{\Delta \theta}{\Delta t} = vr[/tex]

where;

Ф is the angular displacementt is the time of the motionv is the linear velocityr is the radius of the circular path.

In a circular motion that starts from rest and ends with final velocity, the equation is given as;

[tex]\omega_f =\omega_i + \alpha t[/tex]

Where;

[tex]\omega_f[/tex] is the final angular velocity[tex]\omega_i[/tex] is the initial angular velocity[tex]\alpha[/tex] is the angular acceleration

Thus, if the motion starts from rest, the initial angular velocity will be zero and the final angular velocity can be determined with the product of angular acceleration and time of motion of the pulley.

Learn more here: https://brainly.com/question/20432894

Which of the following is true of the
thermocline layer of the ocean?
A. rapidly decreases in temperature
B. warmest and least dense of the ocean layers
C. is the bottom layer of the ocean
D. is the top layer of the ocean

Answers

Answer:

d is trueeeeeeeeeeeeeeeee

Which of the following is an example of heat transfer by conduction?
A. Heat is transferred to the air above a candle flame.
B. Heat is transferred to the soil on a sunny day.
c. Heat is transferred to your hand from a warm cup.
D. Heat is transferred to the air from a warm lightbulb.

Answers

Answer:

option c

Heat is transferred to your hand from a warm cup

conduction is the process of transferring of heat from one material to another when they are in contact

hope it helps

It’s option c.
Conducting need contact

It is almost as if each outer planet is a solar system in its own right.

True or False

Answers

False there are many planets in our solar system
False.... planets like venus / mars is in our solar system

Please help me someone !

Answers

Answer:

The object is moving at constant speed.

Explanation:

The spaces between the dots are equal.

Select all the correct answers.
Which statements about our solar system are false?
Our solar system is made up of the Sun and other objects that orbit the Sun.
The Sun is the only star in our solar system.
Dwarf planets have several other bodies in their path orbiting the Sun just as they do.
The Kuiper Belt is between Uranus and Neptune.
A large number of irregularly shaped comets are located in a vast ring between the orbits of Mars and Jupiter.

Answers

D and E are false.

A, B, and C are true.

Answer:

- Our solar system is made up of the Sun and other objects that orbit the Sun.

- The Sun is the only star in our solar system.

- Dwarf planets have several other bodies in their path orbiting the Sun just as they do.

Explanation:

plato

The steering wheel of a car has a radius of 0.19 m, and the steering wheel of a truck has a radius of 0.25 m. The same force is applied in the same direction to each steering wheel. What is the ratio of the torque produced by this force in the truck to the torque produced in the car

Answers

Answer:

[tex]\frac{T_t}{T_c} = 1.32[/tex]

Explanation:

The torque applied on an object can be calculated by the following formula:

[tex]T = Fr[/tex]

where,

T = Torque

F = Applied Force

r = radius of the wheel

For car wheel:

[tex]T_c = Fr_c\\[/tex]

For truck wheel:

[tex]T_t = Fr_t[/tex]

Dividing both:

[tex]\frac{T_t}{T_c} = \frac{Fr_t}{Fr_c}[/tex]

for the same force applied on both wheels:

[tex]\frac{T_t}{T_c} = \frac{r_t}{r_c} \\[/tex]

where,

rt = radius of the truck steering wheel = 0.25 m

rc = radius of the car steering wheel = 0.19 m

Therefore,

[tex]\frac{T_t}{T_c} = \frac{0.25\ m}{0.19\ m} \\[/tex]

[tex]\frac{T_t}{T_c} = 1.32[/tex]

Fluid mechanics questions and answers​

Answers

Answer:

Fluid mechanics is considered one of the toughest subdisciplines within mechanical and aerospace engineering. It is unique from almost any other field an undergraduate engineer will encounter. It requires viewing physics in a new light, and that's not always an easy jump to make.

Describe the formation of the land, the atmosphere, and the oceans of earth

Answers

Land: Tectonic plate movement under the Earth can create landforms by pushing up mountains and hills. Erosion by water and wind can wear down land and create landforms like valleys and canyons. ... Landforms can exist under water in the form of mountain ranges and basins under the sea.

Atmosphere: (4.6 billion years ago)
As Earth cooled, an atmosphere formed mainly from gases spewed from volcanoes. It included hydrogen sulfide, methane, and ten to 200 times as much carbon dioxide as today's atmosphere. After about half a billion years, Earth's surface cooled and solidified enough for water to collect on it.

