Answers
Answer:
c and d
Explanation:
mitochondria and vacoule
Answer:
It is actually D and A
Explanation:
I took this assignment before on edge and the guy who said C and D is wrong
Related Questions
Nitrous oxide (N2O), more commonly known as laughing gas, is used as a mild sedatitive during various dental procedures.As a gas, it has a densityof 1.977 x 10-3g/mL.Wheniron is exposed to oxygen it forms rust (Fe2O3), which is a solid and has a density value of 5.25 g/mL.Why are the density values so different among these substances?
a)The metal atoms weigh more than the atoms of the gas.
b)The metal forms metallic bonds which are more greatly affected by gravity, increasing the mass.
c)The metal is a solid, and solids weigh more based on the principles of their states of matter.
d)There are fewer gas particles than solid particles in the same volume.
Answers
Answer:
B.
Explanation:
The metal forms metallic bonds which are more greatly affected by gravity, increasing the mass.
How many milliliters of a 25% (m/v) NaOH solution would contain 75 g of NaOH?
A 19 mL
B) 25 mL
C
33 mL
D
75 mL
E
3.0 x 102 mL
Answers
Answer:
E 3.0 x 10² mL.
Explanation:
Hello there!
In this case, according to the formula for the calculation of the mass-volume percent:
[tex]\% m/V=\frac{m_{solute}}{V_{solution}}*100\%[/tex]
Whereas it is necessary to know the mass of the solute and the volume of the solution. Thus, given the mass of NaOH as the solute, the volume of the solution would be:
[tex]V_{solution}=\frac{m_{solute}}{\% m/V}*100\%[/tex]
Then, by plugging in we obtain:
[tex]V_{solution}=\frac{75g}{25\%}*100\%\\\\V_{solution}=3.0x10^2mL[/tex]
Thus, the answer is E 3.0 x 10² mL.
Best regards!
What is a biome?
Question 1 options:
An area with lots of of rainfall.
An area with the same climate, landscape, plants, and animals.
An area with different temperatures.
A bunch of trees, forests, and rivers.
Answers
Answer:
An area with the same climate, landscape, plants, and animals.
If an equilibrium mixture of the three gases at 600K contains 2.92*10^-2 M COCH(g) and 1.76*10^2 M CO, what is the equilibrium
concentration of Cl2?
Answers
Answer:
C
Explanation:
how do you think a device could change the sound that we hear? Make sure you use vocabulary such as frequency, energy and amplitude
Answers
Answer:
good luck tho
Explanation:
how many ions does magnesium phosphite have? how many of those are anions? please explain thought process.
Answers
Answer:
We can simply refer to the cation in the ionic compound as magnesium. Phosphorus, Pstart text, P, end text, is a group 15 element and therefore forms 3- anions.
Explanation:
Because it is an anion, we add the suffix -ide to its name to get phosphide as the name of the ion.
Why isn't salt water safe for humans to drink?
O A. Salt water has too many water molecules and too few salt molecules.
B. Salt water has too few water molecules and too many salt molecules.
O
C. Salt water contains molecules that are poisonous to humans.
O
D. Salt water contains molecules that are too large for humans to process.
Answers
Answer:
B. Salt water has too few water molecules and too many salt molecules
Explanation:
Seawater is toxic to humans because your body is unable to get rid of the salt that comes from seawater. Your body normally gets rid of excess salt by having the kidneys produce urine, but it needs freshwater to dilute the salt in your body for the kidneys to work properly.
How many significant figures are in the number 420,000 mi?
Answers
Answer:
2
Explanation:
zeros are not considered sig figs
Walking up a flight of stairs and noticing that it gets warmer as you climb
higher is an example of *
5 points
Conduction
Convection
Radiation
Brain damage
Answers
The domain Archaea are unicellular prokaryotes and can be autotrophs or heterotrophs
true or false?
Answers
Answer:
I think its true I dont really know
Explanation:
true
True or False. The scientific method is a rigid process?
Answers
The answer to your question is true
The statement "The scientific method is a rigid process" is false.
What is scientific method ?The method by which scientist search for solutions and answers to their problem and question with the help of procedure is called scientific method.
To learn more about scientific method here.
https://brainly.com/question/7508826
#SPJ3
How many molecules of O2 will be formed from 0.500 grams of KCIO3
Answers
Answer:
3.7 x 10²¹ O₂ molecules
Explanation:
2KClO₃ => 2KCl + 3O₂
given 0.500g KClO₃ => 0.500g/122.55g/mol = 0.0041 mole KClO₃
0.0041 mole KClO₃ => 3/2(0.0041) mole O₂ = 0.0061 mole O₂
0.0061 mole O₂ = 0.0061 mole O₂ x 6.02 x 10²³ molecules O₂/mole O₂
= 3.7 x 10²¹ molecules O₂
If the rate of decomposition of ammonia, NH3, at 1150 K is 2.10 x 10-6 mol/L/s, what is the
rate of production of nitrogen and hydrogen? Given 2NH3 3H2 + N2
Answers
Answer:
3.15 × 10⁻⁶ mol H₂/L.s
1.05 × 10⁻⁶ mol N₂/L.s
Explanation:
Step 1: Write the balanced equation
2 NH₃ ⇒ 3 H₂ + N₂
Step 2: Calculate the rate of production of H₂
The molar ratio of NH₃ to H₂ is 2:3. Given the rate of decomposition of NH₃ is 2.10 × 10⁻⁶ mol/L.s, the rate of production of H₂ is:
2.10 × 10⁻⁶ mol NH₃/L.s × 3 mol H₂/2 mol NH₃ = 3.15 × 10⁻⁶ mol H₂/L.s
Step 3: Calculate the rate of production of N₂
The molar ratio of NH₃ to N₂ is 2:1. Given the rate of decomposition of NH₃ is 2.10 × 10⁻⁶ mol/L.s, the rate of production of N₂ is:
2.10 × 10⁻⁶ mol NH₃/L.s × 1 mol N₂/2 mol NH₃ = 1.05 × 10⁻⁶ mol N₂/L.s
Step 1: When we Write the balanced equation
Then 2 NH₃ ⇒ 3 H₂ + N₂Step 2: Calculate the rate of production of H₂
After that, The molar ratio of NH₃ to H₂ is 2:3. Given the rate of decomposition of NH₃ is 2.10 × 10⁻⁶ mol/L.s, the rate of production of H₂ is:Now 2.10 × 10⁻⁶ mol NH₃/L.s × 3 mol H₂/2 mol NH₃ = 3.15 × 10⁻⁶ mol H₂/L.sStep 3: Calculate the rate of production of N₂
After that, The molar ratio of NH₃ to N₂ is 2:1. Given the rate of decomposition of NH₃ is 2.10 × 10⁻⁶ mol/L.s, the rate of production of N₂ is:Now 2.10 × 10⁻⁶ mol NH₃/L.s × 1 mol N₂/2 mol NH₃ = 1.05 × 10⁻⁶ mol N₂/L.sLearn more about:
https://brainly.com/question/16814930
The local weather station is predicting that a warm front will pass through Charlotte, NC in two days.
How will Charlotte's weather most likely be affected by the passing of a warm front?
A The wind speed will decrease.
B The air pressure will increase.
C the temperature will increase.
D The temperature will decrease.
Answers
Answer:
C the temperature will increase.
WILL GIVE THE BRAINLIEST!!! help me pls
Answers
Answer:
Two of them are solids, one is liquid. Two of them are edible, one is not. One is a mixture, and two are not.
Explanation:
A gas is initially at 20.0 o C. That temperature is
K.
The gas is then heated to 30.0 0 C. That temperature is
K.
The initial pressure of the gas is 1.00 atm. The new pressure of the gas is
atm. (Round to 2 decimal places)
Answers
Answer:
The temperature of the gas is 293.15 K.
The temperature of the gas is 303.15 K.
The new pressure of the gas is 0.97 atm.
Explanation:
You need to add 273.15 to the Celsius temperature to convert from Celsius to Kelvin.
So,
20.0°C + 273.15 = 293.15 K.
30.0°C + 273.15 = 303.15 K.
We can use the following equation to calculate the new pressure:
[tex]P_2 = P_1 *\frac{T_2}{T_1}[/tex]
where:
P1 is the initial pressure P2 is the final pressureT1 is the initial temperatureT2 is the final temperaturePlugging in the values from the problem, we get:
[tex]P_2 = 1.00 atm * \frac{303.15 K }{293.15 K} = 0.97 atm[/tex]
Therefore, the new pressure of the gas is 0.97 atm.
Dominant traits are more common in a population then recessive traits
false
true
Answers
Answer:
No Just because a trait is dominant does not mean that it is present in the population
Explanation:
Help meee??
HNO 3 is an example of Select one :
Triprotic Acid
O Diprotic Acid
O Monoprotic Acid
Tetraprotic Acid
Answers
A neutron is a negatively-charged particle in the atom. true or false
Answers
Answer: true
Explanation:
Which best describes the law of conservation of mass? 0 The coefficients in front of the chemicals in the reactants should be based on the physical state of the products. O Products in the form of gases are not considered a part of the total mass change from reactants to products. O When reactants contain both a solid and a liquid, the solid counts toward the overall mass and the liquid does not. O The mass of the reactants and products is equal and is not dependent on the physical state of the substances.
Answers
Explanation:
pdrias darme la traduccion no te entiendo
How many mL of 0.715 M HCl is required to neutralize 1.25 grams of sodium carbonate? (producing carbonic acid)
I really couldn't find the answer since molarity and volume for sodium carbonate are not given.
I will mark the correct answer with steps as best answer.
Answers
Answer:
34 mL
Explanation:
We'll begin by calculating the number of mole in 1.25 g of sodium carbonate, Na₂CO₃. This can be obtained as follow:
Mass of Na₂CO₃ = 1.25 g
Molar mass of Na₂CO₃ = (23×2) + 12 + (16×3)
= 46 + 12 + 48
= 106 g/mol
Mole of Na₂CO₃ =?
Mole = mass /molar mass
Mole of Na₂CO₃ = 1.25 / 106
Mole of Na₂CO₃ = 0.012 mole
Next, we shall determine the number of mole HCl needed to react with 0.012 mole of Na₂CO₃.
The equation for the reaction is given below:
Na₂CO₃ + 2HCl —> H₂CO₃ + 2NaCl
From the balanced equation above,
1 mole of Na₂CO₃ reacted with 2 moles of HCl.
Therefore, 0.012 mole of Na₂CO₃ will react with = 0.012 × 2 = 0.024 mole of HCl.
Next, we shall determine the volume of HCl required for the reaction. This is illustrated:
Mole of HCl = 0.024 mole
Molarity of HCl = 0.715 M
Volume of HCl =?
Molarity = mole /Volume
0.715 = 0.024 / volume of HCl
Cross multiply
0.715 × volume of HCl = 0.024
Divide both side by 0.715
Volume of HCl = 0.024 / 0.715
Volume of HCl = 0.034 L
Finally, we shall convert 0.034 L to mL
This can be obtained as follow:
1 L = 1000 mL
Therefore,
0.034 L = 0.034 L × 1000 mL / 1 L
0.034 L = 34 mL
Therefore, 34 mL of HCl is needed for the reaction.
The amount of HCl required for counterbalancing 1.25 g of Na2CO3(Sodium Carbonate) would be:
- [tex]34 ml[/tex]
Given that,
Mass of Na2CO3 [tex]= 1.25 g[/tex]
To find the Moles of Na2CO3, we will find the molar mass of Na2CO3,
Molar Mass of or Na2CO3 [tex]= 106 g/mol[/tex]
So,
Moles of Na2CO3 [tex]= mass /molar mass[/tex]
[tex]= 1.25/106[/tex]
[tex]= 0.012 mol[/tex]
To determine the quantity of HCl required to display the reaction with 0.012 mol of Na2CO3
[tex]Na_{2} CO_{2} + 2HCl[/tex] → [tex]H_{2}CO_{3} + 2NaCl[/tex]
While balancing the equation, we know that [tex]0.012[/tex] × [tex]2 = 0.024 mole of HCl[/tex] is necessary to process the reaction.
Now,
As we know,
HCl moles [tex]= 0.024[/tex]
Molarity of HCl [tex]= 0.715 M[/tex]
∵ Quantity of HCl required = Moles/Molarity
[tex]= 0.024 / 0.715[/tex]
[tex]= 0.034 l[/tex] [tex]or 34ml[/tex]
Thus, 34 ml is the correct answer.
Learn more about 'Molarity' here:
brainly.com/question/12127540
Lipids include:
A. fats and water
B. Oils and carbohydrates
C. Waxes and sterols
Answers
Answer: C
waxes and sterols
Explanation:
edge 2021
A compound containing nitrogen and oxygen is decomposed in the laboratory. It produces 24.5 g nitrogen and 70.0 g oxygen. Calculate the empirical formula of the compound.
Answers
Answer:
N2O5
Explanation:
1. Convert to moles
24.5g N * 1mol/14g = 1.75
70.0g * 1mol/16g = 4.375
2. Divide each value by the smallest
1.75/1.75 = 1
4.375/1.75 = 2.5
3. Multiply each by a whole number so that they are both whole numbers
1*2 = 2
2.5*2 = 5
4. These are moles of elements present in the compound
Answer: N2O5
Question: You decompose a compound containing nitrogen and oxygen in the laboratory and produce 24.5 g of nitrogen and 70.0 g of oxygen. Calculate the empirical formula of the compound.
About how many atoms of Mg are present in 24.3 grams of Mg?
5.85 x 1025
4.35 x 1019
c
4.81 X 1024
6.02 x 103
Answers
Answer:
D is the answer i think
Explanation:
Which of the following methods of fossil formation is formed in dry areas due to a lack of moisture?
a
Mummification
b
Casts and molds
c
Amber fossil
d
Carbonization
Answers
The methods of fossil formation in dry areas due to a lack of moisture is mummification. The correct option is a.
What is mummification?Mummification is the process of deliberately drying or embalming flesh to preserve the body after death.
This typically entailed removing moisture from a deceased body and desiccating the flesh and organs with chemicals or natural preservatives such as resin.
Mummification served the purpose of keeping the body intact so that it could be transported to a spiritual afterlife.
The body was stripped, positioned on a slanted table, and washed in natron solution (a naturally occurring salt used both as soap and a preservative).
The brain was extracted from the skull through a hole in the ethmoid bone (the bone separating the nasal cavity from the skull cavity).
Thus, the correct option is A.
For more details regarding mummification, visit:
https://brainly.com/question/899330
#SPJ2
Which sublevels hold valence electrons?
Answers
Answer:
The Periodic Table can be divided into s, d, p, and f sublevel blocks. For elements in the s sublevel block, all valence electrons are found in s orbitals. For elements in the p sublevel block, the highest energy valence electrons are found in p orbitals.
Explanation:
why phenol is more acid than alcohol????
Answers
Answer:
Phenol is more acidic than alcohol due to resonance stabilization of the phenoxide ion.
Calculate the molality of a solution containing 15.0 g of ethylene glycol (C2H6O2) dissolved in 145 g of water.
Answers
Answer:
Molarity=moles of solute/ L of solution
Molality = moles of solute/ kg of solvent
Solute= what is being dissolved
Solvent= what is doing the dissolving
Solution= both together
Explanation:
Example's:
#1. For number one you use the Molarity formula. M= moles of solute/ L of solution.
To find moles of Mg(NO3)2 you divide 95g by its molar mass which is 148.33g so 95/148.33=.6405 moles of Mg(NO3)2. Then plug in what you have. .38M= .6405 moles Mg(NO3)2 / X. Then solve for X using algebra. .6405/.38= 1.686 L of solution. (Volume).
Final Answer: 1.686 L
#2. For number 2 you use the Molality formula. m= moles of solute/ kg of solvent.
First you have to find moles of glucose by taking 267g and dividing it by its molar mass which is 180.56g. 267g/180.56g= 1.532 moles of glucose. Then you have to change L to kg. The easiest way to do this is to look at the density and see that for every 1 ml there is 1 gram. So to take Liters to ml you multiply 1.59 by 1000 and get 1590 ml. So that means you have 1590 grams. then you divide 1590grams by 1000 to get 1.59 Kg of slovent. Then plug in your information into the formula. molality= 1.532 moles of glucose / 1.59 Kg of solvent= .964 molality.
Final answer: .964 mol/Kg
#3. m= moles of solute / Kg of solvent. 0.445 mol solute / 2.07 Kg solvent= .215 Molality
Final Answer: .215 mol/Kg
#4. m= moles of solute / Kg of solvent. take 13.5g and divide it by ethylene glycols molar mass which is 62.068 g. 13.5g / 62.068g= .218 mol. Then you take 135g of water and divide it by 1000 to get Kg. 135/1000=.135 Kg. Then plug in your information. m= .218mol/.135 Kg= 1.615 molality
Final Answer: 1.615 mol/Kg.
What type of intermolecular forces occur between 2 oil molecules?
Answers
Answer:
The three main kinds of intermolecular interactions are dipole-dipole interactions, London dispersion forces, and hydrogen bonds
Explanation:
How many moles are contained in 2.3 liters of a 1.2M solution?
Answers
Answer:
[tex]\boxed {\boxed {\sf 2.76 \ mol}}[/tex]
Explanation:
Molarity is found by dividing the moles of solute by liters of solution.
[tex]molarity = \frac {moles}{liters}[/tex]
We know the molarity is 1.2 M (mol\liter) and there are 2.3 liters of solution. Substitute the known values into the formula.
[tex]1.2 \ mol/liter= \frac {x}{2.3 \ liters}[/tex]
Since we are solving for x, we must isolate the variable. It is being divided by 2.3 and the inverse of division is multiplication. Multiply both sides by 2.3 liters.
[tex]2.3 \ liters *1.2 \ mol/liter= \frac {x}{2.3 \ liters}* 2.3 \ liters\\2.3 *1.2 \ mol= x\\2.76 \ mol =x[/tex]
In a solution with a molarity of 1.2 and 2.3 liters of solution, there are 2.76 moles.