The statements describe a spring at its equilibrium position is the elastic potential energy is zero, the displacement of the spring is at a maximum and the net force acting on the spring is zero.
What is the equilibrium position?
A body is in equilibrium when the sum of all forces acting on it equals zero. According to Newton's First Law, when resulting from the laws that act on a body that remains in a state of restriction or in motion in its motion, it remains uniformly null.
In this case the only statements that match the definition of equilibrium position are:
The elastic potential energy is zero.The displacement of the spring is at a maximum.The net force acting on the spring is zero.See more about equilibrium position at brainly.com/question/10374921
#SPJ1
A gas occupies 4.31 liters at a pressure of 0.755 atm. Determine the Temperature
A gas that occupies 4.31 litres at a pressure of 0.755 atm will have a temperature of 39.58°C. Details about temperature can be found below.
How to calculate temperature?The temperature of a gas can be calculated using the following formula:
PV = nRT
Where;
P = pressureV = volumen = number of molesR = gas law constantT = temperature0.755 × 4.31 = 1 × 0.0821 × T
3.25 = 0.0821T
T = 3.25 ÷ 0.0821
T = 39.58°C
Therefore, a gas that occupies 4.31 litres at a pressure of 0.755 atm will have a temperature of 39.58°C.
Learn more about temperature at: https://brainly.com/question/11464844
#SPJ1
A certain gas has a molar mass of 28.0 g mol. Calculate the mass of this gas that would fit into a 3.00 litre container at 182 kPa and 47.2 °C?
Answer:
5.74 gm
Explanation:
First, use the ideal gas law PV = n RT
to find the number of moles, then multiply by 28 g/ mole
PV = n RT T must be in Kelvin R = 8.314463 L kPa/(K - Mol)
( make sure you use the R with the correct units!!)
182 kPa * 3 L = n (8.314463 ) ( 273.15+47.2)
solve for n = .205 moles
.205 mole * 28 g/mole = 5.74 gm
The mass of the gas can be calculated using ideal gas law. The mass of the gas is approximately 1.37 g.
What is ideal gas law ?According to ideal gas law, the pressure , volume temperature and number of a moles of a gas is related as :
PV = nRT
To calculate the mass of a gas that would fit into a container at a given temperature, pressure, and volume, we can use the ideal gas law equation:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature in Kelvin.
We can rearrange this equation to solve for the number of moles:
n = PV/RT
Once we know the number of moles, we can use the molar mass of the gas to calculate the mass of the gas:
mass = n x molar mass
where molar mass is given as 28.0 g/mol.
Substituting the given values, we get:
n = (182 kPa) x (3.00 L) / [(8.31 J/mol-K) x (47.2°C + 273.15)] = 0.0489 moles
mass = 0.0489 moles x 28.0 g/mol = 1.37 g
Therefore, the mass of the gas that would fit into a 3.00 L container at 182 kPa and 47.2°C is approximately 1.37 g.
Find more on ideal gas law:
https://brainly.com/question/28257995
#SPJ2
A 50.0 mL sample of gas at 20.0 atm of pressure is compressed to 40.0 atm of pressure at constant temperature. What is the new volume?
Answer:
20(50) = 40(V₂)
⇒1000 = 40V₂
⇒V₂ = 1000/40
⇒ V₂ = 25 mL
Explanation:
Answer:
25.0 mL
Explanation:
I took the test and got it right :)
What is the advantage of using the electromagnetic spectrum model?
It helps compare frequencies of light.
It helps change the wavelengths of light.
The color of light waves can be changed using the model.
The intensities of light waves can be changed using the model.
Answer:
It helps compare frequencies of light.
Explanation: Hope it helps you :)))))
Have a good day.
Answer: A: It helps compare frequencies of light.
Explanation:
What is the grams per liter concentration of a solution
composed of 8.210 g of potassium chloride, KCI,
dissolved in enough water to make 0.300 L of solution?
a. 0.0846 g/L
b. 16.4 g/L
c. 0.367 g/L
d. 27.4 g/L
Grams per liter in the solution give the density of the solution. The density of the solution is 27.4 g/L. Thus, option d is correct.
What is density?Density is the ratio of the mass in gms to the volume of the solution in liters.
Given,
Mass of potassium chloride = 8.210 gms
Volume of solution = 0.300 L
Density is calculated as:
ρ = mass ÷ volume
= 8.210 ÷ 0.300
= 27.36 g/L
Therefore, the density of the solution is 27.4 g/L.
Learn more about density here:
https://brainly.com/question/12959916
#SPJ1
does hot ice have to be cold or hot?
