Ex-1: Using EFM to design the interior panel C of the flat plate floor shown in Figure
below. Assume fy = 414 MPa, fd = 25 MPa, LL =4.8 kN/m², DL = 1.0 kN/m² in
addition to self-weight of slab, floor height=3.66 m, C1 = C2 = 460mm, thickness of
the slab hf = 216 mm

A sophisticated tool for doing static analysis of trusses is called 2D Truss Analysis. It uses optimized finite elements (bar elements).

The 2D-Truss Analysis By using their two locations, identify the structure's node points.The two nodes (or mouse-dragging between two nodes) and material number of each truss element should be specified.the material information (cross-section and Young's modulus) Specify the loads.

If a truss can be completely estimated using only the equations of static equilibrium, it is said to be statically determinate. In order for a planar truss to be statically determinate, the sum of the members and support reactions cannot be greater than the number of joints divided by 2.It is a leader-product in truss analysis due to its adaptable interface and simple modification. attributes for analysis.

To learn more about 2D truss refer to :

https://brainly.com/question/13685762

#SPJ1

The two functions of nested list will be:

[[Int]]

sumNestedList :: [[Int]] -> Int

sumNestedList xs = sum (map sum xs)

sumNestedList2 :: [[Int]] -> Int

sumNestedList2 = foldr (\x acc -> sum x + acc) 0

What is nested list?

A nested list is a list of lists, or a list that contains other lists as elements. It is an effective way to organize and store data in a hierarchical structure. Nested lists are useful for organizing data into categories and subcategories, such as products and their sub-components or ingredients. A nested list is also a way to represent a tree data structure, which is a type of hierarchical data structure that consists of nodes connected by directed edges. Nested lists can also be used to represent graphs, networks, and other complex data structures.

To learn more about nested list

https://brainly.com/question/15048204

#SPJ4

The sentences that best describe ISO 9001:2015 are:

1) Quality management systems- requirements

2) ISO 9001 is certifiable by accredited certification bodies

3) "Combination of internal and external issues that can have an effect on an organization's approach to developing and achieving its objectives" is the definition of: Context of the organization

4) "Systematic, independent and documented process for obtaining objective evidence and evaluating it objectively to determine the extent to which the audit criteria are fulfilled" is the definition of: Audit

5) Mandatory documented information required by ISO 9001:2015 standard includes: Scope of the quality management system, Quality objectives, Design and development changes, and Maintenance of infrastructure

6) The clause of ISO 9001:2015 standard which is the requirement for conducting internal audit specified is Clause 9: Performance evaluation

7) Audit criteria include: ISO 9001:2015 standard, Customer contract requirements, Quality manual, and Operating procedures

8) Internal audit shall be performed at planned intervals by internal auditors of the organization implementing ISO 9001:2015 quality management system.

9) Purpose of conducting internal audits includes checking compliance of the quality management system against ISO 9001:2015 requirements, identifying improvement needs, and evaluating the effectiveness of the quality management system.

10) Extent and boundaries of an audit are defined as: Audit scope

11) The principles of auditing include: Ethical conduct, Evidence based approach, Due professional care

12) As long as a piece of critical monitoring equipment is periodically used by the operators who know how to use it skillfully, a formalized maintenance and calibration program is not necessary: False

ISO 9001:2015 determines requirements for a quality management system provided an organization needs to demonstrate its ability to consistently provide products and services that meet customer and applicable statutory and regulatory requirements and aims to enhance customer satisfaction through the effective application of the system

Therefore, the correct answer is as given above

learn more about ISO 9001:2015: https://brainly.com/question/28870416

#SPJ1

Deformed steering wheel Of The Following Would Most Likely Occur As The Direct Result Of The Second Collision. Air bubbles in the arterial blood vessels.

The second collision is the “human collision.” At the moment of impact, passengers in the car that are unrestrained are still travelling at the vehicle's original speed.

Stage 2: Human Collison During the second stage of “human collision,” all occupants in the vehicle will still be moving in the same direction and speed as they were before the collision happened. Inertia will keep the occupants moving toward the point of an impact unless a seatbelt or airbag stops them.

To know more about Second Collision visit :-

https://brainly.com/question/1871060

#SPJ4

Condition connected by OR will be true when either condition is true.

OR or in some programming language is symbolized as "||" is logical operator to give the result as true when at least one condition is true.