Ocean: After the Earth's surface had cooled to a temperature below the boiling point of water, rain began to fall—and continued to fall for centuries. As the water drained into the great hollows in the Earth's surface, the primeval ocean came into existence. The forces of gravity prevented the water from leaving the planet.

Humans impact the Earth in good AND bad ways.

A) True

B) False

Answers

Answer:

True

Explanation:

yes we can see that we are helping animals but we create pollution which is very bad

1.
is the rate that velocity changes
O Acceleration
O
Time
O
Distance
O
Mass

Answers

Answer:

a) acceleration

Explanation:

Acceleration is, by definition, the change of an object's velocity.

On a perfect fall day, you are hovering at low altitude in a hot-air balloon, accelerated neither upward nor downward. The total weight of the balloon, including its load and the hot air in it, is 20,000 N. a. Show that the weight of the displaced air is 20,000 N. b. Show that the volume of the displaced air is 1700 m3 .

Answers

Explanation:

Since the balloon is not accelerating means that the net force on the balloon is zero. This implies that the weight of balloon must be equal to the buoyant force on balloon.

Hence, the buoyant force equals the weight of air displaced by the balloon, also 20,000 N.

Weight of the air displaced = density of air × volume

The density of air at 1 atm pressure and 20º C is 1.2 kg/m³  

the volume V = 20,000/(1.2×9.8) =  1700 m³

Two points on a progressive wave are out of phase by 0.41 rad.
What is this phase difference?
[1 mark]
A 23° [e]
B 47° [e]
C 74° [e]
D 148° [e]

Answers

The phase difference between two points on a progressive wave are out of phase by 0.41 rad is 23°.

What is an equation?

An equation is an expression that shows the relationship between two or more numbers and variables.

The two points on a progressive wave are out of phase by 0.41 rad.

Hence, Phase difference = 0.41 rad

But:

Rad to degree = (rad * 180/π)°

Hence:

0.41 rad = (0.41 rad * 180/π) = 23°

The phase difference between two points on a progressive wave are out of phase by 0.41 rad is 23°.

Find out more on equation at: https://brainly.com/question/2972832

PLEASE HELP NO LINKS NEED HELP FAST
Use the scenario to answer the question.

An astronomer discovers a new galaxy using a telescope. The astronomer wants to investigate how the galaxy is moving relative to the Milky Way galaxy.

In one or two sentences, make a hypothesis about the movement of the galaxy and explain at least one way to test the hypothesis.

Answers

Answer:

The galaxies outside of our own are moving away from us, and the ones that are farthest away are moving the fastest. This means that no matter what galaxy you happen to be in, all the other galaxies are moving away from you

Explanation:

The hypothesis about the movement of the galaxy is that galaxies are moving far from each other continuously.

What is the milky way galaxy?

The milky way galaxy is a galaxy that contains over a hundred billion stars and it also includes our solar system.  Its name describes its appearance when viewed from the earth. All the individual stars in the whole sky are a portion of the Milky Way Galaxy, the term "Milky Way" is because of the band of light.

The astronomer has discovered a new galaxy which means our universe is continuously expanding. This is because the universe encloses everything that exists.

Galaxies are moving in space and since the universe space is continuously expanding so the galaxies continuously move from each other. The farther the galaxy is from the milky way which is an observable part, the faster will be moving the galaxy and the closer the galaxy is to the milky way, the slower will be movement of the galaxy.

Learn more about the milky way galaxy, Here:

https://brainly.com/question/2905713

#SPJ5

A cylindrical diving bell is open at the bottom and closed at the top, and is 5m tall. The bell is open to atmospheric air until it is placed in the water, but the bell remains upright (open end facing down, closed end facing up). The pressure of the air inside the bell will naturally increase by 105 Pa for every 10m of depth the bell descends within the water. Assume the temperature of the air remains constant for this process, and that the air can be approximated as an ideal gas

Required:
a. If the bell is lowered 40 meters below the surface, how many meters of air space are left inside the bell?
b. Explain why water doesn't completely flood the bell as it enters the water V (m).

Answers

Answer:

a)   y = 0.35 m,    b) hydrostatic balance

Explanation:

a)  For this fluid mechanics exercise, let's use that the pressure at a given level is the same, let's set a level on the bell shape.

The pressure inside is

             P_interior = P₀ + ρ g h ’

The pressure outside

             P_exterior = Pₐ + ρ g h

as the point is at the same level the pressures are equal

             P_interior = P_exterior

             P₀ + ρ g h ’= Pₐ + ρ g h

             h ’= (Pₐ- P₀)  + ρ g h  

To calculate P₀ they indicate that the pressure increases 10⁵ Pa for every 10 m, we use a direct rule of proportions or rule of three

            P₀ = 10⁵ (40 + h ’) / 10 = 4 10⁵ + h’ 10⁴

the positive sign is because the water inside the hood also increases the air pressure.

we substitute

             (4 10⁵ + h’ 10⁴) + ρ g h’ = Pₐ + ρ g h

             h’ (ρ g + 10⁴) = Pₐ - 4 10⁵ + ρ h h

           

            h’ (1000 9.8 + 10⁴) = (1 10⁵ -4 10⁵) + 1000 9.8 40

            h' (1.98 10⁴) = -3 105 + 3.92 10⁵

            h’ =  [tex]- \frac{0.92 \ 10^5 }{1.98 \ 10^4 }[/tex]

            h ’= -4.65 m

as the hood is only 5 m high, the free air space is

            Y = 5 - 4.65

             y = 0.35 m

it is very little free space

B) The pressure outside and inside the hood is the same, the water rises inside the hood until the pressures equalize and at this point the force is equal and in the opposite direction, which is why the system is in hydrostatic balance.

an object is acted by force of 22 newtons to the right and a force of 13 newtons to left ​

Answers

Answer:

Explanation:

I'm going to guess that you want the net force.

These two forces are acting in opposite directions. Therefore the forces are subtracted in effect.

F = F1 - F2

F1 = 22N to the right

F2 = 13N to the left

F = 22 - 13 = 9 N to the right.

Specifying the direction is very important. Forces do have directions and you must specify what that is. Otherwise, the question should be marked incorrect.

What is the equation for frequency?
a. number of cycles +unit of time
b. number of cycles - unit of time
c. number of cycles ×unit of time
d. number of cycles/ unit of time ​

Answers

D. Number of cycles/ unit of time

Answer:

d

Explanation:

A rod that is 96.0 cm long is made of glass that has an index of refraction equal to 1.60. The rod has its ends ground to convex spherical surfaces that have radii equal to 8.00 cm and 19.1 cm. An object is in air on the long axis of the rod 19.9 cm from the end that has the 19.1-cm radius.
(a) Find the image distance due to refraction at the 19.1-cm radius surface.
(b) Find the position of the final image due to refraction at both surfaces.
(c) Is the final image real or virtual?

Answers

your answer is B! find the position of the final image due to refraction at both surfaces

Object A is moving due east, while object B is moving due north. They collide and stick together in a completely inelastic collision. Momentum is conserved. Object A has a mass of mA = 16.7 kg and an initial velocity of = 7.26 m/s, due east. Object B, however, has a mass of mB = 29.3 kg and an initial velocity of = 4.39 m/s, due north. Find the (a) magnitude and (b) direction of the total momentum of the two-object system after the collision.

Answers

Answer:

a)  v = 3,843 m / s, b)  46.7º  North- East

Explanation:

Moment is a vector quantity, so one of the best ways to solve this problem is to solve each component separately.

The system is formed by the two vehicles so that the moment is preserved during the crash

Direction to the East    

initial instant. Before the crash

          p₀ = mₐ vₐ₀

final insttne. After the crash

          p_f = (mₐ + m_b) vₓ

         p₀ = p_f

         mₐ vₐ₀ = (mₐ + m_b) vₓ

         vₓ = [tex]\frac{m_a}{m_a + m_b} \ v_{ao}[/tex]

let's calculate

          vₓ = [tex]\frac{16.7}{16.7 + 29.3} \ 7.26[/tex]

          vₓ = 2,636 m / s

direction north

initial   p₀ = m_b v_{bo}

final     p_f = (mₐ + m_b) v_y

          p₀ = p_f

          m_b v_{bo} = (mₐ + m_b) v_y

          v_y = [tex]\frac{m_b}{m_a+m_b} \ v_{bo}[/tex]

let's calculate

          v_y = [tex]\frac{29.3}{16.7 + 29.3} \ 4.39[/tex]

          v_y = 2.796 m / s

the final speed of the two two vehicles is

          v = (2,636 i ^ + 2,796 j ^) m / s

a) the magnitude of the velocity

let's use the Pythagorean theorem

       v = [tex]\sqrt{v_x^2 + v_y^2}[/tex]

      v = [tex]\sqrt{2.636^2 + 2.796^2}[/tex]

      v = 3,843 m / s

b) let's use trigonometry to find the direction

      tan θ = v_y / vₓ

      θ = tan⁻¹ v_y / vₓ

      θ = tan⁻¹ (2,796 / 2,636)

      θ = 46.7º

This direction is 46.7º  North East

A 1.8 kg book has been dropped from the top of the football stadium. Its speed is 4.8 m/s when it is 2.9 m above the ground. How high is the stadium?