Answer:
hot
Explanation:
You'll need to boil the solution, though, to reduce the amount of water so that it is concentrated enough to form crystals. Cook your solution over low to medium heat for about an hour. You want to reduce it down to 1 cup or less.
The energy of a photon is 4.23 x 10-17 J. What is the wavelength of the radiation?
The wavelength of the radiation is 4.7 x 10⁻⁹ m
What is the Einstein's Formula for Energy?
The energy
E is given, from Einstein's formula, as:
E=h⋅ν
Where:
h=6.63×10⁻³⁴Js is Planck's constant;
ν is the frequency.
You can relate frequency and wavelength
λ through the speed of light c as:
c=λ⋅ν
So finally you get:
E=hc/λ
It is given in the question
The energy of a photon is 4.23 x 10⁻¹⁷ J.
Wavelength = ?
λ = hc/E
λ = 6.63×10⁻³⁴x 3 x 10⁸ / 4.23 x 10⁻¹⁷
λ = 4.7 x 10⁻⁹ m
Therefore the wavelength of the radiation is 4.7 x 10⁻⁹ m .
To know more about Einstein's Equation for Energy
https://brainly.com/question/3505748
#SPJ1
The first four electrons shells fill out in what electron configuration?
Apparently the answer is 2,8,8,2. Why?
Explanation:
2, 8, 8, 2 is the electron arrangement of Calcium.
The way that the "orbitals", the shells, fill up is given as
[tex]1s^{2} 2s^{2} 2p^{6} 3s^{2} 3p^{6} 4s^{2} 3d^{10}[/tex] . . . etc etc.
It is more stable for the fourth shell to start filling up with an electron pair, and then subsequent electrons filling up the third shell again.
So while potassium 19, is 2,8,8,1
And calcium 20, is 2,8,8,2
Scandium 21 will fill up as, 2,8,9,2
This will continue until we reach Zinc 30, which will fill up as 2,8,18,2. The third shell is now "full", and the fourth shell will now being to fill up.
The fourth orbital starts getting filled up again, Gallium 31, is 2,8,18,3
Why do Earth and the moon remain in orbit?
Answer:
because of gravitional force(gravity)........
What is the molality of this solution of table sugar in water?
The molality of the sugar solution is 0.034 mol/kg.
The molality and molarity of a chemical solution are equivalent for aqueous solutions of covalent molecules, such as sugar.
8. (02.04 MC)
The partial electron configuration of an atom with 14 electrons is shown.
1s²2s²2p63s²x
Which of the following does X represent? (3 points)
2d²
3s²
3p²
4s²
E
Answer:
3p^2
Explanation:
after filling 3s^2 only two electrons left out of 14 so the next sub shell is 3p therefore ,X represents 3p^2
PLEASE HELP!
The vapor pressure of benzene at 25 °C is 95.1 mm Hg and of toluene 28.4 mm Hg. The mass fractions of benzene and toluene in a solution are 0.5.
a) Calculate the partial pressure of benzene and toluene above the solution.
b) Calculate the total vapor pressure above the solution.
c) Calculate the vapor composition above the solution.
Benzene be B
Toluene be T
We have made then one lettered to make things easier
[tex]\sf P^0_B=95.1mmHg,P^0_T=28.4mmHg[/tex][tex]\sf x_B=x_T=0.5[/tex][tex]\\ \rm\Rrightarrow \dfrac{P^0_B-P_B}{P^0_B}=x_B[/tex]
[tex]\\ \rm\Rrightarrow 95.1-P_B=95.(0.5)[/tex]
[tex]\\ \rm\Rrightarrow 95.1-P_B=47.55[/tex]
[tex]\\ \rm\Rrightarrow P_B=47.55mmHg[/tex]
And
[tex]\\ \rm\Rrightarrow \dfrac{P^0_T-P_T}{P^0_T}=x_T[/tex]
[tex]\\ \rm\Rrightarrow 28.4-P_T=28.4(0.5)[/tex]
[tex]\\ \rm\Rrightarrow P_T=14.2mmHg[/tex]
Total vapour pressure
28.4+95.1123.6mmHg
3) A gas has a volume of 15.0 mL at a pressure of 1.05 atm. What is the volume of the gas at
a pressure of 0.450 atm?
Answer:
V⬇2=64.mL this is the answer and the 2 is supposed to be at the bottom which the arrow stands for so do not put the arrow with that
What is the molecularity of the elementary step X + X + Y → Z?
The molecularity of the elementary step X + X + Y → Z is 3.
