The sag in the tensioned cable depends on the weight of the cable and
the applied tension.
The clearance midway between the support is approximately 29.34 metersReasons:
The given parameters are;
Height of the towers are; h₁ = 40 m and h₂ = 30 m
Horizontal distance between the towers, l = 300 m
The tension in the conductor, T = 1,590 kg
Weight of the conductor, w = 0.8 kg/m
Required:
The clearance space of the conductor mid-way between the support
Solution:
The distance, x₁, to the lowest point on the conductor, from the tower, h₁, is given by the formula;
[tex]\displaystyle x_1 = \mathbf{ \frac{l}{2} -\frac{T \cdot h}{w \cdot l}}[/tex]
Where;
h = h₂ - h₁ = 40 m - 30 m = 10 m
Which gives;
[tex]\displaystyle x_1 = \frac{300}{2} -\frac{1590 \times 10}{0.8 \times 300} = \mathbf{83.75}[/tex]
The sag at the lowest point is give by the formula;
[tex]\displaystyle d_1 = \mathbf{ \frac{W \cdot x_1^2}{2 \cdot T}}[/tex]
Therefore;
[tex]\displaystyle d_1 = \frac{0.8 \times 83.75^2}{2 \times 1590} = \frac{4489}{2544} \approx 1.765[/tex]
The lowest point sag, s₁ = 30 m - 1.765 m = 28.235 m
The distance of the midpoint from the lowest point, x, is therefore;
[tex]\displaystyle x = \frac{l}{2} - x_1 = \frac{300}{2} - 83.75 = \mathbf{ 66.25}[/tex]
Which gives;
[tex]\displaystyle d_x = \frac{0.8 \times 66.25^2}{2 \times 1590} = \frac{53}{48} \approx 1.104[/tex]
The clearance midway between the support ≈ 28.235 + 1.104 ≈ 29.34
The clearance midway between the support ≈ 29.34 m
Learn more about overhead lines sag calculations here:
https://brainly.com/question/14210921
PLEASE HELP!!
Identify how each machine changes the way work is done so as to
be useful.
Bicycle
Ax blade
Car jack
When you pedal a bike with chains attached to it, the wheel spins as you exert force from your body into the pedaling. The chains are connected to an almost circular shape.
How machine changes the way of work?Contrary to popular assumption, using machines does not result in more work being done. They merely alter the method of operation. Machines make work easier by increasing the amount of force used, extending the distance over which the force is exerted, or changing the direction of the force.
Simple machines are helpful because they lessen effort or enable humans to execute things that would normally be beyond their capacity. The wheel and axle, pulley, inclined plane, screw, wedge, and lever are examples of simple devices that are frequently employed.
To learn more about machine changes the way of work refer to:
https://brainly.com/question/902575
#SPJ2
Tiny mass of 67kg and tubby mass of 83 kg are now on the opposite ends of a see saw and are both 1.4m from the balance point where should their sister teeny whose mass is 32 kg sit so the see saw balances
Answer:
0.7 m between the balance point and Tiny
Explanation:
It's intuitive to say she sould be on the side the smaller mass is placed. How far from the balance point?
Let's call x that distance. and assume that the contraption is "oriented" so that being on the side with tiny (and teeny) gives you a positive distance from the balance point, and negative on the other side.
At equilibrium, the sum of all momentums (momenta?) will be zero:
[tex]67\times 1.4 +32\times x + 83 \times (-1.4) = 0\\32x -16(1.4) = 0 \rightarrow 2x=1.4 x= 0.7[/tex]
In layman's term, she has to be halfway between the balance point and Tiny.
A potted plant falls from the window of an apartment building. It falls for 2.0 s and then hits the ground. What is the speed of the plant just before it hits the
ground? Assume only gravity is acting on it.
A) 20m/s
B)9.8m/s
C)2.0m/s
D)4.9m/s
Answer:
D) 4.9 m/s
Explanation:
Speed of Object in Free Fall
s = Rate of Acceleration, Due to Gravity × Length of Time
s = 9.8 × 2.0
s = m/s (Round Up to The Nearest Whole Number)
--
m/s = 9.8 ÷ 2.0 = 4.9 m/s
The high energy yields created by nuclear fission are due to
A. Binding nuclei
B. Chain reactions
C. Hydrogen bonding
D. Secondary recovery
Answer:
Nuclear fission of heavy elements produces exploitable energy because the specific binding energy (binding energy per mass) of intermediate-mass nuclei with atomic numbers and atomic masses.
Explanation:
have a great day!! :)
Which type of forces creates contact between surfaces?
Answer:
Frictional Force: Frictional force is the force caused by the relative motion of two surfaces that come into contact with each other.
Evidence of liquid water in mars' distant past suggests that it had a substantial atmosphere compared to what it has presently. What happened to its water vapor?.
Answer:
The atmosphere has frozen out into the polar ice caps and permafrost as Mars has cooled.
Explanation: Good luck box BrokenTag27
Na + KCL -> K + NaCI reaction type
Explanation:
it is a displacement reaction.
how do i do this question in science?
simple subtract and ummmmmm.....
How to find average velocity on a graph.
Answer:
Answer is below….
Explanation:
The velocity is represented by the slope of a position-time graph. The faster the motion changes, the steeper the slope. The change in position divided by the corresponding change in time may be used to compute average velocity from a position-time graph.
_________________________________________________________
(hope this helps can I pls have brainlist (crown)☺️
Hello guys! Can you please help me with physics. I translated it in English. Can yall help me please how much you can!!
A body 60 m above the ground shall be thrown vertically upwards at an initial speed of 20 m / s. Air resistance can be ignored!
1. How high will the body fly from the point of ejection?
2. What is the maximum height it will reach above the ground?
3. How long does it take for the body to reach its highest point from the moment of expulsion?
4. After how long after the expulsion will the body fall to the ground?
5. What is the speed of the body at the moment of falling to the ground?
Answer:
1. 60m
4. its speed is 20m/s . gravity is 10m/s . 20 ÷ 10 = 2 seconds after these 2 sec are over the velocity will be zero thus it would have fallen.
Explanation:
Am sorry these is what i could answer but i will try to research and get answers for the rest of the questions, hope this helps
What is Kepler’s first law?
Answer:
Kepler's First Law: each planet's orbit about the Sun is an ellipse. The Sun's center is always located at one focus of the orbital ellipse. The Sun is at one focus. The planet follows the ellipse in its orbit, meaning that the planet to Sun distance is constantly changing as the planet goes around its orbit.
Answer:
Explanation:
Kepler 's first law - sometimes referred to as the law of ellipses - explains that planets are orbiting the sun in a path described as an ellipse. An ellipse can easily be constructed using a pencil, two tacks, a string, a sheet of paper and a piece of cardboard. Tack the sheet of paper to the cardboard using the two tacks.
Saima travels 2.5 km in 21.2 seconds. What as Saima's initial speed if her final velocity is 10.7 m/s?
Answer:
d/t = (230 km)/(3.25 h) = 70.8 km/h.
Explanation:
describe an experiment that can be used to determine the resistance of a metallic conductor
Answer:
resistance of the metal conductor at different temperature
Explanation:
An experiment used to determine the resistance of a metallic conductor is the resistance of a metallic conductor at different temperatures.
What is Resistance?Resistance is the property of a conductor to oppose the flow of charges through it which is numerically given as the ratio of the potential difference across its length to the current flowing through it.
Resistance of a metallic conductor is the measure of its opposition to the flow of electric current. Resistance is known to be directly proportional to the temperature which means as the temperature is increased, its resistance increases too and vice versa.
Resistance has an inverse relationship with the cross sectional area of a metallic conductor, so if the resistance increases the cross sectional area decreases and vice versa.
Thus, an experiment used to determine the resistance of a metallic conductor is the resistance of a metallic conductor at different temperatures.
Learn more about Resistance, here:
https://brainly.com/question/15742150
#SPJ2
A negative charge is paced in an electric field that points west. What direction is the force on the negative particle?
Answer:
A positive charge placed in an electric field will tend to move in the direction of the electric field lines and a negative charge will tend to move opposite to the direction of the electric field lines.
One way to remember this is that there is one velocity, and so the thumb represents it. There are many field lines, and so the fingers represent them. The force is in the direction you would push with your palm. The force on a negative charge is in exactly the opposite direction to that on a positive charge.
Explanation:
Answer:
The force of the negative particle direction is East.
A 0.04 kg honeybee circles a field looking for a flower upon which to land. The radius of the circle she travels is 2.5 m and it takes her 1.57 s to complete the circle.
Find the following:
a) Tangential Velocity
b) Centripetal Acceleration
c) Centripetal Force.
For the honeybee that circles a field looking for a flower upon which to land, we have:
a) The tangential velocity is 10.01 m/s.
b) The centripetal acceleration is 40.1 m/s².
c) The centripetal force is 1.60 N.
a) The tangential velocity can be calculated as follows:
[tex] v = \omega r = \frac{2\pi r}{T} [/tex] (1)
Where:
r: is the radius of the circle = 2.5 m
ω: is the angular velocity = 2π/T
T: is the period = 1.57 s
By entering the above values into equation (1), we have:
[tex] v = \frac{2\pi r}{T} = \frac{2\pi 2.5 m}{1.57 s} = 10.01 m/s [/tex]
Hence, the tangential velocity is 10.01 m/s.
b) The centripetal acceleration is related to the tangential velocity as follows:
[tex] a_{c} = \frac{v^{2}}{r} = \frac{(10.01 m/s)^{2}}{2.5 m} = 40.1 m/s^{2} [/tex]
Therefore, the centripetal acceleration is 40.1 m/s².
c) The centripetal force is given by:
[tex] F = ma_{c} [/tex]
Where:
m: is the honeybee's mass = 0.04 kg
[tex] F = ma_{c} = 0.04 kg*40.1 m/s^{2} = 1.60 N [/tex]
Hence, the centripetal force is 1.60 N.
Find more here:
https://brainly.com/question/823034?referrer=searchResultshttps://brainly.com/question/25776956?referrer=searchResultsI hope it helps you!
Heat rising in a hot-air balloon is an example of __________.
Rubies are used in electronics.
Please select the best answer from the choices provided
) Т
) F
As an aeroplane decelerates, its kinetic energy decreases. Suggest what happens to this energy
they are converted into thermal and sound energy as well as the kinetic energy in the air
Which type of electromagnetic radiation is commonly used for long-distance communications?
A. infrared radiation
B. radio waves
C. ultraviolet radiation
D. gamma rays
Answer:
B. Radio waves
Explanation:
Radio waves are transmitted easily through air. They do not cause damage if absorbed by the human body, and they can be reflected to change their direction. These properties make them ideal for communications.
Hope this helps!!
Answer:
B
Explanation:
Radio Waves
Every atom contains a
.............. which is positively charged
Answer:
Proton
Explanation:
The nucleus has an overall positive charge as it contains the protons. Every atom has no overall charge (neutral). This is because they contain equal numbers of positive protons and negative electrons.
what is the mass of an object if it’s weight on earth is 1150N
Answer:
calculate it by using formula w=m×g
The mass of an object if its weight on earth is 1150N is 117.347 kg.
What is Weight?The weight of an object is defined as the force that acts on the object due to gravity. Sometimes weight is defined as a vector quantity, the force of gravity acting on an object. Others define weight as a scalar quantity, the magnitude of the force of gravity.
It is gravitational force of attraction on an object which is caused by the presence of a massive second object like Earth or Moon. Weight is expressed by multiplying the mass times the acceleration due to gravity.
W=mg
Where, W= weight of the object
m= Mass of the object
g= Acceleration due to gravity i.e. [tex]9.8[/tex] [tex]m/s^2[/tex]
In above information,
W= 1150N
g= [tex]9.8[/tex] [tex]m/s^2[/tex]
Using the formula
m=W/g
m=1150/9.8
m=117.347 kg
Thus, the mass of an object if its weight on earth is 1150N is 117.347 kg.
Learn more about Weight, here:
https://brainly.com/question/23312072
#SPJ2
What is the given formula for acceleration?.
Answer:
a=v/t (searched)
Explanation:
a=acceleration
v=change in velocity
t=time
(searched)
Why is wrestling ring floor always softThis is physics
Answer:
So the people in the ring don't get hurt or break anything on impact once they hit the floor
How do air particles move above a candle flame
Help me out with this physics please!!!
Answer: It was on between 7 and 7.30 and also between 8 and 8.30 (when the line on the graph goes up only). So it was on for an hour or 60 minutes
PLEASE HELP!!!!!
How does the law of conservation of energy apply to an object rolling down different surfaces?
Answer:
it states that energy can either be gained or lost but it only changes its form.
Explanation:
for example:as a ball is still on the table it posses a potential energy of 100j and a k.e of 0j,as it falls it gains k.e so the midpoint the p.e is equal to the k.e (50j equally) as it approches the ground it completely gains k.e (100j) and the p.e is 0j.
total energy is 100j so it has been converted from p.e to k.e.
hope u have understood.
. Quỹ đạo chuyển động của một vật là
Answer:
you are very kind Po lang
The angular quantities L, omega, and alpha are vectors. The vectors point along the axis of rotation with a direction determined by __________.
The vectors point along the axis of rotation with a direction determined by an arrow.
What is a vector?There are two types of physical quantity one is a scaler and another one is a vector.
The quantity that requires only megnitude to define is known as the scalar quantity. While the vector quantities need both megnitude and the direction to define.
The vector quantity is represented by an arrow. The vectors point along the axis of rotation with a direction determined by an arrow.
The angular quantities L, omega, and alpha are vector quantities.
Hence arrow is the correct answer for the blank.
To learn more about the vector refer to the link;
https://brainly.com/question/13322477
The direction of the vectors of angular momentum and L, angular velocity omega and the mass alpha is determined using the right hand rule.
What is right hand rule?Righthand rule in physics states that, when we curl our right hand fingers, the direction of the angular momentum and velocity will be in the direction of thumb and curl of fingers determine the axis of rotation.
Angular momentum is a vector quantity defined as the product of moment of inertia and angular velocity where, the angular velocity ω is the rotational analogue of linear velocity i.e.. product of the linear velocity and radius of rotational path.
Therefore, the angular quantities L, angular velocity ω along the axis of rotation can be determined using the right hand rule. Where direction of thump represents the direction of vector components.
To find more on right hand rule, refer here:
https://brainly.com/question/9750730
#SPJ2
How to calculate work in chemistry.
Answer:
look on the bottom
Explanation:
Is it only the math or the physics/physical concepts that you don't get?
In this problem, you have a constant pressure of 1.00 atm. This being the case, it is an isobaric system (constant pressure), and so you have the equation that work (W) = -pressure(P) x change in volume (∆V)
This is written as W = -P∆V and is known as pressure-volume work.
Now, understand the conventions that are used.
-If work is done ON the system, it has a positive sign (+)
-If work is done BY the system, it has a negative sign (-)
In this problem, the gas is being compressed, i.e. the volume decreases, and so work is being done ON the system. Thus, the sign of W is positive (+). This comes out automatically because of negative sign in front of P∆V, So, we have W = -P∆V and substituting values, we have
W = -(1.00 atm)(1.5L - 1.25L) = -(1.00 atm)(0.25L) = -0.25 L-atm
Converting this to joules, we get -0.25 L-atm x 101.3 J/L-atm = -25.3 J (note the negative sign) Hope this all helps a little.
What is equilibrium?
Answer:
Balance is the ability to maintain body balance when placed in various positions.
----------------------------------------
[tex] \green{ \boxed{ \boxed{ \sf{Lusi \: Adriana} } } } [/tex]
Hope it is Useful..Answer:
A state of physical balance.
I hope this helps you!!!