Complete question:
How many x-ray photons per second are created by an x-ray tube that produces a flux of x rays having a power of 1.00 W. Assume the average energy per photon in 78.0 keV.
Answer:
The number of x-ray photons per second created by the x-ray tube is 8.01 x 10¹³ photons/sec
Explanation:
Given;
power of the flux produced, P = 1 W = 1 J/s
energy per photon, E = 78 keV
Convert the energy per photon to J
E = 78 x 10³ x 1.6 x 10⁻¹⁹ = 1.248 x 10⁻¹⁴ J / photon
let the number of photons = n
n(1.248 x 10⁻¹⁴ J / photon) = 1 J/s
[tex]n = \frac{1 \ J/s}{1.248 \times 10^{-14}\ J/photon } = 8.01 \times 10^{13} \ photons/s[/tex]
Therefore, the number of x-ray photons per second created by the x-ray tube is 8.01 x 10¹³ photons/sec
Identical net forces act for the same length of time on two different spherical masses. Which of the following describes the change in linear momentum of the smaller mass compared to that of the larger mass?
a. it is smaller than the change in linear momentum of the larger mass but not zero.
b. It is larger than the change in linear momentum of the larger mass.
c. It is equal to the change in linear momentum of the larger mass.
d. It is zero
Answer:
the correct answer is c
Explanation:
In this exercise we seek the momentum
I = F t
this value is set because forces and time are given.
Now we can use the relationship between linear momentum and momentum
I = p_f - p₀
I = m v_f - m v₀
suppose that the two spheres depart with the same initial velocity
Let's analyze these results, the value of the impulse is the same, so the body of lower mass must acquire greater speed or momentum
consequently the lighter sphere acquires more final speed, but the change of momentum is the same in the two spheres
Consequently the correct answer is c
1.A motor is rated at 1.5 hp. At what speed in m/s can this motor raise a
200 kg load?
2. A bucket of water with a total weight of 50 Newtons is lifted at constant
velocity up a 10 meter deep well. If it takes 20 seconds to raise the bucket
this distance, what is the power required to lift the bucket?
Answer:
1. 0.57 m/s
2. 25 Watts
Explanation:
1. Determination of the speed.
We'll begin by converting 1.5 hp to watt (W). This can be obtained as follow:
1 hp = 745.7 W
Therefore,
1.5 hp = 1.5 hp × 745.7 W / 1 hp
1.5 hp = 1118.55 W
Next, we shall determine the force. This can be obtained as follow:
Mass (m) = 200 Kg
Acceleration due to gravity (g) = 9.8 m/s²
Force (F) =?
F = m × g
F = 200 × 9.8
F = 1960 N
Finally, we shall determine the speed. This can be obtained as follow:
Power (P) = 1118.55 W
Force (F) = 1960 N
Speed (v) =?
P = F × v
1118.55 = 1960 × v
Divide both side by 1960
v = 1118.55 / 1960
v = 0.57 m/s
Thus, the speed is 0.57 m/s
2. Determination of the power.
We'll begin by calculating the velocity. This can be obtained as follow:
Displacement = 10 m up
Time = 20 s
Velocity =?
Velocity = Displacement / time
Velocity = 10 / 20
Velocity = 0.5 m/s
Finally, we shall determine the power. This can be obtained as follow:
Velocity (v) = 0.5 m/s
Force (F) = 50 N
Power (P) =?
P = F × v
P = 50 × 0.5
P = 25 Watts
Therefore, the power required to lift the bucket is 25 Watts
100 POINTS AND BRAINLIEST!!! How does the egg sucked into a glass bottle trick work?
Answer: The egg will get sucked into the bottle. To get the egg out of the bottle, turn the bottle upside down and blow into it, so that the egg acts as a one-way valve. The increased air pressure in the bottle will cause the egg to pop back out.
Explanation:
Quickly place the egg over the mouth of the bottle. The egg will get sucked into the bottle. To get the egg out of the bottle, turn the bottle upside down and blow into it, so that the egg acts as a one-way valve. The increased air pressure in the bottle will cause the egg to pop back out.
Name the state of matter in which
(a) Rate of diffusion is fastest (b) diffusion does not take place.
plss essay
Answer:
A
Explanation:
3. Sally (45 kg) and Stan (90 kg) and arrive at Michigan Adventure and climb the stairs to ride the big
Shivering Timber coaster that is nearly 40 m tall and reaches speeds of 65 mi/hr.
a) Compare the potential energies of Sally and Stan as they wait in line at the top of the stairs.
Explain your reasoning.
Give 2 reasons for fitting heavy commercial vehicles with many tyres
As we know larger the area of contact lesser the pressure. So, in order to reduce the pressure heavy vehicles have broad tyres to increase the area of contact with the ground. Heavy vehicles have broad tyres because broad tyres have large area of contact and less pressure on the ground.
mark me brainliesttt pls :)))
With explanation pls
Answer:
[tex](x \times 1) = (400 \times 2.5) \\ x = 1000 \: newtons[/tex]
[tex]y = 0[/tex]
Calculate the spring constant of the spring in a child's pogo stick if the child has a mass of 32 kg and bounces once every 2.7 seconds
Answer:
The spring constant is 173.12 N/m.
Explanation:
mass, m = 32 kg
Period, T = 2.7 s
let the spring constant is K.
Use the formula of period,
[tex]T = 2\pi\times \sqrt \frac{m}{K}\\\\2.7 =2\times 3.14\sqrt\frac{32}{K}\\\\K = 173.12 N/m[/tex]
A 6 kg ball experiences a 5 m/s^2 acceleration. What is the strength of the force felt by the ball?
a: 0.83kg
b: 30 newtons
c: 30 kg
d: 1.2 newtons
Answer:
30 newtons
explanations
data given
mass=6kg
acceleration=5
f=m×a
6×5=30
The volume of an ideal gas changes from 0.40 to 0.55 m3 although its pressure remains constant at 50,000 Pa. What work is done on the system by its environment
Answer:
w= p∆v 50000 ( 0.55-0.40) and calculate and you get it
The work done on the system by its environment is 7,500J.
To find the work done, we need to know about the work done on an ideal gas during isobaric process.
What is isobaric process?When the pressure is remained constant throughout a process, then the process is called isobaric process.
What is the work done on a system in the isobaric process?For a isobaric process, the work done is pressure × (final volume of the system - initial volume)Here, Final volume= 0.55 m³
Initial volume= 0.40 m³
Pressure= 50,000 Pa
Work done = 50,000 × (0.55 - 0.40)
= 7,500 J
Thus, we can conclude that 7,500 J of work is done on the system by its environment.
Learn more about worn done on a system here:
https://brainly.com/question/23902763
#SPJ2
You throw a glob of putty straight up toward the ceiling, which is 3.50 mm above the point where the putty leaves your hand. The initial speed of the putty as it leaves your hand is 9.50 m/sm/s. Part A What is the speed of the putty just before it strikes the ceiling
Answer: [tex]4.65\ m/s[/tex]
Explanation:
Given
Distance putty has to travel is 3.5 m
The initial speed of putty is 9.50 m/s
Using equation of motion to determine the velocity of putty just before it hits ceiling
[tex]v^2-u^2=2as[/tex]
[tex]\Rightarrow v^2-(9.5)^2=2(-9.8)(3.5)\\\\\Rightarrow v^2=9.5^2-68.6\\\Rightarrow v=\sqrt{90.25-68.6}\\\Rightarrow v=4.65\ m/s[/tex]
So, the velocity of putty just before hitting is [tex]4.65\ m/s[/tex]
Two physics students are arguing about superconductors and their discovery, Jeffe says that he can use a
thermometer and a plug that generates electric current to mimic the experiment and make a superconductor since the
thermometer contains mercury. Sigorne says that he is wrong. Who should win the argument?
O Sigorne, because Jeffe can't use mercury to create a superconductor
O Sigorne, because Jeffe would have to cool the mercury as well
O Jeffe, because he has all of the materials to make a superconductor
O Jeffe, because superconductors are simple to make as long as there is a metal and a current
Answer:
B on edge2020-2021
Explanation:
Some students are making a domino cascade for a fair project and want to use a ball rollingup and then down an incline in one part of it. The timing has to be very precise so theyneed to know exactly how long it will take the ball to go up and down. They have measuredthe acceleration of the ball on the incline to be 2.5 m/s2. If the ball starts part way up theramp, rolls up for 1.1 m, then down 0.7 m past its starting point, how long will it take
Answer:
total time taken is 2.1389 seconds
Explanation:
Given the data in the question and as illustrated in the diagram below;
They have measured the acceleration of the ball on the incline to be 2.5 m/s²
a = -2.5 m/s² { negative because its acting downward }
from the diagram, Motion from B to C will be;
v² = u² + 2as
given that distance s = 1.1 m
we substitute
v² - u² = 2as
(0)² - u² = 2 × (-2.5 m/s ) × 1.1 m
-u² = -5.5
u = √5.5
so Initial speed; u = 2.345 m/s
to get the time, we use the equation of motion;
v = u + at
we substitute
0 = 2.345 m/s + ( -2.5 m/s² × t₁ )
2.5t₁ = 2.345
t₁ = 2.345 / 2.5
t₁ = 0.938 s
Now, from C to B
we determine t₂
s = vt₂ + [tex]\frac{1}{2}[/tex]at₂²
1.1 m = 0×t₂ + [tex]\frac{1}{2}[/tex] × 2.5 m/s² × t₂²
1.1 m = [tex]\frac{1}{2}[/tex] × 2.5 m/s² × t₂²
1.1 m = 1.25 m/s² × t₂²
t₂² = 1.1 m / 1.25 m/s²
t₂² = 0.88 s²
t₂ = √0.88 s²
t₂ = 0.938 s
Next, from B to A; t₃ will be;
s = ut₃ + [tex]\frac{1}{2}[/tex]at₃²
we substitute
0.7 m = (2.345 m/s)t₃ + [tex]\frac{1}{2}[/tex] × 2.5 m/s × t₃²
0.7 m = (2.345 m/s)t₃ + ( 1.25 m/s )t₃²
1.25t₃² + 2.345t₃ - 0.7 = 0
using; x = [ -b ± √( b² - 4ac ) ] / 2a
we substitute
x = = [ -2.345 ± √( (2.345)² - (4 × 1.25 × -0.7) ) ] / 2(1.25)
x = [ -2.345 ± √( 5.499 + 3.5 ) ] / 2.5
x = [ -2.345 ± √( 8.999 ) ] / 2.5
x = [ -2.345 ± 2.9998 ] / 2.5
x = ( [ -2.345 - 2.9998 ] / 2.5 ) or ( [ -2.345 + 2.9998 ] / 2.5 )
x = -2.1379 or 0.2629
hence t₃ = 0.2629 s
∴ Total time = t₁ + t₂ + t₃
Total time = 0.938 s + 0.938 s + 0.2629 s
Total time = 2.1389 seconds
Therefore, total time taken is 2.1389 seconds
5. Charges added to a conductor quickly spread over the surface of the object.
a. True
b. False
Answer:
a. True
Explanation:
Conduction involves the transfer of electric charge or thermal energy due to the movement of particles. When the conduction relates to electric charge, it is known as electrical conduction while when it relates to thermal energy, it is known as heat conduction.
A conductor can be defined as any material or physical object that allows the conduction (transfer) of electric charge or thermal energy. Some examples of conductors are metal, steel, aluminum, copper, frying pan, pot, metallic spoon, etc.
During heat conduction, thermal energy is usually transferred from fast moving particles to slow moving particles during the collision of these particles.
Furthermore, any charge that is added to a conductor would quickly spread over the surface of the conducting object due to the fact that it allows the movement of subatomic particles.
Answer: True
Explanation: Aced Test
What is the first quantum number of a 252 electron in phosphorus,
1322s22p3s23p3?
A. n=0
B. n= 3
O
C. n = 1
O D. n = 2
Answer:
the correct answer is B
Explanation:
The quantum numbers are the constants obtained when solving the Schrodinger equation, the first quantum number or principal quantum number (n), can take values from zero to infinity.
This quantum number is placed as a coefficient in the quantum distribution.
In this case for phosphorus, the number is n = 3
the correct answer is B
The brake shoes of your car are made of a material that can tolerate very high temperatures without being damaged. Why is this so
they have rubber and meatal so its going to get hot of course cause it a engine pushing and the gasoline is just all coming together but damage wise I still it the protection on that part to keep it from damage and life risk
I hope this may help
A standing wave with 5 loops is created on a string that is 0.75 m long. If the
wave has a velocity of 300 m/s, what is the frequency of the wave?
1000 Hz
400 Hz
225 Hz
90 Hz
None of the above
wave velocity = frequency × wavelength
300 = frequency × 0.75
Frequency = 300÷0.75 = 400 HZ
g You decide to play fetch with your dog, who is sitting nextto you, so you throw a ball down a narrow hallway. The ballcomes to a stop 3.9 m down the hallway. The dog, startingfrom rest, runs after the ball with a constant acceleration of0.70m/s2until she reaches the ball. She grabs the ball whilestill running down the hallway uniformly accelerating(slowingdown) for 4.7 more seconds until she comes to a stop. What isthe total distance the dog travels to grab the ball and come toa final stop, starting from rest
You decide to play fetch with your dog, who is sitting nextto you, so you throw a ball down a narrow hallway. The ballcomes to a stop 3.9 m down the hallway. The dog, startingfrom rest, runs after the ball with a constant acceleration of0.70m/s2until she reaches the ball. She grabs the ball whilestill running down the hallway uniformly accelerating(slowingdown) for 4.7 more seconds until she comes to a stop. What isthe total distance the dog travels to grab the ball and come toa final stop, starting from rest
Jesse drives 120km to a farm. His trip takes 2 1/2 hoursWhat is his speed?
Speed = distance / time
Speed = 120 km / 2 1/2 hours
Speed = 48 km per hour
Two cars travel in the same direction along a straight highway, one at a constant speed of 55 mi/h and the other at 60 mi/h.How far must the faster car travel before it has a 15-min lead on the slower car
Answer:
The distance traveled by the faster car when it is 15 mins ahead of the slower car is 165 miles.
Explanation:
Given;
speed of the faster car, v₁ = 60 mi/h
speed of the slower car, v₂ = 55 mi/h
Let the distance traveled by the faster car when it is 15 mins ahead of the slower car = x miles
[tex]\frac{x}{55} - \frac{x}{60} = \frac{15}{60}[/tex]
Note: divide 15 mins by 60 to convert to hours for consistency in the units.
[tex]\frac{x}{55} - \frac{x}{60} = \frac{15}{60}\\\\multiple \ through \ by \ 660\\\\12x - 11x = 165\\\\x = 165 \ miles[/tex]
Therefore, the distance traveled by the faster car when it is 15 mins ahead of the slower car is 165 miles.
True or false, wrrect the false
statement:
• The magnetic field created by a flat coil is
uniform.
• Inside a solenoid, the lines of field are
oriented from the north face to the south
face.
• The magnetic field outside Helmholtz
coils is uniform.
• Le champ B à l'intérieur d'un solénoïde
est uniforme.
• The magnitude of B, created by a flat coil
of radius R, at any point in its plane is
B= 2m x 10-NI
R
• The designation of the faces of a wil
depend the sense of the current
traversing it.
Answer:
false
Explanation:
Determine the amount of work done on an ideal gas as it is heated in an enclosed thermally insulated cylinder topped with a freely moving piston. The cylinder contains of n moles of the gas and the temperature is raised from T1 to T2. The piston has a mass m and a cross sectional area A.
Answer:
W = 3/2 n (T₁- T₂)
Explanation:
Let's use the first law of thermodynamics
ΔE = Q + W
in this case the cylinder is insulated, so there is no heat transfer
ΔE = W
internal energy can be related to the change in temperature
ΔE = 3/2 n K ΔT
we substitute
3/2 n (T₂-T₁) = W
as the work is on the gas it is negative
W = 3/2 n (T₁- T₂)
I need help with this assignment
[3 marks]
A particle of mass 100 g executes simple harmonic motion about x = 0 with angular frequency ω = 10 s-1. Its total mechanical energy is Etot = 0.45 J. Find the displacement of
the particle when its speed is 2 m/s. [3 marks]
Answer:
22.4 cm
Explanation:
The total mechanical energy of the particle Etot = K + U where K = kinetic energy = 1/2mv² where m = mass of particle = 100 g =0.1 kg and v = speed of particle = 2 m/s and U = potential energy = 1/2kx² where k = spring constant and x = displacement
Etot = K + U
U = Etot - K
U = Etot - 1/2mv²
Since Etot = 0.45 J, substituting the values of the other variables into the equation, we have
U = Etot - 1/2mv²
U = 0.45 J - 1/2 × 0.1 kg × (2 m/s)²
U = 0.45 J - 1/2 × 0.1 kg × 4 m²/s²
U = 0.45 J - 0.1 kg × 2 m²/s²
U = 0.45 J - 0.2 J
U = 0.25 J
Now U = 1/2kx² and the angular frequency ω = √(k/m) ⇒ ω²m = k
So, U = 1/2ω²mx²
x² = 2U/ω²m
x = (√2U/m)/ω
since ω = 10 rad/s, substituting the values of the variables into the equation, we have
x = (√2U/m)/ω
x = (√2 × 0.25 J/0.1 kg)/10 rad/s
x = (√0.5 J/0.1 kg)/10 rad/s
x = (√5 J/kg)/10 rad/s
x = 2.24/10 m
x = 0.224 m
x = 22.4 cm
while hunting in a cave a bat emits sounds wave of frequency 39 kilo hartz were moving towards a wall with a constant velocity of 8,32 meters per second take the speed of sound as 340 meters per second calculate frequency
Complete question:
while hunting in a cave a bat emits sounds wave of frequency 39 kilo hartz were moving towards a wall with a constant velocity of 8.32 meters per second take the speed of sound as 340 meters per second. calculate the frequency reflected off the wall to the bat?
Answer:
The frequency reflected by the stationary wall to the bat is 41 kHz
Explanation:
Given;
frequency emitted by the bat, f = 39 kHz
velocity of the bat, [tex]v_b[/tex] = 8.32 m/s
speed of sound in air, v = 340 m/s
Apply the doppler-effect principle to solve this problem.
The apparent frequency of sound striking the wall is calculated as;
[tex]f' = f(\frac{v}{v- v_b} )\\\\f' = 39,000(\frac{340}{340 -8.32} )\\\\f' = 39978.29 \ Hz[/tex]
The frequency reflected by the stationary wall to the bat is calculated as;
[tex]f_s = f'(\frac{v + v_b}{v} )\\\\f_s = 39978.29(\frac{340 + 8.32}{340} )\\\\f_s = 40,956.56 \ Hz[/tex]
[tex]f_s\approx 41 \ kHz[/tex]
PLS ANSWER FAST WILL GIVE BRAINLY!!!!!!!
explain at least one way that engineers and scientists work to prevent coastal erosion.
Answer:
the answer is the explaination
Explanation:
Present beach erosion prevention methods include sand dunes, vegetation, seawalls, sandbags, and sand fences. Based on the research conducted, it is evident that new ways to prevent erosion must be obtained. Each way that is currently used has extensive negative effects on beaches and their natural tendencies.
Answer:
They will construct strong sea walls with the intent to protect the coastline and infrastructure that could be affected by erosion.
Explanation:
what's the difference between mass and inertia in a tabular form
Answer:
to be honest i dont know
Explanation:
^^
state the two motion equations.
Answer:
Equations of motion relate the displacement of an object with its velocity, acceleration and time. s=vt where s is the displacement, v the (constant) speed and t the time over which the motion occurred. ...
Displacement with negative acceleration: s, equals, v, t, minus, one half, a, t, square...
Displacement with positive acceleration: s, equals, u, t, plus, one half, a, t, squared,s...
Velocity squared: v, squared, equals, u, squared, plus, 2, a, s,v2=u2+2as
Velocity: v, equals, u, plus, a, t,v=u+at
Each of the four expansion models (recollapsing, critical, coasting, and accelerating) predict different ages for the universe, given the current expansion rate. Why is this
Answer:
This is because the age of the universe is determined by the pace of expansion in the past, and each model forecasts a different pace.
Explanation:
The age of the universe is determined by the pace of expansion in the past, and each model forecasts a different pace.
This is due to the fact that the expansion rate in the coasting model is constant and never changes. Because the cosmos is growing faster now than during the old days, recollapsing and critical models give shorter ages. According to the accelerating model, the universe is growing at a slower rate currently than in the past, implying an older age.
Parallel rays from a distant object are traveling in air and then are incident on the concave end of a glass rod with a radius of curvature of 15.0 cm. The refractive index of the glass is 1.50. What is the distance between the vertex of the glass surface and the image formed by the refraction at the concave surface of the rod? Is the image in the air or in the glass?
Answer:
the distance of image from the vertex is 45 cm and the image formed is in the glass.
Explanation:
distance of object, u = - infinity
radius of curvature, R = - 15 cm
refractive index, n = 1.5
Let the distance of image is v.
Use the formula
[tex]-\frac{n1}{u}+\frac{n2}{v}=\frac{n2- n1}{R}\\\\-\frac{1}{\infty }+\frac{1.5}{v}=\frac{1.5-1}{-15}\\\\v=45 cm[/tex]
The image is in the glass.