Develop a MATLAB program that will solve a system of linear equations using Determinants: *Cramer's Rule* for a (3x4) matrix.
DO NOT use the Matrix Solver functions contained in MATLAB.

The incident at the Dixie Cold Storage Company demonstrates that the water reactivity hazard of ammonia is not always fully understood.

What is water reactivity hazard?

Water-reactive substances are chemicals that spontaneously react with water or damp air to produce hydrogen gas or other flammable gases. They may ignite or explode if exposed to moisture, water, or humid air. For instance, alkali metals, such as sodium and potassium, are highly reactive with water and can spontaneously ignite when exposed to even a small amount of water. It should be noted that ammonia (NH3) is one such water-reactive substance. Water-reactive substances, such as ammonia, can pose significant health and safety risks if not properly handled and managed.

The ammonia gas is exceptionally toxic and may cause burns or other injuries to the eyes, skin, and respiratory tract. Ammonia inhalation may cause serious respiratory problems or even death. Therefore, it is critical to have appropriate protection when dealing with ammonia to prevent accidental injury or illness. The incident at the Dixie Cold Storage Company demonstrates that the water reactivity hazard of ammonia is not always fully understood. Water-reactive substances are chemicals that spontaneously react with water or damp air to produce hydrogen gas or other flammable gases.

Learn more about Cold Storage:

https://brainly.com/question/29887072

#SPJ11

The mass of air in the tank is 0.05597 kg.

Given data:

Volume of air (V) = 2 m³

Temperature (T) = -93°C = -93 + 273.15 = 180.15 K

Gage pressure (P) = 1.4 MPa = 1.4 * 10⁶ Pa

To determine the mass of air, we can use the ideal gas law equation [tex]PV = nRT[/tex]

We will calculate the number of moles of air using the ideal gas law: n = PV / RT

Substituting values:

n = (1.4 * 10⁶ Pa * 2 m³) / (8.314 J/(mol·K) * 180.15 K)

n ≈ 1.933 mol

Given: The molar mass of air can be approximated as 28.97 g/mol.

Mass of air = n * Molar mass

Mass of air = 1.933 mol * 28.97 g/mol

Mass of air ≈ 55.97 g

Converting grams to kilograms:

Mass of air = 0.05597 kg.

Read more about mass

brainly.com/question/19626802

#SPJ4

Answer:

I think the answer is B. Black

Answer:

Which option identifies the step of the implementation phase represented in the following scenario?

A company in the gaming industry decides to integrate movement controls in its newest hardware release. It sends an online survey to interactive gamers to identify their highest priorities.

establishing a process and budget

using communication tools

building and assembling a team

setting up a change order process

Explanation:

#carryonml

Answer:

using communication tools

Explanation:

The correct answer is using communication tools. Communication tools such as online surveys help project teams identify customers’ wants and needs.

After 4 clock pulses, the FF outputs will be QA=1, QB=1, QC=0.

A shift register is a type of sequential logic circuit that can store and shift data. It consists of a series of flip-flops (FFs) connected in a chain, where each FF stores one bit of data.

In the given scenario, all FFs are initially set to 0. With each clock pulse, the data stored in the shift register moves one position to the right. The data that gets shifted out of the last FF is lost, and a new data bit is shifted into the first FF.

After 4 clock pulses, the data has shifted through the FFs. Let's track the changes:

- Initially, all FFs are set to 0.

- After the first clock pulse, the data bit enters the first FF, and all other FFs also shift to the right. The output of QA becomes 0 (shifted from the previous state), QB becomes 0 (shifted from QA's previous state), and QC becomes 0 (shifted from QB's previous state).

- After the second clock pulse, the data bit enters the first FF again, shifting the previous values further. The output of QA becomes 1 (new data bit), QB becomes 0 (shifted from QA's previous state), and QC becomes 0 (shifted from QB's previous state).

- After the third clock pulse, the pattern repeats. The output of QA becomes 1 (shifted from the previous state), QB becomes 1 (shifted from QA's previous state), and QC becomes 0 (shifted from QB's previous state).

