Hello people ~
A current passes through a resistor. If K₁ and K₂ represent the average kinetic energy of the conduction electrons and the metal ions respectively then

(a) K₁ < K₂

(b) K₁ = K₂

(c) K₁> K₂

(d) any of these three may occur

Answers

Answer 1

Answer:

K1>K2

Explanation:

The main reason behind this is law of conservation of momentum

Momentum can neither be created nor endorsed.

But

the factor drift velocity affects the scenario.

Drift velocities of electrons is way more than velocities of ions so

K1 is greater than K2

Option C


Related Questions

What can you infer about the changes in the environment over time at the mystery fossil dig site? Record your inferences in the spaces provided.
Describe the environment in Egypt before the mystery fossil organism emerged.

Answers

the fossil informed us about the climatic and geographical changes that occurs in the environment over time.

What the mystery fossil dig site informed us about environment?

We can infer about the climate and geographical changes in the environment over time at the mystery fossil dig site because the fossil provides us information about the climatic condition as well as the geography of land when this fossil organism were alive.

So we can conclude that the fossil informed us about the climatic and geographical changes that occurs in the environment over time.

Learn more about fossil here: https://brainly.com/question/11829803

#SPJ1

C. A rocket moves from the velocity
2000ms ¹ to 6000 ms¹ after
moving as far as 80km. Calculate
the time taken by the rocket.
(20s)

Answers

Answer:

20s

Explanation:

t=d/(V2-V1)

t= 80000m/(6000-2000)

t= 20s

Emmett is lifting a box vertically. Which forces are necessary for calculating the total force?

Fp, Ff, and Fg
Fp and FN
Fp, FN, and Ff
Fp and Fg

Answers

The forces necessary for calculating the total force are Fp and Fg. The correct option is d.

What is gravity?

The force of attraction felt by a person at the center of a planet or Earth is called as the gravity.

The gravitational force, Fg is the attractive force exerted by the Earth on the object that is equal to the mass of the object times the gravitational acceleration.

Emmett is lifting a box vertically. There are only vertical forces acting on the box.

The vertical force must counteract the weight of the object, is the upward force applied on the object.

Thus, the forces necessary for calculating the total force is Fp - Fg.

Learn more about gravity.

brainly.com/question/4014727

#SPJ1

where is the strongest force coming from on scissors

Answers

Answer:

the handle

Explanation:

Which best describes why gravity on earth has a stronger attraction with you than the sun has with you?.

Answers

Answer:

Earth has a smaller mass than the Sun, but it is much closer to you than the Sun, allowing for a stronger attraction.

Explanation:

Science :)

Quasars are...
*
1 point
Areas with high activity in the centers of new galaxies
Gas Giant planets like Jupiter, but in other solar systems
Rocky planets like Earth or Mars, but in other solar systems
A pair of stars that are orbiting each other, so their spectrum keeps changing

Answers

Answer:

A quasar is an extremely luminous active galactic nucleus, powered by a supermassive black hole, with mass ranging from millions to tens of billions of solar masses, surrounded by a gaseous accretion disc.

Explanation:

first!

Which graph best represents the relationship between the acceleration of an object falling freely near the surface of Earth and the time that it falls?

Answers

Figure 4 is the graph which best represents the relationship between the acceleration of an object falling freely near the surface of Earth and time taken.

What is a Graph?

This is defined as a pictorial representation of data in an organized and defined manner.

The acceleration of an object falling freely near the surface of Earth is constant which is why option D was chosen.

Read more about Acceleration here https://brainly.com/question/460763

#SPJ1

An object is approaching you while making a sound.

What is perceived about the pitch of the sound?


It is perceived to be fluctuating.


It is perceived to be lower.


It is perceived to be higher.


It is perceived to be unchanged.

Answers

The pitch of the sound is perceived to be lower when an object is approaching you while making a sound.

What is sound?

Sound is a type of vibration capable of propagating in a suitable media (e.g., air or water).

The sound waves are called acoustic waves and they have a well-defined frequency and amplitude.

In conclusion, the pitch of the sound is perceived to be lower when an object is approaching you while making a sound.

Learn more about sound waves here:

https://brainly.com/question/1199084

#SPJ1

An object moves 20 m east in 30 s and then returns to its starting point taking an additional 50 s. If west is chosen as the positive direction, what is the sign associated with the average velocity of the object

Answers

The sign associated with the average velocity of the object is negative.

Average velocity of the object

The average velocity of the object is calculated as follows;

Average velocity = (v1 + v2)/2

v1 = -20/30 = -0.667 m/s

v2 = 20/50 = 0.4 m/s

Average velocity = (-0.667 + 0.4)/2

Average velocity  = -0.134 m/s

Thus, the sign associated with the average velocity of the object is negative.