What is Molecularity ?Molecularity in chemistry is defined as the total number of molecules that react in an elementary reaction .
In the given question the elementary reaction given is
X + X + Y → Z?
or 2X +Y --> Z
X molecule is 2 and Y molecule is 1 so the molecularity is 2+1 = 3
The molecularity of the elementary step X + X + Y → Z is 3.
To know more about Molecularity
https://brainly.com/question/14614762
#SPJ1
What is the mass of butane gas, C4H10, that can be held in a 3.00 L container at STP?
Answer:
3/22.4
Explanation:
How do I create an atom with a mass of 3 and a neutral charge?
Answer:
a lithium atom (Z=3, A=7 AMU) contains three protons (found from Z), three electrons (as the number of protons is equal to the number of electrons in an atom), and four neutrons (7 – 3 = 4).
Explanation:
A solution of the ionic salt
NaCI would have
pH.
an acidic
a basic
a neutral
Answer:
Neutral
Explanation:
NaCl aqueous solution is formed by NaOH and HCl.
NaOH is a base and HCl is an acid, so they go through neutralization process forming a neutral salt and water.
Which statement about entropy is correct? - Entropy is sometimes described as the degree of randomness in a system. - solids are the state of matter with the most entropy. - entropy is a force of nature like gravity. - warm molecules have less entropy then cold molecules.
Answer: Entropy is sometimes described as the degree of randomness in a system.
Which symbol represents a type of radiation that has the same mass as an
electron and a positive charge?
OA. e
OB. OY
O C. e
O D. He
Answer:
D.+1°e symbol represents a type of radiation that has the same mass as an electron and a positive charge.
What information does the potential energy diagram reveal about a reaction?
A. It shows what the enthalpy of formation is for each molecule.
B. It shows the changes in kinetic energy of the molecules.
C. It shows what phase changes occurred during the reaction.
D. It shows whether the reaction is exothermic or endothermic.
Answer: It shows whether the reaction is exothermic or endothermic.
Explanation:
If the potential energy of the products is greater than that of the reactants, then the reaction is exothermic.If the potential energy of the reactants is greater than that of the products, then the reaction is endothermic.For the reaction N2O4(g) 2 NO2(g), Kc = 0.21 at 100 C. At a point during the reaction, [N2O4]=0.12 M and [NO2]=0.55M. Is the reaction at equilibrium? If not, in which direction is it progressing?
The equilibrium constant shows the extent to which reactants are converted into products.
In this case, we must find the reaction quotient as follows;
Qc = [0.55]^2/[0.12] = 2.5
Since the Qc > Kc, it means that the reverse direction is favored in this reaction.
Learn more about Kc:https://brainly.com/question/15856317
#SPJ1
what is called a measurement and does involve a number and unit in chemistry?
Answer:
1.1: Taking Measurements. Chemists measure the properties of matter and express these measurements as quantities. A quantity is an amount of something and consists of a number and a unit. The number tells us how many (or how much), and the unit tells us what the scale of measurement is.
Edge Modeling Nuclear Changes
Summarize nuclear changes.
a) Use your completed table and models to write a summary that addresses the following questions:
1. How does energy change in these reactions? Is energy needed to start the reactions or is energy given off in the reactions? For each type of reaction, approximately how much energy is released?
2. How do these energy changes compare in scale to other types of reactions, such as chemical reactions?
Part 1
During nuclear reactions, energy is released.To calculate energy changes, use the attached process.Part 2
In nuclear reactions, much more energy is released than in other types of reactions, such as chemical reactions.SOUND ENERGY :SCIENCE:
If you have A B C and D 4cups and A has nothing A is control Because the pitch is high but why is it important to have control
Answer:
As the amplitude of the sound wave increases, the intensity of the sound increases. Sounds with higher intensities are perceived to be louder. Relative sound intensities are often given in units named decibels (dB).
Explanation:
Atoms are spherical in shape. Therefore, the Pt atoms in the cube cannot fill all the available space. If only 74.0 percent of the space inside the cube is taken up by Pt atoms, calculate the radius in picometers of a Pt atom. The mass of a single Pt atom is 3.240 × 10−22 g. [The volume of a sphere of radius r is (4/3) πr3. The volume of a cube is l3, where l is the length of a side. Avogadro's number is 6.022 × 1023.]
Answer:
Answer:
A)6.6×10^22atoms of Pt in the cube
B)1.4×10^-8m
Explanation:
(a) Calculate the number of Pt atoms in the cube.
an edge length of platinum (Pt) = 1.0 cm.
