Answer:
C2H4I2
Explanation:
Viscosity of a fluid has to do with the internal friction between the internal layers of the fluid.
Molecular weight is found to be related to the viscosity of a fluid even though the relationship may not be strictly linear.
However, the greater the molecular weight of a substance, the greater the viscosity of the material.
Since C2H4I2 has the greatest molecular weight (281.86 g/mol), it is also expected to display the greatest viscosity among all the compounds listed in the question.
How does the Big Bang theory explain why there is a lot of hydrogen and helium in the universe?
Answer:
when the explosion happened the matter fussed into elements as the electrons portions Nd notrons were compresed into the elements beacuase hydrogen has 1 nutron proton and electron surronding its core
HELP PLS THIS IS SO HARD AHHHHHHH
Determine how much sulfuric acid (in metric tons) is produced by the combustion of 1.2 metric ton of this coal. (A metric ton is 1000 kg.)
All forms of energy can exist as either ________ or ________ energy.
Answer:
potentiol or kenetic
Explanation:
Which metal does not form cations of differing charges?
Transition metals
Most transition metals differ from the metals of Groups 1, 2, and 13 in that they are capable of forming more than one cation with different ionic charges. As an example, iron commonly forms two different ions
only some particles split up into smaller particles
Answer:
Everything around you can be broken down into smaller particles called atoms. The particles of one substance are all the same and different substances are made up of different particles.
Explanation:
The molecules you use in a chemical reaction are called the:
Calculate the mass percent composition of O in each compound.
a. calcium nitrate
b. Iron(II) sulfate
c. Carbon dioxide
Answer:
A. Mass percent composition of oxygen = 58.5%
B. Mass percentage composition of oxygen = 42.1%
C. Mass percentage composition of oxygen = 72.7 %
Explanation:
Percentage mass composition of an element in a compound is given by the formula below:
Percentage mass composition = mass of element/ molar mass of compound × 100%
Percentage mass of oxygen in the given compounds are then calculated.
a. Calcium nitrate, Ca(NO₃)₂: molar mass of compound is obtained first.
Molar mass of Ca(NO₃)₂ = 40 + 14 × 2 + 16 × 2 × 3 = 164 g
Mass of oxygen = 16 × 6 = 96 g
Mass percent composition of oxygen = 96/164 × 100% = 58.5%
b. Iron (ii) sulfate, FeSO₄: molar mass of compound is obtained first.
Molar mass of FeSO₄ = 56 + 32 + 16 × 4 = 152 g
Mass of oxygen = 16 × 4 = 64 g
Mass percentage composition of oxygen = 64/152 × 100% = 42.1%
c. Carbon dioxide, CO₂: molar mass of compound is obtained first.
Molar mass of CO₂ = 12 + 16 × 2 = 44 g
Mass of oxygen = 16 × 2 = 32 g
Mass percentage composition of oxygen = 32/44 × 100% = 72.7 %
A worker gets paid 11.33 $/hour. The worker works on average 39.7 hours/week for 48 weeks per year. How much does the worker make in 1.7 years?
Answer:
36704 $
Explanation:
First we calculate how much the worker gets paid in one week:
11.33 $/hour * 39.7 hour/week = 449.80 $/weekThen we calculate how many weeks does the worker work in 1.7 years:
48 week/year * 1.7 years = 81.6 weeksFinally we calculate how much does the worker make in 1.7 years:
449.80 $/week * 81.6 weeks = 36704 $The student is now told that the four solids, in no particular order, are barium chloride (BaCl2), sugar (C6H12O6), butanoic acid (C3H7COOH), and sodium bromide (NaBr). Assuming that conductivity is correlated to the number of ions in solution, rank the four substances based on how well a 0.20 M solution in water will conduct electricity. Rank from most conductive to least conductive.