- After the fourth clock pulse, the pattern continues to shift. The output of QA becomes 1 (shifted from the previous state), QB becomes 1 (shifted from QA's previous state), and QC becomes 0 (shifted from QB's previous state).

Therefore, after 4 clock pulses, the final state of the FF outputs will be QA = 1, QB = 1, and QC = 0.

This represents the data shifting through the shift register over the course of 4 clock pulses. Each FF output is the result of the previous FF's output being shifted to the right.

Learn more about outputs here:-

https://brainly.com/question/17405663
#SPJ11

Yes, the toll bridge should be constructed because the Benefit-Cost Ratio (B-C ratio) is 13.41, which is greater than 1. This indicates that the present value of benefits outweighs the present value of costs, making it a financially viable project.

To determine whether the toll bridge should be constructed, we need to calculate the Benefit-Cost Ratio (B-C ratio) and compare it to the threshold value. The B-C ratio is calculated by dividing the present value of benefits by the present value of costs.

First, let's calculate the present value of benefits. We will consider the revenues generated from tolls and the savings from resurfacing costs. The anticipated annual increase in toll revenue due to increased traffic will be considered using a geometric gradient series.

PV of Toll Revenues:

PV_revenues = [R * (1 - (1 + g)^(-n))] / (r - g)

where R = Initial revenue, g = growth rate, n = number of years, r = discount rate

PV_revenues = [2,500,000 * (1 - (1 + 0.0225)^(-30))] / (0.10 - 0.0225)

PV_revenues ≈ 52,551,529.94

PV of Resurfacing Costs:

PV_resurfacing = C * (1 - (1 + r)^(-n)) / (r * (1 + r)^(-n))

where C = Resurfacing cost, r = discount rate, n = number of years

PV_resurfacing = 1,250,000 * (1 - (1 + 0.10)^(-30)) / (0.10 * (1 + 0.10)^(-30))

PV_resurfacing ≈ 10,594,041.35

Next, let's calculate the present value of costs, which includes the initial investment cost and the annual operating and maintenance costs.

PV of Investment Cost:

PV_investment = C / (1 + r)^n

where C = Investment cost, r = discount rate, n = number of years

PV_investment = 17,000,000 / (1 + 0.10)^30

PV_investment ≈ 2,150,897.84

PV of Operating and Maintenance Costs:

PV_operating = [C * (1 - (1 + r)^(-n))] / r

where C = Operating cost, r = discount rate, n = number of years

PV_operating = 325,000 * (1 - (1 + 0.10)^(-30)) / 0.10

PV_operating ≈ 2,239,162.42

Now, we can calculate the B-C ratio:

B-C ratio = (PV_revenues + PV_resurfacing) / (PV_investment + PV_operating)

B-C ratio = (52,551,529.94 + 10,594,041.35) / (2,150,897.84 + 2,239,162.42)

B-C ratio ≈ 13.41

Since the B-C ratio is greater than 1, the toll bridge project should be constructed.

Learn more about revenue here:

brainly.com/question/21639689

#SPJ4

To create a navigation menu with links to each page, you can use HTML <a> tags within an unordered list <ul>.

Here's an example of how you can create the navigation menu:

<ul>

 <li><a href="start.html">Home</a></li>

 <li><a href="products.html">Products</a></li>

 <li><a href="blog.html">Contact us</a></li>

</ul>

Each <li> element represents a list item, and within it, the <a> tag is used to create a hyperlink. The href attribute specifies the URL of the corresponding page.

Please note that the provided code snippet is a sample implementation. Make sure to replace "start.html", "products.html", and "blog.html" with the actual file names or URLs of your webpages.

Once you add this code to your webpage, you should see a navigation menu with the links to the specified pages: "Home", "Products", and "Contact us".

Learn more about navigation here

https://brainly.com/question/30633995

#SPJ11

The solution to the given recurrence relation subject to the basis step is B(n) = 5 x 3^(n-1) is the answer.

Solving the given recurrence relation B(1) = 5 B(n) = 3B(n - 1) for n greater than or equal to 2, subject to the basic step.

For the basis step, we are given B(1) = 5.

So, the first element of the sequence is 5.

Now, let's find the second element of the sequence B(2) using the given recurrence relation.

