Answer:
The answer is 200 cm³Explanation:
The volume of a substance when given the density and mass can be found by using the formula
[tex]volume = \frac{mass}{density}\\[/tex]
From the question
mass = 150 g
density = 0.75 g/cm³
We have
[tex]volume = \frac{150}{0.75} \\ [/tex]
We have the final answer as
200 cm³Hope this helps you
Is sulfur dioxide a element?
yes it is a element.
Identify and give an example of at least two molecular properties that could be used to separate a substance from a mixture.
Answer:
Two molecular properties that could be used to separate a substance from a mixture are - Filtration and Chromatography .
Explanation
Molecular property -Molecular properties include the chemical properties, physical properties, and structural properties of molecules, including medicines. Typically, molecular properties do not include a chemical compound's pharmacological or biological properties.
Filtration -: Using a filter medium that allows the fluid to move through but not the solid, filtration is a method used to distinguish solids from liquids or gases. The term 'filtration' refers whether the filter is mechanical, chemical, or physical. The filtrate is considered the fluid that flows through the filter. A surface filter, which is a solid that traps solid particles, or a depth filter, which is a bed of material that traps the solid, may be the filter medium.Usually, filtration is an imperfect operation. On the feed side of the filter or embedded in the filter media, some fluid remains and some tiny solid particles make their way through the filter.
example - Filters containing fibers that trap particulates are used by many aquariums.
Chromatography -: A laboratory method for the isolation of a mixture is chromatography. The mixture is dissolved in a fluid called the mobile phase (gas, solvent, water) that carries it through a device (a column, a capillary tube, a plate, or a sheet) on which a material called the stationary phase is fixed. For the stationary step, the different constituents of the mixture have different affinities.Chromatography can be analytical or preparatory. Preparative chromatography is intended to isolate the components of a mixture for subsequent use and is therefore a method of purification. Analytical chromatography is usually conducted with smaller quantities of material and is intended to assess the presence of analytes in a mixture or to measure their relative proportions. Both are not limited to each other.
An example of chromatography is when a chemical reaction is used to separate each of the various sized molecules on a piece of paper in a liquid compound into their own pieces.
Hence , the answer is filtration and chromatography .
In which cell will the molecules diffuse out A or B
A 10-kg ball is accelerated 500 m / s2 by a force of
Answer:
The answer is 5000 NExplanation:
The force acting on a body can be found by using the formula
force = mass × accelerationFrom the question
mass = 10 kg
acceleration = 500 m/s²
We have
force = 10 × 500
We have the final answer as
5000 NHope this helps you
I will give you brainliest
Answer:
Plumbing System
Explanation:
Answer:
C plumbing system
Explanation:
Infrastructure is the basic structures needed for the operation of society
Can anybody help me with this please
Answer:
30
Explanation:
its pushed into a 30 resistor
The unknown element (Johnsonium, Jo) contains three naturally occurring isotopes. The relative abundances and atomic mass are:
Moorium-36: abundance = 1.32%, mass = 35.978amu
Moorium-38: abundance = 3.25%, mass = 37.963amu
Moorium-40: abundance = 95.43%, mass = 39.962amu
What is the average atomic mass of "Moorium?"
Answer:
Average atomic mass of moorium is 39.844 amu.
Explanation:
Given data:
Atomic mass of moorium-36 = 35.978 amu
Relative abundance of moorium-36 = 1.32%
Atomic mass of moorium-38 = 37.963 amu
Relative abundance of moorium-38 = 3.25%
Atomic mass of moorium-40 = 39.962 amu
Relative abundance of moorium-38 = 95.43%
Solution:
Average atomic mass moorium = (abundance of 1st isotope × its atomic mass) +(abundance of 2nd isotope × its atomic mass)+ (abundance of 3rd isotope × its atomic mass) / 100
Average atomic mass of moorium = (1.32×35.978)+(3.25×37.963)+(95.43×39.962) /100
Average atomic mass of moorium = 47.491 + 123.380 +3813.574 / 100
Average atomic mass of moorium = 3984.445 / 100
Average atomic mass of moorium = 39.844 amu
what is percipatation
Answer:
Water that falls from the clouds.
Explanation:
Complete a write up about the elements in Ammonia and explain how the elements bounded to create the new substance.
Answer:
Explanation:
Ammonia consist of nitrogen and hydrogen.
Chemical equation:
N₂ + H₂ → NH₃
Balance chemical equation:
N₂ + 3H₂ → 2NH₃
We can see that nitrogen and hydrogen react with each other and from ammonia.
Nitrogen is present in group 5A. The atomic number of nitrogen is 7. Its atomic mass is 14 amu. It has 5 valence electron.
Electronic configuration:
N₇ = 1s² 2s² 2p³
we can see there are five electron in outer most shell. Thus, nitrogen needs three more electrons to complete the octet. When it combine with other atoms it gain three electron from them
While hydrogen is present in group 1A. It has one valence electron. In ammonia (NH₃) when nitrogen react with hydrogen it gain three electrons thus three atoms of hydrogen combine with one atom of ammonia because one hydrogen atom can share only one electron. Covalent bond is formed between nitrogen and hydrogen and new substance formed is called ammonia.
Plz help!
Which elements form covalent bonds? Which other element is included in the group?
Is hydrogen a metal or a nonmetal? How many valence electrons does a hydrogen atom have?
Answer:
hydrogen is a non-metal, and has one valence electron.
Explanation:
Hope this helps!!
Hydrogen shows properties of both metals and nonmetals. However, hydrogen is placed with the alkali metals since it contains one valence electrons.
What is hydrogen ?Hydrogen is the first element in the periodic table. It has only one electron and it is the valence electron of hydrogen. Therefore, hydrogen is placed in the first group of periodic table.
Hydrogen needs one more electrons to become stable. The 17th group elements halogens also have a valency of one. Hence, hydrogen shows some chemical similarities with halogens also.
Mostly hydrogen forms covalent bonds like non-metals and in rare cases, hydrogen forms ionic bonds by donating its electron. Therefore, hydrogen is mostly considered as a non-metal.
Find more on hydrogen;
https://brainly.com/question/11837837
#SPJ2
Express the measurement using the appropriate SI prefix. For example, 10.72 x 103m is the same as 10.72 km because the “k” stands for 103
8.09 x 10-6g
(I got super stuck on this)
Answer:
[tex]10.72 \times 10 {}^{3} m = 10.72km \\ 8.09 \times 10 {}^{ - 6} g = 8.09 \times 10 {}^{ - 9} kg \\ \\ note : \\ to \: convert \: to \: \: k(units) \: you \: divide \: the \: value \: by \: {10}^{3} . \\ 5m \: to \: km \: will \: be : \\ \frac{5}{1000} km = {5 \times 10}^{ - 3} km[/tex]
FIRST TO ANSWER CORRECTLY GETS BRAINLIEST!
Answer:
Quito is the one..
2. Explain how energy originates and is emitted from a star.
Answer:
Stars generate energy through nuclear fusion. Here's an easy explanation about how the process works. ... Stars spend most of their lives repetitively compressing two hydrogen atoms into a single helium atom – plus a lot of energy, which is released as light and heat.
A student redid the experiment of mixing room-temperature water and warm
water. This time, she doubled the amount of room temp water. How will the final
temperature be different?
A- It will be higher, because the amount of water in the mixture is greater.
B-It will be lower, because the temperature of the room-temperature water will not increase as much.
C-It will be the same because all parts of the mixture will end up at the same temperature.
D-It will be higher, because all parts of the mixture will end up at the same temperature.
Answer:
B) It will be lower, because the temperature of the room-temperature water will not increase as much.
Explanation: I took the test
0.0
A loaf of bread has a mass of
250.0 g and a volume of
2,575 cm3. What is the
density of the bread?
cm3
10
1
Answer:
0.097 g/cm3
Explanation:
divide mass over volume
HELPPPP I WILL GIVE YOU BRAIN THINGG WHATEVER ITS CALLED
We have learned that there are five steps to reading a new piece of music. Can you name all five steps?
Notes, Pitches, Articulation, Phrasing, and Musical Extras.
An unknown metal has a density of 10.51 g/ml and a mass of 287.8 g. What is the
unknown metal's volume?
Answer:
27.3834443387 so B
Explanation:
M/D=V
287.8/10.51=V
V=27.3834443387
Answer:
27.38
Explanation:
287.8 Divided by 10.51 = 27.38
Please mark brainliest if helped
A meteorologist uses a weather map to explain an upcoming change in weather. The map shows a blue line with triangles approaching a red line with semicircles. Based on the map, which weather prediction is most valid? (1 point) A a significant drop in temperature will occur across the area. B There is no chance of precipitation in the forecast. C Warm temperatures will replace cold temperatures. D Humidity levels will rise.
Answer:
Option C: Warm temperatures will replace cold temperatures.
Explanation:
In a weather map, a warm front is depicted with a red line and red semi circles while a cold front is depicted with a blue line and blue triangles.
Now, we are told that the map shows a blue line with triangles approaching a red line with semi-circles. This means that the cold front is approaching the warm front.
Now a warm front is simply defined as the transition zone where warm air mass gradually replaces a cold air.
Thus, it means the weather map depicts the fact that warm temperature is replacing cold temperature.