Answer:
The student is now told that the four solids, in no particular order, are barium chloride (BaCl2), sugar (C6H12O6), butanoic acid (C3H7COOH), and sodium bromide (NaBr). Assuming that conductivity is correlated to the number of ions in solution, rank the four substances based on how well a 0.20 M solution in water will conduct electricity. Rank from most conductive to least conductive.
Explanation:
The given substances are:
barium chloride(BaCl2),
glucose(C6H12O6),
butanoic acid (C3H7COOH) which is a weak acid,
sodium bromide (NaBr).
The conductivity of a solution is proportional to the number of ions present in a particular solution.
1mol. of BaCl2 in water produces a total three mol. of ions.
[tex]BaCl_2 (aq) -> Ba^2^+(aq) + 2Cl^-(aq)[/tex]
Gluocse is a covalent compound and it does not dissociate into ions in water.
So, it does not conduct electricity.
Butanoic acid is a weak acid. But due to the release of H+ ions it can conduct a very less amount of electricity.
NaBr is an ionic compound and in 1mol. of NaBr in water gives two mol. of ions.
NaBr (aq) -> Na+ (aq) + Br- (aq)
Hence, the order of conductivity among the given substances in aqueous solution is:
BaCl2 > NaBr > butanoic acid > glucose
The sloth is able to camouflage by moving really slowly and
A. changing colors
B. hanging upside down
D. having fur that is a similar color to tree barks with algae growing on it
Answer:
D. having fur that is a similar color to tree barks with algae growing on it
Explanation:
Choice A doesnt make sense because sloths do not change colors, and hanging upside down would not protect you from prey or blend in. D matches the description of a sloth.
Answer:
Having fur that is a similar color to tree barks with algae growing on it.
Explanation:
PLEASE TELL ME THE AWNSERS ITS A DOC FILE SO OPEN IT I WILL GIVE BRAINLIEST PLS HURRY
which substances would have exhibit a giant covalent structure explain
Answer:
Silicon
Explanation:
Silicon is in group IV with strong Si-Si ( Silicon to Silicon ) bonds. Since it is a molecule, these bonds exert a strong molecular force hence adopting a giant covalent structure.
how many atoms of carbon are in 6CO2 + 6H2O --> C6H12O6 + 6O2
Answer:
6 atoms of carbon are in the reactant side
Explanation:
Are on the reactant side in:
6CO2 + 6H2O → C6H12O6 + 6O2
In the reaction, there are 6 molecules of CO2 that are reacting with 6 molecules of H2O. As you can see, CO2 has only 1 atom of carbon per molecule whereas H2O hasn't.
That means the atoms of carbon are:
6 molecules CO2 * (1atom C / 1molecule CO2) =
6 atoms of carbon are in the reactant sideHow much energy is produced when 13.1 g of tin reacts with 2.715 g of N2 ?
I.
3 Sn + 2 N2-----------Sn3N4 + 632 KJ
Hint change grams to moles first.
1 mole Sn= 119g
1 mole N2= 28 g
Answer:
23.2 kJ of energy are released by the reaction.
Explanation:
Hello there!
In this case, according to the given information, it turns out firstly necessary for us to calculate the moles of both tin and nitrogen and the produced moles of Sn3N4 product by each reactant as shown below:
[tex]13.1gSn*\frac{1molSn}{119gSn} *\frac{1molSn_3N_4}{3molSn} =0.0367molSn_3N_4\\\\2.715gN_2*\frac{1molN_2}{28gN_2} *\frac{1molSn_3N_4}{2molN_2} =0.0485molSn_3N_4[/tex]
Thus, since 13.1 grams of tin produce the fewest moles of Sn3N4 product, we infer tin is the limiting reactant, and the correct produced energy, due to this reaction is:
[tex]E=632\frac{kJ}{mol\ rxn}*\frac{1mol\ rxn}{1molSn_3N_4}*0.0367mol Sn_3N_4\\\\E=23.2kJ[/tex]
Regards!
Which compound is insoluble in water?
Answer:
The answer is C... I am almost positive.
A small container is filled with liquid water. What can happen if the container of water is an open system that couldn't happen if it were a closed or isolated system?
Evaporation can decrease the amount of water. Dust from the surroundings can enter the water. The water can freeze if the surrounding temperature decreases sufficiently.
please help me asap!!
Answer:
Al2o3 is 101
(nh4)2O IS 52
S8 is 256.56
Ba(oh)2 is 171.35
Cacl2 is 110.98
H2O is 18.01
Explanation:
2. Which of the following best represents the nucleus in a model of an atom?
a positively charged nucleus consisting of protons and neutrons
O a positively charged nucleus consisting of electrons and neutrons
a neutral nucleus consisting of protons and neutrons
a neutral nucleus consisting of electrons and neutrons
Answer:
A positively charged nucleus consisting of protons and neutrons
Explanation:
The atomic nucleus is a positively charged region located at the core of an atom that consists of positively charged protons and neutral neutrons while the negatively charged electrons make up the outer cloud (electrons are therefore not contained in the nucleus).
Lemon juice has a pH of 2. What is the hydrogen ion concentration of lemon juice?
iodide (KI). Identify the correct products of this
reaction. (Note that NO3? is the nitrate ion, a
polyatomic ion.)
AgNO3 + KI – ?
AgK + INO3
✓
Agl + KNO3
Ag + K + I + NO3
COMPLETE
What type of reaction is this?
Answer:
AgNO3 + KI → Agl + KNO3. Double-replacement reaction
Explanation:
Based on solubility rules, Silver, Ag produce an insoluble salt in presence of halides (Fluorides F-, Chlorides Cl-, Iodides, I-, and bromides Br-). That means the mixture of AgNO3 (Ag⁺ ions) with KI (I- ions) produce AgI as insoluble salt.
The reaction is:
AgNO3 + KI → Agl + KNO3And this is a double-replacement reaction where the cations exchange of anion to produce 2 new compounds.
Answer:
AgI + KNO3
Explanation:
double replacement
Examine the differences between the expanded structure, the condensed structure, and bond-line representation.
Answer:
One structure shows all the bonds whereas the other shows some of the bonds.
Explanation:
Expanded structure shows all of the bonds connecting all of the atoms in the compound while on the hand, condensed structural shows all atoms, but exclude some or all of the vertical and horizontal bonds. condensed structure makes it easier to write the formula in a line as compared to expanded structure. A bond-line representation is a kind of representation of molecular structure of compounds on a line. In this representation, covalent bonds are represented with one line for each level of bond order.
Which of the following material is the weakest thermal conducters
a polluted lake is 0.300 μg (micrograms) per liter of water, what is the total mass of mercury in the lake, in kilograms, if the lake has a surface area of 15.0 square miles and an average depth of 27.0 feet?
Answer:
95.9 kg
Explanation:
First we convert 15.0 mi² to m²:
15.0 mi² * ([tex]\frac{1609.34 m}{1mi}[/tex])² = 3.88x10⁷ m²Then we convert 27.0 ft to m:
27.0 ft * [tex]\frac{0.3048m}{1ft}[/tex] = 8.23 mNow we calculate the total volume of the lake:
3.88x10⁷ m² * 8.23 m = 3.20x10⁸ m³Converting 3.20x10⁸ m³ to L:
3.20x10⁸ m³ * [tex]\frac{1000L}{1m^3}[/tex] = 3.20x10¹¹ LNow we calculate the total mass of mercury in the lake, using the given concentration:
0.300 μg / L * 3.20x10¹¹ L = 9.59x10¹⁰ μgFinally we convert μg to kg:
9.59x10¹⁰ μg * [tex]\frac{1kg}{1x10^9ug}[/tex] = 95.9 kgWhat is the balanced form of the chemical equation shown below?
Zn(NO3)2(aq) + Na S(aq) → ZnS(s) + NaNO3(aq)
We have a 3.7 L container filled with 82 g of CO gas. This container is maintained at a temperature of 298 K
a) How many moles of CO gas are in this container?
b) What is the pressure inside the container?
