Answer:
480 Ohms for the calculations
Explanation:
For the calculations:
V = 120 and I = 0.25
V = IR
R = V/I
R = 120/0.25
R = 480 Ohms
For the sentences, I am so sorry, I do not have them yet!
I. The resistance which is needed to generate a current of 0.25 Ampere in the ceiling fan is 480 Ohms.
II. Since current is inversely proportional to the resistance in the electrical circuit, an increase in the current (larger currents) flowing into the electrical circuit of the ceiling fan would cause the resistance to decrease in magnitude at medium and high speeds.
Given the following data:
Voltage = 120 VoltsCurrent = 0.25 AmpereTo calculate the resistance needed to generate that current, we would apply Ohm's law:
Ohm's law states that at constant temperature, the current flowing through an electrical circuit is directly proportional to the voltage (potential difference) applied across the two terminals of the electrical circuit and inversely proportional to the resistance in the electrical circuit.
Mathematically, Ohm's law is given by the formula;
[tex]V=IR[/tex]
Where;
V is the voltage measured in Volts.I is the current measured in Ampere.R is the resistance measured in Ohms.Making R the subject of formula, we have:
[tex]R =\frac{V}{I}[/tex]
Substituting the given parameters into the formula, we have;
[tex]R=\frac{120}{0.25}[/tex]
Resistance, R = 480 Ohms
Since current is inversely proportional to the resistance in the electrical circuit, an increase in the current (larger currents) flowing into the electrical circuit of the ceiling fan would cause the resistance to decrease in magnitude at medium and high speeds.
In conclusion, the larger the current, the lower the resistance would be at both medium and high speeds.
Read more on resistance here: https://brainly.com/question/23754122
Which wave has the highest frequency?
Answer:
e
Explanation:
It is possible to create a wave having some frequency on a rope and then gradually it will become faster. During this time wavelength becomes shorter. Here the wave 'e' is found to has highest frequency. The correct option is E.
What is frequency of a wave?The number of oscillations of a wave per unit time is defined as the frequency. It is usually measured in Hertz and the frequency is directly proportional to the pitch. Humans can hear sounds with frequencies ranging between 20-20000 Hz.
The sounds with frequencies over the human ears range are called the ultrasonic sound and sounds with frequencies less than the audible range are called infrasonic sound. The wavelength and frequency are inversely proportional to each other.
When wavelength increases, frequency decreases and vice versa. So here wave E has maximum number of vibrations.
Thus the correct option is E.
To know more about frequency, visit;
https://brainly.com/question/18125929
#SPJ2
SECOND remake of a question i made... IF YOU PLACE ANY NON-BRAINLY QUESTION LINK I WILL LOOSE MY (QUACK)ING MIND BECAUSE IM HAVING ENOUGH OF PEOPLE BREAKING MY BRAINLY!
(the screenshot is the original question that was broken by Brianbobtv placing a virus link into the answer box... and the first remake was broken by Brianfps for the same thing but a different virus link [a common one you'll see] please read everything in the screenshot before answering)
For the love of all that is holy and not, please don't place a link at all... or ill loose my mind im surprised i didn't loose it yet from the second brainly break... the screenshot is everything from the first question of this... the second is the question separated from the original question... the third is the star amount meaning
Answer:
C.) decreases, stronger
Explanation:
Since gravitational force is inversely proportional to the square of the separation distance between the two interacting objects, more separation distance will result in weaker gravitational forces. So as two objects are separated from each other, the force of gravitational attraction between them also decreases; however, as the two objects are closer to each other, the force of the gravitational attraction between them also increases (stronger).
A ball is thrown from ground level at an angle of 0 and the initial velocity components are 7.5m/s and 13m/s. Ignoring air resistance, calculate each of:
1- The initial velocity is vi
2- The value of the angle at which the ball was thrown
3 - The horizontal range of the ball R
I assume you mean an angle of θ, and not 0. I also assume the given components of the initial velocity are horizontal and vertical, respectively, so that
1. the initial velocity vector is
[tex]\boxed{\vec v_i = (7.5\,\vec\imath + 13\,\vec\jmath) \dfrac{\rm m}{\rm s}}[/tex]
which means the ball is thrown with an initial speed of
√((7.5 m/s)² + (13 m/s)²) ≈ 15 m/s,
and
2. the angle made by [tex]\vec v_i[/tex] with the positive horizontal axis is θ such that
[tex]\tan(\theta) = \dfrac{13}{7.5} \implies \theta \approx \arctan(1.7) \approx \boxed{60^\circ}[/tex]
3. At time t, the ball attains a height y and horizontal range x according to
y = (13 m/s) t - g/2 t²
x = (7.5 m/s) t
where g = 9.8 m/s². When the ball reaches the ground (y = 0) for t > 0, we have
(13 m/s) t - g/2 t² = 0
13 m/s - g/2 t = 0
t = 2 (13 m/s)/g = (26 m/s)/g
Plugging this time into the x equation gives a horizontal range of
x = (7.5 m/s) (26 m/s)/g ≈ 20. m
What are the two factors that affect the gravitational pull between two objects?
Answer:
hen dealing with the force of gravity between two objects, there are only two things that are important – mass, and distance.
Explanation:
2Cu + 02 —> 2Cuo
In the equation above, what is the
coefficient of the oxygen molecule?
A) O
B) 1
C) 2.
D) 4
Answer:
C
Explanation:
Complete the following sentence. Pressure in a liquid depends on the __________ of the liquid.
Answer:
density
Explanation:
because it is directly proportional
Pressure in a liquid depends on the density of the liquid.
What is density?Density is defined as the mass per unit volume. It is an important parameter to understand the fluid and its properties. Its unit is kg/m³.
The pressure in the liquid is;
P = ρgh
Where,
h is the height
ρ is the density
g is the acceleration due to gravity
The density of a liquid determines its pressure.
Hence, density is the correct answer.
To learn more about the density refer to the link;
https://brainly.com/question/952755
#SPJ2
A length of organ pipe is closed at one end. If the speed of sound is 344 m/s, what length of pipe is needed to obtain a fundamental frequency of 63 hz?.
Answer:
Node-Antinode for a pipe closed at one end (fundamental)
The length of such a pipe would be wavelength / 4
lambda (wavelength) = speed / frequency = 344 m/s / 63 / sec = 5.46 m
The pipe would have to be 5.46 / 4 = 1.36 m
a 10kg model rocket is fired at a 60 degree angle from horizontal from the football field with a thrust of 200N. what is the acceleration of the rocket?
Answer:
the acceleration of the rocket is: a=vemΔmΔt−g a = v e m Δ m Δ t − g .
Explanation:
I answered this before.
hope this helps! :)
If you blow up a balloon, tie it off, and release it, it will fall to the ground.
Why does it fall instead of float?
NO LINKS YA FILTHY VERMINS
Answer:
carbon dioxide (what you are blowing up the balloon with) is a heavy gas. so when you fill the Balloon with it, the balloon will not float. helium is a light gas and floats. gravity takes another. part in this
What are the variables that affect the force of gravity between objects?
What are the advantages and/or disadvantages of the radiation that technology has had for the human economy?
The total mass of the carts is 1000 kg. The first
drop is 77.7 m. What is the speed of the coaster
at the bottom of the hill?
Answer:41xm/s
Explanation:
Answer:41xm/s
Explanation:
I found this for you hope it helps.
how do humans affect the lithosphere
What would be the extension of the spring for a 3 N weight if the extension of the spring was 4 mm for a 50 g mass?
А 4 mm B)8 mm C)12mm D)24 mm
Answer:
24mm
Explanation:
3 N to g is 305.9 g
50g ---- 4 mm
305.9 ----- 4×305.9/50 = 24 mm
What are the definitions of initial horizontal velocity and initial vertical velocity? NO LINKS! STOP SCAMMING ME CARTOKUN AND CARTERMANATOR!
if acceleration due to gravity is 10m/s², what will be the potential energy of a body of mass 2 kg kept at a height of 5 meter ?
Answer:
50J
Explanation:
Ep = mgh
Here,
m = 1kg; g = 10 m/s2; h = 5m
So, Ep = 1kg*10m/s2*5m
= 50J
So, the potential energy is 50J (Ans).
The amount of heat that is needed to raise the temperature of 1
kg of some material by 1°C is called the of the material.
a. specific heat
b. state
c. temperature
d. charge
Answer:
a. specific heat
Explanation:
a. specific heat
please help pleaseeeeee
Answer:
25mg
Explanation:
it basically explains itself
In an exothermic reaction, energy is
the surroundings.
In an endothermic reaction, energy is
the surroundings.
Trick to identify:-
Exothermic reaction has +∆H sign on product sideEndothermic reaction has -∆H sign on product side or +∆H sign on reactant sideAnswer:
In an exothermic reaction, energy is
✔ released to
the surroundings.
In an endothermic reaction, energy is
✔ absorbed from
the surroundings.
Explanation:
Which of toby's answers is a correct description of what happens when a 1-kg cart traveling at 1 m/s collides inelastically with another 1-kg cart at rest?.
Answer:
hi I don't know sorry sorry forgive me
Explanation:
sorry
PLS HURRY THIS IS DUE TODAY!!!
I WILL GIVE BRAINLIEST!!!!
NO LINKS AND NO STEALING POINTS,
PLS ANSWER IF YOU KNOW FOR SURE WHAT IT IS!!!
THE QUESTION IS IN THE PICTURE ATTACHED!
Answer:
B. between carbon and oxygen
Explanation:
formaldehyde has a carbon atom that has single bonds with two hydrogen atoms on both sides, and it has a double bond with oxygen.
Answer:
The placement of the double bond is between carbon atom and oxygen atom
this same question was for me so I did and got it correct
please mark me as brainliest
HEEEEEELLLLLLLLPPPPPPPP!!!!!!!!!!
Answer:
True
True
False (Temperature measures the average kinetic energy of the particles in a substance. Thermal energy measures the total kinetic energy of the particles in a substance.)
False (is true only if both object have the same mass)
False (it's 100°)
True
True
True
True
False (Substances with a high specific heat require a lot of heat to have their temperature raised by one degree. On the other hand, substances with a low specific heat require a smaller amount of heat, like most metals)
Please answer correctly.
Will give the brainliest !!!
Urgent !!!
Please help !!
A train is running at a speed of 60 m/s . what will this speed be in km/h ?
don't answer if u don't know
spammers = reported
Speed= 60 m/s
for converting m/s to km/h =multiply with 5/18
for converting km/h to m/s= multiply with 18/5
so, 60 × ( 18/50) = 216 km/h
What is/are the difference between wavelength and spectral lines?
Answer:
Definition of spectral line: one of a series of linear images formed by a spectrograph or similar instrument and corresponding to a narrow portion of the spectrum of the radiation emitted or absorbed by a particular source.
Definition of Wavelength: can be defined as the distance between two successive crests or troughs of a wave. It is measured in the direction of the wave. ... Wavelength is inversely proportional to frequency. This means the longer the wavelength, lower the frequency.
So, the spectrum is the range of wavelength in visible light. While, wavelength is the length of a wave.
Explanation:
I hope this helps!
A ball is fired from a cannon at point 1 and follows the trajectory shown in the figure below. Air
resistance may be neglected. Five possible vectors are also shown in the figure; the letter E represents
the zero vector.
D
E:
C
B
a
Which vector best represents the ball's velocity at position 2?
Which vector best represents the ball's acceleration at point 2?
Which vector best represents the ball's velocity at position 3?
Which vector best represents the ball's acceleration at point 3?
du
b)
A
d)
In trajectory, acceleration vector is not the same with the velocity vector but it depends on the change in velocity. The acceleration path is perpendicular to the velocity vector path. The Correct answers are:
a.) D
b.) B
c.) C
d.) A
A Vector is a quantity that has both magnitude and direction.
Given that a ball is fired from a cannon at point 1 and follows the trajectory shown in the figure.
a.) The vector best represents the ball's velocity at position 2 is D
b.) The vector best represents the ball's acceleration at point 2 is B
c.) Which vector best represents the ball's velocity at position 3 = C
d.) Which vector best represents the ball's acceleration at point = A
In trajectory, acceleration vector is not the same with the velocity vector but depends on the change in velocity. The acceleration path is perpendicular to the velocity vector path.
At point 3, since the ball path is parabolic, the velocity at that point is not equal to zero but will tend to take a horizontal path.
Learn more here: https://brainly.com/question/25519989
answer question 7 please
Where is the natural light display called aurora borealis located?
The natural light display called aurora borealis is located in the northern
hemisphere.
There are two types of aurora which are called aurora borealis and aurora
australis. The aurora borealis is located in the Northern hemisphere while
the aurora australis is located in the Southern hemisphere.
They receive their energy through the interaction of charged particles
on the Sun and Earth to produce the light display. An example
of the interaction involves solar wind with atoms of the upper atmosphere.
Read more on https://brainly.com/question/20191244
Answer:
northern and southern hemisphere
Explanation:
A block requires an applied force of 20N to begin moving it to the right. What is the maximum static friction?
a. Less than 20 N
b. Exactly 20 N
c. Just over 20 N
d.Twice as much as the block's weight
Answer:
A.
Explanation:
Thats my answer
Please make me branlies answer
A truck with a mass of 1500 kg is decelerated at a rate of 5m/s2.how much force did this require ?
Answer:
6500N
Explanation:
F = ma so therefore Were given mass (m) = 1500 kg, acceleration (a) = 5 m/s2, well have to calculate the force to be:
1500 x 5 = 6500 N