Learn more about average velocity here: https://brainly.com/question/6504879

#SPJ1

A ray of monochromatic light (f = 5.09 × 10^14 hertz) in air is incident at an angle of 55°

Answers

Answer:

5161.26

Explanation:

5.09X1014=5161.26

In a hard disk drive, a constant torque of 14 N⋅m is applied to the magnetic disk when the drive starts recording data. The magnetic disk has a mass of 0.2 kg and radius 2m. Determine the magnitude of the angular acceleration of the disk? [please solve if you know]

Answers

The angular acceleration of the magnetic disk is determined as 35 rad/s².

Conservation of angular momentum

The angular acceleration of the disk is determined from the principle of conservation of angular momentum.

τ = Iα

where;

τ is torqueI moment of inertia of the diskα is angular acceleration of the disk

I = ¹/₂MR²

I = ¹/₂ x 0.2 x 2²

I = 0.4 kgm²

α = τ/I

α = (14)/(0.4)

α = 35 rad/s²

Thus, the angular acceleration of the disk is determined as 35 rad/s².

Learn more about angular acceleration here: https://brainly.com/question/25129606

#SPJ1

What is the magnetic field strength at point 1 in the figure? (figure 1)

Answers

The magnetic field strength at point 1 in the figure will be 6.67 ×10⁻⁵ T.

What is magnetic field strength?

The number of magnetic flux lines on a unit area passing perpendicular to the given line direction is known as induced magnetic field strength .it is denoted by B.

The magnetic field strength is found as;

[tex]B = \frac{\mu_0I}{2r} \\\\ \mu_0 = 4 \PI \times 10^{-7}[/tex]

In the formula,I denote current, and r denotes the distance between the point and the current carrying wire and magnetic field due to current in the bottom wire.

At point 1, the net magnetic field is found as the sum of magnetic field due to current in the top wire.

[tex]\rm B_{net} = B1_+(-B_2)[/tex]

[tex]B = \frac{ 4 \PI \times 10^{-7}I}{2r} \\\\ \rm B_{net} = B_1_+(-B_2)\\\\ \rm B_{net} = \frac{4 \times \pi \times 10^{-7} \times 10}{2 \times \pi \times 0.02} -\frac{4 \times \pi \times 10^{-7} \times 10 }{2 \times \pi \times 0.06} \\\\\ \rm B_{net} = 6.67 \times 10^{-5} T[/tex]

Hence, the magnetic field strength at point 1 in the figure will be 6.67 ×10⁻⁵ T.

To learn more about the strength of induced magnetic field, refer:

https://brainly.com/question/2248956

#SPJ4

Diverse crops can become vulnerable to pests, disease, and climate change. Which part of this statement is false?

Answers

The statement 'diverse crops can become vulnerable to pests, disease, and climate change' is considered false regarding this last point (climate change).

What is adaptation?

Adaptation is an evolutionary process where a species fits certain environmental conditions.

Plant species are intrinsically vulnerable to climate change because they are adapted to certain climate (temperature) conditions.

In conclusion, the statement 'diverse crops can become vulnerable to pests, disease, and climate change' is considered false regarding this last point (climate change).

Learn more about adaptation here:

https://brainly.com/question/1213023

#SPJ1

A 1-kg block is lifted vertically 1 m at constant speed by a boy. The work done by the boy is about:

Answers

Answer:

[tex]9.8\; {\rm J}[/tex], assuming that the gravitational field strength is [tex]g = 9.8\; {\rm N \cdot kg^{-1}}[/tex].

Explanation:

Notice that both the speed and the direction of motion of this block are constant. In other words, the velocity of this block is constant.

By Newton's Second Law, the net force on this block would be [tex]0[/tex]. External forces on this block should be balanced. Thus, the magnitude of the (downward) weight of this block should be equal to the magnitude of the (upward) force that the boy applies on this block.

Let [tex]m[/tex] denote the mass of this block. It is given that [tex]m = 1\; {\rm kg}[/tex]. The weight of this block would be:

[tex]\begin{aligned}\text{weight} &= m\, g \\ &= 1\; {\rm kg} \times 9.8\; {\rm N \cdot kg^{-1}} \\ &= 9.8\; {\rm N}\end{aligned}[/tex].

Hence, the force that the boy applies on this block would be upward with a magnitude of [tex]F = 9.8\; {\rm N}[/tex].

The mechanical work that a force did is equal to the product of:

the magnitude of the force, and the displacement of the object in the direction of the force.

