Explanation:
Morality is a set of values and habits that a society acquires over time and can be categorized as good and bad values, right and wrong, justice and crime. Ethics is defined as the study of morals, the practical application of moral behaviors defined by society.
Therefore, the concept of "murder" or "killing" is seen as an immoral act by the vast majority of society around the world, strengthened by the set of moral conduct common to all human beings, which are the Articles on the Universal Declaration of Human Rights. Human Rights, which is an official document of the UN, which contains several universair and analytical rules on the rights of every individual, such as the right to life, security, freedom, etc.
You have just installed a second monitor for a salesperson's workstation. The user wants to clone the display so that both monitors show the exact same image. This will allow them to see one of the displays while their customer sees the other across their desk. When you connect the second monitor and clone the display, the second monitor displays text twice as large as the other monitor. Which of the following settings should you configure?
Options are :
Refresh rate
Color depth
Extended mode
Resolution
The correct answer to the given question about setting configure is option d) Resolution
the group of settings that can be altered in hardware, software, or firmware that have an impact on how well an information system is protected or functions. The number of distinct pixels that can be shown on a digital television, computer monitor, or other display device depends on its display resolution or mode. It can be a confusing term, especially since projection displays that use fixed picture-element arrays, flat-panel displays, and cathode ray tube displays all use various mechanisms to regulate the shown resolution. Display resolution is a phrase used to describe the physical number of columns and rows of pixels that make up a fixed-pixel-array display, such as those used in plasma display panels, liquid crystal displays, DLP projectors, OLED displays, and related technologies.
To learn more about resolution click here
brainly.com/question/27964189
#SPJ4
Write a flowchart (or pseudocode) and C code for a program that does the following: Declares variables with float (real) data types. Assigns the tax rate
=.08
Asks the user to enter the sales amount Computes the sales tax by multiplying the sales by the tax rate Displays the sales tax with the appropriate message Create an assignment statement that computes the total sales, including the tax amount. Output a final message along with the total sales amount Be sure to add comments throughout your program describing what is happening
In order to write Pseudcode Alghorithm follow the given step or the chart in the answer.
Display " Enter the amount of the sale:" Read saleAmount. Display" Enter the sales tax rate:" Read taxRate. sales Tax saleAmount * taxRate. = saleTotal saleAmount + salesTax. Display" The sales tax is $" Display sales Tax. Display" The sale total is $" Display saleTotal.
The accuracy of complex software programs can be confirmed by implementing a thorough test plan that covers all potential outcomes that might occur when using the product. Test cases with boundary value cases for various software functions and procedures are one of the potential scenarios. Unit testing frameworks can be used to check the accuracy of various software program functionalities, and more test scenarios can be developed for thorough testing and verification. Additionally, several automation testing methods can be used to confirm the accuracy of the software program. By logging helpful data while the software is in use, further software behavior can be checked for accuracy.
To learn more about program click here
brainly.com/question/2553593
#SPJ4
is a technique which prioritizes meeting deadlines over delivering functionality. group of answer choices white box testing ad hoc scrum timeboxing
Timeboxing is a technique which prioritizes meeting deadlines over delivering functionality. The correct option is D.
What is Timeboxing?Timeboxing, which is a part of agile principles, assigns a defined and maximum amount of time to an activity, known as a timebox, within which scheduled activity takes happen.
It is employed by agile project management methodologies as well as for individual time management.
Timeboxing is a common method that establishes a predetermined deadline for a project and ensures that the system is delivered by that deadline regardless of what, even if functionality must be sacrificed.
Thus, the correct option is D.
For more details regarding Timeboxing, visit:
https://brainly.com/question/28392529
#SPJ4
connect the elm device to the tablet connect the elm device to the vehicle turn the vehicle ignition on, but don't start the engine; in other words turn the key to position ii.
