Answers
Answer: B
Explanation: I can tell the block weights more since the water went down
Related Questions
what is the area of the triangle in this coordinate plane? responses 17.5 units² 17.5 units² 21.0 units² 21.0 units² 35.5 units² 35.5 units² 49.0 units²
Answers
The area of the triangle in this coordinate plane with vertices at (0, 0), (4, 0), and (0, 7) is 14 units².
To find the area of a triangle in a coordinate plane, we can use the formula:
Area = 0.5 * base * height
In this case, the base is the distance between the points (0, 0) and (4, 0), which is 4 units. The height is the distance between the point (0, 0) and the line containing the point (0, 7).
The line containing the point (0, 7) is vertical and parallel to the y-axis, so the height is simply the y-coordinate of the point (0, 7), which is 7 units.
Plugging these values into the formula, we have:
Area = 0.5 * 4 * 7
= 14 units²
Therefore, the area of the triangle is 14 units².
To know more about area of the triangle, here
brainly.com/question/19305981
#SPJ4
--The complete Question is, Consider a triangle in a coordinate plane with vertices at (0, 0), (4, 0), and (0, 7). What is the area of the triangle? --
A spot of paint on a bicycle tire moves in a circular path of radius 0.29 m. When the spot has traveled a linear distance of 2.48 m , through what angle has the tire rotated? Give your answer in radians.
Answers
A spot of paint on a bicycle tire moves in a circular path of radius 0.29 m. When the spot has travelled a linear distance of 2.48 m , through 8.551 radian angle has the tire rotated.
To find the angle in radians through which the tire has rotated, we can use the relationship between the linear distance travelled, the radius of the circular path, and the angle in radians.
The formula to relate these quantities is:
Arc length = radius * angle
Given:
Radius (r) = 0.29 m
Linear distance (s) = 2.48 m
Angle (in radians) = Arc length / radius
Angle (in radians) = s / r
Angle (in radians) = 2.48 m / 0.29 m
Angle (in radians) ≈ 8.551 radians
Therefore, when the spot of paint on the bicycle tire has travelled a linear distance of 2.48 m, the tire has rotated through an angle of approximately 8.551 radians.
To know about linear distance here
https://brainly.com/question/13589970
#SPJ4
T/F. the hr diagram displays the apparent magnitude of stars.
Answers
False. The Hertzsprung-Russell (HR) diagram does not display the apparent magnitude of stars.
The HR diagram is a plot that illustrates the relationship between the absolute magnitude (luminosity) and the spectral type or surface temperature of stars. The vertical axis represents the absolute magnitude, which is a measure of a star's intrinsic brightness or luminosity. The horizontal axis represents the spectral type or surface temperature, usually indicated by the stellar color or spectral class. The HR diagram helps astronomers classify stars and understand their evolutionary stages.
Apparent magnitude, on the other hand, refers to how bright a star appears to an observer on Earth. It takes into account the star's intrinsic luminosity as well as its distance from Earth. While the apparent magnitude is an important parameter for studying stars, it is not directly represented on the HR diagram. Instead, the HR diagram provides information about a star's luminosity and temperature, enabling scientists to study stellar properties, evolutionary stages, and relationships between different types of stars.
To learn more about Hertzsprung-Russell refer:
https://brainly.com/question/31775643
#SPJ11
If the Wronskian W of f and g is te2t, and if f(t) = t, find g(t). - NOTE: Use c as an arbitrary constant. Enter an exact answer. g(t) =
Answers
If the Wronskian W of f and g is te2t, and if f(t) = t, g(t) = (1/3)t - (1/9)e^(4t) + Ce^t
To find g(t), we can use the Wronskian (W) relationship between f(t) and g(t). The Wronskian (W) is defined as:
W(f, g) = f(t)g'(t) - f'(t)g(t)
Given that the Wronskian W of f(t) and g(t) is te^2t, and f(t) = t, we can substitute these values into the Wronskian equation:
te^2t = t * g'(t) - 1 * g(t)
Simplifying the equation, we have:
te^2t = tg'(t) - g(t)
Now, let's solve this differential equation for g(t). We can rearrange the equation to isolate the derivative term:
tg'(t) - g(t) = te^2t
Next, we'll use an integrating factor to solve the equation. The integrating factor (denoted as μ) is given by:
μ = e^∫(-1) dt = e^(-t)
Multiplying both sides of the equation by the integrating factor, we get:
e^(-t) * [tg'(t) - g(t)] = e^(-t) * te^2t
Simplifying further:
e^(-t) * tg'(t) - e^(-t) * g(t) = te^(t + 2t) = te^(3t)
Now, we can rewrite the left side of the equation using the product rule for differentiation:
d/dt (e^(-t) * g(t)) = te^(3t)
Integrating both sides with respect to t:
∫d/dt (e^(-t) * g(t)) dt = ∫te^(3t) dt
Integrating the left side yields:
e^(-t) * g(t) = ∫te^(3t) dt
The integral on the right side can be solved using integration by parts. Applying integration by parts, we have:
∫te^(3t) dt = (1/3)te^(3t) - (1/3)∫e^(3t) dt
Simplifying further:
∫te^(3t) dt = (1/3)te^(3t) - (1/9)e^(3t) + C
where C is the constant of integration.
Therefore, the equation becomes:
e^(-t) * g(t) = (1/3)te^(3t) - (1/9)e^(3t) + C
To solve for g(t), we divide both sides by e^(-t):
g(t) = (1/3)t - (1/9)e^(4t) + Ce^t
where C is the arbitrary constant.
So, the exact form of g(t) is:
g(t) = (1/3)t - (1/9)e^(4t) + Ce^t
To learn more about arbitrary constant, click here:
https://brainly.com/question/31727362
#SPJ11
If 1,000 mL = 1 L, which of the following are possible conversion factors for liters and milliliters? Check all that apply.
1,000 mL/1 L
1 mL/1,000 L
Answers
Both of these conversion factors are valid because they are derived from the same relationship between liters and milliliters. 1,000 mL/1 L converts milliliters to liters by dividing by 1,000, while 1 mL/1,000 L converts liters to milliliters by multiplying by 1,000.
If 1,000 mL = 1 L, the possible conversion factors for liters and milliliters are 1,000 mL/1 L and 1 mL/1,000 L. A conversion factor is a ratio of two equivalent measures that allows you to convert one unit of measure to another. The conversion factor is always a fraction that includes both units of measure. To convert between liters and milliliters, you must use the appropriate conversion factor.The abbreviation "mL" stands for milliliter. A milliliter is a metric unit of volume equal to one-thousandth of a liter, which is the base unit of volume in the International System of Units (SI). There are 1,000 milliliters in one liter, which means that 1 liter is equivalent to 1,000 milliliters. As a result, you can convert between liters and milliliters using either of the following conversion factors:1,000 mL/1 L1 mL/1,000 L
to know more about conversions visit:
https://brainly.com/question/30567263
#SPJ11
Consider the damped mass-spring system for mass of 0.3 kg, spring constant 4.4 N/m, damping 0.36 kg/s and an oscillating force 2.1cos(ωt) Newtons. That is,
0.3x′′+0.36x′+4.4x=2.1cos(ωt).
What positive angular frequency ω leads to maximum practical resonance?
ω=
What is the maximum displacement of the mass in the steady state solution when the we are at practical resonance:
C(ω)=
Answers
The positive angular frequency ω leads to a maximum practical resonance is ≈ 3.77 rad/s.
The maximum displacement of the mass in the steady-state solution when we are at practical resonance is ≈ 0.392 m.
To find the positive angular frequency (ω) that leads to maximum practical resonance in the given damped mass-spring system, we can use the concept of the resonant frequency.
The resonant frequency (ωr) can be calculated using the formula:
ωr = √(k / m - (ζ² / 4m²))
where k is the spring constant, m is the mass, and ζ is the damping coefficient.
In this case, the given values are:
k = 4.4 N/m
m = 0.3 kg
ζ = 0.36 kg/s
Substituting these values into the formula, we can solve for ωr:
ωr = √(4.4 / 0.3 - (0.36² / 4(0.3)²))
= √(14.6667 - 0.432)
= √(14.2347)
≈ 3.77 rad/s
Therefore, the positive angular frequency (ω) that leads to maximum practical resonance is approximately 3.77 rad/s.
Now, let's calculate the maximum displacement of the mass in the steady-state solution when we are at practical resonance.
The amplitude of the steady-state solution (C(ω)) can be calculated using the formula:
C(ω) = F0 / √((k - mω²)² + (ζω)²)
where F0 is the amplitude of the oscillating force.
Given:
F0 = 2.1 N
k = 4.4 N/m
m = 0.3 kg
ζ = 0.36 kg/s
ω = ωr (at practical resonance)
Substituting these values into the formula, we can calculate C(ω):
C(ωr) = 2.1 / √((4.4 - 0.3(3.77)²)² + (0.36(3.77))²)
≈ 0.392 m
Therefore, the maximum displacement of the mass in the steady-state solution when we are at practical resonance is approximately 0.392 meters (or 39.2 cm).
Learn more about practical resonance at
https://brainly.com/question/31482302
#SPJ4
a stone is dropped from the top of a cliff. the splash it makes when striking the water below is heard 2.7 s later. how high is the cliff?
Answers
The height of the cliff is 36.18 m
Here, the solution is as follows,
A stone is dropped from the top of a cliff.
The splash it makes when striking the water below is heard 2.7 s later.
Initial velocity, u = 0
Acceleration due to gravity, a = 9.8 m/s²
Time taken, t = 2.7 s
Using the formula for the distance covered by a freely falling object,
S = ut + 1/2 at²
Here, S represents the height of the cliff
Substituting the given values ,
S = ut + 1/2 at²
S = 0 × 2.7 + 1/2 × 9.8 × (2.7)²
S = 36.18 m
Therefore, the height of the cliff is 36.18 m.
Learn more about to measure height:
brainly.com/question/14524817
#SPJ11
can the 21-cm be used to determine the movement of interstellar gas through the galaxy?
Answers
Yes, the 21-cm line can be used to determine the movement of interstellar gas through the galaxy.
This is because the 21-cm spectral line corresponds to the transition of hydrogen atoms between two different spin states. It is a useful tool in astronomy because hydrogen gas is the most abundant element in the universe.The 21-cm line can be used to measure the Doppler shift of interstellar gas, which provides information about its velocity relative to the observer. By observing the 21-cm line emission from different regions of the galaxy, astronomers can create a map of the velocity distribution of interstellar gas. This is important because the movement of gas is closely related to the dynamics of the galaxy as a whole. The 21-cm line has been used extensively in studies of the Milky Way galaxy and other galaxies. By measuring the velocity of gas in the Milky Way, astronomers have been able to map out the rotation curve of the galaxy. This has provided important information about the distribution of mass in the galaxy, including the presence of dark matter.
To know more about interstellar gas visit:
https://brainly.com/question/31445920
#SPJ11
which sound frequency could a human detect? responses 1 hertz 1 hertz 10 hertz 10 hertz 50 hertz 50 hertz 50,000 hertz
Answers
A human can typically detect sound frequencies ranging from 20 hertz to 20,000 hertz (or 20 kilohertz).
The range of frequencies that humans can hear is known as the audible frequency range. The lower limit of this range, around 20 hertz, represents the lowest frequency that most individuals can perceive as a sound. Frequencies below this range are referred to as infrasound. On the other hand, the upper limit of the audible frequency range is typically around 20,000 hertz, or 20 kilohertz, beyond which frequencies are considered ultrasonic. The ability to hear different frequencies varies among individuals and can also be influenced by factors such as age and exposure to loud noises. Younger individuals generally have a wider range of hearing, including higher frequencies, while the ability to hear higher frequencies tends to decrease with age. Additionally, certain conditions or hearing impairments can affect an individual's frequency range.
To learn more about sound frequencies, Click here:
https://brainly.com/question/3262170
#SPJ11
what is type of cloud is especially prevalent when the atmosphere is very stable near the base of a thunderstorm.
Answers
The type of cloud that is especially prevalent when the atmosphere is very stable near the base of a thunderstorm is the Cumulus congestus cloud.
Cumulus congestus clouds are towering cumulus clouds that are particularly high and occur in areas where air rises and condenses, forming cloud layers. As a result, the cloud base grows to a great height, indicating that the atmosphere is extremely moist and unstable. When the clouds reach a certain height, they may start to produce rainfall. These clouds are frequently associated with thunderstorms, but they can also form on their own in the absence of thunderstorms.In addition, Cumulus congestus clouds can form in regions where there is a significant temperature difference between the ground and the upper atmosphere, which causes unstable atmospheric conditions. These clouds can grow to be quite large, with heights of up to 6 km (20,000 ft) or more. They are frequently linked with atmospheric instability, which can result in severe weather such as thunderstorms, tornadoes, and other severe weather events.
Know more about thunderstorm, here:
https://brainly.com/question/32480003
#SPJ11
an airplane propeller is rotating at 300 rpm. (a) compute the propeller’s angular velocity in rad/s. (b) how many seconds does it take for the propeller to turn through 45º?
Answers
An airplane propeller is rotating at 300 rpm.
(a) The propeller’s angular velocity is 10π rad/s.
(b) It take 0.25 seconds for the propeller to turn through 45º.
a) To compute the propeller's angular velocity in rad/s, we can convert from revolutions per minute (rpm) to radians per second (rad/s).
Angular velocity in rpm = 300 rpm
To convert to rad/s, we use the conversion factor:
1 revolution = 2π radians
Angular velocity in rad/s = (Angular velocity in rpm) * (2π radians / 1 revolution) * (1 minute / 60 seconds)
Angular velocity in rad/s = (300 rpm) * (2π radians / 1 revolution) * (1 minute / 60 seconds)
Angular velocity in rad/s = 10π rad/s
Therefore, the propeller's angular velocity is 10π rad/s.
(b) To find the time it takes for the propeller to turn through 45º, we can use the formula:
Time = Angle / Angular velocity
Angle = 45º = (45/180)π radians
Angular velocity = 10π rad/s
Time = (45/180)π radians / (10π rad/s)
Time = (45/180) * (1/10) seconds
Time = 0.25 seconds
Therefore, it takes 0.25 seconds for the propeller to turn through 45º.
To know more about angular velocity here
https://brainly.com/question/30237820
#SPJ4
One-dimensional compressible flow of ideal air (R=287 J/kg.K and k=1.4) moves through the duct below. The pressure and temperature of air in the tank are 300kPa and 300K, respectively. The throat area is 0.05 m2. If there is a normal shock wave at a section where the area is 0.07 m2. What is the Mach number just downstream of the shockwave? Ath = 0.05 m2 Air 300 kPa 300
Answers
The Mach number just downstream of the shock wave is 1.95.
The shock wave just after the throat creates a new flow field. A normal shock wave is a shock wave that forms at a right angle to the incoming flow stream. The Mach number downstream of a normal shock is a function of the upstream Mach number. At the same time, there is a unique ratio of specific heats (γ), which is usually 1.4 in air, and the ratio of downstream to upstream pressures P2/P1, which is a feature of the fluid.
The relationship between the upstream Mach number and the downstream Mach number is given by the following equation:M_2^2 = [(γ-1) M_1^2 + 2]/[(2γ/(γ+1)) M_1^2 - (γ-1)/(γ+1)] Where M1 = the Mach number upstream of the shock wave and M2 = the Mach number downstream of the shock wave. The area change ratio (A2/A1) is given by:M_2/M_1 = (A_1/A_2){[2γ/(γ+1)] [(1-M_1^2/γ+M_1^2/γ+1)]}^[(γ+1)/2(γ-1)]Given, A_1 = 0.05m² and A_2 = 0.07m²M_1 can be calculated from the area ratio:A_1/A_2 = M_2/M_1 (1+[(γ-1)/2]M_2^2/γ)^[(γ+1)/2(γ-1)]A_1/A_2 = 0.05/0.07 = 0.71428M_1 can be calculated from the above equation after substituting the values.A_1/A_2 = M_2/M_1 (1+[(γ-1)/2]M_2^2/γ)^[(γ+1)/2(γ-1)]0.71428 = M_2/M_1 (1+[(γ-1)/2]M_2^2/γ)^[(γ+1)/2(γ-1)]0.71428 = M_2/M_1 (1+0.39556M_2^2)^(7/5)A trial-and-error approach is now used to solve the above equation using various values for M2, such as 1.2, 1.3, and so on.
Know more about downstream, here:
https://brainly.com/question/14158346
#SPJ11
an electron travels at a speed of 8.60 x 10^7 m/s. what is its total energy
Answers
The total energy of an electron traveling at a speed of 8.60 x 10^7 m/s is (3.68 x 10^-15) J.
The total energy of an electron can be calculated by the formula E=0.5mv², where E is the total energy, m is the mass of the electron and v is the velocity of the electron. We know that the speed of the electron is 8.60 x 10^7 m/s. The mass of an electron is 9.109 x 10^-31 kg.Using the formula, we can calculate the total energy as follows:E = 0.5 x (9.109 x 10^-31 kg) x (8.60 x 10^7 m/s)²E = 3.68 x 10^-15 JTherefore, the total energy of an electron traveling at a speed of 8.60 x 10^7 m/s is (3.68 x 10^-15) J. The total energy is dependent on the velocity of the electron and the mass of the electron.
Know more about electron, here:
https://brainly.com/question/12001116
#SPJ11
at what temperature, in °c, is a certain reaction at equilibrium if ∆h = 86.6 kj/mol and ∆s = 170.2 j/mol ･ k?
Answers
To determine the temperature, in °C, at which a certain reaction is at equilibrium if ∆H = 86.6 kJ/mol and ∆S = 170.2 J/mol K, we can use the equation given below:ΔG = ΔH - TΔS. At equilibrium, ΔG = 0. Thus, we can write:0 = ΔH - TΔS.
Thus, solving for T, we can write T = ΔH / ΔS. We are given:ΔH = 86.6 kJ/mol and ΔS = 170.2 J/mol K.
To convert ΔH to J/mol, thus:ΔH = 86.6 kJ/mol × 1000 J/kJ = 86,600 J/mol.
Putting the given values into the formula for T, we get T = ΔH / ΔS= 86,600 J/mol / 170.2 J/mol K= 509.6 K.
To convert the temperature from Kelvin to Celsius, we can use the formula given below: T in °C = T in K - 273.15.
Thus, putting in the value of T in Kelvin, we get: T in °C = 509.6 K - 273.15= 236.45 °C.
Therefore, the temperature at which the given reaction is at equilibrium is 236.45 °C.
Learn more about equilibrium here ;
https://brainly.com/question/30694482
#SPJ11
material 1 has an index of refraction of 1.15.material 2 has an index of refraction of 2.30.if light passes from air into each of these materials at the same angle of incidence, how will the angle of refraction in material 1 compare to the angle of refraction in material 2?
Answers
When light travels from one medium to another, its speed changes and consequently it refracts. Hence, the correct option is the angle of refraction in material 1 will be less than the angle of refraction in material 2.
Refraction occurs due to a change in the speed of light as it travels from one medium to another of different density. The refractive index of a medium is the ratio of the speed of light in vacuum to the speed of light in that medium. If light passes from air into each of these materials at the same angle of incidence, how will the angle of refraction in material 1 compare to the angle of refraction in material 2?The angle of refraction, which is the bending of the path of light as it passes through a medium, is determined by the refractive index of the medium. The greater the refractive index of the medium, the greater the angle of refraction. According to Snell's law, the ratio of the sines of the angles of incidence and refraction is constant and is equal to the ratio of the refractive indices of the two media. The angle of incidence is equal to the angle of refraction if the light travels from one medium to another of the same refractive index. Here, the index of refraction for material 1 is 1.15 and for material 2 is 2.30. Therefore, the angle of refraction in material 1 will be greater than the angle of refraction in material 2 because the refractive index of material 1 is less than half of that of material 2. This means that material 1 bends the light less than material 2.
to know more about Refraction visit:
https://brainly.com/question/32038813
#SPJ11
A baseball is hit at an angle horizontal with the ground. Suppose the initial velocity is 100 feet per second. An outfielder catches the ball 300 feet from home plate. Find the angle given the range is determined by the following function
Answers
The angle at which the baseball was hit is approximately 17.5 degrees with respect to the ground from the given initial velocity.
To find the angle, we use the formula for the range of a projectile, which is R = (v^2 * sin(2θ)) / g, where R is the range, v is the initial velocity, θ is the angle, and g is the acceleration due to gravity. Given the initial velocity of 100 feet per second and the range of 300 feet, we rearrange the formula to solve for θ. By plugging in the values, we calculate that the angle is approximately 17.5 degrees. This means that the baseball was hit at an angle of 17.5 degrees relative to the ground. This angle is measured horizontally, indicating the direction of the initial velocity of the baseball. When a projectile is launched at an angle, its trajectory is a combination of horizontal and vertical motion. In this case, the baseball traveled a horizontal distance of 300 feet before being caught by the outfielder.
To learn more about initial velocity, Click here:
https://brainly.com/question/18560874
#SPJ11
when the charges in the rod are in equilibrium, what is the magnitude eee of the electric field within the rod? express your answer in volts per meter to at least three significant figures.
Answers
When the charges in the rod are in equilibrium, the net electric field within the rod is zero.
In equilibrium, the positive and negative charges distribute themselves in such a way that the electric forces between them balance out. This cancellation of electric fields results in a net electric field of zero within the rod.
The positive and negative charges create electric fields that have equal magnitudes but opposite directions, leading to their mutual cancellation.
As a result, there is no electric field within the rod, and the magnitude of the electric field is zero volts per meter (0 V/m) to at least three significant figures. This signifies a state of electrical equilibrium where the forces acting on the charges are balanced.
To know more about the net electric field refer here :
https://brainly.com/question/30577405#
#SPJ11
if the systolic pressures of two patients differ by 10 millimeters, by how much would you predict their diastolic pressures to differ? round the answer to three decimal places.
Answers
Systolic pressure variation is a non-invasive method to assess fluid responsiveness and volume status. In a positive pressure breath, it is the difference between the maximum and minimum systolic blood pressure values.
Thus, A positive pressure breath begins with a brief rise in systolic blood pressure (delta up), which is swiftly followed by a fall in systolic blood pressure (delta down) after four or five beats.
Because of decreased preload to the right ventricle, increased afterload to the right ventricle, and decreased afterload to the left ventricle, increases in intrathoracic pressure during positive pressure ventilation result in a decrease in systolic blood pressure.
When there is hypovolemia, this decline is higher. Hypovolemia has been identified using systolic pressure variations in response to respiratory fluctuation.
Thus, Systolic pressure variation is a non-invasive method to assess fluid responsiveness and volume status. In a positive pressure breath, it is the difference between the maximum and minimum systolic blood pressure values.
Learn more about Systolic pressure, refer to the link:
https://brainly.com/question/15175692
#SPJ1
You wish to create an image that is 10 meters from an object. This image is to be upright and half the height of the object. You wish to accomplish this using one spherical mirror.
What is the focal length f of the mirror that would accomplish this?
Express your answer in meters, as a fraction or to three significant figures.
Answers
To create an upright image that is half the height of the object and located 10 meters from the object using a spherical mirror, we need to determine the focal length (f) of the mirror.
In this scenario, we can use the mirror equation to find the focal length. The mirror equation relates the object distance (dₒ), image distance (dᵢ), and the focal length of the mirror (f) using the formula: 1/f = 1/dₒ + 1/dᵢ.
Given that the image is located 10 meters from the object and has half the height of the object, we know that the magnification (m) is -1/2. The magnification is given by the formula: m = -dᵢ/dₒ.
Since the magnification is negative, it indicates that the image is upright. By substituting the known values into the magnification formula, we can solve for the object distance (dₒ).
With the object distance known, we can then substitute the object distance and image distance into the mirror equation. Rearranging the equation, we can solve for the focal length (f).
By substituting the values into the equation, we can calculate the focal length (f) of the spherical mirror that would create the desired image.
Learn more about mirror equation here:
https://brainly.com/question/31097794
#SPJ11
The position of a mass oscillating on a spring is given byx = (6.8 cm) cos[2πt/(0.91 s)].
(a) What is the frequency of this motion?
(b) When is the mass first at the position x =-6.8cm?
Answers
(a) The frequency of this motion is approximately 1.10 Hz. (b) The mass is first at the position x = -6.8 cm approximately 0.46 seconds after the start of the motion.
(a) The frequency of the motion can be determined from the equation x = A cos(2πft), where A is the amplitude of the oscillation, f is the frequency, and t is the time.
Comparing the given equation x = (6.8 cm) cos[2πt/(0.91 s)] to the standard equation, we can see that the angular frequency, 2πf, is equal to 2π/(0.91 s).
Therefore, the frequency f is given by:
f = 1/T
where T is the period of the motion. The period can be obtained from the angular frequency:
T = 2π/(2πf) = 1/f
Substituting the given values:
T = 1/(2π/(0.91 s)) = 0.91 s
Thus, the frequency of the motion is:
f = 1/T = 1/0.91 s ≈ 1.10 Hz
Therefore, the frequency of this motion is approximately 1.10 Hz.
(b) To find when the mass is first at the position x = -6.8 cm, we can equate the given equation to -6.8 cm:
-6.8 cm = (6.8 cm) cos[2πt/(0.91 s)]
Dividing both sides by 6.8 cm:
-1 = cos[2πt/(0.91 s)]
To find the time t, we need to find the angle whose cosine is -1. The cosine function is equal to -1 when the angle is π radians (180 degrees).
So we have:
2πt/(0.91 s) = π
Simplifying and solving for t:
2πt = π * 0.91 s
2πt = π * 0.91 s
t = (π * 0.91 s) / (2π)
t ≈ 0.46 s
Therefore, the mass is first at the position x = -6.8 cm approximately 0.46 seconds after the start of the motion.
To learn more about frequency visit:
brainly.com/question/12967589
#SPJ11
A 3.0 kg block hanging from a spring scale is submerged in a beaker of water until the spring scale reads 20 N. What is the buoyant force on the block? (A) 10 N (B) 17 N (C) 37 N (D) 50 N (E) It cannot be determined without knowing the dimensions of the block.
Answers
The buoyant force on the block is 10 N.
The buoyant force is equal to the weight of the fluid displaced by the submerged object. In this case, the weight of the fluid displaced is equal to the weight of the block, which is 20 N according to the spring scale reading. Since the block weighs 3.0 kg, its weight is given by the formula weight = mass × gravitational acceleration.
Thus, the weight of the block is 3.0 kg × 9.8 m/s² = 29.4 N. Therefore, the buoyant force acting on the block is equal to the weight of the fluid displaced, which is 20 N. Hence, the answer is (A) 10 N.
Learn more about buoyancy here:
rainly.com/question/30641396
#SPJ11
An electric current I = 0.25 A is flowing in a long wire. Consider a rectangular area with one side parallel to the wire and at a distance c = 0.049 m away from the wire. Let the dimensions of the rectangle be (WIDTH)a = 0.054 m and (length)b = 0.051 m.
Calculate the numerical value of φ in T⋅m2.
Answers
The numerical value of φ is approximately 8.55 × 10⁻⁸ T⋅m² if the electric current I = 0.25 A is flowing in a long wire.
To calculate the numerical value of φ, which represents the magnetic flux, we can use the formula
φ = B × A
φ is the magnetic flux,
B is the magnetic field strength, and
A is the area through which the magnetic field passes.
Given that we have a current flowing in a long wire, we can use Ampere's law to determine the magnetic field strength B at a distance c from the wire. Ampere's law states that the magnetic field around a long wire is proportional to the current passing through the wire and inversely proportional to the distance from the wire.
B = (μ₀ × I) / (2π × c)
B is the magnetic field strength,
μ₀ is the permeability of free space (constant, approximately 4π × 10⁻⁷ T⋅m/A),
I is the current flowing in the wire, and
c is the distance from the wire.
Plugging in the values, we have
B = (4π × 10⁻⁷ T⋅m/A) × (0.25 A) / (2π × 0.049 m)
Simplifying the equation, we get
B = (4π × 10⁻⁷ T⋅m/A) × (0.25 A) / (2π × 0.049 m)
B ≈ 1.63 × 10⁻⁵ T
Now, we can calculate the magnetic flux φ by multiplying the magnetic field strength B by the area A
φ = B × A
φ = (1.63 × 10⁻⁵ T) × (0.054 m × 0.051 m)
Calculating the numerical value, we find
φ ≈ 8.55 × 10⁻⁸ T⋅m²
To know more about electric current here
https://brainly.com/question/29766827
#SPJ4
A homemade capacitor is assembled by placing two 10-in. pie pans 5 cm apart and connecting them to the opposite terminals of a 9-V battery.
A) Estimate the capacitance.
B) Estimate the charge on each plate.
C) Estimate the electric field halfway between the plates.
D) Estimate the work done by the battery to charge the plates.
E) Which of the above values change if a dielectric is inserted?
Answers
The homemade capacitor consists of two 10-inch pie pans separated by a distance of 5 cm and connected to a 9-V battery. We need to estimate the capacitance, charge on each plate, the electric field between the plates, work done by the battery, and values change.
A) To estimate the capacitance, we can use the formula [tex]C = \Sigma_0 A/d[/tex], where C is the capacitance, [tex]\Sigma_0[/tex] is the permittivity of free space ([tex]8.85 * 10^-^1^2 F/m[/tex]), A is the area of the plates, and d is the distance between them. The area of a 10-inch pie pan is approximate [tex]0.053 m^2[/tex]. Plugging in these values, we get [tex]C = (8.85 * 10^-^1^2 F/m)(0.053 m^2)/(0.05 m) = 9.5 *10^-^1^0 F[/tex].
B) The charge on each plate can be calculated using the formula Q = CV, where Q is the charge, C is the capacitance, and V is the voltage. With the given voltage of 9 V and the calculated capacitance, we have [tex]Q = (9.5 * 10^-^1^0 F)(9 V) = 8.6 * 10^-^9 C[/tex] on each plate.
C) The electric field between the plates can be estimated using the formula E = V/d, where E is the electric field, V is the voltage, and d is the distance between the plates. Plugging in the values, we get [tex]E =(9 V)/(0.05 m) = 180 V/m[/tex].
D) The work done by the battery to charge the plates is given by [tex]W = 1/2 CV^2[/tex]. Using the calculated capacitance and the voltage, we have [tex]W = (1/2)(9.5 * 10^-^1^0 F)(9 V)^2 = 3.85 * 10^-^8 J[/tex].
E) If a dielectric is inserted between the plates, the capacitance will increase. The charge on each plate remains the same, as it depends on the voltage and the original capacitance. The electric field between the plates will decrease due to the presence of the dielectric. The work done by the battery will also increase because the capacitance is larger with the dielectric present.
Learn more about capacitance here:
https://brainly.com/question/31871398
#SPJ11
A hammer in an out-of-tune piano hits two strings and produces beats of 4 Hz. One of the strings is tuned to 129 Hz.
Randomized Variables
fB = 4 Hz
f1 = 129 Hz
Part (a) What is the highest frequency the other string could have?
Part (b) What is the lowest frequency the other string could have?
Answers
The lowest frequency the other string could have is 125 Hz.
Beats are produced when two waves of varying frequencies clash, resulting in both constructive and destructive interference. The subsequent impedance is a vibration of the wave, which is capable as an increment and lessening in the plentifulness of the sound heard; These changes are called beats.
Beats help musicians tune instruments like pianos, guitars, and violins, making them useful in music. Two strings of various frequencies and beats A sledge in an unnatural piano hits two strings and delivers beats of 4 Hz. The frequency of one of the strings is 129 Hz.
Let's say the second string has a frequency of f2. We can compute the recurrence of the other string as:
f1-f2 = 4 Hzf1 = 129 Hzf2 = 129 - 4 Hzf2 = 125 Hz, which means that the other string's lowest possible frequency is 125 Hz.
The number of times an event occurs in a given amount of time is known as its frequency. It is also sometimes referred to as temporal frequency for clarity and to distinguish it from spatial frequency. The frequency of recurrence is estimated to be one hertz (Hz), or one occasion per second.
Know more about frequency, here:
https://brainly.com/question/29739263
#SPJ11
The height, h meters, of a soccer ball kicked directly upward can be modeled by the equation h(t)=-4.9t2 + 13.1t+1, where t is the time, in seconds, after the ball was kicked.
Answers
The soccer ball is 38/5 or 7.6 meters high after 2 seconds.
How to solve for the heightThe equation you've given is a quadratic function that models the height of the soccer ball over time, considering gravitational pull.
To find the height of the ball after 2 seconds, we substitute t = 2 into the equation:
h(t) = -4.9t² + 13.1t + 1.
Therefore,
h(2) = -4.9*(2)² + 13.12 + 1
= -4.94 + 26.2 + 1
= -19.6 + 26.2 + 1
= 7.6 meters.
So, the soccer ball is 7.6 meters high after 2 seconds.
Read more on height here:https://brainly.com/question/1739912
#SPJ1
The height, h meters, of a soccer ball kicked directly upward can be modeled by the equation h(t)=-4.9t2 + 13.1t+1, where t is the time, in seconds, after the ball was kicked.
How high is the ball after 2 seconds?
A gas has an initial volume of 24. 6 L at a pressure of 1. 90 atm and a temperature of 335 K. The pressure of the gas increases to 3. 50 atm, and the volume of the gas increases to 31. 3 L
Answers
The Charles law states that if the pressure of a gas is kept constant, then the volume of the gas is directly proportional to the temperature of the gas. This law is represented mathematically asV/T = kwhere V is the volume of the gas, T is the temperature of the gas, and k is the proportionality constant.
In this law, it is assumed that the pressure of the gas is kept constant. Thus, if the temperature of the gas increases, the volume of the gas will also increase, and vice versa. The volume of a gas can be calculated using the ideal gas law, which states thatPV = nRTwhere P is the pressure of the gas, V is the volume of the gas, n is the number of moles of gas, R is the universal gas constant, and T is the temperature of the gas. In this law, it is assumed that the gas is ideal, which means that the gas particles do not have any volume and do not attract or repel each other.
Given,Initial Volume, V1 = 24.6 LInitial Pressure, P1 = 1.9 atmInitial Temperature, T1 = 335 KFinal Volume, V2 = 31.3 LFinal Pressure, P2 = 3.5 atmThe number of moles of gas can be calculated asn = PV/RTwhere R = 0.0821 L atm mol-1 K-1Substituting the values,n1 = (1.9 atm)(24.6 L)/(0.0821 L atm mol-1 K-1)(335 K)n1 = 1.05 moln2 = (3.5 atm)(31.3 L)/(0.0821 L atm mol-1 K-1)(335 K)n2 = 1.83 molThe amount of gas is the same, so n1 = n2. Therefore, the temperature must remain constant.Thus, the volume of the gas increased as expected according to the Charles law.
To know more about proportionality visit :
https://brainly.com/question/8598338
#SPJ11
White light is sent through an interface of a 100% (w/v) glycerol solution (n1 = 1.474) and a 20% (w/v) sucrose solution (n2=1.364) At an angle of: A) Theta=33 degree, determine the angle of Theta2 in degrees (*) B) Theta 1 =0degree, determine the angle or Theta2 in degrees (*) A) Theta2= Number degree B) Theta2= Number degree
Answers
A) The angle of theta 2 is approximately 37.19 degrees and B) Theta 2 is 0 degrees.
A) When white light passes through an interface between two media with different refractive indices, it undergoes refraction. In this case, the light is passing from glycerol (n1 = 1.474) to sucrose (n2 = 1.364).
Using Snell's law, which states that n1sin(Theta1) = n2sin(Theta2), we can calculate Theta2.
Given:
n1 = 1.474
n2 = 1.364
Theta1 = 33 degrees
Plugging in the values into Snell's law, we have:
1.474 * sin(33) = 1.364 * sin(Theta2)
Now, solving for Theta2:
sin(Theta2) = (1.474 * sin(33)) / 1.364
Theta2 = arcsin((1.474 * sin(33)) / 1.364)
Using a calculator, we find that Theta2 is approximately 37.19 degrees.
Therefore, A) Theta2 = 37.19 degrees.
B) In this case, Theta1 is 0 degrees, meaning the light is incident perpendicular to the interface.
Using Snell's law:
n1 * sin(Theta1) = n2 * sin(Theta2)
Since sin(0) = 0, the equation simplifies to:
n1 * 0 = n2 * sin(Theta2)
As n1 and sin(0) are both zero, there is no bending or refraction of light. The light passes straight through the interface without changing direction. Therefore, B) Theta2 = 0 degrees.
In conclusion, A) Theta2 is approximately 37.19 degrees, and B) Theta2 is 0 degrees.
To learn more about theta, visit
https://brainly.com/question/18441622
#SPJ11
the light energy produced from this led bulb came from a coal- fired power plant. what was the original source of the energy found in the coal that was used to produce the electricity for the light bulb? a. the oceans c. sunlight b. atmospheric gases d. uranium 238
Answers
The original source of the energy found in the coal that was used to produce the electricity for the light bulb was the sunlight. Coal was formed from the remains of dead plants and animals that lived millions of years ago. option c.
In ancient times, plants absorbed energy from the sun to form their tissues. Coal is a type of fossil fuel formed from the decayed remains of ancient plants that were buried deep beneath the earth's surface. The energy stored in the plants was converted into coal over time through a process called carbonization. When coal is burned in a coal-fired power plant to produce electricity, the energy stored in the coal is released as heat. This heat is used to create steam, which in turn drives a turbine to produce electricity. The energy that powers the light bulb, therefore, comes from the burning of coal in the power plant. However, the original source of the energy found in the coal was the sunlight that the plants absorbed during their lifetime. Coal-fired power plants are a major source of electricity around the world. They are relatively inexpensive to build and maintain, and coal is abundant in many parts of the world. However, burning coal also releases large amounts of carbon dioxide and other greenhouse gases into the atmosphere, contributing to climate change and other environmental problems.
to know more about carbonization visit:
https://brainly.com/question/30271313
#SPJ11
a worker stands still on a roof sloped at an angle of 27° above the horizontal. he is prevented from slipping by a static frictional force of 320 n. find the mass of the worker.
Answers
The mass of the worker is approximately 720.65 kg. To find the mass of the worker, we can use the equation relating static friction and the normal force on an inclined plane.
To find the mass of the worker, we can use the equation relating static friction and the normal force on an inclined plane.
The static frictional force (F_friction) acting on the worker is given as 320 N.
The force of gravity acting on the worker can be decomposed into two components: the normal force (N) perpendicular to the surface of the roof and the gravitational force (mg) acting vertically downward.
The normal force is equal in magnitude and opposite in direction to the component of the gravitational force perpendicular to the roof. This can be calculated as N = mg * cos(θ), where θ is the angle of the roof.
Since the worker is in equilibrium and not slipping, the static frictional force is equal in magnitude and opposite in direction to the component of the gravitational force parallel to the roof. This can be calculated as F_friction = mg * sin(θ).
We can rearrange the equation for the static frictional force to solve for the mass (m):
m = F_friction / sin(θ).
Substituting the given values, we have:
m = 320 N / sin(27°) ≈ 720.65 kg.
Therefore, the mass of the worker is approximately 720.65 kg.
To learn more about static friction click here
https://brainly.com/question/30886698
#SPJ11
when____ type of lighting is used, characters and figures are clearly lit with bright images.
Answers
When high-key lighting is used, characters and figures are clearly lit with bright images. High-key lighting is a lighting technique characterized by a predominance of light tones and minimal shadows.
It involves using an abundance of light sources or high-intensity lighting to evenly illuminate the scene, resulting in a well-lit and cheerful ambiance.
High-key lighting is commonly employed in genres such as comedies, romantic films, and musicals, where a bright and upbeat atmosphere is desired.
By reducing the contrast between light and shadow, high-key lighting creates a sense of openness, positivity, and a visually pleasing aesthetic, allowing the audience to focus on the characters and their expressions without distractions caused by dark or dramatic lighting.
To know more about high-key lighting, refer here:
https://brainly.com/question/30034200#
#SPJ11