The opposite of OR is AND or can be symbolized as "&&" that required all of condition is true to give the result as true.

So, the first option is absolutely incorrect. The second and the fourth option is not quite right. Thus, the best option is the third option which is when either condition is true.

You question is incomplete, but most probably your full question was

(image attached)

Learn more about logical operator here:

brainly.com/question/15079913

#SPJ4

As a result, induced voltage will drop as the coil's turn count is reduced. This phenomena is explained by Faraday's Law.

According to Faraday's Law, if a conductor is a part of a closed circuit, an electric current will flow whether the conductor is passed through a magnetic field or the magnetic field is moved past the conductor.

We are aware that if a static conductor is placed within a fluctuating magnetic field or if a conductor moves within a static magnetic field, a voltage will be induced. This phenomena is explained by Faraday's Law.

Changes to the magnetic field's strength, the conductor's movement in and out of the field, the distance between a magnet and the conductor, or the size of a loop in the field can all result in this shift.

Know more about loop here:

https://brainly.com/question/14390367

#SPJ4

Design an amplitude modulator using a variable gain amplifier, such as the HMC694LPE. The baseband signal is given by x(t)=0.5cos(2πf0t)+0.5cos(4πf0t)V The carrier frequency is generated using a dielectric resonator oscillator with an output power of 15dBm at a frequency of 10GHz.

The method of amplitude modulation involves changing the amplitude of the wave signal before it is broadcast. It is frequently used to send information using a radio carrier wave and is known by the abbreviation AM. Electronic communication is where amplitude modulation is most commonly utilised. The modulator is a linear power amplifier that increases the low power level of the modulating signal. Through modulation transformer T1, the modulating output signal is linked to the class C amplifier.The modulating signal and carrier signal's relative amplitudes are Am and Ac. The frequencies of the modulating and carrier signals, respectively, are fm and fc.

To learn more about amplitude modulator click the link below:

brainly.com/question/13265507

#SPJ4

Code for calculating the median, geometric mean, arithmetic mean, adaptive local noise reduction, and adaptive median filters. Your software receives a 2d matrix as input:

// Median

function median(matrix) {

 // sort array

 const sorted = matrix.sort((a, b) => a - b);

 const mid = Math.floor(sorted.length / 2);

 const isEven = sorted.length % 2 === 0;

 if (isEven) {

   return (sorted[mid - 1] + sorted[mid]) / 2;

 }

 return sorted[mid];

}

// Arithmetic Mean

function arithmeticMean(matrix) {

 return matrix.reduce((a, b) => a + b, 0) / matrix.length;

}

// Geometric Mean

function geometricMean(matrix) {

 return Math.pow(

   matrix.reduce((a, b) => a * b, 1),

   1 / matrix.length

 );

}

// Adaptive Local Noise Reduction

function adaptiveLocalNoiseReduction(matrix) {

 const result = [];

 const windowSize = 3;

 for (let i = 0; i < matrix.length; i++) {

   for (let j = 0; j < matrix[i].length; j++) {

     const nums = [];

     for (let x = i - windowSize; x <= i + windowSize; x++) {

       for (let y = j - windowSize; y <= j + windowSize; y++) {

         const row = matrix[x] ? matrix[x][y] : 0;

         if (row) {

           nums.push(row);

         }

       }

     }

     result.push(median(nums));

   }

 }

 return result;

}

// Adaptive Median Filter

function adaptiveMedianFilter(matrix) {

 const result = [];

 const windowSize = 3;

 for (let i = 0; i < matrix.length; i++) {

   for (let j = 0; j < matrix[i].length; j++) {

     const nums = [];

     for (let x = i - windowSize; x <= i + windowSize; x++) {

       for (let y = j - windowSize; y <= j + windowSize; y++) {

         const row = matrix[x] ? matrix[x][y] : 0;

         if (row) {

           nums.push(row);

         }

       }

     }

     const medianValue = median(nums);

     const medianDiff = nums.map((x) => Math.abs(x - medianValue));

     const minDiff = Math.min(...medianDiff);

     const minIndex = medianDiff.indexOf(minDiff);

     result.push(nums[minIndex]);

   }

 }

 return result;

}

What is code?
Code is a set of instructions, written in a programming language, that tells a computer what to do. Code can be written to create software applications, websites, and mobile apps, among other things. Code is written using specific programming languages, such as C++, Java, Python, and HTML. Programmers use code to define how a program should work and to give the computer a set of instructions to execute. Code is the cornerstone of the digital world, and it is the basis for all computer-related tasks. Without code, computers would be unable to perform any task.