B(2) = 3B(1) = 3 x 5 = 15.

We know that B(1) = 5 and B(2) = 15.

Using the recurrence relation, we can find the next terms of the sequence as follows: B(3) = 3B(2) = 3 x 15 = 45B(4) = 3B(3) = 3 x 45 = 135B(5) = 3B(4) = 3 x 135 = 405 And so on.

We can see that each term of the sequence is three times the previous term.

So, the sequence is an exponential sequence of the form B(n) = a x 3^(n-1), where a is the first term of the sequence.

Based on the values of the first two terms, we have B(1) = 5 and B(2) = 15.

Using these values, we can find the value of 'a' as follows: 5 = a x 3^(1-1) => a = 5.

So, the sequence is given by the formula B(n) = 5 x 3^(n-1).

Therefore, the solution to the given recurrence relation subject to the basis step is B(n) = 5 x 3^(n-1).

know more about recurrence relation

https://brainly.com/question/30895268

#SPJ11

The statement that causes a ValueError to occur is "raise ValueError". Therefore, the correct option is B. raise ValueError.

Python raise keyword is used to raise an exception, which is an error that is raised under particular conditions, for example, in response to an invalid input data type that your code cannot process. It is utilized to raise an exception manually when a specific condition is not met. Python has several built-in exceptions that can be raised to indicate that an error has occurred. A common exception raised by Python is ValueError, which is raised when the type of data being processed is incorrect, and it cannot be converted to the desired format.

In Python, there are some terms that are used for Exception Handling. These are:try, except, else, finally. The 'try' statement is used for Error Checking. An exception is an error that occurs during execution of a program. They can be handled in Python using the 'try' statement. The 'except' statement catches the exceptions raised during the execution of a try block. Here, ValueError refers to a specific type of exception that you want to catch and handle. The 'raise' keyword allows you to raise an exception explicitly and on purpose. It is used to throw an exception when a certain condition is not met. Therefore, the correct option is B. raise ValueError.

Learn more about ValueError here:

https://brainly.com/question/30762919

#SPJ11

Solar panels/systems require several technical specifications and graphic outline. Below are the technical specifications and graphic outline for solar panels/systems:Technical Specifications for Solar Panels/Systems1. Wattage: This is the most common technical specification for solar panels, and it denotes the power rating of a solar panel. Wattage determines how much energy the solar panel can produce.

The wattage of a solar panel is measured in watts (W).2. Efficiency: The efficiency of a solar panel is the percentage of sunlight that the panel can convert into electricity. The higher the efficiency, the more energy a panel can produce. Efficiency is measured as a percentage.3. Voltage: The voltage of a solar panel is the electrical potential difference between two points on the panel. It is measured in volts (V).4. Current: The current of a solar panel is the flow of electricity through the panel. It is measured in amperes (A).5. Temperature coefficient: The temperature coefficient of a solar panel is the rate at which its power output decreases as the temperature increases.Graphic Outline for Solar Panels/Systems1. Roof type: The graphic outline for solar panels/systems requires an accurate depiction of the roof type where the panels will be installed. This includes identifying the pitch, direction, and slope of the roof.2. Panel layout: This refers to the arrangement of the solar panels on the roof. The graphic outline should include the number of panels, their size, and orientation.3. Electrical layout: The electrical layout depicts how the solar panels will be connected to the electrical system of the building. This includes wiring diagrams, junction boxes, and inverters.4. Structural details: Structural details depict how the solar panels will be mounted on the roof. This includes the type of mounting system used, the materials used, and the weight distribution of the panels.5. Shading analysis: The shading analysis shows any obstacles that may block the sunlight from reaching the solar panels. It also shows the impact of shadows on the output of the solar panels.In conclusion, the technical specifications and graphic outline for solar panels/systems are critical in ensuring that solar panels are installed correctly and safely. The technical specifications ensure that the solar panels produce the required amount of energy while the graphic outline ensures that the panels are installed in the right place and in the right way.

To know more about Solar Panels/Systems visit:

https://brainly.com/question/14117766

#SPJ11

The correct option is a. The Kingsbury Agreement.

