Wave 1
WWW
m
Resulting
Wave
Wave 2
Wave 2 Phase Shift

Answer:

Explanation:

In a Solid sphere; the moment of inertia around its geometrical axis can be expressed by using the formula:

[tex]\mathtt{I_s = \dfrac{2}{5} M_s R^2_s}[/tex]

For the solid disk; the moment of inertia around the central axis is:

[tex]\mathtt{I_D= \dfrac{1}{2}M_DR_D^2}[/tex]

Suppose [tex]M_D = M_S[/tex]; then we can say both to be equal to M

As well as [tex]R_D = R_S[/tex]; then that too can be equal to R

Now;

[tex]\mathtt{I_s = \dfrac{2}{5} M R^2} --- (1)[/tex]

[tex]\mathtt{I_D= \dfrac{1}{2}MR^2}---(2)[/tex]

Multiplying equation (1) by 2, followed by dividing it by 2; we have:

[tex]\mathtt{I_s= \dfrac{2}{5}MR^2} \times \dfrac{2}{2}[/tex]

[tex]I_s = \dfrac{4}{5} \times \dfrac{1}{2}MR^2 \\ \\ I_s = \dfrac{4}{5}\times I_D \\ \\ I_s > I_D[/tex]

[tex]\sf{The~ different~ types~ of~ measuring~ instruments~ are:-}[/tex]

forces: forces applied to an object in opposite directions that are not equal in size. Unbalanced forces result in a change in motion. friction: the force that opposes the motion or tendency toward motion of two objects that are in contact.

Answer: The magnetic field at a point 1.0 cm from the central axis of the solenoid is 0.0276 T.

Explanation:

Given: Length = 0.50 m

No. of turns = 500

Current = 22 A

Formula used to calculate magnetic field is as follows.

[tex]B = \mu_{o}(\frac{N}{L})I[/tex]

where,

B = magnetic field

[tex]\mu_{o}[/tex] = permeability constant = [tex]4\pi \times 10^{-7} Tm/A[/tex]

N = no. of turns

L = length

I = current

Substitute the values into above formula as follows.

[tex]B = \mu_{o}(\frac{N}{L})I\\= 4 \pi \times 10^{-7} Tm/A \times (\frac{500}{0.5 m}) \times 22\\= 0.0276 T[/tex]

Thus, we can conclude that magnetic field at a point 1.0 cm from the central axis of the solenoid is 0.0276 T.

area= length × length

area = 4m × 9m

ans 36

Answer:

a) The heat input per cycle is 2857.143 joules.

b) The temperature of the low-temperature reservoir is 49.655 °C.

Explanation:

a) The efficiency of the Carnot engine is defined by the following formula:

[tex]\eta_{th} = 1-\frac{T_{L}}{T_{H}} = 1 - \frac{Q_{L}}{Q_{H}}[/tex] (1)

Where:

[tex]T_{L}[/tex] - Low temperature reservoir, in Kelvin.

[tex]T_{H}[/tex] - High temperature reservoir, in Kelvin.

[tex]Q_{L}[/tex]  - Heat output, in joules.

[tex]Q_{H}[/tex] - Heat input, in joules.

[tex]\eta_{th }[/tex] - Engine efficiency, no unit.

If we know that [tex]\eta_{th} = 0.3[/tex] and [tex]Q_{L} = 2000\,J[/tex], the heat input of the Carnot engine is:

[tex]\eta_{th} = 1 - \frac{Q_{L}}{Q_{H}}[/tex]

[tex]\frac{Q_{L}}{Q_{H}} = 1 - \eta_{th}[/tex]

[tex]Q_{H} = \frac{Q_{L}}{1-\eta_{th}}[/tex]

[tex]Q_{H} = \frac{2000\,J}{1-0.3}[/tex]

[tex]Q_{H} = 2857.143\,J[/tex]

The heat input per cycle is 2857.143 joules.

b) If we know that [tex]T_{H} = 461.15\,K[/tex] and [tex]\eta_{th} = 0.3[/tex], then the temperature of the low-temperature reservoir:

[tex]\eta_{th} = 1 - \frac{T_{L}}{T_{H}}[/tex]

[tex]\frac{T_{L}}{T_{H}} = 1 - \eta_{th}[/tex]

[tex]T_{L} = T_{H}\cdot (1-\eta_{th})[/tex]

[tex]T_{L} = (461.15\,K)\cdot (1-0.3)[/tex]

[tex]T_{L} = 322.805\,K[/tex]

[tex]T_{L} = 49.655\,^{\circ}C[/tex]

The temperature of the low-temperature reservoir is 49.655 °C.