To learn more about code

https://brainly.com/question/23275071

#SPJ4

The Fourier transform of each signal :

The Fourier transform of a signal x[n] is given by X(ω) = ∑x[n]e^-jnω. In this case, the signal x[n] is a[n-2] - a[n-6], so we can rewrite this as x[n] = a[n]e^2ω - a[n]e^6ω. We can then use the Fourier transform formula to find the Fourier transform of the signal:

X(ω) = ∑(a[n]e^2ω - a[n]e^6ω) e^-jnω

= ∑a[n]e^2ωe^-jnω - ∑a[n]e^6ωe^-jnω

= A(ω)e^2ω - A(ω)e^6ω

Therefore, the Fourier transform of x[n] = a[n-2] - a[n-6] is X(ω) = A(ω)e^2ω - A(ω)e^6ω.

The Fourier transform of a signal x[n] is given by X(ω) = ∑x[n]e^-jnω. In this case, the signal x[n] is -u[-n-1], so we can rewrite this as x[n] = -u[n+1]e^-j(n+1)ω. We can then use the Fourier transform formula to find the Fourier transform of the signal:

X(ω) = ∑(-u[n+1]e^-j(n+1)ω) e^-jnω

= -∑u[n+1]e^-jω

= -A(ω)e^-jω

Therefore, the Fourier transform of x[n] = -u[-n-1] is X(ω) = -A(ω)e^-jω.

The Fourier transform of a signal x[n] is given by X(ω) = ∑x[n]e^-jnω. In this case, the signal x[n] is 2*sin(n)u[-n], so we can rewrite this as x[n] = 2*sin(n)e^-jnω. We can then use the Fourier transform formula to find the Fourier transform of the signal:

X(ω) = ∑(2*sin(n)e^-jnω) e^-jnω

= 2∑sin(n)e^-jnω

= 2A(ω)sin(ω)

Therefore, the Fourier transform of x[n] = 2*sin(n)u[-n] is X(ω) = 2A(ω)sin(ω).

The Fourier transform of a signal x[n] is given by X(ω) = ∑x[n]e^-jnω. In this case, the signal x[n] is (cos(n-1)), so we can rewrite this as x[n] = cos(n-1)e^-j(n-1)ω. We can then use the Fourier transform formula to find the Fourier transform of the signal:

X(ω) = ∑(cos(n-1)e^-j(n-1)ω) e^-jnω

= ∑cos(n-1)e^-jω

= A(ω)cos(ω-1)

Therefore, the Fourier transform of x[n] = (cos(n-1)) is X(ω) = A(ω)cos(ω-1).

The Fourier transform of a signal x[n] is given by X(ω) = ∑x[n]e^-jnω. In this case, the signal x[n] is sin(n) + cos(n), so we can rewrite this as x[n] = sin(n)e^-jnω + cos(n)e^-jnω. We can then use the Fourier transform formula to find the Fourier transform of the signal:

X(ω) = ∑(sin(n)e^-jnω + cos(n)e^-jnω) e^-jnω

= ∑sin(n)e^-jnω + ∑cos(n)e^-jnω

= A(ω) (sin(ω) + cos(ω))

Therefore, the Fourier transform of x[n] = sin(n) + cos(n) is X(ω) = A(ω) (sin(ω) + cos(ω)).

The Fourier transform of a signal x[n] is given by X(ω) = ∑x[n]e^-jnω. In this case, the signal x[n] is sin(n) + cos(n), so we can rewrite this as x[n] = sin(n)e^-jnω + cos(n)e^-jnω. We can then use the Fourier transform formula to find the Fourier transform of the signal:

X(ω) = ∑(sin(n)e^-jnω + cos(n)e^-jnω) e^-jnω

= ∑sin(n)e^-jnω + ∑cos(n)e^-jnω

= A(ω) (sin(ω) + cos(ω))

Therefore, the Fourier transform of x[n] = sin(n) + cos(n) is X(ω) = A(ω) (sin(ω) + cos(ω)).

The Fourier transform of a signal x[n] is given by X(ω) = ∑x[n]e^-jnω. In this case, the signal x[n] is x[n-6] + x[n+6], so we can rewrite this as x[n] = x[n]e^-6ω + x[n]e^6ω. We can then use the Fourier transform formula to find the Fourier transform of the signal:

X(ω) = ∑(x[n]e^-6ω + x[n]e^6ω) e^-jnω

= ∑x[n]e^-6ωe^-jnω + ∑x[n]e^6ωe^-jnω

= A(ω) (e^6ω + e^-6ω)

Therefore, the Fourier transform of x[n] = x[n-6] + x[n+6]

Learn more about Fourier transform:

https://brainly.com/question/28984681

#SPJ4

In order to determine the absolute maximum shear stress developed in a beam, you will need to know the following information:

The beam's cross-sectional area: The amount of material that can withstand shear forces will be determined by this.

The shear stress that a beam can withstand before failing will depend on its material qualities.

The beam is being sheared by this force: The amount of shear stress that develops in the beam will depend on this.

The length of the beam will affect how much it deforms when a shear force is applied.

Using this knowledge, you can apply the calculation below to determine the absolute maximum shear stress that has been created in the beam:

Shear force / cross-sectional area equals shear stress.

Remember that the shear force is assumed to be distributed equally over the cross-section of the beam in this formula. The shear stress distribution across the beam may require a more involved analysis if the shear force is not distributed uniformly.

To know more about Shear Stress kindly visit
https://brainly.com/question/12910262

#SPJ4

Structured Query Language (SQL), Query by Example (QBE) are tools used to run queries in an rdbms.

What is rdbms?
RDBMS (Relational Database Management System) is a type of database management system that stores data in tabular form, allowing for complex queries and records to be accessed quickly and easily. RDBMSs are used to store large amounts of data and can be used by a variety of different applications. RDBMS is based on the relational model, which uses a key-value pair structure to store data. This structure allows data to be related to each other, enabling the user to easily query and manipulate the data. RDBMSs also provide features like security, data integrity, scalability and performance. RDBMSs are widely used in applications like e-commerce, healthcare, banking and finance. They are also used in data warehouses, data marts and analytics applications.

To learn more about rdbms
https://brainly.com/question/24225134
#SPJ4

Complete Question:
a query is a request for information stored in a database. one of the benefits of using a database to store information is the ability to run a query. in relational database management systems (rdbms), there are a variety of query tools that are used to execute and run queries. which of the following are tools used to run queries in an rdbms?

A. Structured Query Language (SQL)

B. Database Query Language (DQL)

C. NoSQL

D. Query by Example (QBE)

Depending on whether Hi is greater than or equal to MD, the ALU either subtracts the MD register (the divisor) from its Hi input or allows the Hi input to pass through unaltered.

In conclusion, the division and multiplication operations used in this project are performed by the Arithmetic Logic Unit (ALU), which is an arithmetic and logical operation.

two binary values can be multiplied using this procedure. Take into account the fact that the ALU only offers the addition and shifting operations, not the multiplication operation. The microprogramming code can then be stored in memory and used to perform multiplication operations.

To know more about Arithmetic Logic Unit visit :-

https://brainly.com/question/28548014

#SPJ4

Since all processes have a finish value of true, the safe sequence is P2, P3, P1. Therefore, the correct answer is (B) P1, P2, P3.

To find the safe sequence using the Banker's algorithm, you need to perform the following steps:

Using these steps, we can find the safe sequence for the given scenario as follows:

Need matrix:

P1: 3-2=1, 3-3=0, 3-3=0

P2: 2-1=1, 1-1=0, 0-0=0

P3: 1-1=0, 1-1=0, 1-0=1

Work array: [2, 1, 1]

Finish array: [false, false, false]

Step 1: Process P2 has a need of [1, 0, 0] which is less than or equal to the work array, so it can be allocated resources. Update work array to [2-1=1, 1-0=1, 1-0=1] and set finish[P2]=true.

Work array: [1, 1, 1]

Finish array: [false, true, false]

Step 2: Process P3 has a need of [0, 0, 1] which is less than or equal to the work array, so it can be allocated resources. Update work array to [1-0=1, 1-0=1, 1-1=0] and set finish[P3]=true.

Work array: [1, 1, 0]

Finish array: [false, true, true]

Step 3: Process P1 has a need of [1, 0, 0] which is less than or equal to the work array, so it can be allocated resources. Update work array to [1-1=0, 1-0=1, 0-0=0] and set finish[P1]=true.