To connect the ELM device to a tablet and a vehicle, you can use the following steps:
Connect the ELM device to the tablet: Depending on the model of ELM device and tablet you are using, there are several ways you can do this. Some options include:
Using a USB cable to connect the ELM device to the tablet
Using a Bluetooth connection to pair the ELM device and the tablet
Using a WiFi connection to connect the ELM device and the tablet
Connect the ELM device to the vehicle: There are several ways you can do this as well, depending on the vehicle and ELM device you are using. Some options include:
Using a diagnostic port on the vehicle: Many vehicles have a diagnostic port that you can use to connect the ELM device. This is usually located under the dashboard or in the engine compartment.
Using an OBD-II adapter: If your vehicle does not have a diagnostic port, you can use an OBD-II adapter to connect the ELM device. This adapter plugs into the OBD-II port, which is typically located under the dashboard on the driver's side.
Turn the vehicle ignition on: To do this, insert the key into the ignition and turn it to the "II" position. This will turn on the electrical systems of the vehicle, but will not start the engine.
To know more about ELM device kindly visit
https://brainly.com/question/28264380
#SPJ4
network equipment is usually not included as part of configuration management because there is little need to document network hardware.
Answer:
Network equipment, such as routers, switches, and hubs, is usually considered part of the infrastructure of a network and is typically included in configuration management. Configuration management refers to the process of tracking and controlling changes to the hardware, software, and documentation of a network.
Documenting network hardware is an important aspect of configuration management, as it helps to ensure that the network is configured correctly and is functioning as intended. Network equipment documentation may include details such as the make and model of the device, its serial number, its IP address, and its location within the network.
By documenting network hardware, organizations can more easily identify and resolve issues that may arise, track changes to the network, and maintain a consistent configuration across the entire network. It is therefore important to include network equipment as part of configuration management.
Jason is printing out a copy of Dion Training's new logo on his color laser printer. When the logo is printed, the blue color does not appear to be the same as the one on the screen. Jason believes the issue is an incorrect chroma display between the monitor and the printer. Which of the following solutions would best fix this issue?
O Replace the toner cartridge since the printout is faded
O Update the print drivers to ensure they are operating properly
O Set the color profile to a sepia tone to eliminate the issue
O Calibrate the monitor and printer to use the same color profile
Inaccurate chroma display happens when the monitor's and printer's color profiles are different. In order to fix this problem, it is essential to calibrate both the printer and the monitor to the same standard.
How does printing use chroma?Chroma, which is used to describe a color's purity, intensity, or saturation, is influenced by the individual and combined printed color densities, which were covered last week in Objective Ink Measures Optical Density.
What do a printer and a monitor have in common?A printer is a device that makes a tangible copy of electronic data from a computer. A monitor, commonly referred to as a visual display unit (VDU), is a gadget that displays information as text or images. A monitor is a dynamic, continuously updated picture display.
To know more about monitor visit:-
https://brainly.com/question/13369289
#SPJ4
Assume a computer has 32-bit integers. Show how the value 0x0001122 would be stored sequentially in memory, starting at address 0x000, on both a big endian machine and a little endian machine, assuming that each address holds one byte.
Address Big Endian Little Endian
0x000
0x001
0x002
0x003
The value 0x0001122 would be stored consecutively in memory on both a big endian machine and a little endian machine, starting at address 0x000.
What is the number of 32-bit integers?A nonnegative integer in the range [0 to 4294967295] is encoded using a 32-bit datum known as an unsigned integer. In twos complement notation, the signed integer is shown.
What does the computer term 32-bit mean?In computer systems, the term "32-bit" describes how many bits can be sent or processed simultaneously. In other words, a data element consists of 32 bits in total. When referring to a data bus, the term "32-bit" refers to the number of accessible paths, indicating that data can move over 32 of them simultaneously.
To know more about memory visit :-
https://brainly.com/question/28314437
#SPJ4
Your organization hosts an e-commerce website that has been receiving a significant increase in traffic. the cpu is handling the load, but the server is unable to process the bandwidth consistently. which of the following is the best choice to solve this problem?
The best choice to solve the server that unable to process the bandwidth consistently is NIC Teaming.
What is NIC Teaming?NIC Teaming or Network Interface Card teaming is the technique to combining multiple network card or physical network adapters together into a single or multi group, so it can make improvement for load balancing, performance, or redundancy reasons.
Since it grouping the network interface card, it can increase the availability of network bandwidth in a network path. So, it can make the bandwidth more consistent for server.
Thus, with the NIC Teaming we can make more consistent in bandwidth for server.
You question is incomplete, but this is a general answer about bandwidth, server, and NIC Teaming.
Learn more about NIC Teaming here:
brainly.com/question/24075846
#SPJ4
A router references its ____ to determine which of its interfaces is connected to the destination network.
a. ARP table
b. interface table
c. routing table
d. IP table
A router references its routing table to determine which of its interfaces is connected to the destination network.
About Routing TableRouting table is a table that contains information on the existence of a network, both a directly connected network and a network that is not directly connected (Remote Network). This table also contains information on how the router reaches a network. This routing table is very important because the router uses it as a guide for sending each data packet it receives. The information in the routing table is in the form of network address lines which are called Entry Routes.
In each entry route there is also information about which interface the router can use to send data packets. If the router receives a data packet, the router will check the destination IP address (Destination Address) of the packet, the router then matches it with the network address in each entry in the routing table, if there is a matching entry, the router will forward the packet to the interface on which it is connected. use to send the packet. The interface that is used to forward packets is called the Exit interface or outgoing interface, but if there is no entry that matches the router will discard the packet.
There are 4 Entry categories in the Routing table.
Directly Connected Network: This entry will appear when the router interface is activated and the IP address is configured, the Directly Connected Entry will have a C label. Static Routes: This entry is an entry that is filled in manually by the network administrator, so if there is a network change, this entry must also be changed manually as well, Static Route entries will have the label S. Dynamic Routes: This entry is an entry that will appear as a result of the exchange of routing information from several routers. Exchange of routing information will use the Routing Protocol. This entry is not filled in manually by the network administrator, the network administrator only needs to activate the routing protocol and network. right in Routing, this Dynamic Route Entry will Have label D 3. Default Routes: This entry is used to determine where a packet will be sent if the destination address of the packet is not listed in the Routing table. This entry default Routes can be configured manually (Static) or obtained from the exchange of information from the Routing Protocol (Dynamic).Learn more about routing table at https://brainly.com/question/29849373.
#SPJ4
your u.s.-based company has recently purchased an old office building where employees are being assigned to work. as you are setting up the employees' desktop computers, you come to one location where the nearest wall outlet has only two prongs. all of the metal-enclosed desktop computers have three-prong cords. which of the following is the best way to proceed with that particular desktop computer?
There is only one solution to this: use a two-prong extension cord and plug all of the metal-enclosed desktop computers with three-prong cords into it.
What function does the third prong in cords with three prongs serve?
A grounding wire can be connected from the electrical circuit to the appliance using the common 3-prong receptacle, which is why it is known as a grounding receptacle. A connection is made between the grounding wire and the plug's third prong.
Almost all electric board outlets in North-America have 2 vertical slots. The right slot is for the hot wire, and the left slot is for the neutral wire.
To power your device, electricity first passes through the hot wire. The neutral wire is then used to carry the current back to the outlet.
The circuit would be lacking without this loop. In other words, you just need two prongs for an outlet or device to work.
A ground prong, often known as a grounding wire, is the third, rounded prong on a plug. Electricity is constantly trying to find a way to the ground.
The ground wire serves as an escape route in the event of damage or a malfunction that changes the circuit and puts you and your equipment in danger of electric shock.
To know more about ground wire, visit: https://brainly.com/question/29689656
#SPJ4
Answer:
Find a different outlet that uses three prongs.
Explanation:
The third, or middle, prong of a computer plug is the grounding prong. In the event of a malfunction, the electricity flows through the grounding prong to the earth which, in turn, trips off the breaker, removing all electricity from that outlet. If the grounding prong is removed or bypassed and a malfunction occurs, the electricity will find the next shortest path to the earth, which may be a person who touches the computer. Having the electricity pass through a person could cause serious harm or even death.
You should never remove the third grounding prong or use an adapter to bypass the prong.
References
TestOut PC Pro 7.0 - 2.1 Protection and Safety
q_com_safm_equipment_grounding_pp7.question.fex
Question 9
Concerning IP address shortages, what is the most important difference between IPv4 and IPv6?
1 point
IPv6 addresses are simpler and therefore easier to remember than IPv4 addresses.
There are many, many more potential IPv6 addresses than IPv4 addresses.
IPv6 addresses are more secure.
It will be less expensive for a company to have multiple IPv6 addresses as compared to IPv4 addresses.
The most important difference between IPv4 and IPv6 is option b:there are many, many more potential IPv6 addresses than IPv4 addresses.
What is the IP address about?IPv4 uses 32-bit addresses and can support a maximum of approximately 4.3 billion unique addresses. In contrast, IPv6 uses 128-bit addresses and can support a virtually unlimited number of unique addresses.
Therefore, This is important because the rapid growth of the internet and the increasing number of devices that are connected to it have led to a shortage of available IPv4 addresses. As a result, IPv6 was developed to address this shortage and provide a much larger pool of available addresses.
Learn more about IP address from
https://brainly.com/question/30018838
#SPJ1
your system has a driver that is locked to manufacturer specifications. please try downloading the latest driver from the manufacturer's website to update. installer exit code: 1
Follow these instructions if you encounter an OEM error while installing graphics driver version 26.20.100.8141 or later:
Check to see if your system is equipped with a processor generation that is supported, such as an Intel 6th Generation Processor or higher. To affirm your processor age, perceive how to recognize your processor here.
Verify that the operating system (OS) on your system is compatible. Windows 10, 64-bit, version 1709 (also known as "Redstone 3") or later is supported by this driver. Learn how to identify your operating system here to confirm its version.
From the link provided below, select the appropriate driver for your system:
• Integrated graphics on Intel® Processors from the sixth generation to the tenth generation • Intel® ArcTM discrete graphics and/or integrated graphics on Intel® Processors from the eleventh generation or later • Intel® ArcTM Pro discrete graphics Disconnect from the internet so that Windows Update does not reinstall an earlier OEM driver.
Execute the exe file you downloaded.
When you reach the Install stage of the installation, click the Customize button. Make sure that the Execute a clean installation check box is not enabled.
Click the button labeled "Optional reboot" when the driver installation process is complete.
To access Update and Security, select the Windows Start icon and click the Settings Gear icon.
In the event that OEM customizations need to be reinstalled, select Windows Update and click Check for updates.
To know more about OEM visit
brainly.com/question/17422536
#SPJ4
a. in a simultaneous move game, microsoft will and you will . b. now suppose that microsoft selects a price first and then you decide whether you will enter the market. create a game tree for this sequential move game. this part is not graded, but you will need to make the game tree on your own to answer the following question. find the nash equilibrium if microsoft selects a price first. c. in this sequential move game, microsoft will and you will
In this sequential move game, Microsoft will select a price first and then you will decide whether you will enter the market.
What is market?
Market is a place where buyers and sellers interact and exchange goods and services at a price determined by the forces of demand and supply. It is a place for exchanging goods and services between the parties involved, typically buyers and sellers. Markets can be physical or virtual and can facilitate both the buying and selling of products or services. A market can be defined as a system where buyers and sellers interact and transact with one another by exchanging goods and services, as well as information regarding pricing, quality, and delivery. Marketplaces are an essential part of any economy, and they can be found in all types of businesses, from small-scale markets to large-scale ones such as stock markets.
The Nash equilibrium in this game is for Microsoft to select a price that is just high enough to deter you from entering the market, and for you to choose not to enter the market.
To learn more about market
https://brainly.com/question/21474169
#SPJ4
A computer's power supply converts mains AC to low-voltage regulated DC power for the internal components of a computer. You are building a new computer. You are deciding which type of power supply to install. Which of the following definitions BEST describes a valid type of power supply?
- A single-rail power supply provides one rail (PCB trace). This provides the best safety for the computer by providing a single point of shutdown in the event of a short circuit.
- A single-rail power supply provides one rail (PCB trace) used to always provide equal wattage to all devices attached to the power supply.
- A dual-rail power supply provides separate rails (PCB traces) used to balance the power load between multiple circuits, which prevents any one circuit from becoming overloaded.
- A dual-rail power supply provides separate rails (PCB traces) used to provide equal wattage to the devices attached to each rail.
The correct definition of a dual-rail power supply is: "A dual-rail power supply provides separate rails (PCB traces) used to balance the power load between multiple circuits, which prevents any one circuit from becoming overloaded."
In general, dual-rail power supplies are preferred for computers because they offer better power management and can help prevent short circuits or other issues that can damage the computer's components. However, single-rail power supplies can also be used in some cases, depending on the specific power requirements of the computer's components. A dual-rail power supply is a type of power supply that provides separate rails, or PCB traces, for distributing power to the components of a computer. These separate rails are used to balance the power load between multiple circuits, which can help prevent any one circuit from becoming overloaded.
Learn more about power supply, here https://brainly.com/question/28875612
#SPJ4
Help is greatly appreciated! I need a step but step explanation and a startup would be perfect.
The point we should pay attention to in this section is the following;
The type of the variable that we will store the temperature from the user must be a float. Because in the formula we will use, an integer is not generated for every integer we give.Below is the Python Code of this problem with comments added.
#Variables we need to store the data from user.
city = input("Enter the city name: ")
temperature_celcius = float(input("Enter the current temperature in Celcius: "))
#Calculation section by using the formula.
temperature_fahrenheit = (temperature_celcius * 9/5) + 32
#Inform the user.
print(f"The current temperature in {city} is {temperature_celcius}°C, which is {temperature_fahrenheit}°F.")
compose a single c programming statement thta calls the function passing teh value as an argument, and assigneing its return value to a correctly typed variable names solution
To compose a single c programming statement thta calls the function passing teh value as an argument, and assigneing its return value to a correctly typed variable names solution, check the code given below.
What is c programming?The programming language C is all-purpose for computers. Dennis Ritchie came up with it back in the '70s, and it's still heavily utilized and influential today. The features of C, by design, accurately reflect the capabilities of the CPUs it is intended to run on.
Though less frequently used for application software, it has long found a home in operating systems, device drivers, and protocol stacks. The largest supercomputers to the smallest microcontrollers and embedded systems all use the programming language C.
C was initially created by Ritchie at Bell Labs between 1972 and 1973 as a replacement for the programming language B to create utilities that ran on Unix. The kernel of the Unix operating system was re-implemented using it.
↓↓//CODE//↓↓
#include<iostream>
using namespace std;
double timesThree(double value)
{
return value*3;
}
int main()
{
cout<<timesThree(18.0);
}
Learn more about programming language C
https://brainly.com/question/26535599
#SPJ4
Consider the following method countNegatives, which searches an ArrayList of Integer objects and returns the number of elements in the list that are less than 0.public static int countNegatives(ArrayList arr){int count = 0;for (int j = 0; j < arr.size(); j++) // Line 4{if (arr.get(j) < 0)count++;}}return count;}Which of the following best explains the impact to the countNegatives method when, in line 4, j < arr.size() is replaced with j <= arr.size() - 1 ?
When in line 4, j < arr.size() is replaced with j <= arr.size() - 1, It has no impact on the behavior of the method.
What is a method?
A section of code known as a method only executes when it is called. Parameters are pieces of information you can pass into a method. In addition to being called functions, methods are utilized to carry out specific operations. A method on a class or interface offers details about and access to a specific method. The method that is being reflected may be a class method or an instance method (including an abstract method).
A method is a computer program that is defined as a class's procedure and is present in every object that belongs to that class in object-oriented programming. It is possible for a class to contain many methods.
To learn more about a method, use the link given
https://brainly.com/question/29376391
#SPJ4
Which of the following characteristics currently used today for authentication purposes is the LEAST unique?
A) Fingerprints
B) Iris
C) Retina
D) Face geometry
A characteristics currently used today for authentication purposes is the LEAST unique is Face geometry.
About face recognitionFace recognition is a biometric technique used to identify individuals from digital images or video recordings. This technology relies on computer algorithms to detect and identify a person's face. Computer algorithms can easily recognize an individual's face based on a number of unique features, such as the shape of the eyes, nose and lips.
Facial recognition technology has been used for a variety of purposes, from security to marketing applications. In the past, this technology was often seen as expensive and difficult for the general public to access. However, the technology has undergone significant development over the last few years and now it can be used as a payment method based on facial recognition.
Components of Performing Face RecognitionFace recognition is a type of identification system using the "biometric" method. In addition to facial recognition, biometrics are also used for fingerprint recognition, eye retina scanning, voice and signatures.
To perform face recognition requires several components, including:
Camera, to scan faces. Database, contains faceprint / face scan data. The algorithm, tasked with comparing the results of the facial prints made by the target with the face prints in the database.Learn more about facial recognition at https://brainly.com/question/14640106.
#SPJ4
Which security related phrase relates to the integrity of data?
Answer:
Explanation:
Data integrity.
Which of the following methods are static methods? The class in which the method is defined is given in parentheses following the method name.
a) sqrt (Math)
b) deposit (BankAccount)
c) equals (String)
d) play (Game from pig example in lecture)
e) a and c
The subsequent techniques are static methods as follows:
(A) sqrt (Math)
(B) deposit (BankAccount)
(C) equals (String)
(D) play (Game from pig example in lecture)
What are static methods?A static method (or static function) is a method that is defined as a member of an object but can only be accessed from the constructor of an API object, not from an instance of the object generated using the constructor.
Rather than being an instance of a class, a static method in Java is a method that is a part of the class itself.
The method is available to each instance of the class.
Without requiring the class's object, static methods have access to class variables (static variables) (instance).
A static method can only access static data.
Now, we know about static methods, then the following static methods from the given options are:
(A) sqrt (Math)
(B) deposit (BankAccount)
(C) equals (String)
(D) play (Game from pig example in lecture)
Therefore, the subsequent techniques are static methods as follows:
(A) sqrt (Math)
(B) deposit (BankAccount)
(C) equals (String)
(D) play (Game from pig example in lecture)
Know more about static methods here:
https://brainly.com/question/29607459
#SPJ4
A lesser known tool used widely by government agencies is ____, which retrieves data from smartphones, GPS devices, tablets, music players, and drones.
MOBILedit Forensic
Micro Systemation XRY
DataPilor
BitPim
The correct answer to the given fill in the blanks question about lesser known tool by government agencies is option b) Micro Systemation XRY
The Swedish business MSAB's XRY is a digital forensics and mobile device forensics product that is used to examine and recover data from mobile devices such mobile phones, smartphones, GPS navigation systems, and tablet computers. It comprises of a hardware component for connecting phones to a PC and software for data extraction. The goal of XRY is to forensically recover a device's contents such that the user may trust the information contained within. In civil and criminal investigations, intelligence gathering, data compliance, and electronic discovery situations, it is used. The program is accessible to military, law enforcement, and intelligence organizations. It has established itself as a well-known instrument in the field of digital forensics.
To learn more about forensics click here
brainly.com/question/14403044
#SPJ4
As an IT technician, you are often asked to work on laptop computers that included internal wireless network cards. Which of the following is the MOST commonly used type of card for these internal wireless adapters?