The type of model shown here is an experimental model. The correct option is B.

Animals are used in experimental modeling to model the development and progression of diseases and to test new treatments before they are administered to humans.

This result stems from the distinction that, whereas experiments are versions of the real world captured within an artificial laboratory environment, models are artificial worlds constructed to represent the real world.

Theories are plausible explanatory propositions developed to connect potential causes to their effects.

Models are schematic representations of reality or one's view of a possible world that are built to improve one's understanding of the world and/or to make predictions.

Thus, the correct option is B.

For more details regarding model, visit:

https://brainly.com/question/28381011

#SPJ7

Your question seems incomplete, the probable complete question is:

“The magnification produced by a spherical mirror is -3”. List four information you obtain from this statement about the mirror/image.

Answer:

acceleration is measured

Answer:

Photosynthesis, the process by which green plants and certain other organisms transform light energy into chemical energy. ... During photosynthesis in green plants, light energy is captured and used to convert water, carbon dioxide, and minerals into oxygen and energy-rich organic compounds.

Explanation:

thank me later

Answer:

bvihobonlnohovicjfufufufucvkvkvvjcufufydyfuvi

Answer:

The appropriate solution is "2.78 mm".

Explanation:

Given:

[tex]\lambda = 720 \ nm[/tex]

or,

  [tex]= 720\times 10^{-9} \ m[/tex]

[tex]D=0.85 \ m[/tex]

[tex]d = 0.22 \ mm[/tex]

or,

  [tex]=0.22 \times 10^{-3} \ m[/tex]

As we know,

Fringe width is:

⇒ [tex]\beta=\frac{\lambda D}{d}[/tex]

hence,

Separation between second and third bright fringes will be:

⇒ [tex]\theta=\beta=\frac{\lambda D}{d}[/tex]

       [tex]=\frac{720\times 10^{-9}\times 0.85}{0.22\times 10^{-3}}[/tex]

       [tex]=2.78\times 10^{-3} \ m[/tex]

or,

       [tex]=2.78 \ mm[/tex]

Answer:

T = 17649.03 N = 17.65 KN

Explanation:

The tension in the cable must be equal to the apparent weight of the passenger. For upward acceleration:

[tex]T = W_A = m(g+a)\\[/tex]

where,

T = Tension in cable = ?

[tex]W_A[/tex] = Apparent weight

m = mass = 1603 kg

g = acceleration due to gravity = 9.81 m/s²

a = acceleration of elevator = 1.2 m/s²

Therefore,

[tex]T = (1603\ kg)(9.81\ m/s^2+1.2\ m/s^2)\\\\[/tex]

T = 17649.03 N = 17.65 KN

the earth is on the month of June

Solution :

We all know that a bar magnet have two poles, the north pole and the south pole. These poles interacts with each other. The ends of the magnets having similar poles will push each other away while the poles with like charges will pull each others towards it.

The compass needle is also a magnet having south polarity as well as north polarity. When the compass needle is close to the bar magnet, it is opposite to the poles or along the poles. The compass needle shows the direction or is pointed towards the north. So when the compass needle is placed near the north pole of the bar magnet, the pointer of the compass needle points towards the north, i.e. it gets deflected because of he like charges. And when it is placed near the south pole of the magnet, it gets attracted towards it and is pointed towards the pole.

Now as we move the compass needle from the poles to the region that is between the poles, the compass needle pointer points towards the north direction every time. It show a deflection always. If we place the magnetic lines, we will see that the magnetic lines will exit from the north poles and enters the south pole of the bar magnet.  

Answer:

amplitude

Explanation:

The loudness of a musical sound is a measure of the sound wave's ?

is amplitude explanation:- The loudness of a sound depends upon the amplitude.Loudness of a sound depends on the amplitude of the vibration producing that sound. Greater is the amplitude of vibration, louder is the sound produced by it. if you find this answer helpful please rate positive thank you so much.

Answer:

a)   a = 34.375 m / s²,  b)    v_f = 550 m / s

Explanation:

This problem is the launch of projectiles, they tell us to ignore the effect of the friction force.

a) Let's start with the final part of the movement, which is carried out from t= 16 s with constant speed

             v_f = [tex]\frac{x-x_1}{t}[/tex]

we substitute the values

             v_f = [tex]\frac{ 6600 -x_1}{4}[/tex]  

The initial part of the movement is carried out with acceleration

             v_f = v₀ + a t

             x₁ = x₀ + v₀ t + ½ a t²

the rocket starts from rest v₀ = 0 with an initial height x₀ = 0

             x₁ = ½ a t²

             v_f = a t

we substitute the values

              x₁ = 1/2  a 16²

              x₁ = 128 a

              v_f = 16 a

let's write our system of equations  

               v_f = [tex]\frac{6600 - x_1}{4}[/tex]

               x₁ = 128 a

               v_f = 16 a

we substitute in the first equation  

               16 a = [tex]\frac{6600 -128 a}{4}[/tex]

               16 4 a = 6600 - 128 a

                a (64 + 128) = 6600

                a = 6600/192

                 a = 34.375 m / s²

b) let's find the time to reach this height

                x = ½ to t²

                t² = 2y / a

                t² = 2 5100 / 34.375

                t² = 296.72

                t = 17.2 s

We can see that for this time the acceleration is zero, so the rocket is in the constant velocity part

               v_f = 16 a

               v_f = 16 34.375

               v_f = 550 m / s

Answer:

The battery is charging and has a current of 2Amps passing through.

Explanation:

Given;

EMF of the battery, E = 12 V

internal resistance, r = 0.5 ohms

terminal voltage of the battery, ΔV = 13 volts

When the terminal voltage is greater than the EMF of the battery, the battery is being charged, allowing currents to pass in a reverse direction.

ΔV = E - Ir

ΔV - E = -Ir

13 - 12 = -0.5I

1 = -0.5I

I = 1 / -0.5

I = -2 A

The negative sign indicates the reverse direction of the current.

Therefore, the battery is charging and has a current of 2Amps passing through.

Answer:

Option C, acting as waves and particles

Explanation:

Light has dual nature  because it acts both as a wave and particle. It has high energy particle i.e photons and it also behave as an electromagnetic wave. This property of light is studied under the quantum mechanics. Einstein also proved that light is a stream of photons possessing both electrical and magnetic properties.

Hence, option C is correct

Answer:

resonance is when a body is made to vibrate with the frequency of another body without touching it.

Explanation:

example of destructive: soldiers matching on a bridge unanimously can make the bridge collapse.

Answer:hi

i like ears

and lemon

and poetry

Explanation:

Answer:

yes

Explanation:

this means the answer is yes

Answer:

Y = 5.03 x 10⁻³ m = 5.03 mm

Explanation:

Using Young's Double-slit formula:

[tex]Y = \frac{\lambda L}{d}[/tex]

where,

Y = Fringe Spacing = Width of bright fringe = ?

λ =  wavelength = 633 nm = 6.33 x 10⁻⁷ m

L = Screen distance = 3.1 m

d = slit width = 0.39 mm = 3.9 x 10⁻⁴ m

Therefore,

[tex]Y = \frac{(6.33\ x\ 10^{-7}\ m)(3.1\ m)}{3.9\ x\ 10^{-4}\ m}[/tex]

Y = 5.03 x 10⁻³ m = 5.03 mm

Answer:

B. They are inversely proportional to each other

[tex] \frac{momentum}{time} = force \\ \\ \frac{mass \times velocity}{time} = force \\ \\ \frac{mass \times velocity}{time} = mass \times acceleration[/tex]

Answer:

Only a decreasing gravitational force that acts downward

Explanation:

The gravitational force is the gravitational pull which attract a mass of smaller size by the mass of a bigger size.  It is the force which attract two masses close to each other.

In the context, when a ball is tossed up from the surface of an asteroid that have no atmosphere, the ball rises up and then falls back to the surface of the asteroid. The ball falls back because the gravitational pull of the asteroid pulls back the ball to its surface. Thus a decreasing gravitational force acts on the ball in the downward direction while the ball is in its way up.  

Answer:

I = 1.58 x 10⁻³ watt/m²

Explanation:

Here, we will use the following formula:

[tex]\beta = 10\ log_{10}(\frac{I}{I_o})[/tex]

where,

β = decibel level = 92 dB

I = Intenisty of sound in watt/m² = ?

I₀ = reference intensity = 10⁻¹² watt/m²

Therefore,

[tex]92\ dB =10\ log_{10}(\frac{I}{10^{-12}\ watt/m^2} )\\\\[/tex]

[tex]10^{9.2} = \frac{I}{10^{-12}}\ watt/m^2\\\\I = (1.58\ x\ 10^9)(10^{-12}\ watt/m^2)[/tex]

I = 1.58 x 10⁻³ watt/m²