Then Volume= 1.0 cm×1.0 cm×1.0 cm=1cm^3
Then we have volume of the cube as 1cm^3
Given:
The density Pt = 21.45 g/cm3
the mass of a single Pt atom =3.240 x 10^-22 g
Then with 1atom of the platinum element, we can calculate the number of Pt atoms in the cube as
Density of pt/mass of a single Pt atom
=(21.45 /=3.240 x 10^-22)
=6.6×10^22atoms of Pt in the cube
B)Volume of cube V=4/3πr^3
V= 4/3 ×π×r^3
V= 4.19067r^3
r^3= V/4.19067
But volume is not total volume but just 74% of it, then With 74% of the space inside the cube is taken up by Pt atoms, then we need to find 74% of volume of the cube which is 1cm^3
74/100 ×1= 0.74cm^3
Then our new volume V is 0.74cm^3
r^3=0.74/4.19067×6.620 x 10^22
r^3=2.6674×10^-24
r= 3√2.6674×10^-24
r=1.4×10^-8m
What is the source of the forces that move the tectonic plates along this plate
boundary?
A. Differences in density between two different types of oceanic
crust
OB. Convection currents in the mantle
C. Convection cur nts in the ocean
D. Differences in density between oceanic crust and continental crust
The source of the forces that move the tectonic plates along this plate
boundary is the convection current in the mantle. Hence, the correct
option in option (B)
What are Tectonic plates ?Tectonic plates refers to the Spheres that are found in the uppermost Mantle of the Earth .
The Tectonic plates are also called the Litosphere .
The Motion of the Plates about the axis causes the Tectonic demarcations which are Know as the
Convergent
Divergent
Transform
Now these Plate are formed by the Convection of Currents in the Earths's Mantle
That is, the Dynamics of Current in and around the Earths Mantle brings about the tectonic plates
Hence the the correct option in option (B)
Learn more about tectonic plates Here ;
brainly.com/question/15476626
#SPJ1
Convection currents in the mantle is the source of the forces that move the tectonic plates along this plate boundary and is denoted as option B.
What is Convection?This is referred to the process of heat transfer in a fluid such as gases and liquids.
The convection currents in the mantle is responsible for the force present in the tectonic plates.
Read more about Convection here https://brainly.com/question/9382711
#SPJ1
& Sodium chloride, sugar, starch, and sand are added to water separately in different beakers and the mixtures are stirred well. A suspension will be formed in which case? Give any two reasons for your choice.
Answer:
sugar I like it I think iyrx
(b) Glycogen may be broken down to form glucose.
Fig.2.2 shows region X from the glycogen molecule in Fig. 2.1 in more detail.
Draw an annotated diagram in the space provided to explain how a glucose molecule is
formed from the free end of the glycogen molecule shown in Fig.2.2
Glycogen is formed by the loss of water molecules along the length of the polymer chain as the glucose molecules are joined together.
How is glycogen formed?Glycogen is formed by a process known as condensation polymerization. This involves the loss of -OH from one glucose molecule and the loss of H from another glucose molecule as the chain is formed.
Hence, glycogen is formed by the loss of water molecules along the length of the polymer chain as the glucose molecules are joined together.
Learn more about glycogen:https://brainly.com/question/14618322
#SPJ1
A certain atom has 22 protons and 19 electrons. This atom loses an electron. The net charge on the atom is now 4+. If this same atom with 22 protons and 19 electrons were to gain 3 electrons, the net charge on the atom would be
Answer: 0
Explanation:
If 3 electrons were to be gained, then the number of protons would equal the number of electrons.
A student didn't notice that her pipette tip was broken. She used the pipette properly but it consistently delivered 4.70 cm³ of vinegar instead of the desired 5.00 cm³. How would the percent by mass results obtained have been affected? Explain your answer.
The mass % will be affected by 0.25%.
What is mass percentage ?Mass Percentage is defined as the grams of solute per gram of solution , multiplied by 100%
It is given that
She used the pipette properly but it consistently delivered 4.70 cm³ of vinegar instead of the desired 5.00 cm³.
Mass Percentage affected = ?
Mass is directly proportional to the volume
For calculating ratios of the same compound the density can be neglected
the density of vinegar is 1.05 gm/cm³
mass for 5cm³= 5*1.05 = 5.25gm
mass for 4.75 cm³ = 4.9875 gm
for 100 gm solution
mass% expected = 5.25* 100/100 = 5.25%
mass % (actual) = 4.9875 / (100-0.2625) = 5%
Therefore the mass % will be affected by 0.25%.
To know more about Mass Percentage
https://brainly.com/question/16885872
#SPJ1