Work array: [0, 1, 0]

Finish array: [true, true, true]

Thus, the right answer is (B) P1, P2, P3.

Learn more about algorithm, here https://brainly.com/question/22984934

#SPJ4

Each oxygen atom has two bonding pairs and two lone pairs in the hydrogen peroxide (H2O2) molecule's Lewis structure.

To learn more about  lewis electron refer

https://brainly.com/question/20300458

#SPJ4

To replace the force system shown in Prob. 4-135 with a wrench, you will need to determine the magnitude and direction of the force and couple moment that the wrench should exert.

You can do this by taking the following actions:

Identify the net force influencing the system: You can accomplish this by adding up the various forces that are at work on the system. The net force in this situation is 200 + 400 = 600 N.

The system's net couple moment can be calculated by: This is accomplished by adding the two moments of the various forces at the wrench's x-z plane intersection. The net couple moment in this scenario is calculated as (0.5 m)(200 N) - (4 m)(200 N) - (3 m)(400 N) = -600 N*m.

Calculate the wrench's pair moment and force, taking into account their magnitude and direction: The equations for the force and couple moment of a wrench can be used for this.

To know more about Wrench kindly visit
https://brainly.com/question/10186385

#SPJ4

The most common architectural element shared between Greek and Etruscan architecture is the use of rounded arches.

Rounded arches were used in both Greek and Etruscan architecture to create a sense of grandeur and grandiosity, as well as to support the weight of the structure. In Greek architecture, the use of arches was often seen in temples, colonnades, and other monumental structures, while in Etruscan architecture, arches were often used in tombs and other funerary structures.

Additionally, arches allowed for a greater degree of structural stability, as they were able to distribute weight better than straight walls or pillars. Furthermore, the use of rounded arches in both Greek and Etruscan architecture provided a stylistic unity, as the two cultures had many similarities in terms of their architectural styles.

For more questions like Rounded arches click the link below:

https://brainly.com/question/2826840

#SPJ4

Choose any cell in the desired column. Click either A-Z to sort ascendingly or Z-A to sort descendingly in the Sort and Filter group on the Data tab.

Custom Sort can be found in the Sort & Filter group on the Data tab. Choose the column you want to sort in the Custom Sort dialog box's Columns section. Select Cell Color, Font Color, or Conditional Formatting Icon from the Sort On drop-down menu.

Therefore, Text should be sorted ascendingly. A list of names can be sorted alphabetically, product inventory levels can be listed from highest to lowest, or rows can be sorted by colors or icons.

Learn more about sorting function here:

https://brainly.com/question/29220823

#SPJ4

the donuts are chocolate and there are at least

(a) All the donuts are chocolate and there are at least 3, therefore, x³/1 − x.

A function from a set X to a set Y in mathematics assigns each element of X exactly one element of Y. The domain and codomain of the function are denoted by the sets X and Y, respectively. [Reference required]

The concept of function was first discussed by two Persian mathematicians named Al-Biruni and Sharaf al-Din al-Tusi. Functions were originally used to represent the idealised relationship between varying quantities and other variables. For example, time has an impact on a planet's position.

The concept was first developed at the end of the 17th century with the infinitesimal calculus, and up until the 19th century, the functions taken into account were differentiable.

Learn more about function

https://brainly.com/question/22340031

#SPJ4

Enthalpy Changes the overall energy change in the substance portrayed in the graph at  48°C.

Mass (m) = 0.3 Kg

Initial temperature (T1) = 20°C

Heat (Q) added = 35 KJ

Specific heat capacity (C) = 4.18 KJ/Kg°C

Final temperature (T2)

The final temperature of water can be obtained as follow:

Q = MC(T2 – T1)

35 = 0.3 x 4.18 (T2 – 20)

35 = 1.254 (T2 – 20)

Clear the bracket

35 = 1.254T2 – 25.08

Collect like terms

1254T2 = 35 + 25.08

1.254T2 = 60.08

Divide both side by the coefficient of T2 i.e 1.254

T2 = 60.08/1.254

T2 = 47.9 ≈ 48°C

Therefore, the final temperature of the water is 48°C.

Learn more about temperature on:

https://brainly.com/question/11464844

#SPJ1

The complete table for H₂O is shown below:

a) T (°C): 143.6, Phase description: Superheated water vapor

b) P, (Kpa): 2318 , u(kJ/Kg): 2602.4.    

c) u(kJ/Kg):805.53, Phase description: Compressed liquid water

d) T (°C): 466.73, Phase description: Superheated water vapor

Thermodynamics is the study of heat, work, and energy and how these quantities are related to each other. It aims to understand and predict the behavior of systems that exchange energy with their surroundings. The laws of thermodynamics provide a set of fundamental principles that can be used to analyze the behavior of systems and predict how they will behave under different conditions.

Here is the calculation for c and d:

c) Slope = (849.9 - 761.16) / (200 - 180) = 4.437

d) Intercept = 849.9 - 4.437 * 200 = 805.53 [kJ/kg]

Learn more about H₂O, here https://brainly.com/question/29711632

#SPJ4

To determine the expiration date of the last annual aircraft inspection, a person should refer to the aircraft maintenance records.

What are aircraft maintenance records?

Aircraft maintenance records include information about the work done to the aircraft, the date it was finished, the signature of the maintenance team, information about the FAA certificate, and the certificate number and signature of the person who put the aircraft back in service. The maintenance records mentioned in this rule can be simplified into two groups: permanent records and expiring records.

Permanent records are those maintenance logs that need to be retained and kept up-to-date for the aircraft forever. They act as a record of every maintenance action that has taken place during the lifecycle of the aircraft. It also functions as a tool for figuring out whether an aircraft has received all necessary maintenance and is in a state that allows for safe flight.

To learn more about aircraft maintenance records, use the link given
https://brainly.com/question/27961960
#SPJ4

When choosing circuit conductors, four aspects should be taken into account: current flow, voltage, voltage drop over distance, and heat resistance.

Three key criteria are used to determine the cable size: the carrying capacity right now. voltage control. Rating for short circuits. What elements determine the conduit and tubing sizes needed for an installation? Conductor count, cross-sectional area, and permitted raceway fill.

To avoid overheating and fire, the NEC specifies conductor minimum sizes. Three main variables affect how big a conductor needs to be to safely carry the current forced upon it: insulation type, ambient temperature, and conductor bundling.

Kelvin's law determines the appropriate size of the conductor for transmission lines (given by Lord Kelvin in 1881).

Know more about installation here:

https://brainly.com/question/13267432

#SPJ4

Answer:

Difficulty getting a loan or credit card.

An increase in debt.

Difficulty keeping assets.

A loss of money.

Explanation:

If a ball joint has a threaded plug, the plug can be removed and replaced with a Zerk fitting, allowing the ball joint to be greased on a regular basis.

What are Ball joints?

Ball joints are a component of a car's front suspension. The front suspension is a complex assembly of links, joints, bushings, and bearings that allow your front wheels to move independently up and down as well as turn left or right. Ball joints allow suspension movement, which increases tire contact with the road, resulting in better vehicle control and tire wear.

What are ball joints used for?

Ball joints are a critical component of the front suspension that connect and move various links. Ball joints, like the human hip joint, are made up of a ball and a socket. Your front suspension's ball joints pivot between the steering knuckles and control arms to provide a safe, smooth ride and precise control of your vehicle.

To know more about ball joint, visit: https://brainly.com/question/14318856

#SPJ4

To write an oz function which selects from a list of integers those which are positive. for example, if the input is [1 ~2 3 ~4], the output should be [1 3], checl the code given below.

In the Programming Systems Lab at the Université catholique de Louvain, a multiparadigm programming language called Oz was created for the purpose of teaching programming. The Concepts, Techniques, and Models of Computer Programming textbook is considered to be the bible of the subject.

Gert Smolka and his pupils created Oz for the first time in 1991. Together with Seif Haridi and Peter Van Roy's research team at the Swedish Institute of Computer Science, Oz's development was continued in 1996. The Mozart Consortium, a global organization that was founded in 1999 by Saarland University, the Swedish Institute of Computer Science, and Université catholique de Louvain, has been continuously working on Oz since that time.

//CODE//

fun {Map Xs}

        case Xs of nil then nil

            [] X|Xr then X|{Filter Xr fun {$ X} X>=0 end}

        end

     end

{System.show {Map [1 ~2 3 4]}}

Output will be [1 3 4]

Learn more about programming language

https://brainly.com/question/16936315

#SPJ4

To find the acceleration of point A, we can use Newton's second law of motion, which states that the force acting on an object is equal to the mass of the object times its acceleration.

The total force acting on the rod is the force P at point A and the weight of the rod at point B. The weight of the rod is equal to its mass times the acceleration due to gravity, so the total force is:

F_total = P + m_rod * g

Where m_rod is the mass of the rod and g is the acceleration due to gravity.

The acceleration of point A is then:

a = F_total / m_rod

To find the location of the point on the bar that has zero acceleration, we can use the concept of center of mass.

For a uniform rod, the center of mass is located at the midpoint of the rod.

The linear density of the rod is equal to its mass divided by its length, so the length of the rod is:

L = F_total / (m_rod / L)

Solving for L in terms of the given quantities, we find that the length of the rod is:

L = (P + m_rod * g) / (m_rod / L)

This equation can be rearranged and solved to find the value of L.

L^2 = (P + m_rod * g) / (m_rod / L)

L^3 = P + m_rod * g

L^3 - m_rod * g = P

L = (P / (m_rod * g))^(1/3)

Substituting in the given values, we find that:

L = ((0.25 lb) / (1.85 lb * 32.2 ft/s^2))^(1/3) = 0.45 ft

So the length of the rod is 0.45 ft and the location of point B is 0.45 ft from point A.

Here the calculation to find that the midpoint of the rod:

((0.25 lb) + (1.85 lb * 32.2 ft/s^2)) / (2 * (1.85 lb / L)) = 0.225 ft

So the point on the rod that has zero acceleration is located 0.225 ft from point A.

The missing part in the question is shown below.

A uniform slender rod AB rests on a frictionless horizontal surface, and a force P of magnitude 0.25 lb is applied at A in a direction perpendicular to the rod. Assume that the rod weighs 1.85 lb, dib, difermine  the acceleration of point  a) the acceleration of point A , (c) the location of the point B c) the location of the point on the bar that has zero acceleration.

Learn more about newton's law, here https://brainly.com/question/15280051

#SPJ4

Three D-type flip-flops are all that are needed to construct a divide-by-6 counter, also known as a modulo 6 (MOD-6) counter circuit. The counter is set up so that it counts from 0 to 5 and then automatically resets on the sixth count to start over.

It is unstable because we are using the sixth count itself to reset. Start with a MOD-B counter and look for the binary sequence 110, which is 6 in decimal, to get the trick. We look for the sequence of 1s and feed them into an AND gate because this binary sequence is unique. The RESET function on each of the three flip-flops is then controlled by the output of the AND gate. Keep in mind that the counter output is from left to right while binary is read from right to left (LSB to MSB). Here, students are likely to make mistakes and feed the AND gate with the wrong outputs.

One of the most important uses for shift registers is in Johnson counters. They are made by connecting the complement of the output of the last flip-flop to the input of the first flip-flop and connecting multiple flip-flops so that one flip-flop's output serves as the input for another.

A mod 6 Johnson counter requires three flip-flops. Keep in mind that a Johnson counter requires half as many flip-flops as it uses in states. Three flip flops will be needed because a mod 6 Johnson counter can count up to six states.

Because a Johnson counter is a synchronous counter like a ring counter, state transitions cannot occur unless the clock is in the "ON" state.

To know more about counter circuit visit

brainly.com/question/29375541

#SPJ4

Attach the modem and router. Hooking up and turning on devices in the right order is essential for setting up a network successfully. Start by connecting the modem to the wall using a coax wire (or a phone cable for DSL modems). Start the router first, then the modem. Cable from the wall to the modem must be connected.

To Learn more About modem and router refer To:

https://brainly.com/question/6358145

#SPJ1

The weight of the water displaced is calculated as the product of the ship's water displacement volume and water density. Displacement is therefore equal to ship weight.

Every floating object displaces its own weight in the liquid in which it is submerged according to the Archimedes principle. A vessel's weight must match the weight of the volume of water it removes in order for it to float freely in the water. The amount of water that a vessel displaces is known as displacement.

The buoyant force acting on the object will be equal to gravity if it displaces an amount of water equal to its own weight, at which point the object will float. However, if an object weighs more than the volume of water it moves, it will sink since the buoyant force will be greater than gravity.

Know more about force here:

https://brainly.com/question/9473432

#SPJ4