Answer: C
Explanation:
Convective heat transfer, or convection, is the transfer of heat from one place to another by the movement of fluids, a process that is essentially the transfer of heat via mass transfer.
Which of the following examples of energy transfer CANNOT happen?
A toy car rolling down a hill increases speed and then rolls to a stop.
A bunger jumper jumps from a bridge and goes up higher with each recoil.
A child playing on a swing moves fastest at the bottom of the swing's path.
A rock dropped from the top of a bridge increases in speed until it hits the water.
The energy transfer which cannot be happened is option c , at the bottom of the swing, the kinetic energy gets converted completely into its potential energy thus, it have no speed when it reached the bottom.
What is kinetic energy ?Kinetic energy of a body is generated by virtue of its motion. Kinetic energy increases as its mass and velocity increases. Potential energy of a body is the energy stored on it when it comes to rest.
When an object is falling freely to the ground its kinetic energy is converting to the potential energy up to the point it reaches the ground. When it touches the ground, the kinetic energy converts back to potential energy.
Therefore, when the child in the swing comes down from a height its speed is increasing and have greater kinetic energy but this is converted to potential energy when it reach the bottom. Hence no speed it have at the bottom.
Find more on kinetic energy:
https://brainly.com/question/26472013
#SPJ6
quit my nose so you have a bad guy really good guy
Answer:
hmmmmmmmmmmmmmmm
yes.
Waves are often caused by
a
vibrating objects.
b
colliding objects.
c
potential energy.
d
mechanical energy.
Answer:
vibrating objects.
I think
Waves are often caused by vibrating objects. Based on the type of vibrational motion, there are different types of waves. Hence, option a is correct.
What are waves ?Waves are disturbances in air or the passage of energy through vacuum or through a medium. Waves are caused by vibration of objects. Three are two types of waves broadly, mechanical waves and electromagnetic waves.
Electromagnetic waves are those associated with combined electric and magnetic field. They can pass through both vacuum and mediums. Mechanical waves need a medium to pass and does not transfer through vacuum.
Based on the vibrational motion, there are two types of waves longitudinal waves and transverse waves. In transverse waves, the vibrational motion of particles is perpendicular to the wave propagation.
In the case of transverse waves, the particle vibration is along the wave propagation. Hence, option A is correct.
Find more on waves:
https://brainly.com/question/3639648
#SPJ2
I think it’s b but I’m not sure
Answer: B
Explanation: Yes it is b, because the lightbulb won’t matter just the circuit and flow of the cable.
HELP ASAP!!!! WILL GIVE BRAINLIEST!
What is the function of mitochondria?
Answer:
The mitochondria is a cell organelle that provides energy for the cells.
Explanation:
A cell can be defined as the fundamental or basic functional, structural and smallest unit of life for all living organisms. Some living organisms are unicellular while others are multicellular in nature.
A unicellular organism refers to a living organism that possess a single-cell while a multicellular organism has many (multiple) cells.
All living organisms such as plants and animals require energy to function properly (life activities). Thus, the organelle where energy from nutrients is released is generally referred to as mitochondria.
Animals retrieve energy using mitochondria to do cellular respiration because they typically act like a digestive system by taking in nutrients, breaking them down and obtaining energy rich molecules for cell-life activities.
Basically, mitochondria is one of the cell organelles found in all living organisms and it is known as the powerhouse. Therefore, mitochondria provides all the energy required in the cell by transforming energy forms through series of chemical reactions; breaking down of glucose into Adenosine Triphosphate (ATP) used for providing energy for cellular activities in the body of living organisms.
what is the uses of space weather data?
Answer:
Space Weather Data
They are used to produce forecasts, such as the monthly sunspot number forecast. Most notably, sunspot numbers represent one of the longest continuous climate records available. The data give scientists the means to make many forecasts and issue space weather advisories and alerts.
