Answer:
There must be a lot of dark matter that can be felt but not seen
The astronomers interpreted the unexpectedly fast rotation of galaxies that there must be a large quantity of dark energy whose gravity is detectable yet invisible.
What is a galaxy?Any system of stars plus interstellar material that makes up the cosmos is referred to as a galaxy. Such assemblages are common, and many of them are so massive that they hold tens of trillions of stars.
A vast variety of galaxies, from dim, hazy dwarf objects to spectacular spiral-shaped giants, have been created by nature. Almost all galaxies seem to have formed shortly after the universe started, and they are everywhere in space, even at the farthest limits of the universe that can be seen by the most advanced telescopes.
The majority of galaxies are found in clusters, many of which are further organized into clusters that span hundreds of billions of light-years.
Since there are almost empty spaces between these so-called super clusters, the universe's overall structure resembles a network of sheets or chains of galaxies.
To know more about Galaxy:
https://brainly.com/question/2905713
#SPJ12
What is the acceleration as an object goes from +20 m/s to +26 m/s over 1.4 s?
Answer:
4.3 m/s^2
Explanation:
a = vf - vi / t
26 - 20 / 1.4
= 4.28 ( round your numbers)
I couldn't answer this question may someone please help me
Distance (s) =20 m
Initial velocity =0 m/s
g=10 m/s²
By using the formula:
v²= u²+ 2as
v²=0²+ 2×10×15
v²= 300
V= 10root over 3
[tex]10 \sqrt{3} [/tex]
For calculating time,
v= u+ at
10 root over 3 = 0+ 10t
10 root over= 10t
t = 1 root over 3
t = 1.73 s
[tex]1 \sqrt{3} [/tex]
The the stone will hit the ground with a velocity of 10 root over 3 m/s in 1 root over 3 sec.
if you were planning to escape from someone and you were tied to a chair what would you do
5. An acrobat, starting from rest, swings freely on a trapeze of
length 3.7 m (Figure 6). If the initial angle of the trapeze is
48°, use the law of conservation of energy to determine
(a) the acrobat's speed at the bottom of the swing
(b) the maximum height, relative to the initial position, to
which the acrobat can rise
The energy conservation and trigonometry we can find the results for the questions about the movement of the acrobat are;
a) The maximum speed is v = 4.89 m / s
b) The maximum height is h = 1.22 m
The energy conservation is one of the most fundamental principles of physics, stable that if there are no friction forces the mechanistic energy remains constant. Mechanical energy is the sum of the kinetic energy plus the potential energies.
Em = K + U
Let's write the energy in two points.
Starting point. Highest part of the oscillation
Em₀ = U = m g h
Final point. Lower part of the movement
[tex]Em_f[/tex] = K = ½ m v²
Energy is conserved.
Emo = [tex]Em_f[/tex]
m g h = ½ m v²
v² = 2 gh
Let's use trigonometry to find the height, see attached.
h = L - L cos θ
h = L (1- cos θ)
They indicate that the initial angle is tea = 48º and the length is L = 3.7 m, let's calculate.
h = 3.7 (1- cos 48)
h = 1.22 m
this is the maximum height of the movement.
Let's calculate the velocity.
[tex]v= \sqrt{2 \ 9.8 \ 1.22}[/tex]
v = 4.89 m / s
In conclusion using the conservation of energy and trigonometry we can find the results for the questions about the movement of the acrobat are;
a) The maximum speed is v = 4.89 m / s
b) The maximum height is h = 1.22 m
Learn more here: brainly.com/question/13010190
a 1200-kg pick-up truck traveling south at 15 m/s suddenly collides with a 750-kg car that is traveling east. the two vehicles stick together and slide along the road after colliding. a highway patrol officer investigating the accident determines that the final position of the wreckage after the collision is 25 m, at an angle of 50° south of east, from the point of impact. she also determines that the coefficient of kinetic friction between the tires and the road at that location was 0.40. what was the speed of the car just before the collision?
The conservation of momentum, Newton's second law and kinematics allows to find the result for the initial speed of the car is:
The speed of the car is 40 m/s at the East direction.
Given parameters
Mass of the truck M = 1200 kg. Truck speed v₀₁ = 15 m / s towards the South. Mass of the car m = 750 kg. Travel east The two vehicles unite. The braking distance d = 25m at 50º SE The friction coefficient μ = 0.40To find
The initial speed of the car.
The momentum is defined by the product of the mass and the velocity of the body, so it is a vector quantity. In the case of an isolated system the momentum is conserved.
In the attachment we see a diagram of the vehicle crash, let's write the moment for each axis.
y-axis
Initial instant. Before the shock.
[tex]p_{oy}[/tex] = M v₀₁
Final moment. After the crash
[tex]p_{fy}[/tex] = (M + m) [tex]v_{fy}[/tex]
The system is formed by the two vehicles for which during the crash it is isolated and the momentum is conserved.
[tex]p_{oy} = p_{fy} \\\\M v_{o1} = (M+m) v_{fy} \\v_{fy} = \frac{M}{M+m} \ v_{o1}[/tex]
Calculate us
[tex]v_{fy} = \frac{1200}{1200+750} \ 15[/tex]
vfx = 9.23 m / s
x-axis
Initial instant. Before the crash.
p₀ₓ = m v₀₂
Final moment. After the crash.
[tex]p_{fx}[/tex] = (M + m) [tex]v_{fx}[/tex]
The momentum is preserved.
[tex]p_{ox}= p_{fx} \\m v_{o2) = (M+m) \ v_{fx}[/tex]
Let's find the velocity just after the collision, let's use Newton's second law,
y-axis
N-W = 0
N = W = (M + m) g
x-axis
fr = (M + m) a
The friction force is the macroscopic manifestation of the interactions between the two bodies.
fr = μ N
We substitute.
μ g = a
Now we can use kinematics.
v² = v₀² - 2a d
When the vehicles stop their speed is zero.
v₀² = 2 a x
v₀ = [tex]\sqrt{2\ \mu \ g \ d}[/tex]
Let's calculate.
v₀ = [tex]\sqrt{2 \ 0.40 \ 9.8 25 }[/tex]
v₀ = 14 m / s
This is the speed of the two vehicles just after the collision, that is, let's use trigonometry to find their components.
cos 25 = [tex]\frac{v_{ox}}{v_o}[/tex]
v₀ₓ = v₀ cos 25
v₀ₓ = 14 cos 25
v₀ₓ = 12.69 m / s
We substitute in the expression of the conservation of the momentum in the x-axis.
m v₀₂ = (M + m) [tex]v_{fx}[/tex]
[tex]v_{o2} = \frac{M+m}{m} v_{fx}[/tex]
Let's calculate.
[tex]v_{o2} = \frac{1200+750}{750} \ 12.69[/tex]
vfy = 32.99 m / s = 40 m / s
In conclusion using the conservation of momentum, Newton's second law and kinematics we can find the result for the initial speed of the car is:
The speed of the car is 40 m/s at the East direction.
Learn more here: brainly.com/question/18066930
A car starts from rest and accelerates at 2.5m/s^2 for 2s. What is the final velocity of the car
Answer:
5m/s ez
Explanation:
plz make me brainliest
Which do you think is easiest and hardest to keep track of: hazardous waste that is present as a gas, liquid, or solid? Why?
Answer:
probably liquid cause it can be contained easily
What decides free energy.
Answer: when free energy is extensive property that means its magnitude depends on the amount of a substance.
Explanation:
srry if im wrong :( .
Answer:
state of the system
Explanation:
A sports car accelerates from 0 to 60mph ,27 m/s ,in 6.3 secounds .The car exerts a force of 4106N . What is the mass of the car
The car accelerates 60 mph in 6.3 seconds. Thus, the acceleration is [tex]\frac{60}{6.3}[/tex]. [tex]f=ma[/tex], so [tex]4106 = m(\frac{60}{6.3})[/tex], so [tex]m=431.13[/tex].
does the force change if the density change in a object
Answer:
No
Explanation:
It doesn't depend on the density
Answer:No. If you take all your masses and and squeeze them into a tiny volume,
Help help fast please first answer gets brainiest also needs to be clearly stated
A cyclist accelerates from 0m/s to 8m/s in 3 seconds.
Answer:
the rate of acceleration is 2.6666(and so on) if thats your question
Explanation:
what is the meaning of physics
Answer:
the branch of science concerned with the nature and properties of matter and energy. The subject matter of physics, distinguished from that of chemistry and biology, includes mechanics, heat, light and other radiation, sound, electricity, magnetism, and the structure of atoms.
Explanation:
Jade has a refractive index of 1.61. If light approaches the gem at an angle of 80.0°, what is the angle of refraction?
Calculate the index of refraction of a material if the angle of incidence is 60° and the angle of refraction is 50°
Answer using calculations & full work and thoughts shown.
From Snell's law, the angle of refraction is 38 degree approximately and the index of refraction is 1.13
The given refractive index is 1.61
If light approaches the gem at an angle of 80.0°, that means the angle of incidence is 80.0°
To calculate the angle of refraction, we will use Snell's law which state that:
n = sin i / sin r
where n = refractive index
Substitute all the parameters into the formula
1.61 = sin 80 / sin r
make sin r the subject of formula
sin r = sin 80 / 1.61
sin r = 0.611
r = [tex]Sin^{-1}[/tex](0.611)
r = 37.7
r = 38 degree (Approximately)
We will use the same formula to calculate the index of refraction of a material if the angle of incidence is 60° and the angle of refraction is 50°. That is,
n = sin i / sin R
Where n = index of refraction
i = Incidence
R = refraction
Substitute all the parameters to the formula
n = sin 60 / sin 50
n = 0.866 / 0.766
n = 1.13
Learn more here: https://brainly.com/question/24321580
What does gravity, electricity, and magnesium have in common?
Answer:
magnesium (Mg), chemical element, one of the alkaline-earth metals of Group 2 (IIa) of the periodic table, and the lightest structural metal. Its compounds are widely used in construction and medicine, and magnesium is one of the elements essential to all cellular life.
Explanation:
hope it helps
when a viscous fluid flows in a tube, its velocity is __________.
what happens to light in an object that is translucent?
Translucent objects allow some light to travel through them. The light does not pass directly through the materials. It changes direction many times and is scattered as it passes through. Therefore, we cannot see clearly through them and objects on the other side of a translucent object appear fuzzy and unclear.
Calculate the weight of an object that displaces 3 m2 of water and exerts a pressure of 500 Pa (500 N/m ).
The weight of the object from the information provided in the question is 1500 N.
We know that pressure = Force/area. We have the following information from the question;
Pressure =500 Nm-2
Area = 3 m2
Hence;
Force = Pressure × area
Force = 500 Nm-2 × 3 m2
Force = 1500 N
Hence, the weight of the object is 1500 N
Learn more: https://brainly.com/question/8646601
Leverrier predicted that an invisible planet was pulling the planet Uranus off its predicted course around the sun. Likewise, human beings are pulled off course by the invisible forces of their ____________.
Human beings are pulled off course as a result of the invisible forces of the unconscious.
According to Leverrier, he stated that an invisible planet was pulling the planet Uranus off its predicted course around the sun.
In such a way, human beings are pulled off course by the invisible forces of their unconscious minds. The unconscious minds of people control the thoughts of people.
Read related link on:
https://brainly.com/question/25588203
If the circumference of a space shuttle's orbit around Earth is 42,522 km and the space shuttle orbits around it 1.4 times
every hour, what is the speed of the space shuttle in km/hour? In meters/second?
Answer:
105,000km or about 65,244mi
Explanation:
If the space shuttle orbits around it 1.4 times every hour then the speed of the space shuttle in km/hour would be 595330.8 Km/hour, and its speed in meters would be 165369.67 m/s.
What is speed?The total distance covered by any object per unit of time is known as speed. It depends only on the magnitude of the moving object.
Average speed = total distance /Total time
As given in the problem If the circumference of a space shuttle's orbit around Earth is 42,522 km and the space shuttle orbits around it 1.4 times every hour, then we have to find the speed of the space shuttle in km/hour
The total distance covered by the space shuttle in an hour = 42,522×1.4
= 595330.8 Km
The speed of the space shuttle in meters/second = 595330.8 × 1000/3600
= 165369.67 m/s
Thus, the speed of the space shuttle would be 595330.8 Km/hour, and its speed in meters would be 165369.67 m/s.
To learn more about speed here, refer to the link;
brainly.com/question/7359669
#SPJ5
How to find the energy in a compressed spring.
Suppose you were able to take measurements of current through the
resistor and voltage across the resistor. Your record of numerical values is written in a
tabular data below
Answer:
see attached
Explanation:
It will be easier to plot the data if you have grid lines to work with.
In the attached, we had to reverse the order of entries in the table, because the graphing program likes the independent variable listed first.
PLEASE ANSWER NEED HELP!!!!!!!! PLEASE THE CORRECT ANSWER!!!!!!
Jose’s doctor recommends that he add more cardio to his exercise routine. Which exercise would be the BEST choice?
A.
ballet
B.
jogging
C.
bowling
D.
volleyball
PLEASE NO LINKS OR I WILL REPORT YOU
Answer:
jogging
Explanation:
Jogging is often defined as running at a pace less than 6 miles per hour (mph), and it has some significant benefits for people who want to improve their health without overdoing it.
A bob attached to a string of length L = 1.25 m, initially found at the equilibrium
position, is given an initial velocity v = 0.8 m/s. The maximum displacement angle,
Omax, is: (Take g=10 m/s)
17
3.2
13
10.2
6.4
Clear selection
A hoh attached to a string of length 2 m is displaced by an angle of 8º and then
The maximum displacement angle of the bob is 13⁰.
The given parameters;
Length of the pendulum, L = 1.25 mInitial velocity of the bob, v = 0.8 m/sThe maximum displacement of the bob is calculated by applying the principle of conservation of energy;
[tex]P.E = K.E\\\\mgh = \frac{1}{2} mv^2\\\\h = \frac{v^2}{2g} \\\\h = \frac{0.8^2}{2\times 10} \\\\h = 0.032 \ m[/tex]
The maximum displacement angle is calculated as follows;
[tex]cos \theta = \frac{L-h}{L} \\\\cos \theta = \frac{1.25 - 0.032}{1.25} \\\\\cos \theta = \frac{1.218}{1.25} \\\\cos \theta = 0.9744\\\\\theta = cos^{-1}(0.9744)\\\\\theta = 13\ ^0[/tex]
Thus, the maximum displacement angle of the bob is 13⁰.
Learn more here:https://brainly.com/question/13981780
PLEASE ANSWER THIS RIGHT ASAP
What is the correct definition of energy?
A: chemical changes
B: force × distance
C: both kinetic and potential energy
D: the ability to do work or cause change
Answer:
D: The ability to do work or cause change.
Explanation:
Energy can be defined as the ability to do work. We apply energy in basically everything we do in life, energy is needed to walk or move from one position to another, it is required to eat and do other basic things of life. The body system converts the food that is being consumed into energy, this energy can be switched from one form to another.
There are various forms of energy which include solar energy, wind energy, electrical energy, mechanical energy, kinetic energy, potential energy, etc. This form of energy can be converted from one form to another but cannot be destroyed.
Hope this helps :)
The c-c sigma bond in acetylene is formed by the overlap of which two orbitals.
Answer:When carbon atom tends to form single bonds then its hybridization is , when carbon atom tends to form double bond then its hybridization is and when a carbon atom is attached to a triple bond or with two double bonds then its hydridization is sp.
For example, in HCN molecule there is a triple existing between the carbon and nitrogen atom.
So, hybridization of carbon in this molecules is sp. Moreover, nitrogen atom is also attached via triple bond and it also has a lone pair of electrons. Hence, the hybridization of nitrogen atom is also sp.
Thus, we can conclude that s and p type of orbitals overlap to form the sigma bond between C and N in H−C≡N:
Explanation:
What is a net force on an object that has a mass of 20.0 kg, an applied force of 100 n moving on a surface with a friction coefficient of 0.21?
The net force on the object as described is; 58.84N
Two forces acting on the object are;
The applied force and the frictional force.In essence; the frictional force can be evaluated as;
Frictional force; = coefficient × Weight of object.Frictional force = 0.21 × 20 × 9.8.Frictional force = 41.16NThe Net force = Applied force - frictional forceNet force = 100 - 41.16NNet Force = 58.84 N.
Read more:
https://brainly.com/question/94428
which term is most applicable to a discussion of angular momentum in the context of black holes?
A: Photon
B: Curvature
C: Spin
D: Time
Answer:
c: spin
Explanation:
it's not curvature
The most applicable term to a discussion of angular momentum in the context of black holes is Spin. Thus, the correct option is C.
What is angular momentum of black holes?
Angular Momentum is defined as the property of any rotating object which is given by the product of the moment of inertia of an object and the angular velocity of the rotating object. Angular momentum is a vector quantity and it has both the magnitude and direction. The examples of angular momentum are the rotation and revolution of the Earth.
When the astronomers claim that they have estimated the spin of a black hole, this means they have measured its angular momentum. This is the total angular momentum of all the materials on the Universe that ever crossed the event horizon and got trapped inside it.
Therefore, the correct option is C.
Learn more about Angular momentum here:
https://brainly.com/question/29563080
#SPJ2
What is the disappearance of a wave into a medium.
A. Signal
B. Amplitude
C. Absorption
D. Transmission
Answer:
Absorption
Explanation:
the disappearance of an EM wave into the medium. scattering – the spreading out of light rays in all directions because particles reflect and absorb the light.
How far can a mother push a 20.0 kg baby carriage, using a force of 62 N, if she can only do 2920 J of work?
Please find attached photograph for your answer.
Hope it helps.
One thing I have to mention is that here we do not need to calculate the mass because the amount of force is already given.
Please do comment if you have any query.