Answers

Answer:

the height of the stadium is 4 m

Explanation:

The computation of the height of the stadium is shown below:

but before that total mechanic energy should be determined

E = PE + KE

where

PE = mgh

and, KE = 1 ÷2 mv^2

Now

E = mgh + 1 ÷2 mv^2

= (1.8) (9.8) (2.9) + 1 ÷ 2 (1.8) (4.8)^2

= 71.9J

= 72J

Now the height of the stadium is

TE = mgh

72 = (1.8) × (9.8) × h

So, h = 4 m

Hence, the height of the stadium is 4 m

TIME REMAINING
15:56:15
A plant root is an example of
Type here to search

Answers

Answer:

h

Explanation:

The rollercoaster is near the
bottom of the hill after the first big
drop. Which best describes the
potential and kinetic energy?
A. It has mostly kinetic energy.
B. It has mostly potential energy.
C. The kinetic energy is decreasing.
D. The potential energy is about 50%
and increasing.

Answers

Answer:

A. It has mostly kinetic energy

Explanation:

Kinetic energy refers to movement. Potential energy refers to height. In this case, the big drop just got over. So, when the coaster is at the bottom, it has more kinetic than potential energy . Potential energy is still present but kinetic is more at the bottom.

Other Questions
on which of the following is there a tax incentive in the united states? (i) health insurance purchased through employers (ii) employer contributions for life insurance (iii) rental value on owner-occupied housing (iv) your mortgage Who can you list as a dependent? In The Distinguished Gentleman, Eddie Murphy plays a con man with a similar nameas a long-running Congressman. When the politician dies, Murphy runs for officeusing the politician's name: Jeff Johnson. He's careful not to go on camera but usestaglines in commercials such as "Johnson: The name you trust." He eventuallyachieves a slim victory. How does Murphy's character use voter ignorance to win theelection? (Hint: The answer is only slightly different than the way most politicians usevoter ignorance to win elections.) Is physics science hard? Data collected on the discharge of the Colorado River and the speed are given in the table:Discharge (ft3) Speed1.3 2.32.2 0.995.8 3.511 512 1614 2216 2721 1449 3351 35What is the value of the correlation coefficient and its interpretation? 0.76; There is a strong, positive association between discharge and speed. 0.87; There is a strong, positive association between discharge and speed. 0.76; There is a strong, negative association between discharge and speed. 0.87; There is a strong, negative association between discharge and speed. A box is dragged without acceleration in a straight-line path across a level surface by a force of 100 n. What is the frictional force between the box and the surface?. Fill in the blanks to complete the proofs What is the difference between Scrum kanban and XP? the sales manager at cloud kicks wants to set up a business process where opportunity discounts over 30% need to be approved by the vp of sales. any discounts above 10% need to be approved by the user's manager. the administrator has been tasked with creating an approval process. which are two considerations the administrator needs to review before setting up this approval process? A plumb bob (a mass m hanging on a string) is deflected from the vertical by an angle due to a massive mountain.A) Make an estimate of the mass of Mt. Everest, assuming it has the shape of a cone 3910m high and base of diameter 3910m Assume its mass per unit volume is3000kg/m3.B)Estimate the angle of the plumb bob if it is 5.20km rom the center of Mt. Everest. megan wants to test her assumption on the amount of sleep students are getting. she decides to focus her efforts on examining if students are getting less than eight hours of sleep. what should megan state for the null hypothesis and alternative hypothesis? You are a historian studying the development of the American West. Write an essay exlaining how the Americans settled the West in the late 1800s and how the region changed as a result. Use specific examples to support your main idea. How do you find the duplicate number on a given integer array in Python? Alexa is trying to pick out an outfit for the first day of school. She can choose from 8 pairs of pants, 6 t-shirts, 6 sweaters or hoodies, and 2 pairs of shoes. How many different outfits does Alexa have to choose from? How did the Supreme Court justify the Plessy v. Ferguson decision? nelson manufacturing produces bulky heating systems that are installed in large office buildings. the company wants to avoid paying the high costs associated with shipping their product overseas. what would be the best way for nelson manufacturing to accomplish this? lins family had completed 60% of a trip. they have traveled 30 miles. how many miles is the trip What is the main idea of the death of the author? Whicu would be an important detail to include in a summary of " doctoral student played a big part in first black hole photo" the equation of a line is y equals 4 over 3 x minus 5 over 3. what would be the slope of a line perpendicular to this line?