Explanation:
a TV set is pushed a distance of 2 m with a force of 20 N how much work is done on the set
Answer:
40 J
Explanation:
Indica en cada caso si estas fuerzas producen un efecto deformador o dinámico: a) Empujar un carro de la compra c) Atraer mediante un imán un clavo que estaba en reposo b) Modelar una figura de arcilla d) Lanzar una pelota de tenis
Answer:
Dynamic a, b and d
Deformer c and d
Explanation:
When a force is applied to an object, the acceleration may or may not change, which is analyzed from Newton's second law, this effect is a dynamic effect on the system; The environment can change the shape of the object, in this case the force creates a deformation in it.
With these clarifications let's analyze the different situations.
a) Dynamic. When pushing a car initially an acceleration is created in it, shortly after this decreases to zero and continues with constant speed.
b) Dynamic. When the nail moves it does not change the shape of the body that contains it, nor the shape itself, therefore the system can be analyzed with Newton's second law and the force is of the Dynamic type
c) Deformer. In this case the body (clay) has no net movement, but it does change its shape, so the effect of the force translates into a deformation of the system
d) Deformar and Dynamic. The launch of tennis balls has an initial deformation stage during the acceleration process, in this part the force is of the DEFORMING type, but during the trajectory the deformation disappears and the ball has (gravity) a DYNAMIC action
how much steam must be passed into a mixture of ice and water in order to melt 10 g of ice?
Answer:
about 1.48 grams
Explanation: None
What is the most widely accepted theory as to how our Universe formed?
What is asexual reproduction?
List the various and describe four types of asexual reproduction.
What is sexual reproduction?
Why is sexual reproduction beneficial?
Answer:
there are a number of types of asexual reproduction including fission, fragmentation, budding, vegetative reproduction, spore formation and gamogenesis. Spore formation occurs in plants, and some algae and fungi, and will be discussed in additional concepts
the production of new living organisms by combining genetic information from two individuals of different types (sexes). In most higher organisms, one sex (male) produces a small motile gamete which travels to fuse with a larger stationary gamete produced by the other (female)
The advantages of sexual reproduction: produces genetic variation in the offspring. the species can adapt to new environments due to variation, which gives them a survival advantage. a disease is less likely to affect all the individuals in a population.
Explanation:
How do the summer monsoons of India affect the hydrosphere, geosphere, and biosphere?
Answer:
Explanation:
The monsoon rains are the main source of water for 55 percent of the country’s arable land. This means the rains are crucial — not only for India’s farmers, but for its economy as a whole. Now, that’s a good thing when the monsoon arrives on time and brings the right amount of rain. But when it’s late or weak, it leads to drought.
A 57.0 kg person in a
rollercoaster moving through
the bottom of a curved track of radius
42.7 m feels a normal force of 995 N.
How fast is the car moving?
Answer:
The linear speed of the car is approximately 27.30 m/s
Explanation:
The question parameters are;
The mass of the person on the rollercoaster, m = 57.0 kg
The radius of the rollercoaster track, r = 42.7 m
The normal force felt by the person, F = 995 N
The centripetal force acting on the person keep the circular motion is given by the following equation;
[tex]Centripetal \, force \ F_c = \dfrac{m \times v^2}{r}[/tex]
Where;
v = The linear velocity of motion = The linear speed of the car
The centrifugal force, F, is the force normal force felt by the person and is equal to the centripetal force, therefore, we have;
[tex]Centripetal \, force \ F_c = Centrifugal \, force \ F = \dfrac{m \times v^2}{r}[/tex]
From which we have;
[tex]F = 995 = \dfrac{57 \times v^2}{42.7}[/tex]
[tex]\therefore v = \sqrt{\dfrac{995 \times 42.7}{57} } \approx 745.38[/tex]
The linear speed of the car = v ≈ 27.30 m/s
The angular speed of the car, ω = v/r ≈ 27.30/42.7 ≈ 0.639 rad/s
Answer: 18.1 m/s
Explanation:
1. A race starts out at rest and accelerates to 30m/s over a period of 10s. What is the acceleration of the car?
O 3.0 m/s
O 3.0 m.s2
O 2.0 m/s2
O 5.0 m/s2
Answer:3.0m/s
Explanation:
A resistance of a wire has a value or (r) Ohms. The wire is stretched to double its length, then, its resistance in Ohms is:
A ball is released out a window that is 13 m above the ground. How fast will the ball be traveling when it reaches the ground?
