define pressure snd state its SI units to​

Answer:

C. 157 bar/2270 psi

Explanation:

Calculation to determine what we should head back when either of our SPGs read

SPGs=200 bar -[200 bar-(50 bar + 20 bar)]÷1/3]

SPGs=200 bar-[(200 bar-70 bar)÷1/3]

SPGs=200 bar-(130 bar÷1/3)

SPGs=200 bar-43 bar

SPGs=157 bar/2270 psi

Therefore based on the above calculation we should head back when either of our SPGs read 157 bar/2270 psi

0.5Ω

Since different currents are passing through the resistors, then the resistors are most probably connected in parallel. This also means that the same voltage will pass across them.

Using Ohm's law, the voltage across a resistor in a circuit is given by;

V = I(R + r)            -----------(i)

For the 1ohm resistor, the voltage across it is given by;

Where;

I = current passing through the 1 ohm resistor = 0.6A

R = resistance of the 1 ohm resistor = 1Ω

r = internal resistance of the cell = r

Substitute these values into equation (i) as follows;

V = 0.6(1 + r)                 -------------------(ii)

For the 4.0ohm resistor, the voltage across it is given by;

Where;

I = current passing through the 4.0 ohms resistor = 0.2A

R = resistance of the 4.0 ohms resistor = 4.0Ω

r = internal resistance of the cell = r

Substitute these values into equation (i) as follows;

V = 0.2(4.0 + r)                 -------------------(iii)

Now solve equations (ii) and (iii) simultaneously;

V = 0.6(1 + r)

V = 0.2(4.0 + r)

Substitute the value of V in equation (ii) into equation (iii). Therefore, we have;

0.6(1 + r) = 0.2(4.0 + r)

Solve for r

0.6 + 0.6r = 0.8 + 0.2r

0.6r - 0.2r = 0.8 - 0.6

0.4r = 0.2

r = [tex]\frac{0.2}{0.4}[/tex]

r = 0.5

Therefore, the internal resistance of the cell is 0.5Ω

Answer:

Explanation:

This is a classic acceleration problem in one dimension. Use the equation

[tex]a=\frac{v_f-v_0}{t}[/tex] where a is the acceleration of he car, vf is the final velocity (and our unknown), v0 is the initial velocity, and t is time in seconds. Filling in:

[tex]2=\frac{v_f-22}{7}[/tex] and

14 = vf - 22 and

36 = vf (not quite right with the sig dig's but I'm guessing you're not really into the specifics much, judging by the acceleration and the time values)

the one you will most likely not find would be a hurricane

Explanation:

then can only be made when they are in a body of water

Answer:

weight of rod =weight of liquid displaced

mass of the rod ×g =mass of liquid displaced ×g

(g cancelled out)

mass of the rod =mass of liquid displaced

density of rod ×volume of rod =density of liqiud ×volume of liquid displaced

O×cross section area of rod ×height of rod =density of liquid ×Cross section area of rod ×height of rod under the surface

O×L=density of liquid ×(L-h)

then density of liquid =OL/(L-h) shown as required

The density of the liquid is given by =OL/L − h

Density is the ratio of mass of an object and its volume.

According to the Archimedes principle, weight of rod = weight of liquid displaced

mass of the rod ×g =mass of liquid displaced ×g

So, mass of the rod =mass of liquid displaced

Mass in terms of density is substituted,

density of rod × volume of rod =density of liquid ×volume of liquid displaced

O× cross section area of rod ×height of rod =density of liquid ×Cross section area of rod ×height of rod under the surface

O×L=density of liquid ×(L-h)

Then, density of liquid =OL/(L-h).

Learn more about density.

https://brainly.com/question/9215083

#SPJ2

Answer:

A. Endothermic reaction.

B. +150KJ.

C. 250KJ.

Explanation:

A. The graph represents endothermic reaction because the heat of the product is higher than the heat of the reactant.

B. Determination of the enthalpy change, ΔH for the reaction. This can be obtained as follow:

Heat of reactant (Hr) = 50KJ

Heat of product (Hp) = 200KJ

Enthalphy change (ΔH) =..?

Enthalphy change = Heat of product – Heat of reactant.

ΔH = Hp – Hr

ΔH = 200 – 50

ΔH = +150KJ

Therefore, the enthalphy change for the reaction is +150KJ

C. The activation energy for the reaction is the energy at the peak of the diagram.

From the diagram, the activation energy is 250KJ.

Answer:

Explanation:

Answer:

A

Explanation:

Answer:

HOPE IT HEPLED U !!!!

Explanation:

i think it's (C) They have different units ....

The answer is B. Mono and polyunsaturated fats because the other two are really harmful and they are not healthy whatsoever.

Explanation:

The hydraulic system works on the principle of Pascal's law which says that the pressure in an enclosed fluid is uniform in all the directions. ... As the pressure is same in all the direction, the smaller piston feels a smaller force and a large piston feels a large force.

Explanation:

distance = velocity * time

d = 37.9 * 118

distance = 4472.2

Answer:

A. tracert

Explanation:

Tracert is a computer diagnostic command which displays possible routes for delays in packets of Internet Protocol (IP). Tracert command will display results for route which is recorded round trip times of packet.

Answer:

6KW

Explanation:

The computation is shown below:

We know that

Work done= m ×g× h

Here

W= 300×10×10

= 30000 J

= 30 KJ

And

Power= Work done ÷time taken

 P = 30000 ÷ 5

= 6000W

= 6KW

The above represent the answer

Answer:

Quantity of charge = 0.8 Coulombs

Explanation:

Given the following data;

Current = 0.4 A

Time = 2 seconds

To find the quantity of electricity transferred;

Mathematically, the quantity of electricity (charge) passing through a conductor is given by the formula;

Quantity of charge = current * time

Substituting into the formula, we have;

Quantity of charge = 0.4 * 2

Quantity of charge = 0.8 Coulombs

Answer:

5.2 amps

Explanation:

V = I*R

I = V/R

I = 220/42

I = 5.2 amps

Answer:

5.2

Explanation:

because

[tex]i \frac{v}{r} [/tex]

220÷42=5.23

Answer:

- the Magnetic field lines will spread out of the north end of the magnet.

- the magnetic fields will three-dimensional and resemble a bubble.

Explanation:

- Usually, when drawing magnetic field lines, we start outwardly from the North pole to the South Pole. This same direction is also prevalent on the Earth due to the fact that the Earth functions as a giant magnet. Thus, one characteristic of the model is that the Magnetic field lines will spread out of the north end of the magnet.

- Another thing is that Magnetic field forces are usually driven as a result bubble like configuration which affects the objects that are in such a configuration. Thus, another characteristic of the model is that the magnetic fields will three-dimensional and resemble a bubble.

Answer:

the baby would still be 30 kg on the moon because that’s mass, not weight.

However, it will feel like 5 kg, because the acceleration is 1/6 and the force is 1/6 and the actual weight (product of mass and acceleration will be 1/6).

The child has a mass of 30 kg on earth and has one-sixth gravity on the moon will have a weight of 50 kg on the moon.

Gravity is a fundamental interaction that causes all objects with mass or energy to attract one another. The weakest of the four fundamental interactions is gravity, by far. The Moon's gravity causes sublunar tides in the oceans, just as gravity on Earth imparts weight to physical objects.

Given:

The mass of the child (m) = 30 kg,

The gravity on the moon (G) = 1/6 of the earth.

To calculate the weight of the child on the moon, use the formula given below,

F = m × a

Here

[tex]F[/tex] is the weight, [tex]m[/tex] is the mass and [tex]a[/tex] is the gravity on earth, gravity on earth [tex]10\ m/s^2[/tex].

Substitute the values

[tex]F=30*10/6[/tex]

[tex]F = 50\ kg[/tex]

Therefore, the weight of a child on the moon is 50 kg.

To know more about gravity:

https://brainly.com/question/9722860

#SPJ6

Answer:

5.76 m/s

Explanation:

Applying,

S = d/t............... Equation 1

Where S = speed, d = distance, t = time.

For circular motion,

d = 2πr............ Equation 2

Where r = radius of the circular track, π = pie

Substitute equation 2 into equation 1

S = 2πr/t.............. Equation 3

From the question,

Given: r = 110 m, t = 2 minutes = (2×60) = 120 s

Constant: π = 3.14

Substitute these values into equation 3

S = (2×3.14×110/120)

S = 690.8/120

S = 5.76 m/s

Answer:

They measured their train using their handspan

Answer:

A concave mirror is used.

Explanation:

start a fire using a mirror to focus sunlight.

A concave mirror is used as a light concentrator.

When the object is placed at the infinity, the image is formed at focus.

So, the light is focused at the focus and thus the fire is started.

Explanation:

The sun's gravitational force is very strong. If it were not, a planet would move in a straight line out into space. The sun's gravity pulls the planet toward the sun, which changes the straight line of direction into a curve. This keeps the planet moving in an orbit around the sun

Answer and Explanation:

The planets would move in a straight path since there would be no source that will be acting upon them (if the sun wasn't there).

Gravitational pull is the amount of force that an object emits. Due to the Sun having a larger mass and a larger gravitational pull, the planets orbit around it.  

If, for example, a house was bigger than everything, including planets and stuff, those things would orbit around the house.

A real life example is the moon orbiting Earth. The Earth has a greater magnitude and mass, so it is able to pull the Moon.

Right now the Sun is the external force, as its gravitational pull is moving the planets around. IF the sun was to magically disappear, the planets won't follow an orbit anymore, since there isn't a gravitational pull on them. This leads them to going in a straight line for possibly a couple years.

Eventually, the planets will stop going in a straight line and start to orbit each other, leading to the planets eventually crashing.

External Force = Sun's gravitational pull because of bigger mass

The planets themselves were created after the sun (though some minerals were created before the sun, but that's minerals and not the planet entirely). The sun gives the planet's their motion. The planets, however (though I'm not sure about mercury and Venus) are going super fast, fast enough to where they aren't being pulled into the sun, but not fast enough to go out of orbit.

If the sun goes out magically, the planets, actually yes will continue orbit due to them being in that motion at such a fast rate, but eventually when they are supposed to turn again, (like, to another part of the sun), the would go straight. Eventually, the will get into the orbit of something else and start going around that object's orbit, most likely outcome being that they crash.

The excess force from no gravitational pull will make the planets go in a straight path. Since nothing is acting upon it, the planets would move in a straight line. Imagine if you were on those spinning circle things, and then let go. You would go around it for like a second and then go immediately straight in one direction.

#teamtrees #PAW (Plant And Water)

Complete question:

(b) How much energy must be supplied to boil 2kg of water? providing that the specific latent heat of vaporization of water is 330 kJ/kg. The initial temperature of the water is 20 ⁰C

Answer:

The energy that must be supplied to boil the given mass of the water is 672,000 J

Explanation:

Given;

mass of water, m = 2 kg

heat of vaporization of water, L =  330 kJ/kg

initial temperature of water, t = 20 ⁰C

specific heat capacity of water, c = 4200 J/kg⁰C

Assuming no mass of the water is lost through vaporization, the energy needed to boil the given water is calculated as;

Q = mc(100 - 20)

Q = 2 x 4200 x (80)  

Q = 672,000 J

Q = 672,000 J

Q = 672,000 J

Therefore, the energy that must be supplied to boil the given mass of the water is 672,000 J

Answer:

a) Please find attached the required drawing of light passing through the lens

By the use of similar triangles;

The image distance from the lens = 26 cm

The height of the image = 14 cm

c) The image distance from the lens = 26 cm

The height of the image = 14 cm

Explanation:

Question;

a) Determine the image distance and the height of the image

b) Calculate the image position and height

The given parameters are;

The height of the object, h = 14 cm

The distance of the object from the mirror, u = 26 cm

The focal length of the mirror, f = 13 cm

The location of the object = 2 × The focal length

Therefore, given that the center of curvature ≈ 2 × The focal length, we have;

The location of the object ≈ The center of curvature of the lens

The diagram of the object, lens and image created with MS Visio is attached

From the diagram, it can be observed, using similar triangles, that the image distance from the lens = The object distance from the lens = 26 m

The height of the image = The height of the object - 14 cm

b) The lens equation is used for finding the image distance from the lens as follows;

[tex]\dfrac{1}{u} + \dfrac{1}{v} = \dfrac{1}{f}[/tex]

Where;

v = The image distance from the lens

We get;

[tex]v = \dfrac{u \times f}{u - f}[/tex]

Therefore;

[tex]v = \dfrac{26 \times 13}{26 - 13} = \dfrac{26 \times 13}{13} = 26[/tex]

The distance of the image from the lens, v = 26 cm

The magnification, M =v/u

∴ M = 26/26 = 1, therefore, the object and the image are the same size

Therefore;

The height of the image = The height of the object = 14 cm.

Answer:

flowers

Explanation:

i'm really not sure but i have this gut feeling its flowers

Answer:

Deceleration

Explanation:

The amount by which a speed or velocity decreases

Answer:

Negative Acceleration is called Deceleration.

Answer:

See explanation below

Explanation:

Capacitance is the amount of electric charge stored on a conductor and its SI unit is Farads (F).

Answer:

capacitance is the amount electric charges of a conductor, its si is farads

Bye , :-)

Answer:

The ratio of the amplitudes of siren to dishwasher is 10.

Explanation:

loudness of dishwasher = 40 dB

loudness of siren = 60 dB

let the intensity of dishwasher is I an the intensity of siren is I'.

Use the formula of intensity and decibels.

[tex]dB = 10 log\frac{I}{I_o}\\\\40=10 log\frac{I}{I_o}\\\\4 = log\frac{I}{I_o}\\\\I = 10000 I_o[/tex]

And

[tex]60=10 log\frac{I'}{I_o}\\\\60 = log\frac{I'}{I_o}\\\\I' = 1000000 I_o[/tex]

The intensity if proportional to the amplitude.

[tex]\frac{A'}{A}=\sqrt\frac{1000000}{10000}\\\\\frac{A'}{A}= 10[/tex]

Answer:

22.4%

Explanation:

The plane is 300000 kg

It is 11000 meters about the earth's surface.

g = 9.81

PE = mgh

PE = 300000 * 9.81 * 11000

PE = 3.24* 10^10

The Kinetic Energy

KE = 1/2  m * v^2

m = 300000

v = 250 m/s

KE = 1/2 300000 * (250 m/s)^2

KE = 9.375 * 10^9

Total Energy = 3.24 * 10^10 + 9.375 * 10^9

Total Energy = 4.17 * 10^10

9.375 * 10^9

===========    * 100 % = 22.44 %

4.17 * 10^10

Answer:

The correct answer is "20 Volts".

Explanation:

Given:

Heat,

H = 100 J

Resistance,

R = 4 Ω

As we know,

⇒ [tex]P=\frac{v^2}{R}[/tex]

By putting the values, we get

⇒ [tex]100=\frac{v^2}{4}[/tex]

⇒  [tex]v^2=100\times 4[/tex]

⇒       [tex]=400[/tex]

⇒    [tex]v=\sqrt{400}[/tex]

⇒       [tex]=20 \ volts[/tex]