Multiple Choice
Which option best characterizes Reese's choice of less-than-optimal materials in the following scenario?
Reese has just designed a vándshield for an extremely lightweidot car that can be transported by the military via helicopter. The engineers
wanted to use a specially formulated glass that is lighter than ordinary glass, but the cost was far above the budgeted amount for the
project's materials. Reese decides to use a plastic windshield instead.
Economic considerations should never be placed above safety when designing a model
Economic considerations can endanger the safety of a model.
Economic considerations must be considered vihen designing a model
Economic considerations are the most important factor vihen designing a model

Answers

Answer 1

Answer:

Economic considerations must be considered when designing a model.

Explanation:

The engineers wanted to use a specially formulated glass which was lighter than ordinary glass for the design requirement of light weight and portability with helicopter. However the cost was very high than the budgeted amount for the material to be used in the project. The alternative was to use a plastic wind shield. In design perspective considering the weight and portability criteria, this will still work .In the economic perspective, the budget will fit. This concludes that economic considerations must be considered when designing a model. Though this factor might not be the most important one , but it helps in ensuring projects budgets are within expected margins.

Answer 2

Answer:

"The client will use the information gathered from the original design and modify the vehicle."

Explanation:


Related Questions

what is 18x2?????????????????

Answers

36 ez (20 characters)

Answer:

36

Explanation:

because you add 8+8=16

you add a 1 above the other i then 1x2=2+1 =3

then you put the 6 beside the 3 and get

36

Technician A states that a pressure bleeder may be needed to bleed EBC system hydraulic circuits. Technician B states that once the scan tool indicates that the HCU is bled, it may direct you to bleed the brakes manually to remove any remaining air from the system. Who is correct

Answers

Answer:

Both Technician A and Technician B

Explanation:

ABS modulators such as the Ford EBC310 version which are not equipped with bleeders are to have there valves cycled and their pumps activated to enable the bleeding out areas which are not easily bled by the wheel based bleeding

The brakes can be either pressure bled or bled manually, however, the HCU will require additional processes to completely bleed out the system, such as the use of a scan tool

A method used to control density and overcrowding by restricting setbacks, building height, or ratio of open area is known as _________ zoning.

Answers

Answer:

Bulk zoning.

Explanation:

Zoning is a method used by municipal authorities or government authorities to divide a land area into zones. It is a urban planning method. There are several types of zoning; bulk zoning being one of them.

Bulk zoning can be defined as a set of regulations used to control lot size, ratio of floor area, open space, yards, setbacks, bulding height, etc. These setbacks and restrictions, then, help authorities to determine maximun size of a building on a zoning area, and also the positioning of the building.

Therefore, bulk zoning is the correct answer.

What is the primary responsibility of ABET?

A. certifying engineering technologists and engineering technicians

B. administering examinations

C. accrediting educational programs worldwide

D. creating and amending ethical standards for engineers

E. accrediting high schools and universities

Answers

Answer:

C

Explanation:

The ABET (Accreditation Board for Engineering and Technology) is a non-governmental organization that accredits programs in applied science, computing, engineering, and engineering technology, both in the United States and elsewhere.

Give Brainliest pls

Answer:

Give Brainliest. Answer is C. Accrediting educational programs worldwide

Explanation:

The notes stated,

" The ABET ( Accreditation Board for Engineering and Technology ) is a non-governmental organization that accredits programs in applied science, computing, engineering, and engineering technology."

Which is the correct way of dual dimensioning using the position method

Answers

Answer:

by placing one of the two measurements below the other or by separating them with a stroke

Explanation:

I had a test on this and it was correct

Air space used to separate a water supply outlet from any potentially contaminated source is called a(n)
O back-siphoning device
O backflow
O alr gap
O closed water container

Answers

Answer:

air gap

Explanation:

It is also called air doors or fly fans. Air space used to separate a water-supply outlet from any potentially contaminated source. The air space between the floor drain and the drainpipe of a sink is an example. An air gap is the only completely reliable method for preventing backflow.

Answer:

air gap

Explanation:

However, motors are designed so that the polarity of the electromagnet constantly flips. That is, the north pole becomes the
south pole, and the south pole becomes the north pole, every time the electromagnet turns 180 degrees
Why is it designed this way?
OA.
OB.
Oc.
OD.
to conserve the energy in the battery
so the magnetic field will get stronger
so the electromagnet will continuously turn
to constantly polarize the field magnet

Answers

Answer:

c

Explanation:

if the poles didn't flip then the motor would not be able to spin

Explain how Peccerelli's team identifies the bodies they find.

Answers

Answer:

Two methods are;

DNA

Forensic anthropology

Explanation:

Forensic investigators may use DNA samples to classify suspects or evaluate parentage. A DNA profile is just like a  fingerprint.

Digital forensics is a particular sub-field of forensic science that incorporates the application of archaeological skeletal research and methods to solve crime crimes.

Answer:

They identified the bodies using DNA and forensic anthropology and DNA.

Explanation:

How many times has the ITU-R revised the CCIR 601 international standard? A. four B. five C. six D. seven

Answers

Answer:

b or c I think it's c

Explanation:

..............

please answer fast. With full step by step solution.​

Answers

Let f(z) = (4z ² + 2z) / (2z ² - 3z + 1).

First, carry out the division:

f(z) = 2 + (8z - 2) / (2z ² - 3z + 1)

Observe that

2z ² - 3z + 1 = (2z - 1) (z - 1)

so you can separate the rational part of f(z) into partial fractions. We have

(8z - 2) / (2z ² - 3z + 1) = a / (2z - 1) + b / (z - 1)

8z - 2 = a (z - 1) + b (2z - 1)

8z - 2 = (a + 2b) z - (a + b)

so that a + 2b = 8 and a + b = 2, yielding a = -4 and b = 6.

So we have

f(z) = 2 - 4 / (2z - 1) + 6 / (z - 1)

or

f(z) = 2 - (2/z) (1 / (1 - 1/(2z))) + (6/z) (1 / (1 - 1/z))

Recall that for |z| < 1, we have

[tex]\displaystyle\frac1{1-z}=\sum_{n=0}^\infty z^n[/tex]

Replace z with 1/z to get

[tex]\displaystyle\frac1{1-\frac1z}=\sum_{n=0}^\infty z^{-n}[/tex]

so that by substitution, we can write

[tex]\displaystyle f(z) = 2 - \frac2z \sum_{n=0}^\infty (2z)^{-n} + \frac6z \sum_{n=0}^\infty z^{-n}[/tex]

Now condense f(z) into one series:

[tex]\displaystyle f(z) = 2 - \sum_{n=0}^\infty 2^{-n+1} z^{-(n+1)} + 6 \sum_{n=0}^\infty z^{-n-1}[/tex]

[tex]\displaystyle f(z) = 2 - \sum_{n=0}^\infty \left(6+2^{-n+1}\right) z^{-(n+1)}[/tex]

[tex]\displaystyle f(z) = 2 - \sum_{n=1}^\infty \left(6+2^{-(n-1)+1}\right) z^{-n}[/tex]

[tex]\displaystyle f(z) = 2 - \sum_{n=1}^\infty \left(6+2^{2-n}\right) z^{-n}[/tex]

So, the inverse Z transform of f(z) is [tex]\boxed{6+2^{2-n}}[/tex].

Coving is a curved edge between a floor and a wall.
O True
O False

Answers

Uhmmmmmmm it’s True..

Answer:

True.

Explanation:

Which statement is true?

A.Temperature measures the average kinetic energy of particles.
B.Temperature equivalents indicate the same thermal energy.
C.Temperature depends on the density of the substance.
D.Temperature measures the thermal energy of object.

Answers

A.

When temperature increases the motion of particles also increases.

13. This type of insulation comes in rolls and is commonly a fiberglass type
material. It is applied by hand and is stapled when installed on walls. *
A. batt insulation
B. spray foam insulation
C. cellulose insulation
D. none of the above

Answers

Answer:

i think the answer is C.

Explanation:

Answer:

Can you mix cellulose and fiberglass insulation?

No. Even if you have moisture in your attic, once all bypasses are sealed (and/or your roof repaired by a qualified contractor, if necessary) cellulose is blown directly over the existing insulation. ... Adding new cellulose insulation on top of existing fiberglass insulation is called "capping".

Explanation:

Compare similarities between the inventions of Thomas Edison and Bill Gated

Answers

Finance and business

PLEASE HELP ASAP!!!!!!!!!!!!!!!!!!!!!!!!

Which of the following describe what the material of an object can impact?


achievements and failures

geometric shapes and figures

sustainability and durability

durability and achievement

Answers

Answer:

geometric shapes and figures

Answer:

Sustainability and durability

Explanation:

When would you normally use a pin punch?

Answers

Answer:

the main use of a pin punch is to remove pins from a chain provided the diameter and the length of the shank are compatible with the pin dimensions

help ill give BRAINLYEST ( if it lets me )


Determine what each letter represents in the Punnett square.

Letters A and B represent the genotypes of the ______
.Letters C, D, E, and F represent the genotypes of the _______
ps theres no pic
.

Answers

Answer:

Letters A and B represent the genotypes of the Parents

Letters C, D, E, and F represent the genotypes of the Offspring.

Explanation:

The Punnet square is a square shaped figure or diagram used to anticipate the genotypes of offspring after a certain parental cross. It helps in determining the genotype as well as phenotype of the offspring if we know the genotype of parents.

What is the Energy of moving things?

mechanical
sound
nuclear
Light

Answers

Answer: Kinetic energy

Explanation: If you live in a country other than UK you will probably call it something different

Mechanical energy is the answer

Technician A says that the most effective way to diagnose wheel speed sensor circuit faults is to utilize the live data function of your scan tool. Technician B says that once you have identified the affected circuit, the next step is to test at the sensor with a graphing multi-meter or an oscilloscope. Who is correct

Answers

Answer:

Both Technicians A & B are correct

Explanation:

In diagnosing wheel systems, both steps said by technicians A & B are correct because it's the normal procedure to diagnose wheel speed sensor circuit faults.

The point in an electrical circuit that is connected to the negative side of a power supply is called what?
A. Battery source
B. Ground
C. Loop
OD. Short circuit

Answers

The answer is- B. Ground!! Here’s a diagram of it in a diagram.

Answer:

ground or B

Explanation:

Other Questions
Which is not a restriction based on Child Labor Laws in Pennsylvania?A - Minors can not sell or serve alcoholic beveragesB - Must have working papersC- Minors may not work more than 28 hours in a school weekD- Someone 16 years or older can not work before 8 a.m. 14 ft48 ftWhat is the length of the hypotenuse? Sentence using confinement A waiter had fifty-seven customers. If twenty-three left, how many customers would the waiter still have? Give the coordinate of the point where the line crosses the (a) y-axis and (b) the x-axis for the equation y=3x+1 * Solve for n.below..................... Express as a fraction or a mixed number1 1/2% For f(x) = -3x + 8 , find f(x) when x = -2 Rosie balanced the equation below with the lowest coefficients, however she made a mistake.2 AgCl + 2 Mg(NO3)2 --> 1 AgNO3 + 2 MgCl2What was her error and what should the correct answer be? Which of the following subjects were reserved for students preparing to attend a university in the late 19th century? (Select all that apply.)technologycomputer programminghistoryscience Ill give BRAINLYEST What is significant about the sinkings of the RMS Lusitania and the William P Frye?O They strengthened the United States' opposition to joining the war.O They caused the United States to halt trade with the Allied Powers.O They increased tensions between the United States and Germany.O They led the United States to immediately declare war against Germany. which best describes what can happen as a result of radiation Natasha invests $600 in a different bank, she gets $60 after two years workout the interest rate that the bank pay mester Exam 1 11 of 35A car has an oil drip. As the car moves, it drips oil at a regular rate, leaving a trail of spots on the road. Which diagram shows the spotsof car that is continuously slowing down? A 250 N to the east and a 30 N force to the west act on an object. What is the net force on the object? (Remember F also equals the sum of all forces) Ricardo is working on a refrigeration system and needs to know the fluid pressure of a water tank. He knows that the tank is 12 in long, 12 in wide, and 12 in high, and holds 1 cubic foot of water. He also knows that the weight of 1 cubic foot of water is approximately 62.4 lb.What's the fluid pressure? What is the slope of the line with equation y-3=-1/2(x-2)? -2-1/21/22 Can you help me please? Exploring a general idea is the first step in developing your topic. Please select the best answer from the choices provided T F You can burn about 450 calories if you run 5 miles.How many miles will you need to run to burn 630calories?Justify your reasoning.