Helllp me you will git 16 points

Answer:

False

Hope it helps...

Have a great day :P

The memory hierarchy of a computer system organizes storage by using small, fast, expensive memories at the top of the hierarchy and supplementing them with larger, slower, cheaper memories at each successive level. Explain how the principle of memory locality makes such a system capable of providing efficient access to the data and instructions needed for executing programs.

Remember partially filled arrays where the number of elements stored in the array can be less than its capacity (the maximum number of elements allowed). We studied two different ways to represent partially filled arrays: 1) using an int variable for the numElems and 2) using a terminating value to indicate the end of elements called the sentinel value. In the code below, please fill in the details for reading values into the latter type of array that uses a sentilnel value. Don't forget to complete the printArray function.
#include
using namespace std;
void printArray(int array[]);
// Implement printArray as defined with one array parameter
int main()
{
const int CAPACITY=21;
int array[CAPACITY]; // store positive/negative int values, using 0 to indicate the end of partially filled array
cout <<"Enter up to " << CAPACITY-1 << " non-zero integers, enter 0 to end when you are done\n";
//To do: Write a loop to read up the int values and store them into array a.
// Stop reading if the user enters 0 or the array a is full.
//To do: store 0 to indicate the end of values in the array
//Display array function
printArray(array);
return 0;
}
// To do: implement display for the given array
void printArray(int array[])
{
}

HELP PLEASE
What will be printed to the console after this program runs?
var numbers = [2, 5, 3, 1, 6]
function changeNums(numList, addNum, subtractNum) {
for(var i=0; i if(numList[i] % 3 == 0){
numList[i] = numList[i] + addNum;
} else {
numList[i] = numList[i] - subtract Num;
}
}
}
changeNums (numbers, 3, 2);
console.log(numbers);

#include
#include
#include
#include
using namespace std;
class cypher_encryptor
{
string cypher;
public:
cypher_encryptor(string cypher)
{
this->cypher = cypher;
}
string encode(string original)
{
string result = original;
for (int i = 0; i < original.length(); i++)
{
if (original[i] == ' ') continue;
result[i] = cypher[original[i] - 'a'];
}
return result;
}
string decode(string secret)
{
string result = secret;
for (int i = 0; i < secret.length(); i++)
{
if (secret[i] == ' ') continue;
for (int j = 0; j <= 26; j++)
{
if (cypher[j] == secret[i])
{
result[i] = j + 'a';
}
}
}
return result;
}
};
class hacker
{
//Returns for each character the number of times it appears in the string
map* count_letters(string phrase)
{
// Your code starts here
// Your code ends here
}
//Returns for each count the characters that appears that number of times in the string
map>* by_counts(map counts)
{
// Your code starts here
// Your code ends here
}
public:
//Calculates the cypher using phrase as a reference and encoded
string get_cypher(string phrase, string encoded)
{
// Your code starts here
// Your code ends here
}
};
//After

Select the correct answer.
Which function returns the lowest value of a given set of numbers or range of cells?

A.
ROUND
B.
COUNT
C.
MAX
D.
MIN

This program reads a file called 'test.txt'. You are required to write two functions that build a wordlist out of all of the words found in the file and print all of the unique words found in the file. Remove punctuations using 'string.punctuation' and 'strip()' before adding words to the wordlist.
Write a function build_wordlist() that takes a 'file pointer' as an argument and reads the contents, builds the wordlist after removing punctuations, and then returns the wordlist. Another function find_unique() will take this wordlist as a parameter and return another wordlist comprising of all unique words found in the wordlist.
Example:
Contents of 'test.txt':
test file
another line in the test file
Output:
['another', 'file', 'in', 'line', 'test', 'the']
This the skeleton for 1:
#build_wordlist() function goes here
#find_unique() function goes here
def main():
infile = open("test.txt", 'r')
word_list = build_wordlist(infile)
new_wordlist = find_unique(word_list)
new_wordlist.sort()
print(new_wordlist)
main()

The function below takes one parameter: an integer (begin). Complete the function so that it prints the numbers starting at begin down to 1, each on a separate line. There are two recommended approaches for this: (1) use a for loop over a range statement with a negative step value, or (2) use a while loop, printing and decrementing the value each time. student.py 1 - def countdown_trigger(begin): 2 - for begin in range(begin, 0, -1): 3 print(begin)The function below takes one parameter: a list (argument_list). Complete the function to create a new list containing the first three elements of the given list and return it. You can assume that the provided list always has at least three elements. This can be implemented simply by creating (and returning) a list whose elements are the values at the zero'th, first and second indices of the given list. Alternatively, you can use the list slicing notation. student.py 1 - def make_list_of_first_three(argument_list): 2 WN Ist = argument_list[: 3 ] return IstIn the function below, return the (single) element from the input list input_list which is in the second to last position in the list. Assume that the list is large enough. student.py 1 - def return_second_to_last_element(input_list) :

If we need to manage a contiguous range of memory, handling requests to allocate various sized chunks, and later make those chunks free for reuse (as the malloc() and free() routines do in a C program), we have a number of linked list allocation algorithms that we could choose from. If our primary objective in allocating a chunk was to leave the smallest fragment possible after the allocation, which algorithm would we implement?a. slab allocator.b. worst-fit allocator.c. first-fit allocator.d. best-fit allocator.e. bit-map allocator.

Consider the following static method, calculate.

public static int calculate(int x)
{
x = x + x;
x = x + x;
x = x + x;

return x;
}
Which of the following can be used to replace the body of calculate so that the modified version of calculate will return the same result as the original version for all values of x?

return 8 * x;
return 3 + x;
return 3 * x;
return 6 * x;
return 4 * x;

Type the correct answer in the box. Spell all words correctly.
Before a new email application could be released to the public, it was released for a few days to some account holders of a website. The project team then collected feedback from this limited number of users and later made the email application available for public use. What type of testing did the project team use?
The project team used ____ testing for the email application.

c Write a recursive function called PrintNumPattern() to output the following number pattern.Given a positive integer as input (Ex: 12), subtract another positive integer (Ex: 3) continually until 0 or a negative value is reached, and then continually add the second integer until the first integer is again reached.

KAILANGAN ANG MASIDHI AT MALAWAKANG PAGBABASA NA SIYANG MAKAPAGBUBUKAS NG DAAN SA LAHAT NG KARUNUNGAN AT DISIPLINA TULAD NG AGHAM PANLIPUNAN, SYENSYA, MATEMATIKA, PILOSOPIYA, SINING ATN IBA PA.”

PLEASE HELP WILL MARK BRAINLEST!!


What are some inadvertent effects of technology?

import java.util.Scanner;

public class TemperatureConversion {
public static double celsiusToKelvin(double valueCelsius) {
double valueKelvin;

valueKelvin = valueCelsius + 273.15;

return valueKelvin;
}

/* Your solution goes here */

public static void main (String [] args) {
Scanner scnr = new Scanner(System.in);
double valueC;
double valueK;

valueC = 10.0;
System.out.println(valueC + " C is " + celsiusToKelvin(valueC) + " K");

valueK = scnr.nextDouble();
System.out.println(valueK + " is " + kelvinToCelsius(valueK) + " C");
}
}

How many cycles would it take to complete these multicycle instructions after pipelining assuming: Full forwarding 1 Adder that takes 2 cycles (subtraction uses the adder) 1 Multiplier that takes 10 cycles 1Divider that takes40 cycles 1 Integer ALU that takes1cycle(Loads and Stores) You can write and read from the register file in the same cycle. Begin your your cycle counting from 1 (NOT 0)

Define a single function named displayResults that returns nothing and takes two input parameters, an array of counters and the singular counter for the number of doubles rolled. The function displays the estimated probability of rolling doubles as well as the estimated probability of rolling each of the potential values from 1 to the maximum number that can be rolled (which can be calculated from the aforementioned input parameters). Recall, estimated probability is the calculated estimate of the theoretical probability of a scenario. To calculate an estimated probability we take the number of occurrences for a scenario and divide by the number of possible occurrences (the number of simulations).

PLZ HELP I DIDNT MEAN TO CLICK THAT ANSWR I NEEDD HELP

Jason works for a restaurant that serves only organic , local produce . What trend is this business following?

PLZ HELP !!!!!
plzzzz

Consider the following class declarations.

public class Dog
{
private String name;
public Dog()
{
name = "NoName";
}
}
public class Poodle extends Dog
{
private String size;
public Poodle(String s)
{

size = s;
}
}

The following statement appears in a method in another class.
Poodle myDog = new Poodle("toy");
Which of the following best describes the result of executing the statement?

a. The Poodle variable myDog is instantiated as a Poodle. The instance variable size is initialized to "toy". The instance variable name is not assiged a value.
b. The Poodle variable myDog is instantiated as a Poodle. The instance variable size is initialized to "toy". An implicit call to the no-argument Dog constructor is made, initializing the instance variable name to "NoName".
c. The Poodle variable myDog is instantiated as a Poodle. The instance variable size is initialized to "toy". An implicit call to the no-argument Dog constructor is made, initializing the instance variable name to "toy".
d. A runtime error occurs because super is not used to call the no-argument Dog constructor.
e. A runtime error occurs because there is no one-argument Dog constructor.

CEO of Entertainment Inc. wants to keep track of performance of engagement that the company has engaged. For each customer and agent, he wants to know total number of contracts by month, and monthly contract success ratio (calculated by total number of contracts expired each month divided by total amount of contract price each month). In addition, for each customer and agent he wants to know total numbers of contracts expired each week, and total number of contracts still active each week.

Required:
Provide 4-step dimensional model in the SQL and create data warehouse solution in SQL for the dimensional model that you propose.

You are asked to write a program that will display a letter that corresponds with a numeric rating system. The program should use a switch statement. The numeric rating is stored in a variable named rate and rate may equal 1, 2, 3, or 4. The corresponding letter is stored in a variable named grade and grade may be A, B, C, or D. Which is the test expression for this switch statement

What programming language does the LMC 'understand'?

Define a function named sum_values with two parameters. The first parameter will be a list of dictionaries (the data). The second parameter will be a string (a key). Return the sum of the dictionaries' values associated with the second parameter. You SHOULD NOT assume that all of the dictionaries in the first parameter will have the second parameter as a key. If none of the dictionaries have the second parameter as a key, your function should return 0. Sample function call: sum_values(data, 'estimated_annual_kwh_savings') sum_values_by_year

How can a user restore a message that was removed from the Deleted Items folder?


by dragging the item from Deleted Items to the Inbox

by dragging the item from Deleted Items to Restored Items

by clicking on "Recover items recently removed from this folder"

by clicking on the Restore button in the Navigation menu

1. Define Primary Key. Why do we need primary key ?

2. Define Field size.

3. Define Validation Rule.

4. . Not leaving the house and a lack of exercise can cause health problems like obesity. TRUE OR FALSE

5. Rebecca only works 3 days in a week but she works longer hours each day to ensure she hits the 40-hour work week.
-art-time working
-Compressed hours
-Job sharing
-Flexible hour

SummaryIn this lab, you complete a partially prewritten Java program that uses an array.The program prompts the user to interactively enter eight batting averages, which the program stores in an array. The program should then find the minimum and maximum batting average stored in the array as well as the average of the eight batting averages. The data file provided for this lab includes the input statement and some variable declarations. Comments are included in the file to help you write the remainder of the program.Instructions1.Ensure the file named BattingAverage.java is open.Write the Java statements as indicated by the comments.Execute the program by clicking "Run Code." Enter the following batting averages: .299, .157, .242, .203, .198, .333, .270, .190. The minimum batting average should be .157, and the maximum batting average should be .333. The average should be .2365.import java.util.Scanner;public class BattingAverage{public static void main(String args[]){Scanner s = new Scanner(System.in);// Declare a named constant for array size here.// Declare array here.// Use this integer variable as your loop index.int loopIndex;// Use this variable to store the batting average input by user.double battingAverage;// String version of batting average input by user.String averageString;// Use these variables to store the minimim and maximum batting averages.double min, max;// Use these variables to store the total and the average.double total, average;// Write a loop to get batting averages from user and assign to array.System.out.println("Enter a batting average: ");averageString = s.nextLine();battingAverage = Double.parseDouble(averageString);// Assign value to array.// Assign the first element in the array to be the minimum and the maximum.min = averages[0];max = averages[0];// Start out your total with the value of the first element in the array.total = averages[0];// Write a loop here to access array values starting with averages[1]// Within the loop test for minimum and maximum batting averages.// Also accumulate a total of all batting averages.// Calculate the average of the 8 averages.// Print the averages stored in the averages array.// Print the maximum batting average, minimum batting average, and average batting average.System.exit(0);}{

What is the difference between a 13 column abacus and 5 column abacus?

Which sequence represents the hierarchy of terms, from smallest to greatest?
Select one:
a. Database, table, record, field
O
b. Field, record, table, database
c. Record, field, table, database
d. Field, record, database, table​

What can relaxation help to reduce?

body image

stress

self-control

self-respect