The displacement of this block (upward by [tex]s = 1\; {\rm m}[/tex]) is in the same direction as the (upward) force that this boy had applied. Thus, the work that this boy had done would be the product of:

the magnitude of the force that this boy exerted, [tex]F = 9.8\; {\rm N}[/tex], andthe displacement of this block in the direction, [tex]s = 1\; {\rm m}[/tex].

[tex]\begin{aligned}\text{work} &= F\, s \\ &= 9.8\; {\rm N} \times 1\; {\rm m} \\ &= 9.8\; {\rm J}\end{aligned}[/tex].

If a car travels 20 km at a speed of 20km/h, what will the speed be for the remaining 20km if the average speed of the journey is 24km/h?

Answers

Answer:

12

Explanation:

avarage speed = total distance/total time

our total distance is 40km

the first 20km speed was 20km/h, so the time os 1 hour here

for the next 20km, we dont have the time, so let the time here be = x

so total time is x+1 km/h

and total distance is 40km

and the avarage is 24km/h

so =>

[tex] \frac{40}{1 + x} = 24[/tex]

solve for x to find the time in the second 20km

so x=0.6

then find the speed of the second 20km by diving the distance on time =>

[tex] \frac{20}{0.6} = 12[/tex]

so the speed in the second 20km is 12km/h

Given the information in the velocity vs. time graph, what is the displacement of the object after 1 second?

Answers

Answer:

V / T    is the slope of the graph

S = V / T       so the slope of the graph will be the displacement at that point

Even tho the above assumes uniform quantities, the instantaneous displacement at any time is the slope of the graph at that point in case one has a graph that is not a straight line.

Please answer if you know :)

Answers

Answer1. :(20/25)*200/*25 2. Increase the radius or apply the force perpendicular to the wrench

Explanation:torque =force*distance*sine of the angle between applied force and axis of wrench

The chart lists the masses and velocities of four objects.

A 3-column table with 4 rows titled Motion of 4 Objects. The first column labeled Object has entries W, X, Y, Z. The second column labeled Mass (kilograms) has entries 58, 34, 89, 60. The third column labeled Velocity (meters per second) has entries 1, 2, 0.5, 2.
Which object requires the greatest change in momentum in order to stop its motion?

W
X
Y
Z

Answers

The object which requires the greatest change in momentum in order to stop its motion is object Z.

What is momentum?

Momentum of any object is the product of the velocity of the object and its mass.

p =mv

Given is the chart lists the masses and velocities of four objects.

Object       Mass (kg)     Velocity (m/s)

  W               58                     1

  X                34                     2

  Y                89                    0.5

  Z                60                     2

Calculate the momentum for all the objects.

Momentum for W, p = 58 x 1 = 58 kg.m/s

Momentum for X, p = 34 x 2= 68 kg.m/s

Momentum for Y, p = 89 x 0.5 = 44.5 kg.m/s

Momentum for Z, p = 60 x 2 = 120 kg.m/s

On comparing the data from calculated momentum, we have a conclusion that highest momentum is for object Z.

Therefore, the object which requires the greatest change in momentum in order to stop its motion is object Z.

Learn more about momentum.

https://brainly.com/question/4956182

#SPJ1

Answer:

z

Explanation:

:)


Q2
Radioactive waste from nuclear power stations is a man-made source of background
radiation.
(a) Give one other man-made source of background radiation

Answers

Answer:

the clock hand of watch which have radium-226 for luminance

Which action would a chemist most likely take to determine how the
substances in a fuel affect the types of pollutants it produces when burned in
a car engine?

Answers

A PUC test would be the most likely course of action for a chemist. It is the most effective method for figuring out how the components of gasoline impact the kinds of pollutants.

What is air pollution?

The vapors created by gasoline evaporation and the chemicals produced by gasoline combustion cause impurity in the air known as air pollution.

When gasoline is burned, it emits carbon dioxide, a greenhouse gas.

Hence, the chemist's most likely action would be to do a PUC test.

To learn more about the air pollution refer to:

https://brainly.com/question/16357973

#SPJ1

1. A person weighing 1200 N is supported on an inflated air pillow. The total area of the soles of his shoes is 0.1 m². Calculate the minimum pressure of the air inside the pillow. ​

Answers

Answer:

[tex]\huge\boxed{\sf P = 12,000 \ Pa}[/tex]

Explanation:

Given:

Force = F = 1200 N

Area = A = 0.1 m²

Required:

Pressure = P = ?

