Categorize the compounds below as meso or non-meso species. 10th attempt See Periodic Table See Hint Items (6 images) (Drag and drop into the appropriate area below) mon Categories Meso Compounds Non-Meso Compounds Drag and drop here Drag and drop here U7 QueSLIUI 11 point Categorize the compounds below as meso or non-meso species. 10th attempt See Periodic Table See Hint Items (6 images) /Drag and drop into the appropriate area below) OH Categories Meso Compounds Non-Meso Compounds Drag and droghere

The mass of the calcium carbonate that would dissolve in the compound is 1.15 g.

We know that the solubility product has to do with the equilibrium constant that we can be able to use in the process of trying to find the amount of the substance that is going to dissolve in the solution.

In this case, we have the volume and the concentration of the salt and we want to find the amount of the calcium carbonate that is going to be dissolved in the solution as we have it in the question.

Thus we can write;

Number of moles = mass/molar mass

Number of moles = concentration * volume

= 230/1000 L *  0.0500 M

= 0.0115 moles

The molar mass of calcium carbonate is 100 g/mol

Mass of the compound = 0.0115 moles * 100 g/mol

= 1.15 g

Learn more about solubility product:https://brainly.com/question/1419865

#SPJ1

Answer:

1)  in America was an attempt to abolish slavery in a country that valued individual liberty and held the notion that "all men are created equal." Abolitionists became more adamant in their demands as time went on, while slave owners became entrenched (difficult to reform) in reaction, causing regional strife that eventually sparked the American Civil War.

2) Repetition:

Lincoln emphasizes particular phrases by using repetition. We've arrived to devote a piece of that field. But we can't dedicate in a broader sense. The unfinished job that the soldiers who fought here have thus far so valiantly progressed is for us, the living, to be dedicated here.

Parallel organization:

Sentence structure has to deal with parallelism. To draw emphasis to certain ideas, establish a sense of balance in the sentence, and give the sentences a pleasant rhythm, the same grammatical form is used in a succession of two or more concepts.

3)

According to the wording I read, "The right of citizens of the United States to vote shall not be denied or restricted on account of race, color, or prior condition of servitude by the United States or by any state." Stanton and her coworkers found it incomprehensible that their male allies had failed to involve women in the fight for voting rights. Stanton and her white female coworkers argued in response.

Chemical reaction is the term which describes the conversion of substances into different substances.

Chemical reactions are defined as reactions which occur when a substance combines with another substance to form a new substance.Alternatively, when a substance breaks down or decomposes to give new substances it is also considered to be a chemical reaction.

There are several characteristics of chemical reactions like change in color, change in state , change in odor and change in composition . During chemical reaction there is also formation of precipitate an insoluble mass of substance or even evolution of gases.

There are three types of chemical reactions:

1) inorganic reactions

2)organic reactions

3) biochemical reactions

Learn more about chemical reactions,here:

https://brainly.com/question/14929452

#SPJ1

According to the molecular geometry, the shape of XeF₃[tex]^+[/tex] is T-shaped as there is less anti-bonding interaction.

Molecular geometry can be defined as a three -dimensional arrangement of atoms which constitute the molecule.It includes parameters like bond length,bond angle and torsional angles.

It influences many properties of molecules like reactivity,polarity color,magnetism .The molecular geometry can be determined by various spectroscopic methods and diffraction methods , some of which are infrared,microwave and Raman spectroscopy.

They provide information about geometry by taking into considerations the vibrational and rotational absorbance of a substance.Neutron and electron diffraction techniques provide information about the distance between nuclei and electron density.

Learn more about molecular geometry,here:

https://brainly.com/question/24232047

#SPJ4

The structure of (z)-1-chloro-2-methyl-2-butene is in the image attached.

Organic compounds in chemistry are any chemical compounds that have carbon-hydrogen or carbon-carbon bonds. Millions of organic compounds are known due to carbon's propensity to catenate (form chains with other carbon atoms). Organic chemistry is the science that studies the characteristics, reactions, and synthesis of organic molecules.

For historical reasons, a few classes of carbon-containing compounds (e.g., carbonate salts and cyanide salts), as well as a few other outliers (e.g., carbon dioxide, hydrogen cyanide), are not categorised as organic and are classified as inorganic. Other than the aforementioned, there is no agreement among chemists on which carbon-containing molecules are excluded, making any strict definition of an organic compound tricky.

To learn more about Structure of organic compounds, here

brainly.com/question/29098086

#SPJ4

The Baeyer's test or KMnO4  test for unsaturation is for determining the presence of carbon-carbon double-bonded compounds, called alkenes or carbon-carbon triple bonded compounds, called alkynes.

A chemical compound is a substance made of many identical molecules (or molecular entities) joined by chemical bonds and containing atoms from various chemical elements. Therefore, a molecule made up of atoms of only one element is not a compound. Chemical reactions, which may involve interactions with other substances, can change a compound into another substance. Atomic bonds may be broken or created during this process.

Compounds can be divided into four main categories according to the way their individual atoms are joined. Covalent bonds hold together molecules; ionic bonds hold together ions; metallic bonds hold together intermetallic compounds; and coordinate covalent bonds hold coordination complexes together.

Learn more about compound

https://brainly.com/question/26487468

#SPJ4

The value of the formation constant, Kf , for the reaction at 25 ∘C entropy is  37.976 x 103

ΔG = ΔH  - Δ(TS)

ΔH =  -23.5 x 103 J

ΔS  =  8.82 J/K

T  = 273 +25 = 298 K

ΔG= -23.5 x 103 - 298 (8.82)

ΔG= -  26.13 x 103 J or  - 26.13  kJ

ΔG= -RTlnK

ΔG = -  26.13 x 103 J

R = 8.314 J K-1 Mol-1

T = 298

-  26.13 x 103 J   =  - 8.314 x 298 ln

lnK = 10.54

K = 37.976 x 103

A state of disorder, randomness, or uncertainty is most frequently connected with the scientific notion of entropy, which is also a quantifiable physical attribute. The notion and the phrase are employed in a variety of disciplines, including classical thermodynamics, where they were initially identified, statistical physics, which describes nature at the molecular level, and information theory. It has numerous uses, including the transmission of information in information systems, cosmology, economics, sociology, weather science, and biological systems and their relationship to life. Scottish engineer and scientist William Rankine used the terms thermodynamic function and heat potential to refer to the thermodynamic notion in 1850.

Learn more about entropy here:

https://brainly.com/question/16395275

#SPJ4

The amount of grams are in 1.00 mole of magnesium will be 24.305 grams.

Grams can be determined by using the formula:

Moles of Magnesium × 24.305 = Grams of magnesium.

24.305 is the mas of magnesium,

so,

1 x 24.305 = 24.305 grams.

Thus, 24.305 gramme of magnesium make up 1 mole.

The mole would be the volume of a system that has the same number of atoms in 0.012 kilogram of carbon 12 even though the constitute of elementary particles.

It may be used to quantify the chemical reaction's byproducts.

A compound's chemical composition was symbolically represented by its chemical formula.

When one or even more chemicals are transformed into one or more additional compounds, a chemical reaction takes place.

Learn more about moles here :-

https://brainly.com/question/26416088

#SPJ4

Answer:

Deposition: the process in which a gas changes directly to a solid without going through the liquid stage.

In the above given exam the wind and cold blowing on a cold winter day formed ice due to the weather an temperature outside. It was on the windshield as it found a perfect slanting surface to get stuck to.  

Enzymes aren't reactants and aren't used up in the course of the reaction. Once an enzyme binds to a substrate and catalyzes the reaction, the enzyme is released.

This method that for every reaction, there does now no longer want to be a 1:1 ratio among enzyme and substrate molecules. The response then occurs, changing the substrate into merchandise and forming an enzyme merchandise complicated. The merchandise then go away the energetic site of the enzyme. The first step of an enzyme catalyzed response is catalytic turnover the binding of substrate via way of means of the enzyme the discharge of product dissociation of the ES complicated ES -> E + P. An enzyme-catalyzed response may be more or less divided into 3 stages: enzyme-substrate binding, "catalysis" and product release.

To learn more about enzyme check the link below:

brainly.com/question/1596855

#SPJ4

All cations are positive because cations are formed due to loss of electrons. So they are electron deficient.

The formation of a chemical bond between two or more atoms, molecules, or ions results in the formation of a chemical compound. A chemical bond is a long-lasting attraction between atoms or ions that enables the formation of molecules and crystals. Electrostatic contact between oppositely charged ions forms ionic bonds, whereas electron sharing forms covalent bonds.

Chemical bonds link molecules and generate transient connections that allow life to exist. Chemical bonding includes covalent, ionic, and hydrogen bonds, as well as London dispersion forces. Valence electrons are electrons that are the furthest away from the nucleus, have the least attraction from it, and so are the most reactive.

To learn more about CHEMICAL BONDING, here

https://brainly.com/question/12907148

#SPJ4

The mixture's pressure of 5.34 atm is equal to the partial pressure of the produced oxygen.

Ptotal = 5.09 + 3.82 + 2.54, or approximately 11.45 atm, is obtained by multiplying 0.2 mol by our constant of 0.0821 and our temperature of 310 degrees K, then dividing by 2 liters to obtain the partial pressure of carbon dioxide.

One of two methods can be used to compute partial pressures: 1) Use PV = nRT to calculate the individual pressure of each gas in a mixture. 2) Using the mole fraction of each gas, calculate the percentage of the total pressure that may be allocated to each individual gas.

To know more about Partial pressures visit:-

https://brainly.com/question/13199169

#SPJ4

NaCl has a mole fraction of.0.0139.

Mole fraction is a unit of concentration, to put it concisely. The mole fraction, which is denoted by "X," is a unit of measurement for the ratio of solute to solvent in a solution.

Mole fraction = solute concentration in mol/solute concentration (mol) plus solvent concentration (mol)

0.1/0.1 + 7.05 = 0.0139 is the mole fraction.

NaCl has a mole fraction of.0.0139 as a result.

To get the mass percent of an element in a compound, multiply the result by 100 after dividing the mass of the element in 1 mole of the compound by the compound's molar mass.

To know more about mole fraction visit:-

https://brainly.com/question/29808190

#SPJ4

The conclusion that can be obtained from these observations is that the reaction has gone through a chemical change which produces a new substance called a precipitate.

Precipitates are solid particles (solid) that are usually formed from the agglomeration/synthesis of dissolved/suspended chemical particles in liquids. Precipitation reactions are chemical reactions that occur when a solid is separated from a liquid. Substances that are separate and insoluble in liquid are called precipitates.

Chemical reactions that produce sediment, for example, include the occurrence of carbonate compounds on the bottom of the pot when boiling water. When lime water is blown, a reaction will occur between the lime water and the carbon dioxide produced by breathing.

This question is multiple choice:

Learn more about Precipitation reactions at https://brainly.com/question/20469884

#SPJ4

The opposite of D-glucose is L-glucose. However, D-Glucose cannot superimpose this mirror image. L-Glucose is therefore regarded as the D-Glucose enantiomer.

Each chiral carbon in D- and L-glucose has a different conformation. D-glucose rotates the polarized light plane clockwise to the right, whereas L-glucose rotates it counterclockwise to the right (anticlockwise).

The arrangements of amino acids and carbohydrates are denoted by the letters D and L, respectively. As an arbitrary reference point for the D and L notation in sugar chemistry, glyceraldehyde has been used. Because this has an asymmetric carbon and can exist as two distinct enantiomers.

To know more about D- and L-glucose visit:-

https://brainly.com/question/29194365

#SPJ4

B2O3 (s)  + 6HF (l)  ---------> 2BF3 (g)  + 3 H2O (l) is the balanced equation.

A chemical equation is a graphical representation of the a chemical reaction using symbols but also chemical formulas. The reactant enterprises are on the left, and the product entities are on the right, with a plus sign between both the entities both the reactants and products, as well as an arrow pointing towards the products to indicate the reaction's direction.

Given reaction is  

                          B2O3 (s)  + HF (l)  ---------> BF3 (g)  +  H2O (l)

On left side 2 B atoms.  To equalize B atoms , put coefficient 2 for BF3.

                          B2O3 (s)  + HF (l)  ---------> 2BF3 (g)  +  H2O (l)

Now on right side 6 F atoms.  To equalize F atoms , put coefficient 6 for HF.

                          B2O3 (s)  + 6HF (l)  ---------> 2BF3 (g)  +  H2O (l)

Now on right side 6 H atoms.  To equalize H atoms , put coefficient 3 for H2O.

                           B2O3 (s)  + 6HF (l)  ---------> 2BF3 (g)  + 3 H2O (l)

Now all atoms are balanced.

Therefore, balanced equation is B2O3 (s)  + 6HF (l)  ---------> 2BF3 (g)  + 3 H2O (l)

To know more about the Balanced Equation, here

https://brainly.com/question/12192253

#SPJ4

Sugar solution has a 0.03 mol/L concentration.

In chemistry, the term "solubility" describes a material's capacity to dissolve in another substance (the solvent). The solute's inability to create such a solution is known as insolubility.

The amount of a solute in a saturated solution, or a solution in which no more solute can be dissolved, is typically used to gauge how soluble a substance is in a given solvent. The two compounds are said to be in balance for solubility at this time.

Sugar's molar mass equals 342g/L

Number of solute moles = 20/342 = 0.0584 moles

Molecularity = 0.0584

20

1. molarity = 0.03 mol/L

For further information on molarity

Visit

https://brainly.com/question/8732513

#SPJ4

Answer: Fluorine

Explanation:   There are many variables that can affect the strenght of attraction of the electrons in a chemical bond.

The most significant of them is the electronegativity: a meassure of the affinity an element has with the electrons . The higher the electronegativity, the stronger the attraction with electrons.

Brainliest pls Have a nice day

Answer:

Nitrogen is N2

Oxygen is O2

Carbon dioxide is CO2

Answer:A

Explanation:

All elimination products for the given molecules are shown in the attached diagram below.

Hofmann elimination can be demonstrated as an elimination reaction of an amine to prepare alkenes. The least stable alkene among all the possible products called the Hofmann product is generated from the Hofmann alkene synthesis rule. This rule contradicts Zaitsev's rule which gives the formation of the most stable alkene.

The Hofmann product in the elimination reaction is preferentially formed because of the steric hindrance of the leaving group causing the hydroxide to abstract easily approachable hydrogen.

In the Hofmann elimination, the least substituted alkene will be favorable due to intramolecular steric interactions. The formation of the more substituted alkene product is energetically less favorable than the formation of the Hofmann product.

Therefore, the Hofmann product is preferably formed. In the reaction, less substituted alkene will be formed due to the bulkiness of the other groups.

Learn more about elimination reactions, here:

brainly.com/question/29695970

#SPJ4

When you put 100 grams of sugar to a 100 mL of water there is no increase in volume. The characteristic of matter illustrated by this observation is that the particles of water have spaces between them into which sugar particles fit.

When two or more chemically unrelated compounds are combined, they form a mixture.

In general, homogeneous and heterogeneous mixtures are categorised.

In contrast to heterogeneous mixtures, homogeneous mixtures have a consistent composition throughout.

A homogeneous mixture is exemplified by the mixing of sugar and water.

Sugar dissolves into smaller crystals when it is combined with water, and these smaller sugar particles fill the spaces left by the water molecules to create a homogeneous combination of sugar syrup.

This sugar solution has a consistent chemical make-up.

Learn more about Mixture here:

https://brainly.com/question/2331419

#SPJ4

The "percent abundance" of the cannellini beans in this sample is 11.76 %.

In essence, percentages are fractions with a 100 as the denominator. We place the percent symbol (%) next to the number to indicate that the number is a percentage. For instance, you would have received a 75% grade if you answered 75 out of 100 questions correctly on a test (75/100).

The word percentage comes from the Latin term per centum, which means "by the hundred." In the 16th century, the Latin phrase made its way into English. Later, it was shortened to percent and ended with a period. Later, the period was eliminated, and the two portions were combined to create the current one-word form of percent.

Thus, The "percent abundance" of the cannellini beans in this sample is 11.76 %.

To learn more about the percent, follow the link;

https://brainly.com/question/14699403

#SPJ1

While performing bag- mask ventilation with oxygen connected with the oxygen flow at 15 L / Min, then it will provide 90 tp 95% of oxygen.

In the Bag-valve-mask ventilation,  Bag valve mask devices are the preferred equipment to deliver positive pressure ventilation to the apneic patient.  Every dental office must have the ability to deliver oxygen with positive pressure. This may be accomplished with either oxygen-powered resuscitators bag valve mask devices. During positive pressure ventilation, there is always a significant risk for gastric distention and subsequent regurgitation or vomiting. This is due to the fact that when oxygen is introduced into the pharynx via positive pressure.

To learn more about Bag-valve-mask ventilation please visit:

https://brainly.com/question/10398102

#SPJ4

True, The statement that the amount of water vapor in the atmosphere varies depending on the conditions in the area is true.

The amount of water vapor present in the atmosphere is directly related to the temperature, pressure, and humidity of the air in the area. For example, in a hot and humid region, the atmosphere will have a higher amount of water vapor than in a cold and dry region. Additionally, the amount of water vapor in the atmosphere can also be affected by other factors such as wind speed and air movement, which can impact the temperature and humidity of the air in an area.

In addition, the amount of water vapor in the atmosphere can also be affected by human activities. For example, the burning of fossil fuels can increase the amount of water vapor in the atmosphere due to the release of water vapor from the burning process. Similarly, deforestation can reduce the amount of water vapor in the atmosphere as the trees are no longer able to absorb the moisture from the air.

Learn more about  water vapor at : https://brainly.com/question/22349941

#SPJ4

29.25 grams of NaCl, m.w. 58.5 daltons, are necessary to make 1 liter of 5% saline.

Molar concentration is a unit of measurement for the concentration of a chemical species, specifically a solute, in a solution, expressed as the amount of substance per unit volume of solution. The most often used unit for molarity in chemistry is the number of moles per litre, denoted by the unit symbol mol/L or mol/dm3 in SI units.

A solution's concentration is defined as the quantity of solute present in a given amount of solution. The concentration of any solution is defined as the solute divided by the volume of the solvent or solution. When represented as a percentage, it is known as mass by volume percent.

To learn more about concentration of a solution, here

https://brainly.com/question/10720472

#SPJ4

Alkanes, Hydrocarbons, and Chemistry amount of isomers overall, including st Question The total number of isomers for 1,2-dimethyl cyclobutane, including stereoisomers, is: A 2 with one trans and one cis (both optically inactive)

Two optically active trans forms, one cis form, and B3 C3, three optically active cis forms: one trans form and two. D

5 isomers are present. 1,2-Dimethylcyclopentane (trans) (trans) 1,2-Dimethylcyclopentane (cis) (cis) 1,3-Dimethylcyclopentane(trans) 1,3-Dimethylcyclopentane(cis) 1,1-Dimethylcyclopentane Response from toppr Upvote(3) How happy are you with the response? This will assist us in getting better. Structure of 1,3-dimethylcyclobutane PubChem CID 448071 Find Molecular Formulas for Similar Structures Synonyms for C6H12 Cyclobutane, 1,3-dimethyl 1,3-dimethylcyclobutane 84.16 molecular weight Add one additional row.

To learn more about Dimethylcyclopentane please click on below link

https://brainly.com/question/24208981

#SPJ4

Answer:

Yes, methanol can be a gas. Methanol is a chemical compound that is composed of carbon, hydrogen, and oxygen atoms. At room temperature and standard atmospheric pressure, methanol is a liquid, but it can easily be converted into a gas by heating it to a sufficiently high temperature.

Methanol has a relatively low boiling point of 148.5 degrees Fahrenheit (64.7 degrees Celsius), which means that it can be readily vaporized at relatively low temperatures. When methanol is heated to its boiling point, it will begin to convert from a liquid into a gas, and will continue to vaporize until it reaches a state of equilibrium with its surroundings.

Methanol gas has a number of important uses, including as a solvent, a fuel, and a starting material for the synthesis of other chemicals. It is also commonly used as a laboratory reagent, due to its low toxicity and low cost.

It is composed of fine metal and has 4% lead in it. The final variety of pewter, called "lay" or "ley" metal, was utilized for objects that were not in direct contact with food or liquids.

Although numerous lead-containing pewters are still being made for other uses, modern pewters can be found that are fully lead-free. Tin makes up 94% of the standard European casting alloy, together with 1% copper and 5% antimony. 92% tin, 2% copper, and 6% antimony would be the composition of a sheet of European pewter.

Older pewters with a higher lead content weigh more, tarnish more quickly, and develop a darker silver-grey color with time. As required by BS5140, lead was removed from the composition in 1974.

To know more about pewter visit:-

https://brainly.com/question/29627686

#SPJ4