A. 32 m/s
B. 0.26 km/s
C. 0 m/s
D. 16 m/s
Answer:
Option D. 16 m/s
Explanation:
From the question given above, the following data were obtained:
Initial velocity (u) = 0 m/s
Height (h) = 13 m
Acceleration due to gravity (g) = 9.8 m/s²
Final velocity (v) =?
We can determine how fast (i.e final velocity) the ball is traveling when it reaches the ground as illustrated below:
v² = u² – 2gh
v² = 0² – (2 × 9.8 × 13)
v² = 0 – 254.8
v² = 254.8
Take the square root of both side.
v = √254.8
v = 15.96
v ≈ 16 m/s
Thus, the ball is travelling with a velocity of 16 m/s when it reaches the ground
what does PE + KE = __
Answer:
Energy that is dependant on height is called gravitational potential energy.
The formula for potential energy is:
G.P.E.=mgh
Weight (mass x gravity) determines the amount of potential energy.
Is there potential energy in the 5 forms of energy?
Yes, potential energy can be found in fossil fuels, within the foods you eat, and the batteries that you use.
Conservation of Energy:
It is important to understand that each form of energy does not exist separately but undergoes change from one to another without a net loss in energy. Consider this example:
As a projectile is launched into the air KE is at its maximum. As the projectile gains altitude PE becomes greater than KE. At the top of its arc, PE is at its maximum. The whole cycle reverses itself on the way down.
As you can see, the loss in KE is a gain in PE. Energy is not lost but conserved.
Law of conservation of energy.
Energy cannot be created nor destroyed. It can be transformed from one form to another, but the total amount of energy never changes.
A 50 kg circus worker stands on a merry go round platform. If the worker's acceleration is 2.5 m/s2, what is her centripetal force?
F = ma
= 50kg × 2.5 m/s²
= 125 N
Answer : 125N
Explanation :
F = Force (N)
m = mass (kg)
a = acceleration (m/s²)
Studying energy involves determining the amount of energy an object has. This energy can be kinetic or potential, or it could be a combination of both. Consider a 2-kg bowling ball sits on top of a building that is 40 meters tall. It falls toward the ground. Think about the amounts kinetic energy the bowling ball has as it falls, select the when the ball would have the most kinetic energy from the choices given.
Answer: the answer is a
Explanation: I got it correct on test
Answer:
as it is halfway through the fall and it has reached a speed of 19.8 meters per second
Explanation:
Studying energy involves determining the amount of energy an object has. This energy can be kinetic or potential, or it could be a combination of both. Consider a 2-kg bowling ball sits on top of a building that is 40 meters tall. It falls toward the ground. Think about the amounts kinetic energy the bowling ball has as it falls, select the when the ball would have the most kinetic energy from the choices given.
Which of the following is true about the mass of an object?
O It is equal to its weight.
O It is proportional to its weight.
O it is always more than its weight.
Olt changes at different locations
If you launch an object in space, it
will continue to move forward
until an external force stops it.
This is a characteristic of which
law?
Answer:
I believe this represents Newton's first law of motion. Any object in motion will continue to move until a force stops it, be it friction or a physical object.
what is the function of brushes in D.C motor
Answer:
to transfer the voltage
Explanation:
The brushes make physical contact with the commutator. When a DC voltage is applied to the brushes, that voltage is transferred into the commutator which, in turn, powers the windings. This electrical input generates a magnetic field around the armature.
HELPPP MEE!!
A mover slides a refrigerator weighing 650 N at a constant velocity across the floor a distance of 8.1 m. The force of friction between the refrigerator and the floor is 230
N. Calculate the coefficient of friction between the floor & refrigerator.
Answer: The coefficient of friction is 0.35
Explanation:
We can write the friction force as:
F = N*μ
Where N is the normal force between the refrigerator and the ground, as the full weight of the refrigerator is acting on the ground, the normal force will be exactly equal to the weight of the refrigerator, then:
N = 650N
And μ is the coefficient of friction.
And for this case, the force is 230N, then we have:
F = N*μ
230N = 650N*μ
(230N/650N) = μ = 0.35
Notice that the distance did not matter for this calculation.
Why is a teacher's feedback valuable?
Answer:
Because they could help you move on better with your strategy and ultimately get you better scores on tests
Answer:
Through feedback, teachers can provide the students with suggestions for development, learning strategies and corrections for errors. The importance of constructive feedback allows for many positive opportunities. This component also enhances a student's self-efficacy and provides an avenue for motivation.
Alkali metals _____.
A. only react with other metals in Group 1
B. react with other elements by losing one electron
C. react with other elements by gaining one electron
D. do not react with other elements under normal conditions
WILL MARK BRAINLY!! QUICK HELP PLEASE!
A 40.0 kg rocket produces a
764 N upwards force ("thrust").
What is the net force acting on
the rocket?
Answer:
372Explanation:(40.0)×(9.8)=392
764N-392=372
water is not used as thermometric liquid.why?
Answer:
Water cannot be used in thermometer because of its higher freezing point and lower boiling point than other liquids . If water is used in a thermometer , it will start phase change at 0[tex]degree\\[/tex]C and 100[tex]degree[/tex]C and will not measure temperature , out of this range . This range is very small as compared to other liquids as mercury , having freezing point about −39[tex]degree[/tex]C and boiling point 356[tex]degree[/tex]C.
Explanation:
If an arrow is fired from a bow with a perfectly horizontal velocity of 60.0 m/s and the arrow had a vertical velocity of 6m/s just before it hit the ground, how long will it take to strike the ground ?
Answer:
t = 1,28 s
Explanation: This problem is a projectile motion problem.
V₀ₓ = V₀ * cosθ
Vₓ = constant all the way
Vₓ = V₀ₓ
tanθ = Vyi/Vxi that means in any point of the trajectory
tanθ = 6 / 60 ( just before touching the ground )
tanθ = 0,1 then arctan 0,1 ≈ 6⁰
sin 6⁰ = 0,1045
cos 6⁰ = 0,9945
V₀ₓ = V₀ * cosθ ⇒ V₀ = V₀ₓ / cosθ ⇒ V₀ = 60 / 0,9945
V₀ = 60,33 m/s
V₀y = V₀ * sin θ ⇒ V₀y = 60,33 * 0,1045 ⇒ V₀y = 6,30 m/s
Vy = V₀y - g * t
At maximum y Vy = 0 ( the middle of the trajectory)
g*tm = V₀y ⇒ tm= V₀y / g
tm = 6,30 / 9,8
tm = 0,64 s ( time to reach maximum y )
Then the time of fligh is twice 0,64 s
t = 0,64 * 2
t = 1,28 s
For an object to have potential energy it must be...?
A) At rest
B) Light weight
C) Moving
D) Elevated (height)
Please I need help, thank you!
Calculate the mass of a planet that exerts a 1.5 X 10 13 N force on a 5.4 x 10
30
kg star
O 6.67 X 10 3 kg
O 1.07 X 10 15 kg
O 1.00 X 10 17 kg
O 1.30 X 10 45 kg
Answer:
umm I also need help sorry
Explanation:
help..
Answer:
1.07 X 10^15 kg
Explanation: