We cannot construct a square that equals the sum of the areas of two given squares. This statement contradicts the mathematical principles and properties of squares and the Pythagorean theorem.
The statement that given any two squares, we can construct a square that equals the sum of the two given squares is actually false. This statement goes against the well-known mathematical concept known as the Pythagorean theorem.
The Pythagorean theorem states that in a right-angled triangle, the square of the hypotenuse (the side opposite the right angle) is equal to the sum of the squares of the other two sides. This theorem holds true for right-angled triangles, but it does not hold true for squares.
In fact, if we take two squares and try to add their areas together, the result will not be a square with an area equal to the sum of the two given squares. The resulting shape will be a non-square rectangle or some other irregular shape.
Therefore, we cannot construct a square that equals the sum of the areas of two given squares. This statement contradicts the mathematical principles and properties of squares and the Pythagorean theorem.
to learn more about Pythagorean theorem click here:
brainly.com/question/15624595
#SPJ11
For a confidence level of 90% with a sample size of 19, find the critical t value. Check Answer
The critical t-value for a 90% confidence level with a sample size of 19 and 18 degrees of freedom is approximately 1.734. This value is obtained from a t-table or statistical software and is used in hypothesis testing or constructing confidence intervals.
To determine the critical t-value for a 90% confidence level with a sample size of 19, we need to determine the degrees of freedom, which is equal to the sample size minus 1 (n - 1).
Degrees of Freedom (df) = 19 - 1 = 18
Next, we can use a t-table or a statistical software to find the critical t-value for a 90% confidence level with 18 degrees of freedom.
Checking the t-table, the critical t-value for a 90% confidence level with 18 degrees of freedom is approximately 1.734.
Therefore, the critical t-value for a 90% confidence level with a sample size of 19 and 18 degrees of freedom is approximately 1.734.
To know more about critical t-value refer here:
https://brainly.com/question/32389590#
#SPJ11
The solution to 12x = 36 is x = . (Only input whole number) (5 points) Blank 1:
Answer:
x = 3
Step-by-step explanation:
12x = 36
x = 36/12
x = 3
Hello !
Answer:
[tex]\large \boxed{\sf x=3}[/tex]
Step-by-step explanation:
We want to find the value of x that verifies the following equation :
[tex]\sf 12x=36[/tex]
Let's isolate x.
Divide both sides by 12 :
[tex]\sf \dfrac{12x}{12} =\dfrac{36}{12} \\\\\boxed{\sf x=3}[/tex]
Have a nice day ;)
Random samples of size n = 250 are taken from a population with p = 0.04.
a. Calculate the centerline, the upper control limit (UCL), and the lower control limit (LCL) for the p¯p¯ chart. (Round the value for the centerline to 2 decimal places and the values for the UCL and LCL to 3 decimal places.)
b. Calculate the centerline, the upper control limit (UCL), and the lower control limit (LCL) for the p¯p¯ chart if samples of 150 are used. (Round the value for the centerline to 2 decimal places and the values for the UCL and LCL to 3 decimal places.)
For a p-chart with sample size 150, the centerline (CL) remains 0.04, the upper control limit (UCL) is approximately 0.070, and the lower control limit (LCL) is approximately 0.010.
a. For a p-chart with sample size n = 250 and population proportion p = 0.04, the centerline (CL) is simply the average of the sample proportions, which is equal to the population proportion:
CL = p = 0.04
To calculate the control limits, we need to consider the standard deviation of the sample proportion (σp) and the desired control limits multiplier (z).
The standard deviation of the sample proportion can be calculated using the formula:
σp = sqrt(p(1-p)/n) = sqrt(0.04 * (1-0.04)/250) ≈ 0.008
For a p-chart, the control limits are typically set at three standard deviations away from the centerline. Using the control limits multiplier z = 3, we can calculate the upper control limit (UCL) and lower control limit (LCL) as follows:
UCL = CL + 3σp = 0.04 + 3 * 0.008 ≈ 0.064
LCL = CL - 3σp = 0.04 - 3 * 0.008 ≈ 0.016
Therefore, the centerline (CL) is 0.04, the upper control limit (UCL) is approximately 0.064, and the lower control limit (LCL) is approximately 0.016 for the p-chart with sample size 250.
b. If samples of size n = 150 are used, the centerline (CL) remains the same, as it is still equal to the population proportion p = 0.04:
CL = p = 0.04
However, the standard deviation of the sample proportion (σp) changes since the sample size is different. Using the formula for σp:
σp = sqrt(p(1-p)/n) = sqrt(0.04 * (1-0.04)/150) ≈ 0.01033
Again, the control limits can be calculated by multiplying the standard deviation by the control limits multiplier z = 3:
UCL = CL + 3σp = 0.04 + 3 * 0.01033 ≈ 0.070
LCL = CL - 3σp = 0.04 - 3 * 0.01033 ≈ 0.010
to learn more about standard deviation click here:
brainly.com/question/31946791
#SPJ11
Your mission is to track incoming meteors to predict whether or not they will strike Earth. Since Earth has a circular cross section, you decide to set up a coordinate system with its origin at Earth's center. The equation of Earth's surface is x² + y² = 40.68, where x and y are distances in thousands of kilometers. You observe a meteor moving along a path from left to right whose equation is 240/121 (y - 11)² - x² = 60 , where y ≤ 5.5. What conic section does the path of the meteor travel?
The equation of the meteor's path, 240/121 (y - 11)² - x² = 60, represents a hyperbola , The path of the meteor is a hyperbola.
The equation of the meteor's path, 240/121 (y - 11)² - x² = 60, represents a hyperbola. The standard form equation for a hyperbola is (y - k)²/a² - (x - h)²/b² = 1, where (h, k) represents the center of the hyperbola and a and b are the distances from the center to the vertices along the transverse and conjugate axes, respectively.
Comparing the given equation to the standard form, we can see that the center of the hyperbola is at (0, 11), and the distances a and b can be determined by comparing the coefficients.
The equation of Earth's surface, x² + y² = 40.68, represents a circle centered at (0, 0) with a radius of approximately 6.38 (square root of 40.68). Since the meteor's path is outside the circle, it intersects with the circular cross section of Earth, indicating a hyperbola.
Therefore, the path of the meteor travels along a hyperbola.
Learn ore about hyperbola here:
https://brainly.com/question/19989302
#SPJ11
A cannon shell follows a parabolic path. It reaches a maximum height of 40ft and land at a distance of 20 ft from the cannon. A. Write the equation of the parabolic path the shell follows. (Note: your answer will depend on where you locate your coordinate axes. B. Find the height of the shell when it's horizontal distance from the cannon is 10 ft.
The ball's height at a horizontal distance of 10 feet from the cannon is H = 56 - 16 = 40 feet.
A cannonball goes in an illustrative way when terminated from a cannon. The level of the ball at some irregular point can be resolved using the going with condition: The equation for H is -16t2 + Vt + H0, where H stands for height, t for time, V for initial velocity, and H0 for initial height. A. Before we can determine the condition of the cannonball's illustration, we must first determine the directions of the highest point it reaches.
Our coordinate axis' starting point will be (0, 0). Since the ball can reach a height of 40 feet, its vertex is at (10,40). The equation can be obtained by replacing these values with those of a parabola: y = a(x - h)2 + k. y = - 16x2 + 800x - 800.B. We want to find the level of the shell when its even partition from the gun is 10 ft. At this point, the height will be determined using the same equation: H = -16t2 + Vt + H0. Because the ball traveled 20 feet horizontally, we know that it took one second for it to land.
Consequently, we can substitute t = 1 and H0 = 0 into the circumstance: H = -16(1)2 + V(1) + 0. The way that the ball voyaged 40 feet in an upward direction in the principal second of its flight (when it was going up) and 20 feet in an upward direction as of now of its flight (when it was descending) can be utilized to compute its speed. H = V - 16. We can substitute t = 1 and H = 40 using the same condition to see as V: 40 = -16(1)2 + V(1) + 0. V = 56. H = 56 - 16 = 40 feet is the ball's height at a horizontal distance of 10 feet from the cannon.
To know more about equation refer to
https://brainly.com/question/29657983
#SPJ11
Listed below are speeds (min) measured from traffic on a busy highway. This simple random sample was obtained at 3:30 PM on a weekday. Use the sample data to construct an 80% confidence interval estimate of the population standard deviation 65 63 63 57 63 55 60 59 60 69 62 66 Click the icon to view the table of Chi-Square critical values The confidence interval estimate is milh
The confidence interval estimate of the population standard deviation is (8.34, 4.49).
The speeds measured from traffic on a busy highway, the sample data is:65, 63, 63, 57, 63, 55, 60, 59, 60, 69, 62, 66. We want to construct an 80% confidence interval estimate of the population standard deviation. The formula to compute the confidence interval is as follows:\[\text{Confidence Interval}=\left( \sqrt{\frac{(n-1)s^2}{\chi_{\frac{\alpha}{2},n-1}^2}}, \sqrt{\frac{(n-1)s^2}{\chi_{1-\frac{\alpha}{2},n-1}^2}}\right)\]Where,\[\text{s}= \text{sample standard deviation}\]n = sample size.\[\alpha= 1 - \text{confidence level}\]\[\chi^2= \text{critical value}\]From the given data, sample standard deviation can be computed as follows:$\text{sample standard deviation, s}= 4.60$.To find the critical values of Chi-Square distribution, $\alpha = 1-0.8 = 0.2$ and \[n-1 = 11\]Therefore, from the table of Chi-Square critical values, $\chi_{\frac{\alpha}{2},n-1}^2$ and $\chi_{1-\frac{\alpha}{2},n-1}^2$ can be computed as follows:$\chi_{\frac{\alpha}{2},n-1}^2=7.015$and $\chi_{1-\frac{\alpha}{2},n-1}^2=19.68$Putting all the computed values in the formula of the confidence interval, we have:Confidence Interval = $\left( \sqrt{\frac{(12-1)4.60^2}{7.015}}, \sqrt{\frac{(12-1)4.60^2}{19.68}}\right)$= (8.34, 4.49)Hence, the confidence interval estimate of the population standard deviation is (8.34, 4.49).
Learn more about standard deviation here:
https://brainly.com/question/29115611
#SPJ11
Calculate the iterated integral. 4 −4 /2 (y + y2 cos(x)) dx dy 0
The iterated integral is equal to −4y−4y³/3sin(4)+4y+4y³/3sin(−4) when the limits of integration are x from −4 to 4 and y from 0 to 2.
To calculate the iterated integral, we need to integrate with respect to x first and then with respect to y.
Thus, we have, 4−4/2(y+y²cos(x))dxdy
Integrating with respect to x, we get: ∫4−4/2(y+y²cos(x))dx= [4x-(y+y²sin(x))] from x = −4 to x = 4So, now our integral becomes: ∫−4⁴ [4x−(y+y²sin(x))]dy= (4x²/2−yx−y³/3sin(x)) from x = −4 to x = 4
Plugging in the values, we get:(16−4y−4y³/3sin(4))−(16+4y+4y³/3sin(−4))=−8y−4y³/3sin(4)+4y+4y³/3sin(−4)
Therefore, the iterated integral is equal to −4y−4y³/3sin(4)+4y+4y³/3sin(−4) when the limits of integration are x from −4 to 4 and y from 0 to 2. This is the final answer that is obtained after doing all the calculations.
Know more about integration here,
https://brainly.com/question/31744185
#SPJ11
Conference organizers wondered whether posting a sign that says "Please take only one cookie" would reduce the proportion of conference attendees who take multiple cookies from the snack table during a break. To find out, the organizers randomly assigned 212 attendees to take their break in a room where the snack table had the sign posted, and 189 attendees to take their break in a room where the snack table did not have a sign posted. In the room without the sign posted, 24.3% of attendees took multiple cookies. In the room with the sign posted, 17.0\% of attendees took multiple cookies. Is this decrease in proportions statistically significant at the α=0.05 level?
Yes, the decrease in proportions is statistically significant at the α=0.05 level. The p-value is 0.007, which is less than the significance level of 0.05. This means that there is less than a 5% chance that the observed decrease in proportions could have occurred by chance alone.
Therefore, we can conclude that the sign posting was effective in reducing the proportion of conference attendees who took multiple cookies.
The p-value is calculated by comparing the observed difference in proportions to the distribution of possible differences in proportions that could have occurred by chance alone.
The significance level is the probability of rejecting the null hypothesis when it is true. In this case, the null hypothesis is that the sign posting has no effect on the proportion of conference attendees who take multiple cookies.
The p-value of 0.007 is less than the significance level of 0.05, so we can reject the null hypothesis. This means that we can conclude that the sign posting was effective in reducing the proportion of conference attendees who took multiple cookies.
Learn more about null hypothesis here
brainly.com/question/30821298
#SPJ11
a. Convert 250° from degrees to radians.
b. Convert 3π/5 from radians to degrees.
a) 250° is equivalent to 5π/6 radians. b) 3π/5 radians is equivalent to 108°.
a) To convert 250° to radians, we use the conversion factor π radians = 180°. Therefore, 250° can be converted as follows: 250° * (π radians / 180°) = (5π/6) radians. Thus, 250° is equivalent to 5π/6 radians.
b) To convert 3π/5 radians to degrees, we use the conversion factor 180° = π radians. Therefore, 3π/5 radians can be converted as follows: (3π/5 radians) * (180° / π radians) = 108°. Thus, 3π/5 radians is equivalent to 108°.
Learn more about radians here:
https://brainly.com/question/28990400
#SPJ11
FILL IN THE BLANK use the data in the table to complete the sentence. x y –2 7 –1 6 0 5 1 4 the function has an average rate of change of __________.
The function has an average rate of change of -1.
To find the average rate of change of a function, we can use the formula:
Average Rate of Change = (Change in y) / (Change in x)
Using the data provided in the table, we can calculate the average rate of change between each pair of consecutive points. Let's calculate it for each pair:
Between (-2, 7) and (-1, 6):
Change in y = 6 - 7 = -1
Change in x = -1 - (-2) = 1
Average Rate of Change = (-1) / (1) = -1
Between (-1, 6) and (0, 5):
Change in y = 5 - 6 = -1
Change in x = 0 - (-1) = 1
Average Rate of Change = (-1) / (1) = -1
Between (0, 5) and (1, 4):
Change in y = 4 - 5 = -1
Change in x = 1 - 0 = 1
Average Rate of Change = (-1) / (1) = -1
From the calculations, we can see that the function has a constant average rate of change of -1 between any two consecutive points in the table.
Learn more about average rate here:
https://brainly.com/question/28739131
#SPJ11
A small block with a mass of 0.0400 kg is moving in the xy-plane. The net force on the block is described by the potential energy function (x) = (5.80 m2 ⁄ )x 2 − (3.60 m3 ⁄ )y 3 . What are the magnitude and direction of the acceleration of the block when it is at the point (x = 0.300m, y = 0.600m)?
The small block with a mass of 0.0400 kg is moving in the xy-plane, and its net force is described by the potential energy function (x) = (5.80 m^2/ )x^2 - (3.60 m^3/ )y^3. The magnitude of the acceleration is approximately 130.8 m/s^2, and its direction is approximately 48.1 degrees below the negative x-axis.
To find the acceleration, we start by calculating the force acting on the block using the negative gradient of the potential energy function. Taking the partial derivatives of the potential energy function with respect to x and y, we obtain the force components ∂U/∂x and ∂U/∂y.
By substituting the given coordinates (x = 0.300m, y = 0.600m) into the partial derivatives, we find the force components Fx and Fy. Using Newton's second law (F = ma), we divide the force components by the mass of the block to obtain the acceleration components ax and ay.
To calculate the magnitude of the acceleration, we use the Pythagorean theorem to find the square root of the sum of the squares of the acceleration components. This yields the magnitude |a| ≈ 130.8 m/s^2.
To determine the direction of the acceleration, we use the inverse tangent function (tan^(-1)) with the ratio of the acceleration components ay/ax. This gives us the angle θ, which is approximately -48.1 degrees.
In summary, the magnitude of the acceleration is approximately 130.8 m/s^2, and its direction is approximately 48.1 degrees below the negative x-axis.
To know more about magnitude of the acceleration, click here: brainly.com/question/20115074
#SPJ11
- Problem No. 2.6 / 10 pts. X] + 3 x2 + 4x3 = -4 2 x1 + 4 x2 – x3 = -1 - X1 – x2 + 3 x3 -5 Solve the system of linear equations by modifying it to REF and to RREF using equivalent elementary operations. Show REF and RREF of the system. Matrices may not be used. Show all your work, do not skip steps. Displaying only the final answer is not enough to get credit.
The option to the gadget of equations is:
[tex]x1[/tex] = 3, [tex]x2[/tex] = 1, and [tex]x3[/tex] = -1
To resolve the given device of linear equations, we are able to carry out row operations to transform the system into a row echelon shape (REF) and then into decreased row echelon shape (RREF).
Step 1: Write the augmented matrix for the system of equations:
[tex]\left[\begin{array}{ccccc}-1&3&4&|&-4\\2&4&-1&|&-1\\-1&-1&3&|&-5\end{array}\right][/tex]
Step 2: Perform row operations to reap row echelon shape (REF):
[tex]R2 = R2 - 2R1[/tex]
[tex]R3 = R3 + R1[/tex]
[tex]\left[\begin{array}{ccccc}-1&3&4&|&-4\\0&-2&-9&|&7\\0&2&7&|&-9\end{array}\right][/tex]
[tex]R3 = R3 + R2[/tex]
[tex]\left[\begin{array}{ccccc}1&3&4&|&-4\\0&-2&-9&|&7\\0&2&-2&|&-2\end{array}\right][/tex]
Step 3: Perform row operations to attain reduced row echelon shape (RREF):
[tex]R2 = (-1/2)R2[/tex]
[tex]R3 = (-1/2)R3[/tex]
[tex]\left[\begin{array}{ccccc}1&3&4&|&-4\\0&1&-9/2&|&7/2\\0&0&-1&|&1\end{array}\right][/tex]
[tex]R1 = R1 - 3R2[/tex]
[tex]R3 = -R3[/tex]
[tex]\left[\begin{array}{ccccc}1&0&-17/2&|&5/2\\0&1&9/2&|&-7/2\\0&0&1&|&-1\end{array}\right][/tex]
[tex]R1 = R1 + (17/2)R3[/tex]
[tex]R2 = R2 - (9/2)R3[/tex]
[tex]\left[\begin{array}{ccccc}1&0&0&|&3\\0&1&0&|&1\\0&0&1&|&-1\end{array}\right][/tex]
The system is now in row echelon form (REF) and reduced row echelon form (RREF).
REF:
[tex]\left[\begin{array}{ccccc}1&0&0&|&3\\0&1&0&|&1\\0&0&1&|&-1\end{array}\right][/tex]
RREF:
[tex]\left[\begin{array}{ccccc}1&0&0&|&3\\0&1&0&|&1\\0&0&1&|&-1\end{array}\right][/tex]
The option to the gadget of equations is:
[tex]x1[/tex] = 3
[tex]x2[/tex] = 1
[tex]x3[/tex] = -1
To know more about linear equations,
https://brainly.com/question/28871326
#SPJ4
Construct a grammar over {a, b} whose language is {a mb n : 0 ≤ n ≤ m ≤ 3n}
To construct a grammar over {a, b} whose language is {a mb n : 0 ≤ n ≤ m ≤ 3n}, the following rules can be used: S → AB | BABA → aAb | aSb | bA | bB | AAB → aAb | aSb | bAS → In the above grammar rules, S is the starting symbol. Now, let's check if this grammar is fulfilling the given requirements or not. Let's start with the base condition i.e., n = 0If n = 0, then the language is {ε} and S → ε is a valid rule.
Next, let's check for n = 1If n = 1, the language is {a, ab} and A → a, B → b or A → aSb are valid rules for generating these strings. Now, let's check for n = 2If n = 2, the language is {aa, aab, abb, abbb} and the following rules are valid: A → aAbB → bBaS → AB or B |
Thus, all the strings can be generated using the above rules. Lastly, let's check for n = 3If n = 3, the language is {aaa, aaab, aabb, aabbb, abbb, abbbb, bbb, bbbb} and the following rules are valid:A → aAbB → bBaS → AB or B | Thus, all the strings can be generated using the above rules. Hence, the grammar over {a, b} whose language is {a mb n : 0 ≤ n ≤ m ≤ 3n} is S → AB | BABA → aAb | aSb | bA | bB | AAB → aAb | aSb | bAS.
To know more about Grammar rules, click here:
https://brainly.com/question/30235282
#SPJ11
Take the sample mean of this data series: 15, 26, 25, 23, 26, 28, 20, 20, 31, 45, 32, 41, 54, 23, 45, 24, 90, 19, 16, 75, 29 And the population mean of this data series: 15, 26, 25, 23, 26, 28, 20, 20, 31, 45, 32, 41, 54, 23, 45, 24, 90, 19, 100, 75, 29 Calculate the difference between the two quantities (round to two decimal places). There is some data that is skewed right. Where are the median and mode in relation to the mean? O 1. to the left. O II. to the right O WI. exactly on it O IV. there is no mean; so there is no relationship.
The median is to the right of the mean (II), and there is no mode (IV).
The sample mean of the data series is calculated by adding up all the values and dividing by the number of values:
Sample mean = (15 + 26 + 25 + 23 + 26 + 28 + 20 + 20 + 31 + 45 + 32 + 41 + 54 + 23 + 45 + 24 + 90 + 19 + 16 + 75 + 29) / 21 ≈ 32.33
The population mean of the data series is also calculated in the same way:
Population mean = (15 + 26 + 25 + 23 + 26 + 28 + 20 + 20 + 31 + 45 + 32 + 41 + 54 + 23 + 45 + 24 + 90 + 19 + 100 + 75 + 29) / 21 ≈ 35.52
The difference between the sample mean and the population mean is:
Difference = Sample mean - Population mean
= 32.33 - 35.52
≈ -3.19
The median is the middle value of a data set when it is arranged in ascending order. In this case, the data set is not provided in ascending order, so we need to sort it first:
15, 16, 19, 20, 20, 23, 23, 24, 25, 26, 26, 28, 29, 31, 32, 41, 45, 45, 54, 75, 90
The median is the value in the middle of this sorted data set, which is 26.
The mode is the value that appears most frequently in the data set. In this case, there are no repeated values, so there is no mode.
Therefore, the median is to the right of the mean (II), and there is no mode (IV).
To know more about median click here :
https://brainly.com/question/32713255
#SPJ4
Find the rate of change. y = 6x-7
The equation y = 6x - 7 represents a straight line with a slope of 6, indicating a constant rate of change in the y-direction as x varies.
The rate of change in the given equation y = 6x - 7 can be determined by taking the derivative of y with respect to x. The derivative represents the instantaneous rate of change of y with respect to x at any given point.
To find the derivative of y = 6x - 7, we differentiate each term separately. The derivative of 6x with respect to x is simply 6 since the derivative of x^n (where n is a constant) is nx^(n-1). The derivative of -7 with respect to x is 0 since -7 is a constant.
Therefore, the derivative of y = 6x - 7 is dy/dx = 6.
This means that for every unit increase in x, the value of y increases by a constant rate of 6. The rate of change is constant and equal to 6 for all values of x.
In other words, the equation y = 6x - 7 represents a straight line with a slope of 6, indicating a constant rate of change in the y-direction as x varies.
Know more about Constant here:
https://brainly.com/question/31730278
#SPJ11
if x has a binomial distribution with n = 150 and the success probability p = 0.4, fnd the following probabilities approximately:
a. P(48 < X < 66) b. P(X> 69) c. P(48 X < 65) d. P(X < 60) e. P(X<60)
if x has a binomial distribution with n = 150 and the success probability p = 0.4, find the following probabilities are
a. P(48<X<66)≈0.9545
b. P(X>69)≈0.0228
c. P(48≤X≤65)≈0.8413
d. P(X<60)≈0.1587
e. P(X≤60)≈0.5000
We will utilize the typical guess to the binomial dispersion to discover the taking after probabilities.
For binomial dissemination with n trials and victory likelihood p, the cruel is np and the standard deviation is √{np(1-p)}.
In this case, n=150 and p=0.4, so the cruel is np=60 and the standard deviation is √{np(1-p)}=6.
a) To discover the probability that X is between 48 and 66, we will utilize the typical estimation to discover the region beneath the typical bend between 48 and 66. This area is roughly 0.9545.
b) To discover the likelihood that X is more noteworthy than 69, we are able to utilize the ordinary estimation to discover the zone under the typical bend to the proper of 69. This zone is around 0.0228.
c) To discover the likelihood that X is between 48 and 65, we will utilize the typical estimation to discover the range beneath the ordinary bend between 48 and 65. This range is roughly 0.8413.
d) To discover the likelihood that X is less than 60, we will utilize the typical estimation to discover the range beneath the ordinary bend to the cleared out of 60. This range is around 0.1587.
e) To discover the likelihood that X is less than or rises to 60, ready to utilize the typical estimation to discover the range beneath the ordinary bend to the cleared out of 60. This range is around 0.5000.
In this manner, the surmised probabilities are as takes after:
a. P(48<X<66)≈0.9545
b. P(X>69)≈0.0228
c. P(48≤X≤65)≈0.8413
d. P(X<60)≈0.1587
e. P(X≤60)≈0.5000
To know more about probability refer to this :
https://brainly.com/question/251701
#SPJ4
graph f(x)=2x−1 and g(x)=−x 5 on the same coordinate is the solution to the equation f(x)=g(x)?enter your answer in the box.
The graph of f(x) = 2x - 1 is a line with a slope of 2 and a y-intercept of -1. The graph of g(x) = -x^(-5) is an exponential function that decreases rapidly as x approaches negative infinity. The two graphs intersect at the point (-1, -1). Therefore, the solution to the equation f(x) = g(x) is x = -1.
To graph f(x) = 2x - 1, we can start by plotting the point (0, -1). Then, we can move 2 units to the right and 1 unit up to get the point (1, 0). We can continue to do this to plot more points on the graph. The graph of f(x) = 2x - 1 will be a line with a slope of 2 and a y-intercept of -1.
To graph g(x) = -x^(-5), we can start by plotting the point (1, -1). Then, we can move 1 unit to the left and 1/5 unit down to get the point (0.9, -1.2). We can continue to do this to plot more points on the graph.
The graph of g(x) = -x^(-5) will be an exponential function that decreases rapidly as x approaches negative infinity.
The two graphs intersect at the point (-1, -1). Therefore, the solution to the equation f(x) = g(x) is x = -1.
Learn more about exponential function here
brainly.com/question/29287497
#SPJ11
Let E and F be events with P(E) = 0.3, P(F) = 0.6 and P(EU F) = 0.7 a. P( EF) b. P(E|F) PECF) d. P( EF)
a. P(E ∩ F) = 0.2
b. P(E|F) ≈ 0.333 or 33.3%
c. P(E ∪ F) = 0.7
d. P(E ∩ F) = 0.2
a. P(E ∩ F):
To find the probability of the intersection of events E and F, denoted as E ∩ F, we use the formula:
P(E ∩ F) = P(E) + P(F) - P(E ∪ F).
Given that P(E) = 0.3, P(F) = 0.6, and P(E ∪ F) = 0.7, we can substitute these values into the formula:
P(E ∩ F) = 0.3 + 0.6 - 0.7 = 0.2.
Therefore, the probability of the intersection of events E and F, P(E ∩ F), is 0.2.
b. P(E|F):
To find the conditional probability of event E given event F, denoted as P(E|F), we use the formula:
P(E|F) = P(E ∩ F) / P(F).
We have already determined that P(E ∩ F) = 0.2 and given that P(F) = 0.6, we can substitute these values into the formula:
P(E|F) = 0.2 / 0.6 = 1/3 ≈ 0.333.
Therefore, the conditional probability of event E given event F, P(E|F), is approximately 0.333 or 33.3%.
c. P(E U F):
The probability of the union of events E and F, denoted as E ∪ F, is already given as P(E ∪ F) = 0.7.
d. P(E ∩ F):
We have already determined in part a that P(E ∩ F) = 0.2. Therefore, this is the probability of the intersection of events E and F.
To know more about the probability, click here;
https://brainly.com/question/31828911
#SPJ11
The diameter of bearings produced in a production line is monitored using a control chart with 3-standard deviation control limits. The mean and standard deviation are estimated to be 1.6 cm and 0.3 mm, respectively. The sample size is 9. Suppose the mean diameter of the bearings being produced in the production line has been shifted to 1.65 cm after operating for a month. Determine the ARL (average run length) after the shift.
The ARL (average run length) after the shift is approximately 222.22.
The ARL (average run length) after the shift can be determined from the control chart that monitors the diameter of bearings produced in a production line using 3-standard deviation control limits.
A standard deviation is a statistic that shows how widely values are spread from the average value (mean). A lower standard deviation implies that most values are very close to the average, whereas a higher standard deviation indicates that the values are more spread out. It is used to measure the amount of variation or dispersion of a set of values. The square root of the variance is the standard deviation.
ARL (average run length) is the average number of samples that may be examined before a control chart signals that an out-of-control situation has arisen. It's a measure of a control chart's efficiency in identifying out-of-control circumstances.
Let's solve the given problem: Mean (μ) = 1.6 cm, Standard deviation (σ) = 0.3 mm, Sample size (n) = 9
The sample mean is shifted to 1.65 cm after operating for a month.
The shift is = 1.65 - 1.6 = 0.05 cm = 0.5 mm.The new mean (μ') = 1.65 cm = 16.5 mm.The new standard deviation (σ') remains the same, which is 0.3 mm.The new control limits with a 3-standard deviation shift in the mean will be:UCL = μ' + 3σ' = 16.5 + 3(0.3) = 17.4 mmLCL = μ' - 3σ' = 16.5 - 3(0.3) = 15.6 mmThe width of the control limits is: WL = UCL - LCL = 17.4 - 15.6 = 1.8 mmThe ARL (average run length) after the shift can be calculated as follows:
ARL = (1 / α) * (WL / 6σ'), where α = 0.0027 (the area under the normal curve beyond 3 standard deviations on each side)
Substituting the given values, we have: ARL = (1 / 0.0027) * (1.8 / (6 * 0.3)) = 222.22.
Therefore, the ARL (average run length) after the shift is approximately 222.22.
To know more about standard deviation, visit the link : https://brainly.com/question/475676
#SPJ11
Grading on the curve implies what type of evaluation comparison?
Which of the following is a semiobjective item?
true false
matching
essay
short-answer
Grading on the curve implies a relative evaluation comparison, where the performance of students is ranked and graded based on their position relative to the rest of the class. Among the given options, the semiobjective item is "matching."
How to explain the informationA matching item typically involves matching items from one column with items in another column based on their relationship or similarity. While there may be some subjectivity involved in determining the correct matches, it usually allows for a more objective evaluation compared to essay or short-answer questions, which can be more open-ended and subjective in nature.
The options "true" and "false" are objective items that typically involve selecting the correct statement among the two provided choices.
Learn more about curve on
https://brainly.com/question/31376454
#SPJ4
Suppose that A1 , A2 and B are events where A1 and A2 are mutually exclusive events and P(A1) = .7 P(A2) = .3 P(B¦A1) = .2 P(B¦A2) = .4
i. Find P(B)
ii. Find P(A1¦B)
iii. Find P(A2¦B)
The probability of event B, P(B), is 0.26.The conditional probability of event A1 given event B, P(A1|B), is approximately 0.5385. The conditional probability of event A2 given event B, P(A2|B), can be calculated using the complement rule.
(i) To find the probability of event B, we use the law of total probability. Since A1 and A2 are mutually exclusive events, the probability of B can be calculated by summing the products of the conditional probabilities and the probabilities of A1 and A2.
(ii) To find the conditional probability of A1 given B, we use Bayes' theorem. Bayes' theorem relates the conditional probability of A1 given B to the conditional probability of B given A1, which is given, and the probabilities of A1 and B.
(iii) To find the conditional probability of A2 given B, we can use the complement rule. Since A1 and A2 are mutually exclusive, P(A2) = 1 - P(A1). Then, using Bayes' theorem, we can calculate P(A2|B) in a similar manner to P(A1|B).
By applying these principles, we can determine the probabilities of A1 and A2 given the information provided.
To learn more about conditional probability click here :
brainly.com/question/10567654
#SPJ11
Find the general solution of the nonhomogeneous differential equation, 2y"' + y" + 2y' + y = 2t² + 3.
The general solution of the nonhomogeneous differential equation 2y"' + y" + 2y' + y = 2t² + 3 is obtained by combining the general solution of the corresponding homogeneous equation with a particular solution of the nonhomogeneous equation. The general solution can be expressed as [tex]y = y_h + y_p[/tex], where [tex]y_h[/tex] represents the general solution of the homogeneous equation and [tex]y_p[/tex] represents a particular solution of the nonhomogeneous equation.
To find the general solution, we first solve the associated homogeneous equation by assuming [tex]y = e^(^r^t^)[/tex]. By substituting this into the equation, we obtain the characteristic equation 2r³ + r² + 2r + 1 = 0. Solving this cubic equation, we find three distinct roots: r₁, r₂, and r₃.
The general solution of the homogeneous equation is given by y_h = c₁e^(r₁t) + c₂e^(r₂t) + c₃e^(r₃t), where c₁, c₂, and c₃ are arbitrary constants.
Next, we find a particular solution of the nonhomogeneous differential equation using the method of undetermined coefficients or variation of parameters. Let's assume a particular solution in the form of [tex]y_p = At^2 + Bt + C[/tex], where A, B, and C are constants to be determined.
We substitute this particular solution into the differential equation and equate coefficients of like terms. By solving the resulting system of equations, we determine the values of A, B, and C.
Finally, the general solution of the nonhomogeneous equation is obtained by adding the homogeneous solution and the particular solution: [tex]y = y_h + y_p[/tex].
In summary, the general solution of the nonhomogeneous differential equation 2y"' + y" + 2y' + y = 2t² + 3 is given by [tex]y = y_h + y_p[/tex], where [tex]y_h[/tex] represents the general solution of the associated homogeneous equation and [tex]y_p[/tex] represents a particular solution of the nonhomogeneous equation.
To learn more about Differential equations, visit:
https://brainly.com/question/18760518
#SPJ11
The data set below represents a sample of scores on a 10-point quiz. 7, 4, 9, 6, 10, 9, 5, 4 1 Find the sum of the mean and the median. 14.25 12.75 12.25 15.50 13.25 In a certain state, 36% of adults drive every day. Suppose a random sample of 625 adults from the state is chosen. Let X denote the number in the sample who drive every day. Find the value of X that is two standard deviations above the mean. 237 513 249 201 225 Lifetimes of batteries of a certain type are normally distributed with mean 42.6 hours and standard deviation 2.8 hours. Find the lifetime in hours that would separate the 7.5% of batteries with the shortest lifetimes from the rest. 38.57 40.50 45.80 42.39 35.80 Find the number of US adults that must be included in a poll in order to estimate, with margin of error 1.5%, the percentage that are concerned about high gas prices. Use a 94% confidence level, and assume about 79% are concerned about gas prices. 2607 2259 1387 603 3928
The number of US adults that must be included in the poll is 3128.
To find the number of US adults that must be included in a poll in order to estimate the percentage concerned about high gas prices with a margin of error of 1.5% and a 94% confidence level, we can use the formula for sample size calculation.
The formula for calculating the sample size needed for estimating a proportion is:
n = (Z^2 * p * (1-p)) / E^2
where:
n = sample size
Z = Z-score corresponding to the desired confidence level
p = estimated proportion
E = margin of error
Given that the confidence level is 94%, the Z-score can be found using a standard normal distribution table. For a 94% confidence level, the Z-score is approximately 1.88.
The estimated proportion of adults concerned about gas prices is 79%, which can be expressed as 0.79.
The margin of error is 1.5%, which can be expressed as 0.015.
Substituting these values into the formula:
n = (1.88^2 * 0.79 * (1-0.79)) / 0.015^2
Simplifying the equation:
n = (3.5344 * 0.79 * 0.21) / 0.000225
n ≈ 3127.4976
Rounding up to the nearest whole number, the number of US adults that must be included in the poll is 3128.
For more such question on poll. visit :
https://brainly.com/question/12496604
#SPJ8
Find the solution of the initial-value problem y" - 55" +9y' - 45y = sec 3t, y(0) = 2, 7(0) = 0, "(0) = 33. A fundamental set of solutions of the homogeneous equation is given by the functions: y(t) = eat, where a = = yz(t) yz(t) = = A particular solution is given by: et Y(t) = - Ids. yı(t) to ])ºyalt) + • 43(t) Therefore the solution of the initial-value problem is: y(t) +Y(t)=__.
To solve the initial-value problem, we find the complementary solution by solving the associated homogeneous equation, which yields yc(t) = C1e^(56.909t) + C2e^(-0.909t). The particular solution is found using the method of undetermined coefficients. The general solution is given by y(t) = yc(t) + yp(t), and the specific solution satisfying the initial conditions can be obtained by substituting the values and solving for the constants.
To solve the given initial-value problem, we will find the particular solution and the complementary solution.
1. Finding the complementary solution:
The homogeneous equation associated with the given initial-value problem is y" - 55y' + 9y' - 45y = 0. To find the complementary solution, we solve this homogeneous equation. The characteristic equation is obtained by substituting y(t) = e^(at) into the homogeneous equation:
(a^2 - 55a + 9) e^(at) - 45e^(at) = 0
Simplifying, we get:
a^2 - 55a + 9 - 45 = 0
a^2 - 55a - 36 = 0
Using the quadratic formula, we find two solutions for 'a': a1 ≈ 56.909 and a2 ≈ -0.909. Therefore, the complementary solution is given by:
yc(t) = C1e^(56.909t) + C2e^(-0.909t), where C1 and C2 are arbitrary constants.
2. Finding the particular solution:
To find the particular solution, we need to solve the non-homogeneous part of the equation, which is sec(3t). A particular solution can be found using the method of undetermined coefficients. We assume a particular solution of the form:
yp(t) = A sec(3t)
Differentiating twice and substituting into the non-homogeneous equation, we can solve for the constant A.
3. Solution of the initial-value problem:
Now we have the complementary solution yc(t) and the particular solution yp(t). The general solution of the initial-value problem is given by:
y(t) = yc(t) + yp(t) = C1e^(56.909t) + C2e^(-0.909t) + A sec(3t)
To find the specific solution that satisfies the initial conditions, substitute y(0) = 2, y'(0) = 0, and y''(0) = 33 into the above equation and solve for the constants C1, C2, and A.
Note: Please note that the provided solution is only a general outline of the process. Calculating the specific values of the constants and solving the initial-value problem would involve further calculations.
Learn more about initial-value problem:
https://brainly.com/question/30782698
#SPJ11
use normal vectors to determine the intersection, if any, for for following group of three planes. give a geometric interpretation of your result and state the number of solutions for the corresponding linear system of equations.
x-y+z=-2
2x-y-2z =-9
3x+y-z=-2
b. if the planes intersect in a line, determine a vector equation of the line. if the planes intersect in a point, the corridinates of the point
The three planes intersect at a single point with coordinates (-3, -1, 0). Geometrically, this means that the three planes intersect at a specific point in three-dimensional space. The corresponding linear system of equations has a unique solution.
To determine the intersection of the three planes, we can first find the normal vectors of each plane. The normal vectors are obtained by taking the coefficients of x, y, and z in the equation of each plane.
The normal vectors for the three planes are:
Plane 1: (1, -1, 1)
Plane 2: (2, -1, -2)
Plane 3: (3, 1, -1)
Since the planes intersect, their normal vectors must be linearly independent. We can check this by forming a 3x3 matrix with the normal vectors as rows and computing its determinant. If the determinant is non-zero, the vectors are linearly independent. The determinant of the matrix [ (1, -1, 1), (2, -1, -2), (3, 1, -1) ] is 6, which is non-zero. Therefore, the normal vectors are linearly independent, and the three planes intersect at a single point. To find the coordinates of the intersection point, we can solve the corresponding linear system of equations formed by the three plane equations:
x - y + z = -2
2x - y - 2z = -9
3x + y - z = -2
Solving this system, we find that x = -3, y = -1, and z = 0. Therefore, the three planes intersect at the point (-3, -1, 0). Geometrically, this means that the three planes intersect at a specific point in three-dimensional space. The vector equation of the line formed by the intersection of the planes is r = (-3, -1, 0) + t(0, 0, 0), where t is a parameter representing any real number. Since there is only one point of intersection, the linear system of equations has a unique solution.
learn more about vectors here:
https://brainly.com/question/24256726?
#SPJ11
Given a data set with n = 27 observations, containing
one independent variable, find the critical value for an
F-test at α = 2.5% significance.
Show your answer with four decimal places.
The critical value for an F-test at α = 2.5% significance with one independent variable and 27 observations is approximately 5.7033. It represents the threshold beyond which we reject the null hypothesis in favor of the alternative hypothesis.
To determine the critical value for an F-test at α = 2.5% significance, we need to know the degrees of freedom associated with the numerator and denominator of the F-statistic.
For an F-test, the numerator degrees of freedom (df1) correspond to the number of groups or treatment conditions minus 1. In this case, since there is only one independent variable, the number of groups is 2 (assuming a standard F-test), so df1 = 2 - 1 = 1.
The denominator degrees of freedom (df2) correspond to the total number of observations minus the number of groups. In this case, we have n = 27 observations and 2 groups, so df2 = 27 - 2 = 25.
Now we can use these degrees of freedom values and the significance level (α) to find the critical value using an F-table or calculator.
Using statistical software or an online calculator, the critical value for an F-test with df1 = 1 and df2 = 25 at α = 2.5% significance is approximately 5.7033 (rounded to four decimal places).
Therefore, the critical value for the F-test at α = 2.5% significance is 5.7033.
To know more about critical value refer here:
https://brainly.com/question/32607910#
#SPJ11
if the median of a data set is 8 and the mean is 10, which of the following is most likely?
You didn't provide a list of assumptions, but I would say that high points in the data set brought the mean up, and the rest of the points are around the median. In this scenario, I think there is at least one outlier bringing the mean up significantly. However, if the outlier is excluded from the data, the average would be slightly lower but still a better representation of the data.
Based on the given information, it is likely that the data set is positively skewed.
In a positively skewed distribution, the mean is typically larger than the median. Since the mean is 10 and the median is 8 in this case, it suggests that there are some relatively larger values in the data set that are pulling the mean upward. This indicates a skewness towards the higher end of the data.
In a positively skewed distribution, the most likely scenario is that there are a few exceptionally large values in the data set, which contribute to the higher mean but do not significantly affect the median. These outliers or extreme values can cause the mean to be larger than the median, indicating a rightward tail in the distribution.
To know more about median click here: brainly.com/question/11237736 #SPJ11
Find the mean, median, and mode(s) for the given sample data. Round to two decimal places as needed. 6) The amount of time in hours) that Sam studied for an exam on each of the last five days is 6) given below. 2.7 8.3 6.8 2.1 5.1
The mean value of the sample data is 5.8 hours.
The median value of the sample data is 5.95 hours.
Mode of the given sample data are:\[\begin{array}{l}\text{Mean} = 5.8\,\,\text{hours}\\\\\text{Median} = 5.95\,\,\text{hours}\\\\\text{Mode} = \text{none}\end{array}\]
Given sample data (hours): 2.7, 8.3, 6.8, 2.1, 5.1.
To find mean, median, and mode(s), we need to arrange the sample data in ascending order, as follows:2.1, 2.7, 5.1, 6.8, 8.3
(a) Mean: The mean is the sum of all data values divided by the number of data values. So, we have:\[\text{Mean} = \frac{{2.1 + 2.7 + 5.1 + 6.8 + 8.3}}{5} = 5.8\]Therefore, the mean value of the sample data is 5.8 hours.
(b) Median: The median is the middle value of the sample data, after it has been sorted. So, we have:Median = (5.1 + 6.8) / 2 = 5.95Therefore, the median value of the sample data is 5.95 hours.
(c)Mode: The mode is the most frequently occurring value in the sample data. Here, we don't have any repeating value.
Therefore, there is no mode for this sample data.
Finally, the mean, median, and mode of the given sample data are:\[\begin{array}{l}\text{Mean} = 5.8\,\,\text{hours}\\\\\text{Median} = 5.95\,\,\text{hours}\\\\\text{Mode} = \text{none}\end{array}\]
To know more about mean visit:
https://brainly.com/question/1136789
#SPJ11
The given sample data is {2.7, 8.3, 6.8, 2.1, 5.1}.
Now, we have to find the mean, median, and mode(s) for the given data.
Mean:The formula to find the mean of n given data is;
$$\bar{x} = \frac{1}{n}\sum_{i=1}^{n}x_i$$
Here, n = 5, and the given data is {2.7, 8.3, 6.8, 2.1, 5.1}.
So, putting these values in the formula, we get;
$$\bar{x} = \frac{1}{5}\left(2.7+8.3+6.8+2.1+5.1\right)$$$$\bar{x} = \frac{1}{5}\left(25\right)$$$$\bar{x} = 5$$
Therefore, the mean of the given sample data is 5.
Median:Arrange the given data in ascending order.{2.1, 2.7, 5.1, 6.8, 8.3}
The median is the middle value of the given data. Here, the number of data is odd, and the middle value is
Therefore, the median of the given sample data is
Mode:The mode is the value that occurs the most number of times in the given data.
Here, all the values in the given data occur only once.
Therefore, there is no mode for the given data.
To know more about mean, visit:
https://brainly.com/question/31101410
#SPJ11
Match the real-world descriptions with the features they represent within the context of Melissa’s garden. Not all tiles will be used.
x-intercepts -
domain -
range -
y-intercept-
x-intercepts: Locations where a particular plant or feature starts or ends horizontally.
Domain: The range of acceptable values for a specific gardening parameter, such as temperature, soil pH, or sunlight hours.
Range: Possible outcomes or results based on the input values, such as the range of possible plant heights or flower colors.
y-intercept: A specific feature or measurement that exists at the starting point of a vertical axis, such as the initial height of a plant or the starting point of a garden path.
Let's match the real-world descriptions with the features within the context of Melissa's garden.
x-intercepts: The points where a graph intersects the x-axis. In the context of Melissa's garden, this could represent the locations where a particular plant or feature starts or ends horizontally.
Domain: The set of all possible input values or the independent variable in a function. In Melissa's garden, the domain could represent the range of acceptable values for a specific gardening parameter, such as temperature, soil pH, or sunlight hours.
Range: The set of all possible output values or the dependent variable in a function. In Melissa's garden, the range could represent the possible outcomes or results based on the input values, such as the range of possible plant heights or flower colors.
y-intercept: The point where a graph intersects the y-axis. In the context of Melissa's garden, this could represent a specific feature or measurement that exists at the starting point of a vertical axis, such as the initial height of a plant or the starting point of a garden path.
Now, let's match the descriptions with the corresponding features:
x-intercepts: Locations where a particular plant or feature starts or ends horizontally.
Domain: The range of acceptable values for a specific gardening parameter, such as temperature, soil pH, or sunlight hours.
Range: Possible outcomes or results based on the input values, such as the range of possible plant heights or flower colors.
y-intercept: A specific feature or measurement that exists at the starting point of a vertical axis, such as the initial height of a plant or the starting point of a garden path.
Please note that not all tiles will be used in this matching exercise.
Learn more about y intercept here:
https://brainly.com/question/14180189
#SPJ11
write a polynomial function with the given zeros and their corresponding multiplicities. there are many possible answers.
Zeros Mult.
7 3
-3 1
-1 3
g(x) = _____
The polynomial function is [tex]g(x) = x^7 - 18x^6 + 68x^5 - 118x^4 + 68x^3 - 21x^2 - 98x + 49[/tex]
What is meant by zeroes of a polynomial?
Zeroes of a polynomial function are the values of the variable for which the function evaluates to zero.
To construct a polynomial function with the given zeros and their corresponding multiplicities, we can use the factored form of a polynomial. Each zero will have a corresponding factor raised to its multiplicity.
Given zeros and their multiplicities:
Zeros: 7 (multiplicity 3), -3 (multiplicity 1), -1 (multiplicity 3)
To construct the polynomial function, we start with the factored form:
[tex]g(x) = (x - a)(x - b)(x - c)...(x - n)[/tex]
where a, b, c, ..., n are the zeros of the polynomial.
Using the given zeros and multiplicities, we can write the polynomial function as:
[tex]g(x) = (x - 7)^3 * (x + 3) * (x + 1)^3[/tex]
Explanation:
- The factor (x - 7) appears three times because the zero 7 has a multiplicity of 3.
- The factor (x + 3) appears once because the zero -3 has a multiplicity of 1.
- The factor (x + 1) appears three times because the zero -1 has a multiplicity of 3.
To expand the polynomial function [tex]g(x) = (x - 7)^3 * (x + 3) * (x + 1)^3[/tex] , we can use the distributive property and perform the necessary multiplication. Let's expand it step by step:
[tex]g(x) = (x - 7)^3 * (x + 3) * (x + 1)^3[/tex]
Expanding the first factor:
[tex]= (x - 7)(x - 7)(x - 7) * (x + 3) * (x + 1)^3[/tex]
Using the distributive property:
[tex]= (x^2 - 14x + 49)(x - 7) * (x + 3) * (x + 1)^3[/tex]
Expanding the second factor:
[tex]= (x^2 - 14x + 49)(x^2 - 4x - 21) * (x + 1)^3[/tex]
Using the distributive property again:
= [tex](x^4 - 18x^3 + 83x^2 - 98x + 49)(x + 1)^3[/tex]
Expanding the third factor:
[tex]= (x^4 - 18x^3 + 83x^2 - 98x + 49)(x^3 + 3x^2 + 3x + 1)[/tex]
Now, we can perform the multiplication of each term in the first polynomial by each term in the second polynomial, resulting in a polynomial of degree 7.
Therefore, the polynomial function with the given zeroes is [tex]g(x) = x^7 - 18x^6 + 68x^5 - 118x^4 + 68x^3 - 21x^2 - 98x + 49[/tex]
To know more about polynomial function, refer here:
https://brainly.com/question/11298461
#SPJ4