Answers
Answer:
Ok so I assume they gave u a reaction before asking this question. Look at that reaction and try to figure out what substances are changing in valency, if there is a substance(s) that doesn't change its valency then it's a spectator ion.
Related Questions
Match the following terms:
Answers
Answer:
See below ~
Explanation:
A to B
⇒ Solid Phase
==========================================================
B to C
⇒ Melting
==========================================================
C to D
⇒ Liquid Phase
==========================================================
D to E
⇒ Vaporizing
============================================================
E to F and beyond
⇒ Gas Phase
What is the name of cuo? explain how you determined the bond type and the steps you used to determine the naming convention for the compound.
Answers
The name of CuO is Copper(II) oxide have the two most common oxidation states of copper are +2 and +1.
What is copper oxide used for?Copper oxide is a trace element for the zootechnical and agricultural sector. Cupric oxide is also used as a raw material for the production of catalysts and pigments in the field of ceramics, glass and plastics.
This compound makes two different types of bonds being the hydrogen bond when it's a hydrogen and covalent bond when we have an oxygen or a nitrogen.
See more about Copper(II) oxide at brainly.com/question/24217869
#SPJ1
What is the change in the freezing point of water when 35.0 g of sucrose is
dissolved in 300.0 g of water?
Kf of water = -1.86°C/mol
molar mass sucrose = 342.30 g/mol
ivalue of sugar = 1
A. -0.183°C
B. 0.0606 °C
C. 0.217°C
D. -0.634°C
Answers
From the calculations, we can see that, the change in the freezing point is -0.634°C.
What is freezing point?The term freezing point refers to the temperature at which a liquid is changed to solid.
Given that;
ΔT = K m i
Number of moles sucrose = 35.0 g/ 342.30 g/mol = 0.1 moles
molality = 0.1 moles/ 300.0 * 10^-3 Kg
= 0.33 m
Thus;
ΔT = -1.86°C/mol * 0.33 m * 1
= -0.634°C
Learn more about freezing point:https://brainly.com/question/3121416
#SPJ1
Engineers are trying to improve a race car. Their goal is to increase the acceleration of the car using the same engine. Which change shows the best application of Newton’s laws of motion to achieve this goal?
increasing the inertia of the car
decreasing the reaction force
increasing the action force
decreasing the mass of the car
Answers
If the engineers are trying to increase the acceleration of the car, they have to decrease the mass of the car.
What is Newtons law?The Newtons laws of motion form the basis of the discussion about motion. We know that from the second law of Newton F = ma
Thus, if the engineers are trying to increase the acceleration of the car, they have to decrease the mass of the car.
Learn more about Newton's law:https://brainly.com/question/27573481
#SPJ1
(03.03 MC)
What best describes the bonding in a carbon dioxide molecule? (5 points)
- Carbon shares two of its electrons, and each oxygen shares four of its electrons.
- Carbon shares four of its electrons, and each oxygen shares two of its electrons.
- Carbon receives two electrons from each of the two oxygen atoms.
- Carbon transfers two electrons to each of the two oxygen atoms.
Answers
Answer:
- Carbon shares four of its electrons, and each oxygen shares two of its electrons.
Explanation:
Carbon needs 4 electrons to reach a full outer shell while oxygen needs 2 to reach a full outer shell.
What is a chemical property? Give an example.
Answers
Answer:
A chemical property example is fire.
Explanation:
Hope this helps!
Scientists made the following two observations about emission spectra: each element has a unique emission spectrum. atoms emit energy only at specific wavelengths. describe how the bohr model explains both of these observations.
Answers
In this model, electrons are found on unique levels and when jumping from one level to another, electrons emit light at a specific wavelength.
What is the Bohr model?The Bohr model is an atomic model describing the properties of atoms and their constituents (electrons).
This model states different atoms have specific levels of energy where electrons can be located.
In conclusion, in this model, electrons are found on unique levels and when jumping from one level to another, electrons emit light at a specific wavelength.