Answer:
a) 2.9 mol
b) 19 atm
Explanation:
Step 1: Given data
Volume of the container (V): 3.7 LMass of CO gas (m): 82 gTemperature (T): 298 KStep 2: Calculate the number of moles (n) corresponding to 82 g of CO
The molar mass of CO is 28.01 g/mol.
82 g × 1 mol/28.01 g = 2.9 mol
Step 3: Calculate the pressure (P) inside the container
We will use the ideal gas equation.
P × V = n × R × T
P = n × R × T / V
P = 2.9 mol × (0.0821 atm.L/mol.K) × 298 K / 3.7 L = 19 atm
A solution of permanganate is standardized by titration with oxalic acid, . To react completely with mol of oxalic acid required 28.18 mL of permanganate solution. The unbalanced chemical equation for the reaction in acidic solution is Determine the concentration of the permanganate solution in molarity. g
The question is incomplete, the complete question is:
A solution of permanganate is standardized by titration with oxalic acid. To react completely with 0.0018 mol of oxalic acid required 28.18 mL of permanganate solution. The unbalanced chemical equation for the reaction in acidic solution is:
[tex]\mathrm{MnO}_{4}^{-}(aq)+\mathrm{H}_{2}\mathrm{C}_{2}\mathrm{O}_{4}(aq)\stackrel{\mathrm{Acidic}}{\longrightarrow}\mathrm{Mn}^{2+}(aq)+\mathrm{CO}_{2}(\mathrm{g})[/tex]
Determine the concentration of the permanganate solution in molarity.
Answer: The molarity of permanganate solution is 0.026 M
Explanation:
The balanced chemical equation follows:
[tex]2MnO_4^-(aq)+6H^+(aq)+5H_2C_2O_4(aq)\rightarrow 2Mn^{2+}+8H_2O(l)+10CO_2(g)[/tex]
Given values:
Moles of oxalic acid = 0.0018 moles
By the stoichiometry of the reaction:
If 5 moles of oxalic acid reacts with 2 moles of permanganate solution
So, 0.0018 moles of oxalic acid will react with = [tex]\frac{2}{5}\times 0.0018mol=0.00072mol[/tex] of permanganate solution
Molarity is defined as the amount of solute expressed in the number of moles present per liter of solution. The units of molarity are mol/L. The formula used to calculate molarity:
[tex]\text{Molarity of solution}=\frac{\text{Moles of solute}\times 1000}{\text{Volume of solution (mL)}}[/tex] .....(1)
Given values:
Moles of permanganate solution = 0.00072 moles
Volume of solution = 28.18 mL
Putting values in equation 1, we get:
[tex]\text{Molarity of permanganate solution}=\frac{0.00072\times 1000}{28.18}\\\\\text{Molarity of permanganate solution}=0.026M[/tex]
Hence, the molarity of permanganate solution is 0.026 M
A buffer solution is prepared by adding 13.74 g of sodium acetate (NaC2H3O2) and 15.36 g of acetic acid to enough water to make 500 mL (three significant figures) of solution. Calculate the pH of this buffer.
Answer:
A buffer solution is prepared by adding 13.74 g of sodium acetate (NaC2H3O2) and 15.36 g of acetic acid to enough water to make 500 mL of solution.
Calculate the pH of this buffer.
Explanation:
The pH of a buffer solution can be calculated by using the Henderson-Hesselbalch equation:
[tex]pH=pKa+log\frac{[salt]}{[acid]}[/tex]
The pH of the given buffer solution can be calculated as shown below:
Calculate the density of CO2 at a pressure of 685.0 torr and 41.0°C .
R=0.0821 (L*atm)/(mol *K)
T=41+273=314 k
M=(12)+(16×2)=44g/mol
d=PM/RT
d=685×44/0.0821×314
d=1169.15 g/L
H2S + CuSO4--->
Complete the equation?