Answer:
The most commonly used type of card for internal wireless adapters in laptops is a Wi-Fi card, also known as a wireless network interface controller (WNIC). Wi-Fi is a wireless networking technology that uses radio waves to provide wireless high-speed Internet and network connections. Wi-Fi cards use the IEEE 802.11 standard to operate, and they are designed to work with a variety of devices, including laptops, smartphones, tablets, and other wireless-enabled devices. Some examples of Wi-Fi cards that are commonly used in laptops include the Intel Wireless-AC series, the Qualcomm Atheros AR9485, and the Realtek 8821AE.
Explanation:
question 2 understanding context is an analytical skill best described by which of the following? select all that apply.
It is crucial to note that understanding context is an analytical skill best described by:
"Gathering additional information about data to understand the broader picture" (Option C)"Identifying the motivation behind the collection of a dataset" (Option D)What is analytical skill?The capacity to dissect information into smaller categories in order to derive conclusions is referred to as analytical capability. Analytical ability is divided into aspects such as logical reasoning, critical thinking, communication, research, data analysis, and creativity.
Context analysis is a technique for examining the environment in which a company works. Environmental scanning mostly focuses on a company's macroenvironment. However, context analysis takes into account a company's complete environment, both internal and external.
It is important to note that understanding context is thinking about the larger context in which a dataset or piece of information resides and acquiring extra knowledge as needed to make sense of it. It also entails analyzing the reason for data gathering and how it may have impacted how the data was obtained or presented.
Learn more about analytical skills:
https://brainly.com/question/1086200
#SPJ1
Full Question:
Understanding context is an analytical skill best described by which of the following? Select all that apply.
A. Working with facts in an orderly manner
B. Adding descriptive headers to columns of data in a spreadsheet
C. Gathering additional information about data to understand the broader picture
D. Identifying the motivation behind the collection of a dataset
What is at least one of the command switches for the above command that is the same between Windows and Linux and what function does it perform?
In Linux or UNIX systems, the current username can be seen by using the whoami command.
What command is used in both Windows and Linux to search for DNS information?For DNS-related tasks like server testing or problem-solving, the nslookup tool is helpful. In a command-line interface (CLI), such as the Command Prompt on Windows or Terminal on Linux and macOS, use "nslookup" to access this utility.
Which network tool is utilised by Linux and Windows?Surprisingly, one of the essential utilities is shared by Linux and Windows systems: nslookup. Nslookup, a programme that was first created for Linux, comes with Windows. As part of troubleshooting, it enables administrators to create manual DNS queries. To debug DNS, Linux additionally uses the tools dig and host.
To know more about Linux visit:-
https://brainly.com/question/15122141
#SPJ4
Some computer experts have spoken out against the conversion to touch-screen voting machines because
A) a power failure could make it impossible for people to vote.
B) they do not have a paper audit trail.
C) there is no evidence that there have been any problems with punched card systems.
D) they are made in China, which does not even hold elections.
E) All of these
Due to the lack of a paper audit trail, several computer specialists have opposed the switch to touch-screen voting machine.
How do digital voting machines function?A direct-recording electronic (DRE) voting machine processes data using computer software and records votes using a ballot display with mechanical or electro-optical components that can be actuated by the voter (usually buttons or a touchscreen).
An ExpressVote device is what?All voters can use the ExpressVote, a universal voting mechanism. The touchscreen allows voters to select their options on the ballot. Voters who need an audio ballot have access to headphones and a tactile keypad.
To know more about computer software visit:-
https://brainly.com/question/29946531
#SPJ4
Assume you have a 32-light bulb string and ONE bulb is burned out. Using the half-splitting method and starting from the left half of the circuit, how many resistance measurements will it take to find the faulty bulb if it is number seventeenth from the left?
Answer: Finding a defective bulb among a specified sequence of bulbs is the task. A broken bulb exhibits inadequate resistance.
Explanation: I took the assignment
The number of resistance measurements that will it take to find the faulty bulb if it is number seventeenth from the left is 15.
What is Resistance measurement?Resistance measurement may be defined as a type of measure of the opposition to current flow in an electrical circuit. It is measured in ohms, symbolized by the Greek letter omega (Ω). It is the opposition that a substance offers to the flow of electric current.
According to the context of this question, if there is a 32-light bulb string and one bulb is burned out. Through the utilization of the half-splitting method starting from the left half of the circuit, there are 15 resistance measurements that will it take to find the faulty bulb if it is number seventeenth from the left.
To learn more about Resistance, refer to the link:
https://brainly.com/question/25997303
#SPJ2
can classify linear and nonlinear data by transforming the original data into a higher dimension from where it can find a hyperplane for data separation using essential training tuples.
Support Vector Machines can classify linear and nonlinear data by transforming the original data into a higher dimension from where it can find a hyperplane for data separation using essential training tuples.
Define Support Vector Machines.
Support vector machines are supervised learning models with related learning algorithms that examine data for regression and classification in machine learning. A deep learning technique known as a support vector machine (SVM) carries out supervised learning for the classification or regression of data sets. In the fields of artificial intelligence and machine learning, supervised learning systems offer input and intended output data that are labeled for classification.
Support Vector Machine (SVM) models are a strong tool for identifying predictive models or classifiers because they can categorize groups or generate predictive rules for data that cannot be classed by linear decision functions and because they handle sparse data effectively.
To learn more about support vector machine, use the link given
https://brainly.com/question/17490061
#SPJ4
Protecting information and information systems from unauthorized access, use, disclosure, disruption, modification, perusal, inspection, recording, or destruction best defines
A) information security.
B) security audit.
C) anti-virus protection.
D) incident management
In order to maintain integrity, confidentiality, and availability, information and information systems must be protected from unauthorized access, use, disclosure, interruption, alteration, and destruction.
Which three methods of information protection are there?The CIA trinity must be taken into account when talking about data and information. The three fundamental components of an information security concept known as the CIA triad are confidentiality, integrity, and availability.
Which response most accurately sums up the authorization part of access control?The process of deciding who is granted access and what resources they are granted for is known as authorization.
To know more about information systems visit :-
https://brainly.com/question/14688347
#SPJ4
TCP/IP:
a. is the least commonly used network protocol for LANs because it cannot be combined with Ethernet
b. performs packetizing, as well as routing and addressing functions
c. is not very efficient and is prone to errors
d. is compatible with only one type of data link protocol, SDLC
e. refers to Telephone Control Procedures/Inter-exchange Procedures
TCP/IP is the least commonly used network protocol for LANs because it cannot be combined with Ethernet. The correct option is a.
What is TCP?The usage of TCP allows for the secure exchange of data between the server and the client. No matter how much data is transferred across the network, it ensures its integrity. It is therefore used to transfer data from higher-level protocols that demand the arrival of all transmitted data.
When it came to protocols that could be used to offer network-layer and transport-layer functionality, TCP/IP was formerly only "one of many" alternative sets of protocols. TCP/IP is the globally accepted standard for internetworking protocol suites even if there are still other solutions available today.
Therefore, the correct option is a, is the least commonly used network protocol for LANs because it cannot be combined with Ethernet.
To learn more about TCP, refer to the link:
https://brainly.com/question/28119964
#SPJ4
in the following complete directed graph, how many paths are there from a to d? note: you may not backtrack or retrace any portion of any route.
The number of k-length pathways connecting node A to node B in a full graph of N nodes is (N-2)*(N-3) (k-2) Nodes A and B can only be seen as the ends of the path, there are no self-edges, and k > 1.
How can one locate every path in a directed graph?Using exponential, finding every potential path through any graph. The issue can be resolved by going back. For DAGs, we can employ Depth First Search (DFS). Use an array or list to keep track of all the nodes you passed when traveling from any node in the DFS code to the farthest dead end.
How many four-paths-long connections exist between A and D in the graph G?The G (ordering) adjacency matrix is provided in A. Thus, the (1, 4)th item of A4 is the number of four-paths from a to d. Since there are exactly eight pathways from a to d, each of length four.
To know more about directed graph visit:-
https://brainly.com/question/13148971
#SPJ4