Learn more about the Bohr model here:
https://brainly.com/question/18002213
#SPJ1
Answer:
In the Bohr model, electrons can exist only in certain energy levels surrounding the atom. The energy levels in each atom are unique. When electrons jump from a higher energy level to a lower one, they emit light at a wavelength that corresponds to the energy difference between the levels.
Explanation:
Ed22
Compare and contrast nuetrons,protons, and electrons
Answers
Question 29 of 32
Why does a scientist form a hypothesis?
A. To prove a theory
B. To explain the data that are collected from an experiment
C. To explain his or her opinion about an observation
D. To provide a statement that can be tested with an experiment
Answers
A scientist form a hypothesis because he wants to : (D). To provide a statement that can be tested with an experiment
Meaning of hypothesisA hypothesis can be defined as a statement that is proposed by a scientist and needs to be tested by other scientist.
So in a simple statement, hypothesis in its raw state is an untested and unproven fact that is propagated by a scientist.
In conclusion, a scientist form a hypothesis because he wants to : To provide a statement that can be tested with an experiment
Learn more about hypothesis: https://brainly.com/question/11555274
#SPJ1
Based on table n, uranium-238 and uranium-235 have different
a)decay modes
b)half lives
c)number of protons
d)number of electrons
Answers
According to table N, the isotopes uranium-238 and uranium-235 have different half lives.
What are radioactive nuclides?Radioactive nuclides are those nuclides that are able to undergo radioactive decay. They have specific modes of decay that is peculiar to each isotope.
Hence, according to table N, the isotopes uranium-238 and uranium-235 have different half lives.
Learn more about uranium-238:https://brainly.com/question/9099776
#SPJ1
283.5 g of tin was heated from 25.6 to 107.5°C. How much energy was used to heat tin? (Specific heat capacity of Sn is 0.222 J/g x °C)
Answers
Answer: 5150 J
Explanation:
[tex]Q=mc \Delta T\\\\Q=(283.5)(0.222)(107.5-25.6)\\\\Q \approx \boxed{5150 \text{ J}}[/tex]
What kind of scientist would study how mistletoe harms trees
Answers
Answer:
A Dendrologist! They are the type of Scientist that studie trees.
Are these structure form a week bases?
Answers
Answer:
Explanation:
I have only answered the blue boxed parts:
Amines are weak bases because they can accept protons from other things.
Sugars is neither acidic nor basic (cuz its not ionic)
Carboxylic acid are weak acids (not bases) cuz they donate protons to other things.
What volume of a 0.295 M nitric acid solution is required to neutralize 24.8 mL of a 0.107 M potassium hydroxide solution
Answers
Answer: 9.00 mL
Explanation:
[tex]M_{A}V_{A}=M_{B}V_{B}\\(0.295)V_{A}=(0.107)(24.8)\\V_{A}=\frac{(0.107)(24.8)}{(0.295)} \approx \boxed{9.00 \text{ mL}}[/tex]
Question 2
1 p
White phosphorus ignites easily. This is an example of _____ property
- physical
- neither
- chemical
- both
Answers
Answer:
Chemical properties because if it was physical property then it will glow in dark
A sample of radioactive waste has a half-live of 40 years and an activity level of 4 curies. After how many years will the activity level of this sample be 0. 5 curies?
Answers
After 160 years, the activity level of the sample will be 0.5 curies.
What is half-life?Half life of any radioactive waste is the half decay of that product.
The formula is [tex]\dfrac{\lambda }{\lambda_1} = 2^\dfrac{a}{b}[/tex]
Where, λ is 4 cruies
λ1 is 0.5 cruies
b = 40 years
Putting the values in the equation
[tex]\dfrac{4}{0.5} = 2^\dfrac{a}{40}\\\\\\\dfrac{a}{40} = 4\\ = 160 years[/tex]
Thus, the correct option is 160 years.
Learn more about half-life
https://brainly.com/question/24710827
#SPJ4
Hereditary information is stored inside the
Answers
Answer:Hereditary information is contained in genes, located in the chromosomes of each cell. Each gene carries a single unit of information. An inherited trait of an individual can be determined by one or many genes, and a single gene can influence more than one trait.
Explanation:
list three properties of water that are related to hydrogen bonding
Answers
Fatty acids can be ____________ , meaning they contain double bonds, or they can be ____________ , meaning they contain no double bonds
Answers
what is the wavelength of an electromagnetic wave that has a frequency of
1.82 x 1018 hz in a vacuum? (the speed of light in a vacuum is 3.00 x 108
m/s.)
Answers
The wavelength of an electromagnetic wave that has a frequency of 1.82 x 10¹⁸ Hz in a vacuum is 1.65 × [tex]10^{-10}[/tex]m.
How to calculate wavelength?The wavelength of a wave can be calculated by dividing the speed of the wave by its frequency.
According to this question, a wave has a frequency of 1.82 x 10¹⁸ Hz in a vacuum and speed of light in a vacuum is 3.00 × 10⁸ m/s.
λ = [tex]\frac{v}{f}[/tex]
Wavelength (λ) = 3 × 10⁸ ÷ 1.82 × 10¹⁸
Wavelength (λ) = 1.65 × [tex]10^{-10}[/tex] m
Therefore, the wavelength of an electromagnetic wave that has a frequency of 1.82 x 10¹⁸ Hz in a vacuum is 1.65 × [tex]10^{-10}[/tex]m.
Learn more about wavelength here:
https://brainly.com/question/13533093
#SPJ1
In a mixture of oxygen and nitrogen, 80% of the gas pressure is exerted by the nitrogen. if the total pressure is 2.0 atm, what pressure does the oxygen exert?
Answers
0.4 atm pressure exerted by oxygen if 80% of the gas pressure is exerted by the nitrogen.
What is pressure?Pressure is defined to be the amount of force exerted per area
80% of pressure is exerted by nitrogen gas.
So, 20% of pressure will be exerted by oxygen gas.
20% of 2.0 atm = 0.4 atm
Hence, 0.4 atm pressure exerted by oxygen if 80% of the gas pressure is exerted by the nitrogen.
Learn more about pressure here:
https://brainly.com/question/15175692
#SPJ1
which of the following with the kinetic theory address? a
A. Vibrations in molecules
B. Oxidation states of Adams
C. Shapes of molecules
D. Energy levels and electrons
Answers
Answer:A
Explanation:
The kinetic molecular theory of matter states that: Matter is made up of particles that are constantly moving. All particles have energy, but the energy varies depending on the temperature the sample of matter is in.This is turn determines shearer the substance exists in the solid, liquid, or gaseous state.
Match the phase to the correct definition.
1.
Anaphase
2.
Prophase
3.
Metaphase
4.
Telophase
a.
Chromosomes line up at the center of the cell.
b.
The DNA is organized into connected rods called chromosomes.
c.
New cells begin to form.
d.
The chromosomes are separated and move to opposite sides of the cell.
Answers
Answer:
1.) Anaphase ------> D.) The chromosomes are separated and move to opposite sides of the cell.
2.) Prophase -------> B.) The DNA is organized into connected rods called chromosomes.
3.) Metaphase -------> A.) Chromosomes line up at the center of the cell.
4.) Telophase ------> C.) New cells begin to form.
What do esters aldehydes and ketones all have in common? (Look back at
table R and be specific!)
Answers
Based on the activity series provided, which reactants will form products? f > cl > br > i cui2 br2 right arrow. cl2 alf3 right arrow. br2 nacl right arrow. cuf2 i2
Answers
The reactants that will form products will be [tex]2CuI_2 + Br2[/tex].
Activity seriesElements at higher positions in the activity series will be able to displace those in lower positions in solutions.
Thus:
[tex]2CuI_2 + Br2 --- > 2CuBr +2 I_2[/tex] because Br is higher than I in the activity series.
Cl cannot displace F in [tex]Cl2 + AlF_3[/tex] because F is higher than Cl in the activity series.
Also, Cl is higher than Br in the activity series, thus, the reaction [tex]Br_2 + NaCl[/tex] cannot form products.
I cannot displace F, thus, [tex]CuF_2 + I_2[/tex] cannot form products.
More on activity series can be found here: https://brainly.com/question/13934381
#SPJ1
Can someone help??. This is super hard
Answers
111 cchuyttrfgh
tyujklkjhgt
Use the following equation to answer the following question
3 H2 + Na2 —-> 2 NH3
a) Determine the limiting reactant when 5.78 g of H2, and 6.28 g N2 are reacted to make NH3 you expect to get out of the chemical reaction.
Answers
Answer: nitrogen
Explanation:
Converting 5.78 g of hydrogen to moles, we know that the formula mass of hydrogen is about 2(1.00794)=2.01588 g/mol, so 5.78 grams is about 5.78/2.01588=2.867 mol.Converting 6.28 g of nitrogen to moles, we know that the formula mass of nitrogen is about 2(14.0067)=28.0134 g/mol, so 6.28 grams is about 6.28/28.0134 = 0.22417 mol.From the equation, we know that for every 3 moles of hydrogen consumed, 1 mole of nitrogen is consumed.
Considering the hydrogen, the reaction can occur 2.867/3=0.955 times.Considering the nitrogen, the reaction can occur 0.22417 times.Therefore, nitrogen is the limiting reactant.
If the half-life of a radioactive group of atoms is 100 years, then how old is the rock if there have been two half-lives? show your work
Answers
The rock will be 200 years old if there have been two half-lives.
What is the half life ?The half-life of a radioactive isotope refers to its decay period, which is the average lifetime of an atom before it disintegrates.
In this question (t½) of rock is 100 years, which means that after 100 years half of the sample would have decayed and half would be left as it is.
after two half lives or 200 years , the rock will be 200 years old.
To know more about Half Life
https://brainly.com/question/4318844
#SPJ4
Consider a 1.0-L sample of helium gas and a 1.0-L sample of argon gas, both at room temperature and atmospheric pressure. Do the atoms in the helium sample have the same average kinetic energy as the atoms in the argon sample
Answers
Yes, the atoms in the helium sample have the same average kinetic energy as the atoms in the argon sample.
What is Average Kinetic Energy ?The average kinetic energy of a gas molecule is defined as the product of half of the mass of each gas molecule and the square of the RMS speed.
The average kinetic energy equation is independent of Molar mass.
It's only a function of temperature.
So if they're at the same temperature they will have the same average kinetic energy.
Therefore, the atoms in the helium sample have the same average kinetic energy as the atoms in the argon sample
Learn more about kinetic Energy here ;
https://brainly.com/question/12669551
#SPJ1
For a given reaction, the activation energy is 63. 9 kj/mol. If the reaction rate constant is 4. 1 × 10–3 m–1s–1 at 32. 0ºc, what is the reaction rate constant at –5. 0 ºc? (r = 8. 314 j/k⋅mol)
Answers
The reaction rate constant at –5. 0 ºc is k2 is 24.3 KJ.
What is the activation energy?Activation energy is the minimum amount of energy required to carry out a reaction.
The formula is [tex]log \dfrac{k_2}{k_1} = \dfrac{Ea}{2.3R} \;( \dfrac{1}{T_1}- \dfrac{1}{T_2} )[/tex]
Given, K1 is [tex]4. 1 \times 10^3 m^-^1 s^-^1[/tex]
Temperature is 32
k2 is to find?
r = 8.314
Energy is 63.9
[tex]log \dfrac{k_2}{4. 1 \times 10^3 } = \dfrac{63.9 }{2.3\times 8.31} ( \dfrac{1}{32.0}- \dfrac{1}{-5.0} ) = 24.3 kj[/tex]
Thus, the correct option is k2 is 24.3 kJ
Learn more about activation energy
https://brainly.com/question/11334504
#SPJ4