The Kingsbury Agreement allowed third party mechanical devices to be attached directly on AT&T telephone sets. The Kingsbury Agreement is an agreement between the Bell System and the United States Department of Justice, under which the Bell System agreed to divest itself of its local exchange service operating companies. It was signed in 1982. AT&T had agreed to divest itself of its local exchange service operating companies as part of the settlement of an antitrust lawsuit against the company.The agreement also allowed for the manufacture of third-party devices that could be attached to AT&T telephone sets, providing a new market for companies that had previously been shut out of the telecommunications industry. This was a significant change, as AT&T had previously required customers to lease telephones from the company rather than purchase them outright. The Kingsbury Agreement opened up the market for telephone equipment and allowed for increased competition in the industry. In conclusion, the correct option is a. The Kingsbury Agreement.

Learn more about mechanical devices here,  

https://brainly.com/question/32328139

#SPJ11

9514 1404 393

Answer:

  1

Explanation:

Only one such circle can be drawn. The diameter of the 10" circle will be a radius of the semicircle. In order for the 10" circle to be wholly contained, the flat side of the semicircle must be tangent to the 10" circle. There is only one position in the figure where that can happen. (see attached).

Answer:

Some questions on heat transfer with answers:

1. What is heat transfer and what are the three modes of heat transfer?

Heat transfer is the process of energy transfer between objects or regions due to temperature differences. The three modes of heat transfer are conduction, convection, and radiation.

Conduction refers to the transfer of heat through direct contact between objects or particles. Convection involves the transfer of heat through the movement of fluids (liquids or gases).

Radiation is the transfer of heat through electromagnetic waves, such as infrared radiation.

2. How does conduction occur and what factors affect the rate of conduction?

Conduction occurs when heat is transferred from a region of higher temperature to a region of lower temperature within a solid or between solids in contact. The rate of conduction is influenced by factors such as the thermal conductivity of the material, the temperature difference across the material, the cross-sectional area of the material, and the distance over which heat is transferred.

3. What is the difference between natural convection and forced convection?

Natural convection is the mode of heat transfer that occurs due to density differences caused by temperature variations. It involves the transfer of heat through the movement of fluids caused by buoyancy effects, such as hot air rising and cold air sinking.

Forced convection, on the other hand, is the mode of heat transfer that occurs when an external force, such as a fan or pump, is used to actively circulate the fluid and enhance the heat transfer rate.

4. How does radiation heat transfer work and what factors affect the rate of radiation?

Radiation heat transfer occurs through electromagnetic waves without the need for a medium. It can occur between objects at different temperatures, even in a vacuum.

The rate of radiation heat transfer is influenced by factors such as the emissivity of the objects (a measure of their ability to emit radiation), their temperature, the surface area and geometry of the objects, and the presence of intervening materials that may absorb or reflect the radiation.

5. How is heat transfer important in everyday life and engineering applications?

Heat transfer plays a crucial role in various aspects of everyday life and engineering applications. It is involved in processes like cooking, heating and cooling systems, power generation, refrigeration, and many industrial processes.

Understanding heat transfer allows engineers to design efficient heat exchangers, thermal insulation systems, and cooling mechanisms. It is also essential in fields such as material science, aerospace engineering, electronics cooling, and environmental studies, enabling the efficient transfer and control of thermal energy for practical applications.

For more questions on electromagnetic waves, click on:

https://brainly.com/question/31492825

#SPJ8

The sum of the two binary numbers is not zero, which is why the sign-magnitude method for representing signed numbers is not used in most computers.

The sign-magnitude method for representing signed numbers is not used in most computers because of its limitation. The sign-magnitude representation for numbers has a few limitations, which is why it is not used in most computers. One of the biggest drawbacks is that it requires two representations for zero, which makes arithmetic operations difficult. When performing arithmetic operations on numbers represented using the sign-magnitude method, we must first examine the signs of the operands to determine the operation to perform. We'll look at the steps to represent +12 in eight bits using the sign-magnitude form and represent -12 in eight bits using the sign-magnitude form. Finally, we'll add the two binary numbers and note that the sum does not look like zero.To represent +12 in eight bits using the sign-magnitude form, follow the below steps:Step 1: Convert the absolute value of 12 into binary form.1100 is the binary representation of 12.Step 2: Since the number is positive, the leftmost bit must be 0. As a result, the final binary representation is 01100.01100 is the sign-magnitude representation of +12.To represent -12 in eight bits using the sign-magnitude form, follow the below steps:Step 1: Convert the absolute value of 12 into binary form.1100 is the binary representation of 12.Step 2: Since the number is negative, the leftmost bit must be 1. As a result, the final binary representation is 11100.11100 is the sign-magnitude representation of -12.Adding the two binary numbers gives:01100+11100=101000As we can see, the sum of the two binary numbers is not zero, which is why the sign-magnitude method for representing signed numbers is not used in most computers.

Learn more about binary numbers here:

https://brainly.com/question/28222245

#SPJ11

Answer:

1791 secs  ≈ 29.85 minutes

Explanation:

( Initial temperature of slab )  T1 = 300° C

temperature of water ( Ts ) = 25°C

T2 ( final temp of slab ) = 50°C

distance between slab and water jet = 25 mm

Determine how long it will take to reach T2

First calculate the thermal diffusivity

∝  = 50 / ( 7800 * 480 ) = 1.34 * 10^-5 m^2/s

next express Temp as a function of time

T( 25 mm , t ) = 50°C

next calculate the time required for the slab to reach 50°C at a distance of 25mm

attached below is the remaining part of the detailed solution

Here's a function called Close Enough which takes a const reference to a vector of strings and an int. This function is used to check if there are two adjacent strings in a list that are very similar to each other by determining the number of characters that can be different between any two strings next to each other.

The function starts by iterating through the vector of strings from the first to the second to last string. For each string, it then counts the number of differences between it and the next string by comparing the characters at each position.

If the number of differences is less than or equal to the given integer n, the function returns the index of the current string. If there is no such index, the function returns -1.

To know more about vector visit:

https://brainly.com/question/24256726

#SPJ11

The average power of the circuit is option A) 91 W.

To calculate the average power of the LRC AC circuit, we can use the formula:

Average Power = RMS Voltage × RMS Current × Power Factor

First, let's find the RMS (Root Mean Square) values of the voltage and current. The RMS value is equal to the peak value divided by the square root of 2:

RMS Voltage = Peak Voltage / √2

RMS Current = Peak Current / √2

Given:

Peak Voltage = 110 V

Peak Current = 2.00 A

RMS Voltage = 110 V / √2 ≈ 77.78 V

RMS Current = 2.00 A / √2 ≈ 1.41 A

Next, let's calculate the power factor. The power factor is the cosine of the phase angle between the voltage and current:

Power Factor = cos(θ)

Given:

Phase angle (θ) = 35 degrees

Power Factor = cos(35°) ≈ 0.819

Now, we can calculate the average power using the formula:

Average Power = RMS Voltage × RMS Current × Power Factor

Average Power = 77.78 V × 1.41 A × 0.819 ≈ 91 W

Therefore, the average power of the circuit is approximately 91 W.

Learn more about average power here:-

https://brainly.com/question/31040796
#SPJ11

1. To list all comments by the user with ID 678, in chronological order of comment creation with the most recent on top, we can use the following SQL query:

SELECT p.title, c.comment_text, c.created_dateFROM posts pINNER JOIN comments c ON p.post_id = c.post_idWHERE c.user_id = 678ORDER BY c.created_date DESC;

Here, we are selecting the post title, comment text, and created date from the posts and comments tables. We are then joining these tables on the post_id column to ensure that we only get comments that are associated with a particular post. We then filter the results to only show comments where the user_id is 678. Finally, we sort the results in descending order of created_date so that the most recent comment appears on top.

2. To compute the total number of upvotes and downvotes for each post, we can use the following SQL query: SELECT p.title, u.name, SUM(v.upvote) AS upvotes, SUM(v.downvote) AS downvotes FROM posts pINNER JOIN users u ON p.user_id = u.user_idINNER JOIN votes v ON p.post_id = v.post_idGROUP BY p.post_id;

Here, we are selecting the post title, user name, and the sum of upvotes and downvotes for each post. We are joining the posts, users, and votes tables on their respective keys to ensure that we are only counting votes for a particular post. We are also grouping the results by post_id so that we get one row per post.

3. To show the title of all posts created in March 2022, we can use the following SQL query:

SELECT title FROM postsWHERE created_date >= '2022-03-01' AND created_date < '2022-04-01';

Here, we are selecting the title column from the posts table. We are then filtering the results to only show posts where the created_date is in March 2022. We are using the >= and < operators to ensure that we get all posts created on March.

4. To show the name of all users who created a post in March 2022, we can use the following SQL query:

SELECT DISTINCT u.nameFROM posts pINNER JOIN users u ON p.user_id = u.user_idWHERE p.created_date >= '2022-03-01' AND p.created_date < '2022-04-01';

Here, we are selecting the distinct user names from the user's table. We are then joining the posts and users tables on the user_id column to ensure that we only get users who created a post. We are filtering the results to only show posts created in March 2022.

5. To show the name of all users, along with the number of posts each user created in 2022, we can use the following SQL query:

SELECT u.name, COUNT(p.post_id) AS num_postsFROM users uLEFT JOIN posts p ON u.user_id = p.user_idWHERE p.created_date >= '2022-01-01' AND p.created_date < '2023-01-01'GROUP BY u.user_id;

Here, we are selecting the user name and the count of posts created by that user. We are using a left join to ensure that we get all users, even if they haven't created any posts in 2022. We are then filtering the results to only show posts created in 2022. We are grouping the results by user_id to ensure that we get one row per user.

To know more about SQL queries,

https://brainly.com/question/27851066

#SPJ11

The given plan shows the layout of shear walls labeled as A, B, C, D, and E, along with a rigid diaphragm.

It is mentioned that a lateral load with a magnitude of P = 360,000 pounds (lb) is applied along the edge of Wall C.

To determine the lateral force resisted by Wall C, we need additional information such as the distribution of the lateral load among the walls or any other relevant factors. Without this information, we cannot accurately calculate the specific force resisted by Wall C.

However, it's important to note that in a building structure, the distribution of lateral forces among shear walls is typically based on factors like their relative stiffness, location, and overall structural design. The force distribution may not solely depend on the location of the applied load.

To accurately determine the lateral force resisted by Wall C or any other wall, it is necessary to consider the specific design and engineering calculations based on the structural analysis and load distribution criteria for the given building or project.

Learn more about diaphragm here

https://brainly.com/question/31185329

#SPJ11

To create a scenario summary report showing result values for cells K6, K12, and K13 in the report, follow the steps below:

Step 1: First, select the cells (K6, K12, and K13) that you want to show in the scenario summary report.

Step 2: Click on the "What-If Analysis" option in the "Data" tab.

Step 3: Select the "Scenario Manager" option in the "What-If Analysis" menu.

Step 4: In the "Scenario Manager" window, click on the "Add" button to create a new scenario.

Step 5: In the "Add Scenario" window, enter a name for the scenario in the "Scenario Name" box.

Step 6: Select the cells that you want to change in the scenario by clicking on the "Changing cells" box and then selecting the cells in the worksheet. Click on the "OK" button.

Step 7: In the "Scenario Manager" window, select the scenario that you have just created and click on the "Show" button.

Step 8: In the "Scenario Values" window, enter the values that you want to use for the changing cells in the scenario. Click on the "OK" button.

Step 9: Click on the "Summary" button in the "Scenario Manager" window to create a scenario summary report that shows the result values for cells K6, K12, and K13 in the report.

You can customize the scenario summary report as needed by using the formatting options in Excel.

Learn more about scenario summary report here:

https://brainly.com/question/30692755

#SPJ11

Answer:

Answer is A

Explanation:

Doesn't break 360 degrees of bend.

The bend that can be used in conduit run is one 90-degree, three 45-degree, and four 30-degree.

Bend that can be used in conduit run is equal or less than 360 degree.

So, One 90-degree, three 45-degree, and four 30-degree is the bend that can be used in conduit run.

Learn more: brainly.com/question/21199524

The reaction of machine operators to the 'future state' value stream can vary depending on several factors, including their level of involvement in the improvement process, their understanding of the changes, and their perception of the impact on their work.

A Machine Operator is a professional who is responsible for operating their assigned machinery. They ensure their machine runs smoothly, works at capacity without issue and is appropriately maintained.

Some machine operators may embrace the 'future state' value stream and be enthusiastic about the proposed improvements. They may appreciate the potential benefits, such as increased efficiency, reduced waste, and improved working conditions. These operators may actively engage in the implementation of the changes, collaborate with others, and provide valuable input based on their expertise.

Know more about machine operators here:

https://brainly.com/question/32451011

#SPJ11

Answer:

6.27 × 10⁻⁴

Explanation:

Relative roughness, k = ε/D where ε = absolute roughness = 0.0025 mm and D = internal pipe diameter = 0.157 in = 0.157 × 25.4 mm = 3.9878 mm

So, k = ε/D

= 0.0025 mm/3.9878 mm

= 6.27 × 10⁻⁴

The relative pipe roughness for a plastic pipe will be:

"6.27 × 10⁻⁴".

According to the question,

Absolute roughness, ε = 0.0025 mm

Internal pipe diameter, D = 0.157 in or,

                                          = 0.157 × 25.4 mm

                                          = 3.9878 mm

We know that,

The relative roughness be:

→ k = [tex]\frac{Absolute \ roughness}{Diameter}[/tex]

or,

   k = [tex]\frac{\varepsilon }{D}[/tex]

By substituting the above values,

      = [tex]\frac{0.0025}{3.9878}[/tex]

      = 6.27 × 10⁻⁴

Thus the above approach is correct.

Find out more information about diameter will be:

https://brainly.com/question/13100709

The value of the linear resistance R is 229.7 Ω (ohms).

Given the following data,

The initial level of liquid in the tank = 5 m

Time taken to empty the tank = 200 s

Let's assume the linear resistance R

The formula for the volume flow rate of liquid through the outlet is given by,

Q = (P-Po)/R ...............(i)

where P is the pressure of the liquid in the tank, Po is the pressure of the atmosphere, and Q is the volume flow rate.

Since the liquid level in the tank is initially 5 m, the pressure of the liquid in the tank is given by,

P = ρgh + Po

where ρ = 1,000 kg/m³, g = 9.8 m/s², h = 5 m and Po = 1.01 × 10⁵ N/m²

Pressure P = (1,000 × 9.8 × 5) + (1.01 × 10⁵) = 1,049,010 N/m²

Let V be the volume of the liquid in the tank.

Let dV/dt be the rate of change of volume of the liquid in the tank.

From the information given in the problem, we can write,

dV/dt = Q ...........(ii)

Where Q is the volume flow rate of liquid through the outlet. When the outlet is opened, the volume of liquid decreases at a constant rate. Hence,

dV/dt = -k

where k is a positive constant. Thus,

dV/dt = -k = Q

Combining equations (i) and (ii), we get,

(P-Po)/R = -k

where k is a positive constant.

Substituting the values of P, Po, and R, we get,(1,049,010-1.01 × 10⁵)/R = -k

So, k = (1,049,010-1.01 × 10⁵)/R = 1008905/R

The percentage of liquid remaining after time t is given by, (V(t)/V) × 100%

Since the tank empties by 98% in 200 seconds, we can write,

V(200)/V × 100% = 2%0.02V = V(0) - Q(0) × 200

where V(0) = 5πr² and Q(0) is the initial volume flow rate.

Substituting the values of V(0) and Q(0), we get,

0.02(5πr²) = (1,049,010-1.01 × 10⁵) × πr²/R × 200Thus, R = (πr² × 200 × 0.02 × 1008905)/(1,049,010-1.01 × 10⁵)R = 229.7 Ω

Therefore, the value of the linear resistance R is 229.7 Ω (ohms).

learn more about linear resistance here:

https://brainly.com/question/31824202

3SPJ11

In Python, it is easy to reverse a list using the reverse() method. However, to reverse a list using a function, we can use the slicing technique. Let's look at an example of how to reverse a simple list using a Python function. Example of a function that returns the reverse of its simple list parameter:```def reverse_list(lst): return lst[::-1]```

Definition: A list is a mutable data type, meaning it can be altered or modified. The elements in a list are ordered, and it allows for duplicate elements. A list is created by enclosing elements within square brackets[].

Slicing is a technique used to extract a particular set of values from an iterable, such as a list or a tuple. It is a type of operator that extracts part of a string, tuple, or list based on its index. Example of a function that returns the reverse of its simple list parameter:```def reverse_list(lst): return lst[::-1]``` Here, we are defining a function called reverse_list(), which takes in a list as a parameter. The function returns the reverse of the given list using the slicing technique. To reverse a list, we use the slicing technique with step size -1, which returns a new list with all the elements in reverse order.

The slicing technique is used to extract a portion of a list. In this case, lst[::-1] returns a new list with all the elements in reverse order. In other words, it extracts a portion of the list from the first element to the last element with a step of -1, which means it goes in reverse order. Here's an example of how to use this function:'''my_list = [1, 2, 3, 4, 5]print(reverse_list(my_list))```

Output:[5, 4, 3, 2, 1]. The output of the above example code shows the reverse order of the given list, which is [5, 4, 3, 2, 1]. The function has successfully reversed the list.

know more about reverse_list(),

https://brainly.com/question/23516428

#SPJ11

The required correct answer is b. binarizer = Binarizer(threshold = 50).fit(array)

Explanation: Binarizer in sklearn.preprocessing is a transformation function used to convert numeric data into binary form. A threshold value is used to specify a cut-off point. This is a binary classification method in which values above the threshold are classified as 1 and values below the threshold are classified as 0.The statement below shows how binarizer works in this case:binarizer = Binarizer(threshold = 50).fit(array)Here, the threshold is set to 50, meaning that all values above 50 will be set to 1, while all values below 50 will be set to 0. The array is then fitted into the binarizer object.To transform the array into binary form, binarizer.transform(array) is called. In essence, this statement applies the binarizer function to the array object.

Learn more about array here https://brainly.in/question/13971324

#SPJ11

To calculate the position of the element myArray[3][2] using pointer arithmetic, you can use the following formula:

[tex]*(myArray[0] + 3 * 9 + 2)[/tex]

In a 2-dimensional array in C, the elements are stored in contiguous memory locations row-wise. So, the number of rows (4 in this case) determines the stride of the array.

To calculate the position of myArray[3][2], we need to take into account the row stride and the column index. Here's the step-by-step explanation:

Since myArray is a 2-dimensional array, the expression myArray[0] represents the memory location of the first element in the first row.

To access the element myArray[3][2], we need to move 3 rows down and 2 columns to the right from the starting position.

Considering each row has 9 elements (as given in the declaration), we multiply the number of rows (3) by the number of columns (9) to determine the offset caused by moving 3 rows down. This gives us 3 * 9.

Finally, we add the column index (2) to the offset obtained in the previous step to account for the 2 columns we need to move to the right.

By dereferencing the calculated memory location using the * operator, we can access the value stored at myArray[3][2].

Putting it all together, the pointer arithmetic expression to calculate the position of myArray[3][2] would be [tex]*(myArray[0] + 3 * 9 + 2)[/tex]

To learn more about Array: https://brainly.com/question/28061186

#SPJ11

To plot [1, 10, 100, 1000, 10000] (along the x-axis) and (2,3,5,8, 13] (along the y-axis) as an x-axis semilog plot in MATLAB,

we can use the following command:```plot([1, 10, 100, 1000, 10000], [2,3,5,8, 13], 'd-'); set(gca,'XScale','log');``` This will plot the data points as diamond-shaped symbols and use a logarithmic scale on the x-axis. The 'd-' argument specifies that we want diamond-shaped markers and a solid line connecting them. The set() function is used to set the x-axis scale to logarithmic using the gca() function to get the current axes handle. Note that the semilog plot is commonly used for data that spans several orders of magnitude to make it easier to visualize trends in the data.

know more about MATLAB,

https://brainly.com/question/30763780

#SPJ11

Answer:

industrial engineering

Explanation: