Think up and write down a small number of queries for a web search engine.

Make sure that the queries vary in length (i.e., they are not all one word). Try

to specify exactly what information you are looking for in some of the queries.

Run these queries on two commercial web search engines and compare the top

10 results for each query by doing relevance judgments. Write a report that answers at least the following questions: What is the precision of the results? What

is the overlap between the results for the two search engines? Is one search engine

clearly better than the other? If so, by how much? How do short queries perform

compared to long queries?​

Answer:

You need an AND gate and an OR gate.

Explanation:

see picture below

Answer: Portability

Explanation: I hope it helps you!

Two problems that can lead to the development of encapsulation constructs when creating large programs are the complexity of data and the lack of security in sensitive data.

We can arrive at this answer because:

Although there are other ways to accomplish these goals, encapsulation constructs are widely used because of their simplicity and efficiency.

More information:

https://brainly.com/question/13438419

Answer:

uuuuu

Explanation:

Answer:

57677748957394209690369-34064666

Explanation:

Answer:

If they all have the same answer it is true, but if they are all different check with trusted sources

Explanation:

Answer:

because other people you dont know can see it and it can sometimes not be good

Explanation:

Answer:

Microsoft (the word being a portmanteau of "microcomputer software") was founded by Bill Gates and Paul Allen on April 4, 1975, to develop and sell BASIC interpreters for the Altair 8800. It rose to dominate the personal computer operating system market with MS-DOS in the mid-1980s, followed by Microsoft Windows

Explanation:

if you need full answer this is it

When a turtle object attempts to move beyond a window boundary, the turtle object stops because it cannot move outside the window boundary.

The turtle graphics window is simply a graphics window that is used as a playground when drawing turtles.

A turtle object is always in the turtle graphics window.

This in other words mean that, the turtle object cannot exceed the boundaries of the turtle graphics window

An attempt to move the turtle object outside its window will stop the turtle object;

This is so because the turtle object is always in the turtle graphic window, and it cannot move beyond it.

Read more about turtle graphics window at:

https://brainly.com/question/3070883

Answer:

The explanation is for 10 inputs though. You'd have to follow these steps to find input 50 numbers.

Explanation:

This is how I wrote it in the Plain English programming language which looks like pseudo-code but compiles and runs (to save you all the rest of the steps):

To run:

Start up.

Write "Enter 10 numbers separated by spaces: " on the console.

Read a reply from the console.

Loop.

If the reply is blank, break.

Get a number from the reply.

Add 1 to a count.

Add the number to a total.

Repeat.

Write "The total is: " then the total on the console.

Put the total divided by the count into an average.

Write "The average is: " then the average on the console.

Refresh the screen.

Wait for the escape key.

Shut down.

There are various ways to resolve conflict. Addressing conflict by the  team manage is by:

There are a lot of ways an individual can handle conflict. One of which is to expand the resource base.

Example: Supporting  team manager receives 4 budget requests for $150,000 each. If he has only $200,000 to distribute, there will be conflict at this stage because each group will believe its proposal is worth funding and will not be happy if not fully funded. So the best thing to do is to expand the resources allocated.

The right way to fix this conflict is to tell your volunteers in advance that some of them will not be doing different tasks etc.

See full question below

Learn more from

https://brainly.com/question/18103914

Answer:

Computers are dull: The CPU is the Central Processing Unit or the brains of the computer. The CPU knows what to do with machine language instructions. It doesn't understand them; it just knows what to do with them.

Explanation:

Hope I could help.

                                 please mark as brainliest

This is the requested code in java.

public class CharTest {

   public static String checkCharacter(String text, int index) {

       if (0 <= index && index <= text.length()) {

           char ch = text.charAt(index);

           if (Character.isLetter(ch)) {

               return ch + " is a letter";

           } else if (Character.isDigit(ch)) {

               return ch + " is a digit";

           } else if (Character.isWhitespace(ch)) {

               return ch + " is a whitespace character";

           } else {

               return ch + " is an unknown type of character";

           }

       } else {

           return "index " + index.toString() + " is out of range";

       } // end if

   } // end function checkChar()

   public static void main(String[] args) {

       // Test the three samples from the specification.

       System.out.println(checkCharacter("happy birthday", 2));

       System.out.println(checkCharacter("happy birthday", 5));

       System.out.println(checkCharacter("happy birthday 2 you", 15));

   } // end function main()

} // end class CharTest

The function checkcharacter(text, index) returns a string value describing the kind of character found at the position in text specified by index; whether it was a letter, digit, whitespace, or an unknown kind of character.

How it does that is to make use of respective functions defined within the Character class in java. That is

It calls these functions in an if statement. These else part of the if statement is then executed if the character is neither a letter, digit, or whitespace.

Finally, the function main() calls checkCharacter() three times to test the function and return the results to the console.

Another example of a java program on characters is found in the link below

https://brainly.com/question/15061607

Answer:#include<iostream>

using namespace std;

int main() {

int var1, var2;

char operation;

cout << "Enter the first number : ";

cin >> var1;

cout << endl;

cout <<"Enter the operation to be perfomed : ";

cin >> operation;

cout << endl;

cout << "Enter the second nuber : ";

cin >> var2;

cout << endl;

bool right_input = false;

if (operation == '+') {

cout << var1 << " " << operation << " " << var2 << " = " << (var1 + var2);

right_input = true;

}

if (operation == '-') {

cout << var1 << " " << operation << " " << var2 << " = " << (var1 - var2);

right_input = true;

}

if (operation == '*') {

cout << var1 << " " << operation << " " << var2 << " = " << (var1 * var2);

right_input = true;

}

if (operation == '/' && var2 != 0) {

cout << var1 << " " << operation << " " << var2 << " = " << (var1 - var2);

right_input = true;

}

if (operation == '/' && var2 == 0) {

cout << "Error. Division by zero.";

right_input = true;

}

if (!right_input) {

cout << var1 << " " << operation << " " << var2 << " = " << "Error;";

cout << "Invalid Operation!";

}

cout << endl;

system("pause");

return 0;

}

Explanation:

Answer:

While statements determine whether a statement is true or false. If what’s stated is true, then the program runs the statement and returns to the first step. If what’s stated is false, the program exits the while and goes to the next statement. An added step to while statements is turning them into continuous loops. If you don’t change the value so that the condition is never false, the while statement becomes an infinite loop.

If statements are the simplest form of conditional statements, statements that allow us to check conditions and change behavior/output accordingly. The part of the statement following the if is called the condition. If the condition is true, the instruction in the statement runs. If the condition is not true, it does not. The if statements are also compound statements. They have a header (if x) followed by an indented statement (an instruction to be followed is x is true). There is no limit to the number of these indented statements, but there must be at least one.

Answer:

f*(i,z) = log pxz

Explanation:

they round

Answer:

How to Set Up a Home Network- Beginners Guide

Today almost every home and small office has a local network, and an Internet connection.

The home network or small area network enables multiple devices e.g. PCs,tablets etc to connect to each other, and also to connect to the internet.

In this tutorial you will learn how you to build and setup a home or small area network and connect it to the Internet.

Explanation:

Choosing a Wired or Wireless Network

Do You Build a wired or Wireless Network? which is best?

Early (pre 2008) home networks were predominately wired networks.

Wired networks use Ethernet over UTP cable and tend to be faster than wireless networks, which is an important consideration if you are a gamer. The simple wired home network diagram below shows a minimum setup with a switch and broadband router.



Wired Network Advantages

Fast typically 100 Mbps to 10 Gbps

Secure and reliable.

Wired Network Dis-Advantages

Doesn’t work with devices that don’t have an Ethernet port e.g. tablets and smart phones.

Not so easy and fast to setup as it requires running cables. However Homeplug or powerline adapters can be used instead.

Not so easy for visitors and mobile devices (laptops) to connect to.

Main Uses

It Is best used for network backbone i.e. connecting between router,network switches and wireless access points on different levels (floors).

Answer:

Sorry im not Vietnam so please explain it in English or ask someone who can speak Vietnam to help you

In this scenario, the option which Ruzwana should use to ensure that the various devices meet organizational standards and for the deployment of various universal applications is: d. An answer file

An answer file can be defined as an XML-based file which contains the configuration settings and values that should be used during the installation of a software program on one or more devices in accordance with specific standards. Thus, each and every device using the same answer file would have the same configuration setting.

Additionally, an answer file allows a system administrator to automatically deploy various software programs such as meeting software and productivity software to a particular system or network.

In this context, the most appropriate option which Ruzwana should use to ensure that the various devices meet organizational standards and for the deployment of various universal applications is an answer file.

Read more on software here: https://brainly.com/question/25703767

Answer:

c

Explanation:

Answer:

Explanation:

:D

The answer to your question is Developer.

Answer:

Explanation:

An IP address is a 32-bit number. It uniquely identifies a host (computer or other device, such as a printer or router) on a TCP/IP network.

IP addresses are normally expressed in dotted-decimal format, with four numbers separated by periods, such as 192.168.123.132. To understand how subnet masks are used to distinguish between hosts, networks, and subnetworks, examine an IP address in binary notation.

For example, the dotted-decimal IP address 192.168.123.132 is (in binary notation) the 32-bit number 110000000101000111101110000100. This number may be hard to make sense of, so divide it into four parts of eight binary digits.

These 8-bit sections are known as octets. The example IP address, then, becomes 11000000.10101000.01111011.10000100. This number only makes a little more sense, so for most uses, convert the binary address into dotted-decimal format (192.168.123.132). The decimal numbers separated by periods are the octets converted from binary to decimal notation.

For a TCP/IP wide area network (WAN) to work efficiently as a collection of networks, the routers that pass packets of data between networks don't know the exact location of a host for which a packet of information is destined. Routers only know what network the host is a member of and use information stored in their route table to determine how to get the packet to the destination host's network. After the packet is delivered to the destination's network, the packet is delivered to the appropriate host.

For this process to work, an IP address has two parts. The first part of an IP address is used as a network address, the last part as a host address. If you take the example 192.168.123.132 and divide it into these two parts, you get 192.168.123. Network .132 Host or 192.168.123.0 - network address. 0.0.0.132 - host address.

The second item, which is required for TCP/IP to work, is the subnet mask. The subnet mask is used by the TCP/IP protocol to determine whether a host is on the local subnet or on a remote network.

In TCP/IP, the parts of the IP address that are used as the network and host addresses aren't fixed. Unless you have more information, the network and host addresses above can't be determined. This information is supplied in another 32-bit number called a subnet mask. The subnet mask is 255.255.255.0 in this example. It isn't obvious what this number means unless you know 255 in binary notation equals 11111111. So, the subnet mask is 11111111.11111111.11111111.00000000.

Lining up the IP address and the subnet mask together, the network, and host portions of the address can be separated:

11000000.10101000.01111011.10000100 - IP address (192.168.123.132)

11111111.11111111.11111111.00000000 - Subnet mask (255.255.255.0)

The first 24 bits (the number of ones in the subnet mask) are identified as the network address. The last 8 bits (the number of remaining zeros in the subnet mask) are identified as the host address. It gives you the following addresses:

11000000.10101000.01111011.00000000 - Network address (192.168.123.0)

00000000.00000000.00000000.10000100 - Host address (000.000.000.132)

So now you know, for this example using a 255.255.255.0 subnet mask, that the network ID is 192.168.123.0, and the host address is 0.0.0.132. When a packet arrives on the 192.168.123.0 subnet (from the local subnet or a remote network), and it has a destination address of 192.168.123.132, your computer will receive it from the network and process it.

Almost all decimal subnet masks convert to binary numbers that are all ones on the left and all zeros on the right. Some other common subnet masks are:

Decimal Binary 255.255.255.192 1111111.11111111.1111111.11000000 255.255.255.224 1111111.11111111.1111111.11100000

Internet RFC 1878 (available from InterNIC-Public Information Regarding Internet Domain Name Registration Services) describes the valid subnets and subnet masks that can be used on TCP/IP networks.

Hope this helps!

Answer:

who is Big chungus???

Believe in Lord Buddha !

Answer:

a

Explanation:

The correct options are A, C, and D. Front Size, Italic, and Underline are the options can you use to format the contents of a cell.

You can also use the keyboard shortcuts Ctrl+B, Ctrl+I, and Ctrl+U to bold, italicize and underline a selection of text.

You can only alter how cell data appears in the spreadsheet by using cell formats. It's critical to remember that the data's value is unaffected; only how the data is presented has changed. The formatting options include options for fractions, dates, timings, scientific alternatives, and more.

Regular, Bold, Italic and Bold Italic are the four different sorts of font styles. Selected cells or ranges in a worksheet can have their font style changed. Changing the typeface involves the following steps: Pick the cell or cells that need to be changed. The text you want to format should be selected. Go to the Home tab and select Bold, Italic, or Underline. Ctrl + B will bold text. Ctrl + I will italicize text.

Thus, the correct options are A, C, and D.

Learn more about Format cell here:

https://brainly.com/question/24139670

#SPJ2

Answer:

B

Explanation:

They have offices in Redmond Washington

Answer:

A HTML file has headers and a "body" (payload) — just like a HTTP request. The <body> encapsulates the contents of the document, while the <head> part contains meta elements, i.e., information about the contents. This is (typically) title, encoding, author, styling etc.

Explanation:

CAN I GET BRAINLIEST

Answer: The answers (in order) are

Insert

Text Box

Draw Text Box

Explanation: Just took the test on edgen, November 2021.

Answer:

Cyber security is a very important aspect of digital world. Without cyber security our sensitive data is at risk. Its very important that companies keep our system safe by spotting any security vunerabilities. SO ACORDING TO ME I DO NOT THINK THEY SHOULD BE ABLE TO POST THEIR FINDINGS ON THE INTERNET As it may contain viruses

Answer:

The algorithm constructs are sequence, decision/selection and repetition.

Explanation:

The three algorithm constructs in C are?

There are known to be 3 basic constructs in an algorithm. They are:

Note that  an algorithm is a combination of instructions for handling a problem or fulfilling a task.

Learn more about algorithm from

https://brainly.com/question/24953880

#SPJ2