Answer:
A common rule of thumb for budgeting for charitable donations uses the concept of the 50/30/20 split for your budget. The other portion is for your wants: About 30 percent of your budget goes into this category, which might include vacations, gifts, or date nights.
Miranda Inc manufactures two products, Regular and Premium, and
applies overhead on the basis of machine hours. Anticipated
overhead and machine hour time for the upcoming accounting period
are $640,0
Miranda Inc manufactures two products, Regular and Premium, and applies overhead on the basis of machine hours. Anticipated overhead and machine hour time for the upcoming accounting period is $640,000 and 160,000 machine hours, respectively. During the accounting period, the actual overhead cost was $620,000 and the actual machine hours were 155,000.
Calculate the predetermined overhead rate, the total overhead cost applied to each product, and the overhead underapplied or overapplied for the accounting period.
The predetermined overhead rate is used to apply overhead to products and is determined using the following formula: Predetermined Overhead Rate = Estimated Overhead Cost ÷ Estimated Activity Level
Using the given data:
Predetermined Overhead Rate = $640,000 ÷ 160,000 machines hours
Predetermined Overhead Rate = $4 per machine hour
Overhead Cost Applied to Products
The overhead cost applied to each product can be calculated as follows:
Product Regular Premium Total Machine hours 30,000, 125,000, 155,000
Overhead cost applied $120,000, $500,000, $620,000
The overhead cost applied to Regular is $120,000 ($4 × 30,000 machine hours) and the overhead cost applied to Premium is $500,000 ($4 × 125,000 machine hours). The total overhead cost applied to both products is $620,000, which is the actual overhead cost for the accounting period.
The overhead underapplied or overapplied can be calculated as follows:
Actual Overhead Cost − Overhead Cost Applied
Actual Overhead Cost = $620,000
Overhead Cost Applied = $620,000
Overhead Underapplied or Overapplied = $0
The overhead cost applied to products is the same as the actual overhead cost, so there is neither overhead underapplied nor overapplied. Therefore, the amount of overhead cost applied to the products is the actual amount of overhead cost for the accounting period.
To know more about Predetermined Overhead Rate visit:
https://brainly.com/question/29829712
#SPJ11
Which of the following increases the size of the expenditure multiplier?
A. an increase in autonomous spending
B. a decrease in the marginal propensity to consume
C. a decrease in the marginal propensity to import
D. an increase in the marginal income tax rate
E. an increase in investment
The option that increases the size of the expenditure multiplier is an increase in investment. The correct answer is option(e).
The expenditure multiplier refers to the relationship between an initial increase in spending and the resulting increase in national income and consumption. The expenditure multiplier is calculated as the inverse of the marginal propensity to save (MPS), which is the fraction of each additional dollar of income that households save rather than spend. MPS is the difference between disposable income and consumption (DI) divided by DI.
As a result, increasing autonomous spending or reducing the marginal propensity to import will decrease the MPS, resulting in a larger multiplier. In contrast, an increase in the marginal income tax rate, or a decrease in the marginal propensity to consume, will result in a smaller multiplier. An increase in investment results in a larger multiplier since it stimulates spending and encourages economic activity, resulting in a positive economic impact and an increase in national income. Therefore, the correct option that increases the size of the expenditure multiplier is option E. an increase in investment.
To know more about expenditure multiplier refer to:
https://brainly.com/question/28140364
#SPJ11
True/False: a flexible budget is a set of budget relationships that can be adjusted as the budgeted costs change.
A flexible budget is a set of budget relationships that can be adjusted as the budgeted costs change. The statement is true.
Unlike a static budget, which is based on a fixed set of assumptions and does not change regardless of actual outcomes, a flexible budget allows for adjustments based on changes in activity levels or other factors.
A flexible budget is designed to provide a more accurate representation of expected costs and revenues at different levels of activity. It allows for the modification of budgeted amounts to reflect the actual conditions or changes in business operations.
By adjusting the budgeted figures, organizations can better evaluate their performance, make informed decisions, and compare actual results against a more relevant benchmark. The flexibility of a budget helps in aligning financial plans with the dynamic nature of business environments.
Visit here to learn more about flexible budget:
brainly.com/question/25353134
#SPJ11
(a): How much money should you be willing to pay now for a guaranteed $900 per year for 10 years starting next year, at a rate of return of 10% per year? Draw the cash flow diagram. (b) If you to know the equivalent future worth of a $900 investment each year for 10 years, starting 1 year from now. How much money should you be willing to gain at the 10th year. Draw the cash flow diagram.
(a) To calculate the present value of receiving $900 per year for 10 years starting next year at a rate of return of 10% per year, we can use the formula for the present value of an annuity:
PV = C * [(1 - (1 + r)^(-n)) / r]Where:
PV = Present ValueC = Cash flow per periodr = Interest rate per periodn = Number of periodsIn this case:
C = $900r = 10% = 0.10n = 10Plugging these values into the formula:
PV = $900 * [(1 - (1 + 0.10)^(-10)) / 0.10]PV = $900 * [(1 - (1.10)^(-10)) / 0.10]PV = $900 * [(1 - 0.3855) / 0.10]PV = $900 * [0.6145 / 0.10]PV = $900 * 6.145PV = $5,530.50Therefore, you should be willing to pay $5,530.50 now to receive $900 per year for 10 years starting next year, at a rate of return of 10% per year.
Cash flow diagram:
```
Year 0 (Now): -5530.50
Year 1: +900
Year 2: +900
Year 3: +900
...
Year 10: +900
```
(b) To calculate the equivalent future worth of a $900 investment each year for 10 years, starting 1 year from now, we can use the formula for the future value of an annuity:
FV = C * [(1 + r)^n - 1] / rWhere:
FV = Future ValueC = Cash flow per periodr = Interest rate per periodn = Number of periodsIn this case:
C = $900r = 10% = 0.10n = 10Plugging these values into the formula:
FV = $900 * [(1 + 0.10)^10 - 1] / 0.10FV = $900 * [(1.10)^10 - 1] / 0.10FV = $900 * [2.5937 - 1] / 0.10FV = $900 * 1.5937 / 0.10FV = $900 * 15.937FV = $14,343.30Therefore, you should be willing to gain $14,343.30 at the 10th year in exchange for a $900 investment each year for 10 years, starting 1 year from now.
Cash flow diagram:
```
Year 1: -900
Year 2: -900
Year 3: -900
...
Year 9: -900
Year 10: +14343.30
```
Please note that the cash flow diagrams illustrate the cash flows associated with each scenario, with negative values representing payments and positive values representing receipts.
About investmentInvestment is an investment activity, either directly or indirectly, with the hope that in the future the owner of the capital will receive a number of benefits from the results of the investment.
Learn More About investment at brainly.com/question/29547577
#SPJ11
On September 1, a corporation had 100.000 shares of $2 par value common stock, and $1,000,000 of retained eamings. The corporation decides issues a 4-1 shock spit. The general joumal ently to recordatio A. No journal entry B. Retained earnings (debit) and common stock split distribution (credit) C. Retained eamings (debit) and stock split (credit) D. Retained samings (debit) and common stock (credit)
The general journal entry to record it includes: Retained earnings (debit) and common stock split distribution (credit). The Option b.
How should the corporation journal entry be recorded for the stock split distribution?To record the stock split, the corporation would need to make a journal entry. The stock split involves increasing the number of shares and reducing the par value per share.
In this case, the corporation had 100,000 shares of $2 par value common stock. With a 4-1 stock split, the number of shares would increase by four times, resulting in a total of 400,000 shares. The par value per share would be reduced accordingly. The journal entry would involve debiting the retained earnings account and crediting the common stock split distribution account.
Read more about journal entry
brainly.com/question/28390337
#SPJ4
Puget Sound Divers is a company that provides diving services such as underwater ship repairs to clients in the Puget Sound area. The company’s planning budget for May appears below:
Puget Sound Divers Planning Budget for the Month Ended May 31
Budgeted diving-hours (q) : 100
Revenue ($365.00q) : $36,500
Expenses:
Wages and salaries ($8,000 + $125.00q) : 20,500
Supplies ($3.00q) : 300
Equipment rental ($1,800 + $32.00q) : 5,000
Insurance ($3,400) : 3,400
Miscellaneous ($630 + $1.80q) : 810
Total expense : 30,010
Net operating income : $ 6,490
During May, the company’s actual activity was 105 diving-hours.
Required: show all the work process
Using Exhibit 9–5 as your guide, prepare a flexible budget for May.
The flexible budget for May, based on the actual activity of 105 diving-hours, is as follows:
Revenue: $38,325
Expenses:
Wages and salaries: $21,625
Supplies: $315
Equipment rental: $6,440
Insurance: $3,400
Miscellaneous: $866
Total expense: $32,646
Net operating income: $5,679
To prepare the flexible budget for May, we need to adjust the budgeted amounts based on the actual activity level of 105 diving-hours.
Revenue: We multiply the budgeted revenue per diving-hour ($365.00) by the actual diving-hours (105).
Revenue = $365.00 * 105 = $38,325
Expenses: We calculate the expenses using the given formulas and substitute the actual diving-hours (105) into the respective equations.
- Wages and salaries = $8,000 + ($125.00 * 105) = $21,625
- Supplies = $3.00 * 105 = $315
- Equipment rental = $1,800 + ($32.00 * 105) = $6,440
- Insurance remains the same at $3,400
- Miscellaneous = $630 + ($1.80 * 105) = $866
Total expense = Wages and salaries + Supplies + Equipment rental + Insurance + Miscellaneous
Total expense = $21,625 + $315 + $6,440 + $3,400 + $866 = $32,646
Net operating income = Revenue - Total expense
Net operating income = $38,325 - $32,646 = $5,679
The flexible budget for May, based on the actual activity of 105 diving-hours, shows a revenue of $38,325, total expenses of $32,646, and a net operating income of $5,679. This flexible budget takes into account the actual activity level and provides a more accurate financial picture for the month of May.
To know more about Flexible Ratio, visit
https://brainly.com/question/25353134
#SPJ11
select the correct answer. which type of enterprise has ‘unlimited liability’? a. corporation b. public-limited company c. partnership d. private-limited company
The type of enterprise that has unlimited liability is a partnership Therefore the correct option is C.
Partnership is a business entity formed by two or more individuals who contribute money, property, or skills to operate and manage the business. In a partnership, each partner is personally liable for the debts and obligations of the partnership.
This means that in case the partnership cannot pay its debts, creditors can seek payment from each partner's personal assets, which could include personal savings, investments, or properties. It is important for individuals entering a partnership to fully understand and accept this risk before doing business as partners.
Hence the correct option is C
To know more about enterprise visit:
https://brainly.com/question/32634490
#SPJ4
Problem 05-02 (LO2, 3, 5) Large Ltd. purchased 70% of Small Company on January 1, Year 6, for $700,000, when the statement of financial position for Small showed common shares of $470,000 and retained
Problem 05-02 (LO2, 3, 5)Large Ltd. purchased 70% of Small Company on January 1, Year 6, for $700,000, when the statement of financial position for Small showed common shares of $470,000 and retained earnings of $300,000. At the date of acquisition, the fair value of the non-controlling interest was $300,000.
The following financial statements for Large and Small were prepared on December 31, Year 7:Therefore, the entries required to eliminate the investment account are as follows:
Step 1: Elimination of Investment in Small Company. The investment account will be eliminated by debiting it and crediting the equity of Small Company: Large Ltd. will debit its Investment in Small Company account for its $700,000 investment, and Small Company will credit its Common Shares and Retained Earnings account for its common shares and retained earnings balances.
Step 2: Calculate GoodwillWhen the purchase price exceeds the fair value of the net assets acquired, goodwill is created. Goodwill is an intangible asset that represents the value of a company's brand name, customer relationships, and other unique factors. In this situation, the purchase price exceeded the fair value of Small Company's net assets by $200,000 ($700,000 - $470,000 - $300,000), which resulted in goodwill being recorded. We will record goodwill in the worksheet by debiting it and crediting the Non-Controlling Interest account. Large Ltd. will debit Goodwill for $200,000, and Non-Controlling Interest will credit Non-Controlling Interest for $200,000.
Step 3: Elimination of Non-Controlling InterestWe will eliminate the portion of the equity accounts that belongs to the non-controlling interest. The balance of $422,800 in the Non-Controlling Interest account reflects the non-controlling interest's share of the consolidated equity.
To know more about acquisition visit :
https://brainly.com/question/32814375
#SPJ11
Give brief summary of IAS 16 Property, Plant, and Equipment.
Objective
Scope
Recognition
Initial measurement
Measurement subsequent to initial recognition
The revaluation model
Depreciation (cost and revaluation models)
Recoverability of the carrying amount
Derecognition (retirements and disposals)
Disclosure
Additional disclosures
Revalued property, plant and equipment
IAS 16 provides guidance on the recognition, measurement, and disclosure of property, plant, and equipment in financial statements.
What are the key aspects covered by IAS 16 regarding property, plant, and equipment?IAS 16 sets out the objective of providing relevant information about an entity's investment in property, plant, and equipment. It outlines the scope of the standard, which includes tangible assets that are held for use in the production or supply of goods and services, rental to others, or for administrative purposes.The standard specifies the recognition criteria, stating that an item of property, plant, and equipment should be recognized as an asset if it is probable that future economic benefits associated with the asset will flow to the entity, and the cost of the asset can be reliably measured.
IAS 16 provides guidance on the initial measurement of property, plant, and equipment, which is generally at cost. It also allows for the revaluation model, where assets can be carried at fair value less any subsequent accumulated depreciation and impairment losses.
The standard addresses the depreciation of property, plant, and equipment, both under the cost model and the revaluation model. It requires entities to assess the recoverability of the carrying amount of an asset, and if necessary, recognize impairment losses.
IAS 16 includes guidance on derecognition of property, plant, and equipment, such as retirements and disposals, and specifies the disclosure requirements for these assets in the financial statements. Additionally, it outlines additional disclosures for revalued property, plant, and equipment.
Learn more about IAS 16
brainly.com/question/32628155
#SPJ11
A project will reduce costs by $42,700 but increase depreciation by $21,100. What is the operating cash flow if the tax rate is 21 percent? Multiple Choice $28,660 $27,755 $22,330 $41,470 $38,164
Operating Cash Flow = $50,402
How to find the Operating Cash FlowTo calculate the operating cash flow, we need to consider the effect of the cost reduction and the increase in depreciation on the taxable income.
Operating Cash Flow = (Cost Reduction - Tax on Cost Reduction) + (Depreciation Increase - Tax on Depreciation Increase)
Given:
Cost Reduction = $42,700
Depreciation Increase = $21,100
Tax Rate = 21%
Calculating the tax on the cost reduction:
Tax on Cost Reduction = Cost Reduction * Tax Rate
Tax on Cost Reduction = $42,700 * 0.21
Tax on Cost Reduction = $8,967
Calculating the tax on the depreciation increase:
Tax on Depreciation Increase = Depreciation Increase * Tax Rate
Tax on Depreciation Increase = $21,100 * 0.21
Tax on Depreciation Increase = $4,431
Substituting the values into the formula for operating cash flow:
Operating Cash Flow = ($42,700 - $8,967) + ($21,100 - $4,431)
Operating Cash Flow = $33,733 + $16,669
Operating Cash Flow = $50,402
Therefore, the correct answer from the multiple-choice options is $50,402.
Learn more about Cash Flow at https://brainly.com/question/735261
#SPJ4
in economics, if a good is inelastic, consumers have lost an interest in purchasing it. producers have lost an interest in manufacturing it. its supply or demand is too sensitive to price changes.
In economics, if a good is inelastic, its supply or demand is too sensitive to price changes.
Inelastic demand occurs when the percentage change in quantity demanded is less than the percentage change in price, resulting in a less elastic demand curve.
Inelasticity means that when the price of a commodity changes, the quantity demanded or supplied does not change significantly.Inelastic goods have a lower degree of responsiveness to price changes. This means that demand or supply does not fluctuate significantly with changes in price.
Because consumers do not lose interest in purchasing it, the first option is incorrect. The second option, "producers have lost an interest in manufacturing it," is also incorrect because the demand for this product is still there. Therefore, if the good is inelastic demand, its supply or demand is too sensitive to price changes.
To know more about inelastic demand click on below link:
https://brainly.com/question/30103518#
#SPJ11
A random sample of 17 values was selected from a population, and the sample standard deviation was computed to be 150. Based on this sample result, compute a 90% confidence interval estimate for the true population standard deviation.
The population standard deviation is estimated using sample data and is therefore not known. The aim of this question is to construct a confidence interval to estimate the population standard deviation of a normal distribution.
This confidence interval is calculated based on a sample size of n = 17 and a sample standard deviation of 150. In this case, the degrees of freedom is n − 1 = 16.
To construct a 90% confidence interval for the population standard deviation, we use the following formula:
[math] \sqrt{ \frac{(n-1)s^2}{\chi^2_{\frac{\alpha}{2},n-1}}}, \sqrt{ \frac{(n-1)s^2}{\chi^2_{1-\frac{\alpha}{2},n-1}}}[/math]
where s is the sample standard deviation, [math]\chi^2_{\frac{\alpha}{2},n-1}[/math] and [math]\chi^2_{1-\frac{\alpha}{2},n-1}[/math] are the critical values of the chi-squared distribution with n − 1 degrees of freedom corresponding to the lower and upper bounds of the confidence interval, and α is the significance level (1 − confidence level).
Substituting the given values, we get:
[math]\sqrt{\frac{(17-1) \times 150^2}{\chi^2_{0.05/2,16}}} , \sqrt{\frac{(17-1) \times 150^2}{\chi^2_{1-0.05/2,16}}}[/math]
[math]= \sqrt{\frac{16 \times 150^2}{26.2962}}, \sqrt{\frac{16 \times 150^2}{7.9656}}[/math]
[math]= (284.34, 631.85)[/math]
Therefore, we can estimate with 90% confidence that the true population standard deviation lies between 284.34 and 631.85.
To know more about population visit:-
https://brainly.com/question/15889243
#SPJ11
Identify three prominent theories that attempt to
explain the term structure of interest rates.
There are three prominent theories that attempt to explain the term structure of interest rates.
They are as follows: Expectations theory, Liquidity preference theory and Market segmentation theory.
Expectations theory: The Expectations theory is a popular economic theory that is used to describe the yield curve's formation. This theory claims that long-term interest rates are dependent on the average short-term interest rates expected in the future. When the expected average short-term interest rate rises, the long-term interest rates will also increase, according to this theory. When expected average short-term interest rates fall, long-term interest rates decline.
Liquidity preference theory: The liquidity preference theory asserts that investors demand a premium for securities that have longer maturities because they perceive them to be less liquid and riskier. This implies that the yield curve is normally upward sloping because of the higher risk premiums that investors require to hold longer-term debt. The risk premium is the difference between the required return for long-term bonds and the return on short-term bonds.
Market segmentation theory: The Market Segmentation Theory, in contrast to the Expectations and Liquidity Preference theories, assumes that there are many different groups of investors with varying investment horizons, and that each group has a particular preference for a specific segment of the yield curve. Market segmentation theory asserts that various investors want different maturities and have no interest in other maturities. This theory implies that the yield curve's slope is determined by the intersection of the various supply and demand curves for the various maturity segments.
Learn more about interest rates at
https://brainly.com/question/28272078
#SPJ11
Special Rules for High-Income Taxpayers (LO 1.9)
Rachel is single and has wages of $177,350 and dividend income of $106,410. She has no investment expenses.
Calculate the amount of the 3.8 percent net investment income tax she must pay. Round your answer to the nearest whole dollar.
To calculate the amount of the 3.8 percent net investment income tax that Rachel must pay, we need to determine her net investment income and apply the tax rate.
Net Investment Income = Dividend Income
Net Investment Income = $106,410
3.8% Net Investment Income Tax = (Net Investment Income) * (3.8%)
3.8% Net Investment Income Tax = $106,410 * 0.038
3.8% Net Investment Income Tax = $4,046.58
Rounded to the nearest whole dollar, Rachel must pay $4,047 as the 3.8 percent net investment income tax.
This calculation assumes Rachel does not have any other types of investment income or deductions that could affect her net investment income tax liability.
Learn more about net investment income here:
https://brainly.com/question/31490311
#SPJ11
which statement is not true regarding the total variable cost curve? a. the total variable cost curve increases as output increases. b. the total variable cost curve shows the variable costs of production given current factor prices. c. the total variable cost curve is a horizontal line. d. the total variable cost curve starts at the origin.
The statement that is not true regarding the total variable cost curve is "the total variable cost curve is a horizontal line ( option C).
The total variable cost (TVC) curve refers to the graphical representation of the relationship between total variable cost and output in a production process. It is constructed by plotting the total variable cost against the quantity of output. The total variable cost curve can be plotted for a single product or for multiple products produced using similar production techniques. The total variable cost curve is upward sloping, indicating that as output increases, the total variable cost increases.Therefore, the option that is not true regarding the total variable cost curve is c. the total variable cost curve is a horizontal line.
You can learn more about total variable cost curve at
https://brainly.com/question/31478892
#SPJ11
Tyare Corporation had the following inventory balances at the beginning and end of May May 1 May 30 $28,500 $36,000 $78,000 $72,000 $16,500 $16,962 Raw materials Finished Goods Work in Process During
During May, Tyare Corporation's raw materials inventory increased from $28,500 to $36,000, while finished goods inventory decreased from $78,000 to $72,000.
Tyare Organization had the accompanying stock adjusts toward the start and end of May:
May 1: Unrefined substances - $28,500, Completed products - $78,000, Work in process - $16,500
May 30: Unrefined substances - $36,000, Completed products - $72,000, Work in process - $16,962
During the long stretch of May, Tyare Partnership experienced changes in its stock adjusts. The natural substances stock expanded from $28,500 to $36,000, showing that the organization bought extra unrefined components during the month.
The completed merchandise stock diminished from $78,000 to $72,000, recommending that the organization sold a few completed items during the month. The work in process stock remained generally steady, with a slight increment from $16,500 to $16,962.
These stock adjusts give knowledge into the organization's creation and deals exercises during May. By breaking down these figures, Tyare Company can evaluate its stock administration and go with informed choices in regards to creation levels and future deals projections.
To learn more about inventory balances, refer:
https://brainly.com/question/32700542
#SPJ4
bob exchanged a building for another building on april 3, 2022. the adjusted basis of his building was $320,000. he also gave $50,000 cash. he received a building with a fair market value of $450,000. how much gain or loss must he recognize on the exchange?
Bob must recognize a gain of $80,000 on the exchange.
Bob exchanged a building for another building on April 3, 2022. The adjusted basis of his building was $320,000. He also gave $50,000 cash. He received a building with a fair market value of $450,000.
Let us calculate the gain or loss he must recognize on the exchange.Calculation of Bob's gain or loss on the exchange:
Step 1: Compute the total value of assets exchanged.
Building given up:
Adjusted basis = $320,000
Cash given up = $50,000
Total value given up = $320,000 + $50,000 = $370,000
Building received:
Fair market value = $450,000
Step 2: Compute the gain or loss on the exchange by comparing the total value of assets exchanged with the fair market value of assets received.
Gain or loss on the exchange = Fair market value of assets received – Total value of assets given up
= $450,000 – $370,000
= $80,000
Therefore, Bob must recognize a gain of $80,000 on the exchange.
Learn more about assets -
brainly.com/question/27972503
#SPJ11
Embargoes often fail to achieve their political objectives because: Countries that enact embargoes are censored by the World Trade Organization (WTO). O The embargoing nation's politicians end embargoes due to political pressure from their voters. The citizens of affected countries rally in support of national leadership. Embargoes are unable to cause enough economic damage to matter.
Embargoes are a type of political action taken against a country. The primary objective of an embargo is to inflict enough economic damage that the targeted country's government will change its policies.
Embargoes often fail to achieve their political objectives because they are unable to cause enough economic damage to matter.Embargoes can also be ineffective because the citizens of the affected countries rally in support of their national leadership.
The embargoed nation's politicians may also end embargoes due to political pressure from their voters.Countries that enact embargoes are not typically censored by the World Trade Organization (WTO). The WTO's primary function is to ensure that trade between countries is fair and not unduly restricted by tariffs or other trade barriers. However, the WTO does have the power to take action against countries that violate international trade agreements.
Embargoes can be a useful tool in international relations, but they are not always successful. It is important to carefully consider the potential economic and political consequences before enacting an embargo.
Learn more about countries here,
https://brainly.com/question/29607387
#SPJ11
Malcolm ordered 12 widgets from Big Corp, but four widgets arrived damaged. Big Corp doesn’t have any more widgets, so they say they won’t charge for all 12. How does Malcolm record this in QuickBooks?
A As a vendor credit
B As a vendor refund
C As a non-posting entry
D As a partial inventory receipt
Malcolm ordered 12 widgets from Big Corp, but four widgets arrived damaged. Since Big Corp. doesn't have any additional widgets, they say they won't charge for all 12 widgets. The way Malcolm can record this in QuickBooks is by creating a vendor credit (Option A) is correct.
The way Malcolm can record this in QuickBooks is by creating a vendor credit. What is a vendor credit? A vendor credit is a refund that a seller gives a purchaser, usually in the form of a credit to their account, for overpaying or returning goods. If you have to reimburse your supplier for anything, you can use a vendor credit in QuickBooks. You will see a credit applied to the supplier account with this tool, and you can use it against future orders. How does Malcolm record this in QuickBooks?
Therefore, the way Malcolm can record this in QuickBooks is by creating a vendor credit (Option A). This tool helps you to save your company's money and avoid billing mistakes. QuickBooks can also alert you if you overpay or double-pay a vendor, allowing you to catch and correct errors before they become a problem, which is particularly useful when you work with hundreds of vendors.
To know more about vendor refer to:
https://brainly.com/question/14297474
#SPJ11
Do you think shoprite holdings is a good employer yo work for? why do you say that?
In answering the question of whether Shoprite Holdings is a good employer to work for, the response should meet the following criteria: Shoprite Holdings is a South African company that has a significant presence in the retail industry in Africa and is known for its extensive range of products and services, including food, home appliances, and clothing.
The company operates in 15 countries, with over 140,000 employees.The company has won numerous awards and recognition for its human resource policies, including recognition for its work in employee engagement, talent management, and workplace diversity. Additionally, the company provides opportunities for employees to grow and develop their skills, with a strong focus on career progression and skills development.However, the company has also been criticized for its treatment of employees, with some accusing it of exploiting workers and failing to provide fair wages or working conditions. Despite these criticisms, the company has continued to grow and expand its operations, with plans to enter new markets in the future.
In conclusion, whether Shoprite Holdings is a good employer to work for depends on various factors, including the employee's position, location, and personal experience. While the company has been recognized for its human resources policies, it has also faced criticism for its treatment of workers. Therefore, it is up to each individual to evaluate the company and decide whether it is a good fit for their career aspirations and personal values.
to know more about retail industry visit:
brainly.com/question/30177017
#SPJ11
The Company manufactures windows. Its manufacturing plant has the capacity to produce 20000 windows each month. Current production and sales are 15000 windows per month. The company normally charges $250 per window. Cost information for the current activity level is as follows:
1. The company should accept the special order.
2. The special order should be rejected.
3. The company should accept the special order.
How did we arrive at these assertions?1. To determine whether the company should accept the special order, compare the incremental revenue from the order with the incremental costs associated with it.
Incremental revenue:
Number of windows in the special order: 5,000
Price per window: $125
Total incremental revenue: 5,000 × $125 = $625,000
Incremental costs:
Direct materials: $300,000
Direct manufacturing labor: $150,000
Variable costs (for setups, materials handling, quality control, etc.) for 100 batches: 100 × $1,250 = $125,000
Total incremental costs: $300,000 + $150,000 + $125,000 = $575,000
Total incremental profit = Incremental revenue - Incremental costs
= $625,000 - $575,000
= $50,000
Since the total incremental profit is positive ($50,000), the company should accept the special order.
2. If the plant capacity is reduced to 17,500 windows per month, we need to consider whether accepting the special order would exceed the available capacity.
Current production and sales: 15,000 windows
Special order quantity: 5,000 windows
Total demand (current + special order): 15,000 + 5,000 = 20,000 windows
Since the total demand (20,000 windows) exceeds the reduced plant capacity (17,500 windows), the company cannot fulfill the special order without affecting its regular business. Therefore, the special order should be rejected.
3. In this case, we need to consider the potential impact of the special order on the existing customers' demand for a price discount.
Incremental revenue:
Number of windows in the special order: 5,000
Price per window: $125
Total incremental revenue: 5,000 × $125 = $625,000
Incremental costs:
Direct materials: $300,000
Direct manufacturing labor: $150,000
Variable costs (for setups, materials handling, quality control, etc.) for 100 batches: 100 × $1,250 = $125,000
Total incremental costs: $300,000 + $150,000 + $125,000 = $575,000
Total incremental profit = Incremental revenue - Incremental costs
= $625,000 - $575,000
= $50,000
If the existing customers demand a price discount of $15 per window, the cost per window for the special order would effectively decrease by $15. Therefore, the incremental costs for the special order would decrease by $15 × 5,000 = $75,000.
Adjusted incremental costs = $575,000 - $75,000 = $500,000
Adjusted total incremental profit = $625,000 - $500,000 = $125,000
Since the adjusted total incremental profit is still positive ($125,000), even considering the potential price discount, the company should accept the special order.
learn more about Incremental costs: https://brainly.com/question/25811981
#SPJ4
The complete question goes thus:
The Company manufactures windows. Its manufacturing plant has the capacity to produce 20000 windows each month. Current production and sales are 15000 windows per month. The company normally charges $250 per window. Cost information for the current activity level is as follows:
Variable costs that vary with number of units produced
Direct materials
$300,000
Direct manufacturing labour
150,000
Variable costs (for setups, materials handling, quality control, and so on)
that vary with number of batches, 300 batches x $1,250 per batch
375,000
Fixed manufacturing costs
125,000
Fixed marketing costs
55,000
Total costs
$1,005,000
The company has just received a special one-time-only order for 5,000 windows at $125 per window. Accepting the special order would not affect the company's regular business or its fixed costs. Good Job makes windows for its existing customers in batch sizes of 50 windows (300 batches x 50 windows per batch = 15,000 windows). The special order requires Good Job to make the windows in 100 batches of 50 windows.
1. Should accept this special order? Show your calculations.
2. Suppose plant capacity were only 17500 windows instead of 20000 windows each month. The special order must either be taken in full or be rejected completely. Should accept the special order? Show your calculations.
3. As in requirement 1, assume that monthly capacity is 20000 windows . the company is concerned that if it accepts the special order, its existing customers will immediately demand a price discount of $15 in the month in which the special order is being filled. They would argue that 's capacity costs are now being spread over more units and that existing customers should get the benefit of these lower costs. Should accept the special order under these conditions? Show your calculations.
Demand for Corn Flakes is: P= 10-Q. Supply of Kellogg's Corn Flakes is:
P=2+Q. Now a generic company enters the market, selling generic Corn Flakes for $5. Assume consumers are indifferent between generic and Kellogg's Corn Flakes. How many boxes of generic Corn Flakes will sell? Enter as a value.
The market price of Kellogg's Corn Flakes is given as P=2+Q, while the market price of generic Corn Flakes is $5. Assume that customers are indifferent between Kellogg's and generic Corn Flakes.
Below is the explanation on how many boxes of generic Corn Flakes will be sold:
Solving for Q and setting P for Kellogg's Corn Flakes and generic Corn Flakes equal to one another, we can find the quantity of Kellogg's Corn Flakes demanded at a given price:$10 - Q = $5 + $2 + Q => $10 - $7 = 2Q => 3/2 = Q.
At a price of $7, the quantity demanded of Kellogg's Corn Flakes is 3/2.
We know that consumers are indifferent between Kellogg's and generic Corn Flakes, thus the quantity demanded of generic Corn Flakes will also be 3/2.
Hence, the number of boxes of generic Corn Flakes that will be sold will be 1.5.
Answer: 1.5.
To know more about market price visit:
https://brainly.com/question/31964955
#SPJ11
Describe and evaluate one or two communication issues you noticed or experienced. Confronted head-on What occurred? Recommend some strategies for overcoming obstacles or challenges. On the purchaser and IT support specialist position.
As a purchaser and IT support specialist, there are a number of communication issues that may arise.
One such issue is a lack of understanding between the two departments. In this case, the IT support specialist may not fully understand the needs of the purchaser, leading to delays or misunderstandings.
Another communication issue could be a breakdown in communication due to conflicting priorities. In this case, the purchaser may be focused on acquiring the necessary hardware and software, while the IT support specialist may be focused on maintaining existing systems and infrastructure.
To overcome these challenges, it is important to confront them head-on. This means taking the time to listen to the concerns and needs of both departments and working together to find solutions.
One strategy for overcoming these challenges is to establish clear lines of communication between the purchaser and IT support specialist. This can be done through regular meetings, emails, or other forms of communication.
Another strategy is to establish a clear set of priorities for both departments. This can help ensure that both departments are working towards the same goals and that their efforts are aligned. Finally, it may be helpful to bring in outside consultants or experts to provide additional support and guidance as needed.
To know more about communication issues click on below link:
https://brainly.com/question/30581257#
#SPJ11
MM Proposition I, without taxes, assumes that
A. debt is riskless.
B. individuals and corporations can borrow at the same rate.
C. firms can borrow at the risk-free rate.
D. all firms will prefer an u
Modigliani-Miller Proposition I (MM Proposition I), under the assumption of no taxes, states that in a perfect and frictionless capital market, the capital structure decisions of a firm do not impact its overall value.
According to this proposition, all firms, regardless of their debt-to-equity ratios, have the same cost of capital. This means that the riskiness of debt does not matter, individuals and corporations can borrow at the same rate, and firms can borrow at the risk-free rate.
The value of a firm is determined solely by its underlying assets and the expected earnings from those assets, irrespective of how the firm is financed. Therefore, MM Proposition I implies that in a world without taxes, capital structure decisions are irrelevant to the valuation of a firm.
To know more about capital visit-
brainly.com/question/14264577
#SPJ11
Where do you find a company's closing stock price on the date
(or closest date) of each financial statement on marketwatch?
MarketWatch is a web-based financial news platform that offers comprehensive financial information, including stock quotes, news, analysis, market data, and tools.
You can find a company's closing stock price on the date (or closest date) of each financial statement on MarketWatch's website by following the given instructions:
Step 1: Visit the official website of MarketWatch.
Step 2: Enter the name or symbol of the company whose stock price you want to check.
Step 3: Click on the "Quote" button.
Step 4: Scroll down to the "Historical Quotes" section and select the time frame you're interested in (e.g., daily, weekly, monthly).
Step 5: You'll see the closing stock price of the company on the date (or closest date) of each financial statement in the "Close" column.
MarketWatch is one of the most popular and comprehensive financial news platforms that provides investors with real-time quotes, breaking news, analysis, and tools to track their investments. You can easily find a company's closing stock price on the date (or closest date) of each financial statement on MarketWatch's website.The process of finding a company's closing stock price on MarketWatch is simple and straightforward. All you have to do is enter the name or symbol of the company you're interested in, click on the "Quote" button, and scroll down to the "Historical Quotes" section. From there, you can select the time frame you're interested in (e.g., daily, weekly, monthly) and see the closing stock price of the company on the date (or closest date) of each financial statement in the "Close" column.
It's worth noting that MarketWatch provides historical data for up to 20 years, which can be useful for investors who want to analyze the performance of a company over a long period of time. Additionally, MarketWatch offers a range of other tools and resources, including real-time charts, news alerts, and market data, to help investors make informed investment decisions.
MarketWatch is a reliable and comprehensive financial news platform that provides investors with valuable information, including stock quotes, news, analysis, market data, and tools. You can find a company's closing stock price on the date (or closest date) of each financial statement on MarketWatch's website by following the above steps. Additionally, MarketWatch offers a range of other tools and resources, such as historical data, real-time charts, news alerts, and market data, to help investors make informed investment decisions.
To learn more about financial news platform visit:
brainly.com/question/32571346
#SPJ11
(Real interest rates: approximation method) if the real risk-free rate of interest is 4.8% and the rate of inflation is expected to be constant at a level of 3.1%, what would you expect 1-year Treasury bills to return if you ignore the cross product between the real rate of interest and the inflation rate? CEW The expected rate of retum on 1-year Treasury bills is%. (Round to one decimal place.)
Real interest rates: Approximation Method The expected rate of return on 1-year Treasury bills is 1.7%.
In the approximation method, we use the following formula:
1 + Nominal rate = (1 + Real risk-free rate) × (1 + Expected inflation rate)
Where, Nominal rate is the rate of return on 1-year Treasury bills Real risk-free rate of interest = 4.8%
Expected inflation rate = 3.1%
Therefore,
1 + Nominal rate = (1 + 0.048) × (1 + 0.031)1 + Nominal rate = 1.079088
Nominal rate = 1.079088 – 1
Nominal rate = 0.079088 or 7.9%
However, we have to ignore the cross product between the real rate of interest and the inflation rate. Therefore, the expected rate of return on 1-year Treasury bills is:
Nominal rate = Expected inflation rate
Nominal rate = 3.1%
Nominal rate = 0.031 or 1.7%
Thus, the expected rate of return on 1-year Treasury bills is 1.7%.
To know more about return visit:
https://brainly.com/question/29730147
#SPJ11
If a fixed asset, such as a computer, were purchased on January 1st for $2,364 with an estimated life of 4 years and a salvage or residual value of $109, the journal entry for monthly expense under straight-line depreciation is
a.
Depreciation Expense 46.98 Accumulated Depreciation 46.98
b.
Accumulated Depreciation 46.98 Depreciation Expense 46.98
c.
Accumulated Depreciation 563.75 Depreciation Expense 563.75
d.
Depreciation Expense 563.75 Accumulated Depreciation 563.75
The correct journal entry for the monthly expense under straight-line depreciation is: (option a)
Depreciation Expense $46.98
Accumulated Depreciation $46.98
To calculate the monthly expense under straight-line depreciation, we need to determine the annual depreciation expense first.
In this case:
Cost of the asset = $2,364
Estimated life of the asset = 4 years
Salvage or residual value = $109
The formula for straight-line depreciation is:
Depreciation Expense = (Cost of the asset - Salvage value) / Useful life
Depreciation Expense = ($2,364 - $109) / 4
Depreciation Expense = $2,255 / 4
Depreciation Expense = $563.75 per year
To record the monthly expense, we divide the annual depreciation expense by 12:
Monthly Depreciation Expense = $563.75 / 12
Monthly Depreciation Expense ≈ $46.98
Therefore, the correct journal entry:
Depreciation Expense $46.98
Accumulated Depreciation $46.98
So, the correct option is a.
Learn more about depreciation here:
https://brainly.com/question/27971176
#SPJ11
A consumer has set a budget of $1,200 for the consumption of good X and Y. The price of Good X $20, and the price of good Y is $40. The consumer has a Utility function given by U(X,Y)=x²y. a) Find the optimal consumption choice of the individual and the utility obtained. b) Make a graph that illustrates the solution to the problem. c) Briefly express in writing the process that you used to find the solution.
a) The optimal consumption choice is X = 18 and Y = 15, and the corresponding utility is U(X, Y) = 18² * 15.
b) The graph illustrating the solution would have the quantity of good X on the x-axis and the quantity of good Y on the y-axis.
c) The process used to find the solution involved setting up the maximization problem with the utility function and the budget constraint, substituting the budget constraint into the utility function, taking the derivative, setting it equal to zero, solving for Y, finding X using the budget constraint, and finally obtaining the optimal consumption choice (X, Y) and the corresponding utility value.
To find the optimal consumption choice and utility, we can use the concept of utility maximization subject to a budget constraint. The consumer wants to maximize their utility U(X, Y) = X²Y, given a budget constraint of $1,200 and prices of $20 for good X and $40 for good Y.
a) To find the optimal consumption choice, we need to allocate the budget between goods X and Y in a way that maximizes the utility. We can set up the following problem:
Maximize U(X, Y) = X²Y
Subject to the budget constraint: $20X + $40Y = $1,200
To solve this problem, we can use the Lagrange multiplier method or the substitution method. In this case, let's use the substitution method:
From the budget constraint, we can rewrite it as X = (1,200 - 40Y)/20.
Substituting this expression for X in the utility function, we have U(Y) = [(1,200 - 40Y)/20]²Y.
To maximize U(Y), we can take the derivative with respect to Y and set it equal to zero:
dU(Y)/dY = 0.
After differentiating and simplifying, we get:
-2,400Y + 36,000 = 0.
Solving for Y, we find Y = 15.
Substituting Y = 15 back into the budget constraint, we can find X:
X = (1,200 - 40 * 15)/20 = 18.
Therefore, the optimal consumption choice is X = 18 and Y = 15, and the corresponding utility is U(X, Y) = 18² * 15.
b) The graph illustrating the solution would have the quantity of good X on the x-axis and the quantity of good Y on the y-axis. The budget constraint can be plotted as a straight line with an intercept of 60 on the X-axis (1,200/20) and an intercept of 30 on the Y-axis (1,200/40). The optimal consumption choice (18, 15) would be the point where the budget constraint is tangent to an indifference curve representing the utility function U(X, Y) = X²Y.
c) The process used to find the solution involved setting up the maximization problem with the utility function and the budget constraint, substituting the budget constraint into the utility function, taking the derivative, setting it equal to zero, solving for Y, finding X using the budget constraint, and finally obtaining the optimal consumption choice (X, Y) and the corresponding utility value.
To know more about utility maximization, refer to the link below:
https://brainly.com/question/6002054#
#SPJ11
Company A, manufacturer of prefabricated houses for over 20 years, designated the Division 1 as an investment center. Presently, Division 1 generated a sales revenue of P4,800,000, net operating income of P696,000 and reported an asset balance of P4,000,000. The president has indicated that the division's rate of return on investment must be increased to at least 20 % by end of the next year if operations are to continue. If Division 1 were in an industry where the profit margin could not be increased, how much would the investment turnover have to increase to meet the president's required ROI?
To meet the president's required ROI of 20%, Division 1's investment turnover must increase to 137.93%.
Company A, a manufacturer of prefabricated houses for over 20 years, designated Division 1 as an investment center. Presently, Division 1 generated a sales revenue of P4,800,000, a net operating income of P696,000, and reported an asset balance of P4,000,000. The president has indicated that the division's rate of return on investment must be increased to at least 20 % by the end of next year if operations are to continue. If Division 1 were in an industry where the profit margin could not be increased, the investment turnover would have to increase to meet the president's required ROI.An investment center is a department, division, or subsidiary of a business that is expected to generate a return higher than the company's hurdle rate, which is the minimum acceptable rate of return. A company's ROI is calculated by dividing its net operating income by its average operating assets. To increase ROI, either net operating income must increase, or average operating assets must decrease.
According to the information provided above:
Net operating income = P696,000
Total operating assets = P4,000,000
Rate of return on investment = 17.4% (i.e., 696,000 ÷ 4,000,000 × 100)
Required rate of return on investment = 20 %
To calculate the investment turnover required to meet the president's required ROI, use the following formula:
ROI = Investment turnover x Profit margin
ROI = Net operating income ÷ Total operating assets
Profit margin = Net operating income ÷ Sales revenue
To achieve the required ROI, the investment turnover would have to be equal to:
ROI = Investment turnover x Profit margin20% = Investment turnover x (696,000 ÷ 4,800,000)20% = Investment turnover x 0.145Investment turnover = 20% ÷ 0.145Investment turnover = 137.93 %
Therefore, to meet the president's required ROI of 20%, Division 1's investment turnover must increase to 137.93%.
Learn more about ROI visit:
brainly.com/question/31376146
#SPJ11
Assume that Datawrapper has just hired you to pitch their software to the Canadian market. Write a persuasive marketing document that you could circulate to prospective purchasers, making sure that you include at least the following elements: i) an explanation of exactly what the software can be used for, ii) a detailed overview (step-by-step) of exactly how it can be used to create data visualization items, iii) a discussion of the advantages and disadvantages of this particular software versus competing software that you either know about or that you can imagine being available in the market, and iv) a devastatingly effective final summing up.
Datawrapper is a powerful data visualization software that enables users to create visually appealing and interactive data visualizations for various purposes, providing a competitive edge in the Canadian market.
How can Datawrapper software benefit the Canadian market?
Datawrapper is a versatile software that offers a wide range of applications for businesses and individuals in the Canadian market. It allows users to transform complex data into compelling visualizations that are easy to understand and engage with. Whether you need to create informative charts, graphs, maps, or interactive dashboards, Datawrapper has you covered.With Datawrapper's user-friendly interface and intuitive design, anyone can create stunning data visualizations in a few simple steps. The software provides a detailed step-by-step process, guiding users through the entire visualization creation process.
From importing data to customizing visual elements, Datawrapper ensures a seamless experience.One of the key advantages of Datawrapper is its flexibility and compatibility. It supports a wide range of data formats and allows for easy integration with popular data analysis tools, making it a valuable asset for professionals working with different data sources. Furthermore, Datawrapper offers various customization options, enabling users to tailor visualizations to their specific needs.
While considering competing software, Datawrapper stands out with its user-friendly interface, comprehensive feature set, and robust customer support. It provides an extensive library of chart types and customization options, giving users the freedom to create visually stunning and meaningful visualizations.
As for disadvantages, Datawrapper's pricing structure may vary depending on the specific needs of each user or organization. Additionally, while Datawrapper offers a rich set of features, some highly specialized requirements might necessitate additional tools or software.In conclusion, Datawrapper is an invaluable software for the Canadian market, empowering users to unlock the potential of their data through visually compelling and interactive visualizations. With its user-friendly interface, extensive customization options, and compatibility with various data formats, Datawrapper is an indispensable tool for professionals, businesses, and organizations seeking to make data-driven decisions and effectively communicate insights. how Datawrapper can revolutionize data visualization in the Canadian market.
Learn more about Canadian market
brainly.com/question/14143278
#SPJ11