Answer:
Planets, moons, asteroids and sun
What would the axes be labelled on a graph that allows you to calculate VELOCITY?
A disk initially rotates counterclockwise at 1.0 rad.S but has a counterclockwise angular acceleration of 0.50rad/s^2 for 2.0s after this acceleration the disk is at an angle of 6.0 what us the disk angular position when the acceleration started
Answer:
Explanation:
initial angular velocity is ω₀ = 1 rad /s
angular acceleration α = - 0.5 rad /s²
time t = 2 s.
Let the initial angular position be θ .
angular displacement = 6 - θ . rad .
angular displacement = ω₀ t - 1/2 α t²
6 - θ = 1 x 2 - 0.5 x 0.5 x 2²
6 - θ = 2 - 0.5 x 0.5 x 2²
= 2 - 1 = 1
θ = 6 - 1 = 5
5 rad is the answer.
what is the difference between mechanical advantage and distance advantage?
true or false force vectors have direction only
Answer:
The answer is true
Explanation:
:D
You need to pick up a book off the floor and place it on a tabletop. You expend 1.56J of energy to lift the book with a force of 300N. What is the distance?
Work done = Froce × distance
Now, keeping this formula in mimd, we can find the distance as follows;
= 1.56 = 300 × distance
= 1.56/300 = distance
= 156/30000 = distance
= 0.0052 m = distance
Lets convert it into cm so that you don't get troubled seeing it :)
= 1 m = 100cm
= 0.0052 × 100
= 0.52 cm
Please help with this question
Answer:
This unbalanced force causes her to change in direction.
If the forces on an object are unbalanced, this is what happens:
a stationary object starts to move in the direction of the resultant force
a moving object changes speed and/or direction in the direction of the resultant force
[tex]\boxed{\large{\bold{\textbf{\textsf{{\color{blue}{Answer}}}}}}:)}[/tex]
A skier is at the top of the mountain facing east. The skier then decides to skis to the westward side of the mountains and pushes off .The unbalanced for causes her to change in Direction.
Which of the following would be a valid method to increase the buoyant force acting on an object?
Select one:
a. Making the object as wide as possible.
b. Removing material from the object.
c. Making the object's volume as small as possible.
d. Making the object hollow.
A net force of 60 N north acts on an object with a mass of 30 kg. Use Newton's second law of
motion to calculate the amount of acceleration the object will experience. Then explain how the
amount of acceleration will change if the net force or the mass of the object increases.
Answer:
Explanation:
F = ma. For us, this looks like
60 = 30a and
a = 2 m/s/s
If the force goes up to, say, 90, then
90 = 30a and
a = 3...if the force goes up, the acceleration also goes up.
If the mass goes up to say, 60, and the force stays the same, then
60 = 60a and
a = 1...if the mass goes up, the acceleration goes down.
the M.E = K.E + P.E. If the M.E of the football is 150 J and when it's thrown the K.E is 70 J. What is the P.E of the football?
Answer:
M.E = K.E +P.E
150=70+P.E
P.E=150 –70
P.E=80J
What If Earth got Kicked Out of the Solar System?
Answer:
We wouldn't have our moon and sun. The earth will be colder and darker
Explanation:
Answer:
mars will become habitabe
Explanation:
true fact and every planet will become close to sun
Un motor realiza un trabajo de 5000 j en 20 s a) ¿ cual es la potencia del motor ?B)¿en cuanto tiempo desarollan el mismo trabajo una maquina de 15 w ?
Answer:
a. Potencia = 250 Watts
b. Tiempo = 333.33 segundos
Explanation:
Dados los siguientes datos;
Energía = 5000 Joules
Tiempo = 20 segundos.
Para encontrar el poder;
Poder = energía/tiempo
Potencia = 5000/20
Potencia = 250 Watts
B. ¿Para saber cuánto tarda una máquina en realizar el mismo trabajo;
Dado: potencia = 15 W
Tiempo = energía/poder
Tiempo = 5000/15
Tiempo = 333.33 segundos
Two people are sitting on wheeled chairs 1 metre apart. Person A is holding a 2kg ball. Person A throws the ball to Person. What happens to person A? Explain.
a.) their chair stays still
b.) chair rolls backwards
c.) chair rolls forwards
Answer:
B - Person A's chair rolls backwards.
Explanation:
This can be seen simply through the Conservation of Momentum. When the ball is thrown to be, the ball's momentum(+m) is transfererd to B, so B's chair moves forward(think about it - it makes sense, doesn't it?), meaning A's chair moves backwards.
So, B.
EXTRA TIP: Try drawing a diagram to help you!
se lanza un cuerpo desde el origen con velocidad horizontal de 40 m/s, y con un ángulo de 60º. calcular la máxima altura y el alcance horizontal.
Answer:
1. [tex]h = 244.8 m[/tex]
2. [tex]x = 564.8 m[/tex]
Explanation:
1. La altura máxima se puede calcular usando la siguiente ecuación:
[tex] v_{f}^{2} = v_{0}^{2} - 2gh [/tex] (1)
Where:
[tex]v_{f_{y}}[/tex]: es la velocidad final = 0 (en la altura máxima)
[tex]v_{0_{y}}[/tex]: es la velocidad inicial horizontal en "y"
g: es la gravedad = 9.81 m/s²
h: es la altura máxima =?
La velocidad incial en "y" se puede calcular de la siguiente manera:
[tex] tan(\theta) = \frac{v_{0_{y}}}{v_{0_{x}}} [/tex]
[tex] v_{0_{y}} = tan(60)*40 m/s = 69.3 m/s [/tex]
Resolviendo la ecuación (1) para "h" tenemos:
[tex]h = \frac{v_{0_{y}}^{2}}{2g} = \frac{(69.3 m/s)^{2}}{2*9.81 m/s^{2}} = 244.8 m[/tex]
2. Para calcular el alcance horizontal podemos usar la ecuación:
[tex]x = v_{x}*t[/tex]
Primero debemos encontrar el tiempo cuando la altura es máxima ([tex]v_{f_{y}}[/tex] = 0).
[tex] v_{f_{y}} = v_{0_{y}} - gt [/tex]
[tex] t = \frac{v_{0_{y}}}{g} = \frac{69.3 m/s}{9.81 m/s^{2}} = 7.06 s [/tex]
Ahora, como el tiempo de subida es el mismo que el tiempo de bajada, el tiempo máximo es:
[tex] t_{m} = 2*7.06 s = 14.12 s [/tex]
Finalmente, el alcance horizontal es:
[tex]x = 40 m/s*14.12 s = 564.8 m[/tex]
Espero que te sea de utilidad!
If a positively charged rod is brought near the knob of a positively charged electroscope, the leaves of the electroscope will...
A) converge, only
B) diverge, only
C) first diverge, then converge
D) first converge, then diverge
Answer:
B
Explanation:
if a positively charged rod is brought near the knob of a neutral electroscope, it will attract some electrons up from the leaves onto the knob. That process causes both of the leaves to be positively charged (excess protons), and the leaves will diverge.
A truck covers 40 km with an average speed of 80km/h. Then it travels another 40 km with an average speed of 40 km/h. The average speed of the truck for the total distanced covered is:
Answer:
Average speed = 53.33 km/h
Explanation:
Below is the calculation for the average speed:
Given the average speed of for first 40 km = 80km/h
Time taken to cover the first 40 km = Total Distance / average speed
Time taken to cover the first 40 km = 40 / 80 = 0.5 hours
Given the average speed of for next 40 km = 40km/h
Time taken to cover the next 40 km = Total Distance / average speed
Time taken to cover the next 40 km = 40 / 40 = 1 hours
Now the average speed of the tuck to cover total distance:
Average speed = Total distance / Total time
Average speed = (40 + 40) / (0.5 + 1)
Average speed = 53.33 km/h
please help!!
A 1.50 V battery has a 32.0 Ohm
resistor attached. How much
current flows through the circuit?
(Unit = A)
Answer:
0.0469
Explanation:
v=1.50
r=32.0
i=?
equation
i=v/r
i=1.50/32.0
i=0.046875
round to 3 sig figs
i=0.0469
Answer:
.0469
Explanation:
acellus
The frequency of sound is 200 Hz. What does it mean? Please help me
Explanation:
A wave having a frequency of 200 Hz means that 200 such waves pass through a point per second.
what is negitive acceleration?
According to our principle, when an object is slowing down, the acceleration is in the opposite direction as the velocity. Thus, this object has a negative acceleration.An object with negative acceleration could be speeding up, and an object with positive acceleration could be slowing down.
Answer:
Answer
When decrease in velocity is called negative acceleration
Explanation:
What is the strength of an electric field 0.2 m from a 1.56 x 10-6 C charge?
Answer:
Solution given:
strength of electric field [E]:?
distance[d]:0.2m
charge[Q]=[tex]1.56×10^{-6} C[/tex]
we have
E =K [tex] \frac{Q}{r²}[/tex]
E=[tex]9×10^{9} C[/tex][tex] \frac{1.56×10^-6 C}{0.2²} [/tex]
E=[tex] 3.51×10^{5}[/tex]V/m
strength of electric field : [tex] 3.51×10^{5}[/tex]V/m
Describe the movements that occur along each of the three types of faults. Describe the movements that occur along each of the three types of faults.
Answer:
Explanation:
strike-slip, normal and thrust
mark her as brainiest, :) I don't need it :P
explain chamical enargy
Answer:Chemical energy
Explanation:, Energy stored in the bonds of chemical compounds. Chemical energy may be released during a chemical reaction, often in the form of heat; such reactions are called exothermic.
Answer:
Hope this helps
Explanation:
Chemical energy, Energy stored in the bonds of chemical compounds Chemical energy may be released during a chemical reaction, often in the form of heat such reactions are exothermic. The chemical energy in food us converted by the body into mechanical energy and heat .
Fish are hung on a spring scale to determine their mass (most fishermen feel no obligation to truthfully report the mass). What is the force constant of the spring in such a scale if it the spring stretches 8.50 cm for a 8.1 kg load
Answer:
k = 933.88 N/m
Explanation:
Given that,
The mass of a load, m = 8.1 kg
The displacement in the spring, x = 8.5 cm
We need to find the force constant of the spring. We know that Hooke's law is given by :
F = -kx
Also,
F = mg (Force due to its weight)
So,
[tex]k=\dfrac{mg}{x}\\\\k=\dfrac{8.1\times 9.8}{0.085}\\\\k=933.88\ N/m[/tex]
So, the force constant of the spring is equal to 933.88 N/m.
Which of the following best describes the formation of surf? Waves energy, rebounding from its impact with shore, crashes into oncoming waves, causing them to break. Entering shallow water forces wave energy upward, making the wave crest unstable and causing it to break. A wave encountering shallow water begins to slow at its bottom, while the top of the wave continues at its previous speed. This causes the wave to break. As waves enter shallow water, the distance between wave crests (wave length) shortens, increasing the tendency to break.
Answer:
The question above would be written again but this time with options attached to it for comprehension sake:
Which of the following best describes the formation of surf?
A. Waves energy, rebounding from its impact with shore, crashes into oncoming waves, causing them to break.
B. Entering shallow water forces wave energy upward, making the wave crest unstable and causing it to break.
C. A wave encountering shallow water begins to slow at its bottom, while the top of the wave continues at its previous speed. This causes the wave to break.
D. As waves enter shallow water, the distance between wave crests (wavelength) shortens, increasing the tendency to break.
The correct answer is option C (A wave encountering shallow water begins to slow at its bottom, while the top of the wave continues at its previous speed. This causes the wave to break).
Explanation:
Surf could mean crashing waves or breaking waves. Generally, the wave speed is constant in the same medium, however, the wave speed decreases as it enters shallow water which is largely due to the water depth which is relatively small, especially when it encounters the bottom of the shallow water. While the top of the wave overtakes the bottom of the wave, making sure the top of the wave continues at its previous speed.
A beam strikes an irregular mirror and is reflected as shown below. The angle formed by the incoming beam and the reflected beam is 10 degrees. What is the angle of the mirror's surface (measured against vertical) at the location where the beam strikes the mirror?
A. The mirror's surface is angled 5 degrees upward where the laser strikes it.
B. The mirror's surface is angled 5 degrees downward where the laser strikes it.
C. The mirror's surface is angled 10 degrees upward where the laser strikes it.
D. The mirror's surface is angled 10 degrees downward where the laser strikes it.
Answer:
the correct answer is B
Explanation:
The law of reflection states that the angles of incidence and reflection on a surface are the same, the two rays and the normal are in the same part of the surface.
In this exercise indicate that the angle between the incident and reflected ray is 10, therefore the angle with respect to the normal that is a vertical line at the point of contact of the ray must be 5
Consequently the correct answer is B
How to find the acceleration?
Answer:
speed/time
Explanation:
Answer:
a= (Vf - Vi)
t
To find acceleration (a) you need to subtract the finale velocity (Vf) minus the initial velocity (vi) divided by time (t) as shown in the equation above.
Nitrogen gas at standard atmospheric pressure 101.3 kPa, has a volume of 0.080 m3. If there are 3.6 mol of the gas, what is the temperature?
Answer:
271 K
Explanation:
Answer:
The temperature of Nitrogen is 270.85 K.
Explanation:
What is perfect gas ?A gas that follows Boyle's law , Charle's law and law of pressure , is called perfect gas.
Given data;
[tex]P =101.3 KPa , V = 0.08 m^{3} , \\ n = 3.6 mol , R = 8.31\\T = ?[/tex]
By the formula,
P.V = n .R.T
On putting values
[tex]1.013[/tex] x [tex]10^{5}[/tex] x [tex]0.08[/tex] = [tex]3.6[/tex] x [tex]8.31[/tex] x [tex]T[/tex]
So [tex]T =\frac{1.013*10^{5} * 0.08}{3.6 * 8.31}[/tex]
[tex]T =\frac{8104}{29.92}[/tex]
[tex]T = 270.85 K[/tex]
Hence the temperature of Nitrogen is 270.85 K
For more details also read -
https://brainly.com/question/12744632?referrer=searchResults
#SPJ2
CAN ANYONE HELP WITH THESE QUESTIONS :,] PLS IS URGEN IM SO CLOSE TO FAILING ALSO ITS SCIENCE PHYSICS I THINK
SEND ME A MESSAGE
PLEASE DO THIS SCIENCE QUESTION I WILL MARK YOU THE BRAINLIEST NO LINKS
Answer:
Float
Explanation:
The objects weight 14n and the buoyant force is 12n, so it will sink because the weight is greater than the buoyant force.
Equation: p = m/v
Newton discovered
a
that gravity is universal.
b
gravity.
c
that apples hurt when they fall on your head.
d
none of the above
Answer:
b-gravity
Explanation:
newton discovered the general concept of gravity and how it effects earth. he didn't discord it so much as the concept of it.
Newton discovered gravity.
Hope this helps; please mark me brainliest!
Have a wonderful day!
Eroded debris that is dropped at the glaciers farthest extent when ice melts at the front of the glacier as seen in the image is called
A. Terminal Moraines
B. Lateral Moraines
c. Gradient
D. Striations
Answer:
A) terminal moraines
Explanation:
Moraines are the rocks and sediments deposited by moving glaciers. Terminal means the end, the furthest the glacier travels. Lateral means what's deposited along the sides of the moving glacier.