the mean distance of an asteroid from the sun is 4.55 times that of earth from the sun. from kepler's law of periods, calculate the number of years required for the asteroid to make one revolution about the sun.

first of all the formula of force is F=ma,so we are searching for m,so we can divide a on both sides F/a=m, after this substitute the values given above 64N/4.51=14.2°Kg

Answer:

its a. and jusing that youl

Answer:

D

Explanation:

This will not change the weight and therefore not change the inertia

A dump truck contains a load of soil. The action that will leave the dump truck's inertia unchanged is that increase the force applied by the engine. Hence, option D is correct.

A body's ability to resist being propelled into motion or, if already moving, to modify the direction or magnitude of its velocity is known as inertia.

An object's lethargy is a passive quality that prevents it from doing anything other than obstructing active forces and torques. The only reason a moving body continues to move is the lack of a force that might slow it down, alter its trajectory, or accelerate it. This is not due to inertia.

A body's inertia moment about a certain axis and its mass, which determine how resistant it is to the application of forces to that axis, respectively, are two statistical measures of inertia.

To know more about Inertia:

https://brainly.com/question/3268780

#SPJ2

The height of the tower is 20.41 m.

To determine the height of the tower, we need to understand the concept of the energy conservation principle since the speed and acceleration due to gravity are involved in the system.

The principle of energy conservation lets us know that in an isolated system, energy can neither be created nor destroyed.

[tex]\mathbf{mgh = \dfrac{1}{2}mv_1^2 = \dfrac{1}{2}mv_2^2}[/tex]

By applying the energy conservation principle, we have:

[tex]\mathbf{gh +\dfrac{1}{2}v_1^2 = \dfrac{1}{2}v_2^2}[/tex]

[tex]\mathbf{h = \dfrac{v_2^2- v_1^2 }{2 \times g}}[/tex]

[tex]\mathbf{h = \dfrac{25^2-15^2 }{2 \times 9.8}}[/tex]

h = 20.41 m

Learn more about the energy conservation principle here:

https://brainly.com/question/22236101

False.

Tripling the height will triple the potential energy.

Speed has nothing to do with potential energy.

Answer:

Is this your question? Also I think work done is a scalar quantity.

Explanation:

Answer:

N = 1.42 × 10⁴ cycles

Explanation:

Given that:

frequency f = 4.9 × 10¹⁴ Hz

Time = 2.9 × 10⁻¹¹ s

Speed = 2.3 × 10⁸ m/s

Recall that:

wavelength [tex]\lambda = \dfrac{c}{f} \\ \\[/tex]

Horizontal distance [tex]\Delta x = ct[/tex]

Number of wavelengths [tex](N) = \dfrac{\Delta x}{\lambda}[/tex]

[tex]N = \dfrac{ct}{c/f} \\ \\ N= ft[/tex]

N = (4.9 × 10¹⁴ cycles/s) (2.9 × 10⁻¹¹ s)

N = 14210

N = 1.42 × 10⁴ cycles

Answer:

the tension in the part of the cord attached to the textbook is 7.4989 N

Explanation:

Given the data in the question;

As illustrated in the image below;

first we determine the value of the acceleration,

along vertical direction; we use the second equation of motion;

y = ut + [tex]\frac{1}{2}[/tex]a[tex]_y[/tex]t²

we substitute;

0 m/s for u, 1.29 m for y, 0.850 s for t,

1.29 = 0×0.850  + [tex]\frac{1}{2}[/tex]×a[tex]_y[/tex]×(0.850)²

1.29 = 0.36125a[tex]_y[/tex]

a[tex]_y[/tex] = 1.29 / 0.36125

a[tex]_y[/tex] = 3.5709 m/s²

Now when the text book is moving with acceleration , the dynamic equation will be;

T₁ = m₁a[tex]_y[/tex]

where m₁ is the mass of the text book ( 2.10 kg )

a[tex]_y[/tex] is the vertical acceleration ( 3.5709 m/s² )

so we substitute

T₁ = 2.10 × 3.5709

T₁ = 7.4989 N

Therefore, the tension in the part of the cord attached to the textbook is 7.4989 N

Answer:

8

Explanation:

(8√2)² = x² + x²

8² × √2² = 2x²

64 × 2 = 2x²

128 = 2x²

64 = x²

x = 8

give me brainliest please

[tex] \Large {\underline { \sf {Required \; Solution :}}}[/tex]

We have ―

We have been asked to calculate the acceleration of the car.

[tex]\qquad \implies\boxed{\red{\sf{ F = ma }}}\\[/tex]

[tex] \quad \twoheadrightarrow\sf { 450 = 1300a} \\ [/tex]

[tex] \quad \twoheadrightarrow\sf {\cancel{ \dfrac{450}{1300}} = 1300a} \\ [/tex]

[tex]\quad\twoheadrightarrow\boxed{\red{\sf{0.346 \; ms^{-2} = a }}}\\[/tex]

Therefore, acceleration of the car is 0.346 m/s².

Answer:

hey mate......looks like the question is incomplete

Answer:

6 oxygen

Explanation:

3 multiply O2 and 6 Oxygen

Answer:

α = 2,857 10⁻⁵ ºC⁻¹

Explanation:

The thermal expansion of materials is described by the expression

          ΔL = α Lo ΔT

          α = [tex]\frac{\Delta L}{L_o \ \Delta T}[/tex]

in the case of the bar the expansion is

         ΔL = L_f - L₀

         ΔL=   1.002 -1

         ΔL = 0.002 m

the temperature variation is

         ΔT = 100 - 30

         ΔT = 70º C

we calculate

         α = 0.002 / 1 70

         α = 2,857 10⁻⁵ ºC⁻¹

Answer:

a

Explanation:

so the answer is 200N

and I hope it is correct

Answer:

A. There is 100% cloud cover in that area.

Explanation:

Cloud cover is recorded on weather charts by shading in parts of the circle.

If there are no clouds, the circle is left white and if the sky is completely covered in cloud, the circle is shaded completely in which means 100% cloud cover in that area.

Answer:

bc earth rotates

3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P3==D---------- :P

Explanation:

Answer:

The interaction between the solar wind and Earth's magnetic field, and the influence of the underlying atmosphere and ionosphere, creates various regions of fields, plasmas, and currents inside the magnetosphere such as the plasmasphere, the ring current, and radiation belts.

Explanation:

Answer:

True

Explanation:

The force of gravity keeps all of the planets in orbit around the sun

True. The force of gravity keeps all of the planets in orbit around the sun.

The force that pulls items toward the center of a planet or other entity is called gravity. All of the planets are kept in orbit around the sun by gravity.

Gravity applies to everything that has mass. Gravity is stronger for objects with higher mass. Along with distance, gravity weakens as well. Therefore, the gravitational pull of two things becomes stronger the closer they are to one another.

The mass of the Earth is what creates gravity. The combined gravitational force of all of its mass acts on the mass in your body.

Therefore, True. The force of gravity keeps all of the planets in orbit around the sun.

To learn more about gravity, refer to the link:

https://brainly.com/question/4014727

#SPJ2

Answer:

The "butterfly Effect"

Explanation:

The "butterfly effect" will probably have big changes in the future.

Answer: the answer is B

Explanation: 80 is not the same as 150 so it will go the way 150 units of force is pulling.

Answer:

The aswer is D

Explanation:

Answer:

d

Explanation:

cumulus clouds that are tall with a flat top

Answer:

t = 9.52 s

Explanation:

This is an oscillatory motion exercise, in which the angular velocity is

         w = [tex]\sqrt{ \frac{k}{m} }[/tex]

Let's use hooke's law to find the spring constant, let's write the equilibrium equation

        F_e - W = 0

        F_e = W

        k x = m g

        k = [tex]\frac{m g}{x}[/tex]

        k = 0.545 9.8 /0.0356

        k = 150 N / m

now the angular velocity is related to the period

          W = 2π / T

we substitute

          4π² T² = k /m

          T = 4pi² [tex]\sqrt{ \frac{m}{k} }[/tex]

we substitute

           T = 4 pi² [tex]\sqrt{ \frac{0.545}{150} }[/tex]

            T = 2.38 s

therefore for the spring to oscillate 4 complete periods the time is

            t = 4 T

            t = 4 2.38

            t = 9.52 s

Answer:

the induced electric field is 9.95 V/m

Explanation:

Given the data in the question;

Number of turns N = 52

Diameter of coil D = 17 cm = 0.17 m

Radius r = D/2 = 0.17/2 = 0.085 m

Now,

cross-section area A of the coil  = πr²

A = π × ( 0.085 m )²

A = 0.0227 m²

Also given that;

Initial magnetic field B₁ = 0.45 T

Final magnetic field B₂ = 0

∴ change in magnetic field ΔB = B₁ - B₂ = 0.45 T - 0 = 0.45 T

Time taken dT = 0.10 seconds

Now, we know that;

Induced emf ∈ = N[tex](\frac{d\eta }{dt} )[/tex]

where η = BAcosθ

We know that, magnetic field is cylindrically symmetric, coil is also perpendicular to magnetic field.

Hence, the angle between B & A is 0°

∴ θ = 0°

Induced emf ε = N[tex](\frac{d }{dt} )BAcos\theta[/tex]

we substitute

ε = N[tex](\frac{d }{dt} )[/tex] (BAcos0°)

A is constant and cos0° = 1

so

ε = NA[tex](\frac{dB }{dt} )[/tex]  

We now substitute in our values;

ε = 52 × 0.0227 m² ×  [tex](\frac{0.45T }{0.10s} )[/tex]

ε  =  5.3118 V

we know that, from the relation between electric and emf

ε = ∫∈.dl or ε = ∈∫dl         { for coil; ∫dl = πD }

so we have;

ε = ∈πD

solve for ∈

∈ = ε/πD

we substitute

∈ = 5.3118 V / ( π × 0.17 m )

∈ = 9.95 V/m

Therefore, the induced electric field is 9.95 V/m

Answer:

0 J

Explanation:

Work equals force times distance, but the force is zero because the crate being dragged will have zero acceleration. Force equals mass times acceleration and since acceleration is zero, force has to equal zero as well. Since the force is zero, the work required also has to be zero.

Answer:

1.62 m/s²

Explanation:

Answer:

2.75 N

Explanation:

Given that,

Box A has a mass 21.0 kg and box B has a mass 8.0 kg.

A horizontal force of 100N is exerted on box A.

Let a be the acceleration of the system. Using second law of motion,

[tex]F=(m_A+m_B)a\\\\a=\dfrac{F}{(m_A+m_B)}\\\\a=\dfrac{10}{(21+8)}\\\\a=0.344\ m/s^2[/tex]

Now applying Newton's second law to box B. So,

[tex]F_A=m_Ba\\\\=8\times 0.344\\\\=2.75\ N[/tex]

So, 2.75 N is the force that box A exerts on box B.

The key concept here is that when two objects interact, the forces they exert on each other are equal in magnitude but opposite in direction. The magnitude of the force that box A exerts on box B is also 100N.

Newton's third law of motion states that for every action, there is an equal and opposite reaction. It is one of the three fundamental principles described by Sir Isaac Newton in his Laws of Motion.

According to Newton's third law, when an object exerts a force on another object, the second object simultaneously exerts a force of equal magnitude but in the opposite direction on the first object. In simpler terms, if object A applies a force on object B, then object B applies an equal force in the opposite direction on object A.

Since boxes A and B are in contact on a frictionless surface, the force exerted on box A will be transmitted to box B. According to Newton's third law of motion, the magnitude of the force that box A exerts on box B will be equal in magnitude but opposite in direction to the force exerted on box A.

Therefore, the magnitude of the force that box A exerts on box B is also 100N.

For more details regarding Newton's third law of motion, visit:

https://brainly.com/question/29768600

#SPJ6

Answer:

Force,friction,inertia and momentum

Explanation:

The speed that the marble is moving at can be determined by the amount of force used when pushed or pulled and what kind of surface it's on.Momentum is also a factor because of the mass of the marbles.

Answer:

h = 5.38 10¹⁶ m

Explanation:

Let's start this exercise by assuming that all the potential energy of the electron is converted into kinetic energy, let's use the conservation of energy

starting point. Just before ionization

          Em₀ = U = qE

final point. Right after ionization

           Em_f = K = ½ m v²

Energy is conserved

           Em₀ = Em_f

           q E = ½ m v²

           v² = 2qE / m

Now we can use the relationship between net work and kinetic energy

           W_net = ΔK

net work is the work done by the electron minus the binding energy with the atom, called the work function, Ф = 3 10-19 J

           W - Ф = K_f - K₀

we assume that the electron converts all its initial initial kinetic energy to be zero

           W -Ф = ½ m v² - 0

            W = ½ m v² +Ф

we substitute

           W = 1/2 m 2qE/m + E

           W =  qE +Ф

           W = 1.6 10⁻¹⁹ 3 10⁶ + 3 10⁻¹⁹

            W = 4.8 10⁻¹³ + 3 10⁻¹⁹

           W = 4.8 10⁻¹³ J

When the electron is in air, its kinetic energy can be transformed into gravitational potential energy

As the electron is in the air, all work is transformed into scientific energy

           W = K

starting point Em₀ = K = W

end point Em_F = U = m g h

energy conservation Em₀ = Em_f

                       W = m g h

                       h = [tex]\frac{W}{mg}[/tex]

let's calculate

                       h = [tex]\frac{4.8 \ 10^{-13} x}{9.1 \ 10^{-31} \ 9.8 }[/tex]

                       h = 5.38 10¹⁶ m

Electron involved in making in spark travel through the air before it collides with an atom will be at the distance of 5.38 10¹⁶ m.

An electric field is an electric property that is connected with any location in space where a charge exists in any form. The electric force per unit charge is another term for an electric field.

Let's begin this exercise by assuming that all of the electron's potential energy is turned into kinetic energy, and then we'll apply the law of conservation of energy.

Energy before ionization;

[tex]\rm Em_0 = U = qE[/tex]

Energy after ionization;

[tex]Em_f = K = \frac{1}{2} mv^2[/tex]

From the law of conservation of energy principle;

[tex]Em_0 = Em_f \\\\ q E =\frac{1}{2} m v^2\\\\ v^2 = \frac{2qE }{m}[/tex]

The relationship between net work and kinetic energy;

[tex]W_{net} = \triangle K[/tex]

The work function is defined as net work, which is the work done by the electron minus the binding energy with the atom.

[tex]W - \phi = K_f - K_0[/tex]

[tex]W = K_f+ \phi[/tex]

[tex]W = \frac{1}{2} m \times \frac{2qE}{m} + E\\ \\W = qE + \phi \\\\ \rm W = 1.6 \times 10^{-19}\times 3 \tims 10^6 3 10⁶ +3 \times 10^{-19} \\\\ W = 4.8 \times 10^{-13}+ 3 \times 10^{-19}\\\\ W = 4.8 \times 10^{-13} J[/tex]

EMF at starting point;

[tex]\rm Em_0 = K = W[/tex]

EMF at the endpoint;

[tex]\rm Em_F = U = m g h[/tex]

From the law of conservation of energy principle;

[tex]Em_0 = Em_f \\\\ W = m g \\\\ h = \frac{W}{mg}\\\\\ h = \frac{4.8 \timjes 10^{-13}}{9.1 \times 10^{-31} \times 9.81 }\\\\ \rm h= 5.38 \times 10^{16}[/tex]

Hence electron involved in making in spark travel through the air before it collides with an atom will be at a distance of 5.38 10¹⁶ m.

To learn more about the electric field refer to the link;

https://brainly.com/question/26690770

Answer:

Sarah plans to use trickery and cunning to get back at Emma. Sarah thinks she is smarter than Emma.

Explanation:

i think this is right i dont know tho

Answer:

    [tex]\frac{L_1}{L_2} = \sqrt{(n^2 - 1)}[/tex]

Explanation:

For this interesting problem, we use the definition of centripetal acceleration  

      a = v² / r  

angular and linear velocity are related  

     v = w r  

we substitute  

    a = w² r

the rectangular body rotates at an angular velocity w  

We locate the points, unfortunately the diagram is not shown. In this case we have the axis of rotation in a corner, called O, in one of the adjacent corners we call it A and the opposite corner A  

the distance OB = L₂  

the distance AB = L₁

the sides of the rectangle  

It is indicated that the acceleration in in A and B are related  

      [tex]a_A = n \ a_B[/tex]  

we substitute the value of the acceleration  

    w² r_A = n r_B  

the distance from the each corner is  

    r_B = L₂  

    r_A = [tex]\sqrt{L_1^2 + L_2^2}[/tex]  

we substitute  

   \sqrt{L_1^2 + L_2^2} = n L₂  

    L₁² + L₂² = n² L₂²  

    L₁² = (n²-1) L₂²