Formula:

[tex]\displaystyle P = \frac{F}{A}[/tex]

Solution:

[tex]\displaystyle P = \frac{1200 \ N}{0.1 \ m^2} \\\\P = 12,000 \ Pa\\\\\rule[225]{225}{2}[/tex]

Answer:

P=3750

Explanation:

P=F/A

P=1200N/0.1m²

Find the square root of 0.1

square root of 0.1=0.316622776601

Approximate it =0.32

P=1200N/0.32M

Cross multiple=1200N=P0.32M

divide both side by

3750=P, P=3750

A disk with radius of 0. 5 m is free to rotate around its center without friction

Answers

The angular speed can't be determined without knowing the rotational inertia of the disk. The correct option is D.

What is rotational moment of inertia?

 It is the quantitative measure of the inertia when a body is rotating.

Given, radius of disk R= 0.5 m, Force F=2N, then torque developed will be

τ = F x R = 2 x 0.5 =1N..m

If m is the mass of disk, the rotational moment of inertia about center of disk is

I = mR²/2 = m(0.5)²/2 = m/8 kg.m²

The angular acceleration is α =τ/I = 1/(m/8) =8/m

Angular velocity ω =ω₀ +αt = 0+(8/m) x 1 =8/m rad/s

Thus, the correct option is D.

Learn more about rotational moment of inertia.

https://brainly.com/question/14838079

#SPJ4

Which describes an image that a concave mirror can make?

The image is always virtual.
The image can be either virtual or real.
The image is never upside down.
The image can only be the same size as the object.

Answers

Answer:

B. The image can either be virtual or real.

Explanation:

Concave mirrors can either produce real or virtual images. The image is upright given that it is virtual or real given that it is in front of the mirror. The images produced by the concave mirrors can also be reduced (in height), enlarged (in terms of size) or having same size as that of the object.

I hope this helps you understand about the images formed by concave mirrors.

Have a nice studies.

which wave carries the least energy?

Answers

Answer:

B

Explanation:

The answer is B, because the waves are farther apart then the others. And it also looks like radio waves, which carries the least energy.

Answer: The third one

Explanation: there isnt many waves in that one les waves = less energy and i took the quiz/test.

Estimate how long a 2500 W electric kettle would take to boil away 1.5 Kg of water . The specific latent heat of vaporization of water is 4000000 J / Kg .​

Answers

The time it would take a 2500 W electric kettle to boil away 1.5 Kg of water is 2400 seconds

How to calculate the time

Use the formula:

Power × time = mass × specific heat

Given mass = 1. 5kg

Specific latent heat of vaporization = 4000000 J/ Kg

Power = 2500 W

Substitute the values into the formula

Power × time = mass × specific heat

2500 × time = 1. 5 × 4000000

Make 'time' the subject

time = 1. 5 × 4000000 ÷ 2500 = 6000000 ÷ 2500 = 2400 seconds

Therefore, the time it would take a 2500 W electric kettle to boil away 1.5 Kg of water is 2400 seconds.

Learn more about specific latent heat of vaporization:

https://brainly.in/question/1580957

#SPJ1

A car is moving along a straight line op is shown below it moves from O to P in 8sec and return to p to q in 6sec. What is the average velocity and the speed of the car

Answers

Answer:

The answer would be A

Explanation:

Marking as brainliest last attempt

(ZOOM IN THE PHOTO)


write a paragraph about the topic : bullying in schools

Answers

Answer:

Bullying in the schools has negative effects on individual students and on the school climate as a whole. Bullying can cause long-term problems for both the victims of bullying and the bullies themselves. To explore the effects of bullying on adolescents, we will define bullying, identify the characteristics of bullies and victims, outline the extent and consequences of bullying, and present resources for further information and assistance.

Bullying is any behavior that is initiated by one or more students against a victim or victims that causes physical or psychological intimidation. Bullying behaviors can be classified as either direct (such as teasing, threatening, hitting, or stealing) or indirect (such as rumor spreading or social isolation). Boys typically employed direct methods of bullying, while girls tend to use in direct methods. Either way, behaviors must occur repeatedly overtime to be classified as bullying.

Characteristics of Bullies and Victims

There are specific behaviors that bullies tend to exhibit. The bullies often need to feel powerful and in control. They may feel no remorse when they inflict injury and suffering on others. Bullies tend to defy authority and are likely to break school rules. They seem to have little anxiety and appear to possess high self-esteem. Students who come from homes characterized by physical punishment tend to be more likely to exhibit these types of behaviors.

Victims also tend to exhibit specific characteristics. They are often anxious, insecure, cautious, and have low self-esteem. Victims tend to be socially isolated, and may lack social skills and friends. Because they tend to be weaker than their peers, either physically or socially, victims rarely retaliate against bullies. Students who have close ties with their parents/guardians or who have overprotective parents/guardians are more likely to be victimized by bullies.


A 12-kilogram mass has a kinetic energy of 150 joules. The speed of the object is
A.25.0 B.12.5 c.3.55 D.5.00

Answers

Answer:

OPTION D 5 m/s

Explanation:

0.5 × 12 × v² = 150

sqrt(150/6) = v

v = 5 m/s

Example 6
A proton is fired from far away toward the nucleus of an iron atom,
which we can model as a sphere containing 26 protons.
The diameter of the nucleus is 9.0 x 10-15 m.
What initial speed does the proton need to just reach the surface of
the nucleus?
*Assume the nucleus remains at rest.

Answers

Sun dis to Karin top of da TV ya dem ta gm ta if ya hol ta Ight r hol KB I’m ta

Where do nebulae come from, in the opinion of science?
*
1 point
It was made from a giant rabbit's skin.
It formed from the same cloud of dust that our entire galaxy is made from
It formed from hydrogen, the first element created in the universe.
It formed debris that was left over after a nova or supernova

Answers

Answer:

It formed from the same cloud of dust that our entire galaxy is made from

Other Questions
Which of the following is NOT an element of art?A. lineB. patternC. colorD. form the hcf of 12x^2-4xy+15x-5y Use the digits 1-9 without repeating, to create two prisms with the same volume Simplify the expression.3.2a + 3.5b 2.1a help me pls I need to get my grade up before July 11th so help ASAP ADE Company purchased equipment on January 1, Year 1 for $325,000. The equipment is estimated to have a 4-year useful life and a $75,000 salvage value. How much depreciation expense should Joseph recognize in Year 1 related to the use of the equipment Which statement is true about the polynomial5s6t2 + 6st9 8s6t2 6t7 after it has been fully simplified?It has 3 terms and a degree of 9.It has 3 terms and a degree of 10.It has 4 terms and a degree of 9.It has 4 terms and a degree of 10. Tell about a teacher who helpedyou in the past. The atmospheric pressure at the surface of titan is. Example:(Independent clause dependent clause)Jerry criticized him because he arrived late.(Dependent clause, independent clause)Because he arrived late, Jerry criticized him.Complete each complex sentence by using a conjunction to link the clauses. Find the 14 term of the following geometric sequence.10, 20, 40, 80, If the diameter of a youth baseball is 2. 8 inches and the diameter of an adult softball is 3. 8 inches, what is the approximate difference in their volumes? use 3. 14 for pi. round to the nearest tenth. recall the formula sphere volume = four-thirds pi r cubed. 1. 0 cubic inch 17. 2 cubic inches 40. 2 cubic inches 137. 8 cubic inches. Select the correct answer. Read the passage, and then answer the question. Civilization X was an ancient civilization. It was one of the most technologically advanced civilizations in the world. It perfected the use of iron. At first, iron was used mainly to make military weapons. This civilization used it to make strong, lightweight wheels for chariots. Civilization X used these chariots in battles. This combination of lightweight chariots and strong iron weapons helped them to conquer neighboring lands quickly and efficiently. Based on the passage, which of the following statements about civilization X is true? A. The civilization led unsuccessful military invasions and couldnt expand its empire. B. The civilization had a weak army despite having fast chariots and good-quality weapons. C. The civilization successfully conquered lands due to its technological advancements. D. The civilization made more chariots and weapons than neighboring civilizations. In a rapidly changing society, modern artists questioned _________ and __________. a. government; conventions b. politics; authority c. tradition; conventions d. tradition; politics please select the best answer from the choices provided a b c d Mr. Rodrigo pours himself a glass of orange juice every morning. Yesterday he drank 5/6 of his glass. Today he drank 7/12 of his glass. On which day did drink more Under President Johnsons plan for Reconstruction, how could states be readmitted to the Union?Twenty percent of a states white males had to swear loyalty.States had to disenfranchise all former Confederate soldiers.State conventions had to establish new governments.States had to ratify all three Reconstruction amendments.Help Please 25 points Select the correct answer for the blank: if everything else stays the same, the required sample size ____ as the confidence level decreases to reach the same margin of error. answer: question 1 options: increases decreases remains the same Karl Marx called religion the "opiate of the masses. This statement reflects his belief that religion was: useful in a productive society. numbing and used to mask problems. sacred and should be protected by the government. evil and should be illegal. Question 2 suppose there is a city where the mean cost per month of a one-bedroom apartment is $1,500, with a standard deviation of $250. approximately what percentage of one-bedroom apartments in the city cost between $750 and $1,000? Why won't anyone help me :(