Thus; Option C is correct.
Answer: 1: A cold front moved into the area. 2: It would actually be A. A significant drop in temperature will occur across the area. 3: Movement of large air masses. 4: “A Strong Cold Front Threatens the Region”. 5: a meeting of two air masses with major differences in temperature and moisture.
Hope you got 100 because of this!
PLEASE HELP FAST !!!
How should measurement of car 2 be taken to accurately measure the distance it travels? Be sure to include where the meter stick should be placed.
the experimental setup, with car 1 is at the top of a ramp and car 2 at the bottom of the ramp
car 1
/ ←top of ramp
/ ←bottom of ramp
car 2
answer
The meter stick should be placed at the starting position of car 2 at the base of the ramp so that it measures the part of car 2 that will end up the furthest away from the base of the ramp.
explanation
i dont know if this is right or not but my teacher gave me a 90 so there is a 50/50 chance its right or wrong
what is the mass of an atom if it has 11 protons, 12 neutrons, and 11 electrons
A,22, B.23, C34, D 11
Answer:
23, B
Explanation:
The mass of an atom is determined by the number of Protons + Neutrons. Here, if we assume the units is AMU (Which means the mass unit for a proton and neutron would be basically 1), the answer would be 11 + 12 = 23 AMU, which is B.
Answer:
B) 23
Explanation:
Relative Mass = number of protons + number of neutrons
Relative Mass = 11 + 12
Relative Mass = 23
What affects the pressure of an object? *
You are out on a hike, and you notice that the line of telephone wires you have been following along a slope is crooked. Two of the posts are much farther down slope then the others. What has likely occurred on this hillside?
Answer:
The awnser is creep
Explanation:
There don't appear to be any dial tone problems on the telephone caused by broken wires, connectors, wall jacks, or other network-interfering hardware.
What is hardware ?Hardware describes the physical parts of the computer or its delivery mechanisms for the software's written instructions to be stored and executed. The device's intangible component that enables user interaction with the hardware is called the software.
Software is referred to as "soft" because it is flexible, but hardware is referred to as "hard" because it is rigid in terms of modifications. Software often instructs hardware to carry out any command.
Since a smartphone is fundamentally a small computer, it has several parts in common with computers, such as processors and memory. It's critical to balance your demands on this hardware because these components are continuously improved in new phone generations.
Thus, It doesn't seem that any broken wires, connectors, wall jacks, or other network-interfering gear are the root of any dial tone issues on the hardware.
To learn more about hardware, follow the link;
https://brainly.com/question/15232088
#SPJ5
If an atom has 3 protons, what is its atomic number?
Answer:
Atomic Number = 3.
Explanation:
The number of protons determines the atomic number. Basically the number of protons is the exact same as the atomic number.
Protons 3 = Atomic number 3
An object is either copper or brass. The density of copper is 8.96g/ml. The density of brass is 8.73g/mL. I find that my object is 10.08
and has a volume of 1.15mL. What is my object made of?
Your answer:
O Copper
O Brass
O Cannot tell from the information given
please help timed !! due rn !! What happens to particle motion as two substances come to thermal equilibrium?
Answer:
When two substances that are of different temperatures are brought together and there is heat transfer such that the substances come to thermal equilibrium, the effect on the particle motion are as follows
1) The particle motion of the hotter body reduces, because its temperature reduces
2) The particle motion of the colder body increases, because its temperature increases
3) For gases, the volume and or pressure reduces for the hotter body, and if the temperature of the gas falls below the boiling point temperature, the gas will change into liquid
For the colder gas, only the volume and or pressure increases and the temperature rises
4) For liquids, if the temperature of the hotter liquid falls below the melting point, the hotter liquid will become a frozen solid
For the the colder liquid, if the temperature is raised above the boiling point, the liquid changes into gas and the temperature does not rise above the boiling point temperature, until all the cold liquid has evaporated
5) For solids, the vibration of the particles of the hotter substance reduces and the solid becomes more brittle
For the colder body, the rise in temperature causes an increase in vibration of the particles, and if the temperature rises above the melting point, the colder solid will begin to melt
Explanation:
Do all metals have more electrons than protons
Answer:
no
Explanation:
Volume measurement is the best way to measure dry ingredients that may be too small to weigh accurately.
Answer:
uhhh hi
Explanation:
What volume of silver metal will weigh exactly 2500g. The density of silver is 10,5 g/cubic centimeters.
Answer:
26250 cubic centimeters
Explanation:
What is a scale and why do you use it?
Answer:
Scale is defined as a system or series of marks used for measuring or registering. An example of scale is what someone would use to figure out the length of something. An example of scale is what someone would use to find out how much they weigh.
Explanation: