what is 606 as a 2 sig fig answer?

The enthalpy changes for each of the following reactions are:

The difference between total reactant and total product molar enthalpies estimated for substances in their standard states is the standard enthalpy of reaction for a chemical process. The quantity of heat evolved or absorbed in a process under constant pressure is referred to as enthalpy change. It is assigned the symbol ΔH, interpreted as "delta H".

Enthalpy is the product of internal energy and pressure multiplied by volume. We can't measure a system's enthalpy, but we can look at variations in enthalpy. The sum of internal energy (U) and the product of pressure (P) and volume (V) equals enthalpy (H) (V). The system's heat added or lost is quantified as a change in enthalpy (H), not the actual amount of heat.

To learn more about enthalpy change, here

https://brainly.com/question/29556033

#SPJ4

In the final step of the enzyme substrate complex, the product leaves the active site of the enzyme .

The whole process of enzyme substrate complex is a temporary molecule formed when an enzyme comes into perfect contact with its substrate. Without its substrate an enzyme is a slightly different shape. The substrate causes a conformational change when the substrate enters the active site. The active site is the area of the enzyme capable of forming weak bonds with the substrate. some enzyme functions independently. This shape change can force two or more substrate molecules together or split individual molecules into smaller parts. Most reactions that cells use to stay alive require the actions of enzymes to happen fast enough to be useful. It is influenced by temperature and pH.

To learn more about Enzyme substrate complex please visit:

https://brainly.com/question/15027095

#SPJ4

K2SO4 has the most ions out of the options, which means its freezing point will degrade the most.

Which aqueous solution with a concentration of "0.1 M" will have the lowest freezing point

UThe answer is "K 2SO 4" ionises to produce three ions, increasing the effective molality of the solution by three times. Its freezing point is therefore the lowest.

Since 1M glucose solution does not go through dissociation to produce more particles, it has a lower  

which results in a higher freezing point

Learn more about Freezing Point

brainly.com/question/9530198

#SPJ4

Automobiles and trucks pollute the air with NO. At 2000.0°C, Kc for the reaction At 2000.0°C Kc = 4.100 × 10–4 and H° = 180.6 kJ.  3.3396 * 10⁻³⁰ is the value of Kc at 39.00°C.

When atoms establish or break chemical bonds, chemical processes take place. Reactants are the substances that begin a chemical reaction, while products are the compounds that are created as a result of the reaction.

In a chemical reaction, reactants undergo a chemical reaction and transform into products through a chemical process. For instance, when humans breathe in oxygen, it combines with glucose to create carbon dioxide, water, and energy. The response is provided below. C6H12O6 + 6O2 → 6CO2 + 6H2O + Energy.

ln ( K₂ / K1 ) = ( 1 / T1 - 1 / T₂)

K₂ is rate constant at temperture T₂

K₁ is rate constant at temperature T₁

K₁ = 4.100 × 10–4

T₂ = 321 K

ΔH = 180.6 kJ

R = 8.314 mole ⁻¹

Ln ( K₂ /  4.100 × 10–4 ) = 180.6 * 10 ³ / 8.314 ( 1 / 2273 - 1 / 312 )

=  - 60.066

K₂ = 3.3396 * 10⁻³⁰

Thus,  3.3396 * 10⁻³⁰ is the value of Kc at 39.00°C.

To learn more about reaction, follow the link;

https://brainly.com/question/3664113

#SPJ4

The Kc value for the reaction at 39 degree celsius can be determined using the Clausius - Clapeyron equation. The Kc value is obtained to be 2.3 × 10⁻⁴.

The Clausius -Clapeyron equation is used find the reaction constant at two different temperatures using the expression written below:

[tex]\rm ln \frac{K _{2}}{K_{1}} =\frac{ H^{0} }{R} [\frac{1}{T_{1}} -\frac{1}{T_{2}} ][/tex]

Where, R is the universal gas constant, H be the enthalpy of the reaction.

Given that T1 = 39 °C

T2 = 2000 °C

H° = 180.6 kJ.

K2 = 4.1 × 10⁻⁴.

Then ln ( 4.1 × 10⁻⁴/ K1) = 180.6 kJ/ 8.314 J/°C [1/39 - 1/2000]

K1 = 2.3 × 10⁻⁴.

Therefore, the Kc value at a temperature of 39 degree Celsius is  2.3 × 10⁻⁴.

To find more on Clausius - Clapeyron equation, refer here:

https://brainly.com/question/13162576

#SPJ4

Starch is a covalent compound because no ions is present in it.

A covalent bond is made from the mutual sharing of one or more pairs of electrons between two atoms. These electrons in a covalent bond are simultaneously attracted by the two atomic nuclei. A covalent bond is formed when the difference between the electronegativities of two atoms is too small for an electron transfer to occur and to form ions.

Starch is composed of long chains of glucose molecules that are bonded together through covalent bonds called glycosidic bonds. As starch contains covalent bonds it it, so it is a covalent compound.

Learn more about covalent compound from the link given below.

https://brainly.com/question/10748806

#SPJ4

The correct classification of the following compounds are as follows:

Organic compound are any compound containing carbon atoms covalently bound to other atoms most commonly hydrogen, oxygen, or nitrogen.

Inorganic compounds are those not containing carbon atoms or containing carbon atoms ionically bound to other atoms.

However, not all carbon-containing compounds are organic. For example, carbon dioxide is an inorganic compound; although it has a carbon atom it has no C-C or C-H bonds.

Therefore, the classification of organic and inorganic compounds is as illustrated above.

Learn more about organic compound at: https://brainly.com/question/5994723

#SPJ1

In 1941, gold was created by neutron bombardment from mercury, but the isotopes were all radioactive.

What is neutron irradiation? When a high-energy neutron bombards a nucleus to start nuclear fission, more neutrons are released during the process. A neutron has no charge, thus when it is pointed at the nucleus, it is not repulsed.

When uranium-235 is irradiated with neutrons, the uranium atoms split, releasing heat and atoms with decreasing atomic numbers as well as more neutrons. Similar to typical fossil fuel power plants, this process, known as fission, may harness the heat produced to produce electricity.

To know more about bombardment visit :-

https://brainly.com/question/1103578

#SPJ4

The IR spectrum of ethene is rather simple due to its simple structure.

The interpretation of infrared spectra involves the connection of absorption bands in the spectrum of an unknown composite with the known absorption density for types of bonds,

The right-hand part of the infrared spectrum of ethane, wavenumbers ~1500 to 400 cm-1 is examined in the fingerprint region. This is a very neat tool for interpreting IR spectra.

So we can conclude that Interpretation of the infrared spectrum of ethene​​ There are osmosis bands at ~1400 cm-1 due to scissoring H-C-H vibrations and ~3100 cm-1 from H-C-H

Learn more about spectrum here: https://brainly.com/question/21134950

#SPJ1

The Precipitate formed is of CdS and the ions remaining are Na+ and NO3-.

The complete balanced chemical reaction is as follows:

Cd(NO3)2 + Na2S → CdS + 2NaNO3

Precipitation in an aqueous solution is the process of converting a dissolved component into an insoluble solid from a supersaturated solution. The precipitate is the solid that forms. In chemistry, a solid generated by a change in a solution, usually owing to a chemical reaction or a temperature shift that reduces the solubility of a solid.

A chemical may precipitate when its concentration exceeds its solubility. This can be caused by temperature fluctuations, solvent evaporation, or solvent mixing. A severely supersaturated solution precipitates more quickly.

A chemical reaction can result in the development of a precipitate. A white precipitate of barium sulphate is created when a barium chloride solution combines with sulphuric acid.

To learn more about Precipitate, here

https://brainly.com/question/18109776

#SPJ4

Answer: The place where the kinetics energy is the highest is where the ball struck the ground.

So that is base. However, this base (CH 3COO) is actually a derivative of the acid (CH 3COOH), which is why CH 3COO is an acid's conjugate base. What distinguishes a conjugate base from an acid hbr?

H2CO3 is the conjugate acid. acid carbonate. What is CH3COO's conjugate acid? The conjugate acid for the acetate ion is acetic acid. What is the CH3COO- conjugate acid? What does the term conjugate base mean? An acid's conjugate base is what is left over after the acid has contributed its proton. Example: HX is the acid, and X- is the conjugate base. An acid's conjugate base is what is left over after the acid has contributed its proton.  Acid is HX, while base is conjugate.

To learn more about conjugate please click on below link

https://brainly.com/question/28175934

#SPJ4

A substrate in biology can be either a chemical that an enzyme can operate on or the surface that an organism (such as a plant, fungus, or animal) lives on. A substrate in geology is the surface of a rock or sediment where chemical and biological processes take place.

Geology describes it as the layer of rock or other elements that lies beneath the soil. For instance, a page is a substrate for ink to stick to, rock is a substrate for fungi, and NaCl is a substrate for a chemical reaction. The basic material on which processing is carried out is referred to as the substrate in the fields of materials science and engineering. This surface might be employed to create new films or material layers, like deposited coatings. It might serve as the foundation for the bonding of paint, adhesives, or sticky tape.

The substrate in biochemistry is a molecule that an enzyme reacts with. Chemical processes involving the substrate are catalyzed by enzymes (s). One or more products are created from the substrate, and they are then released from the active site. After that, another substrate molecule can be taken up by the active site.

Learn more about substrate process Visit: brainly.com/question/1738916

#SPJ4

The freezing point of the solution is -3.53°C.

The Chemical equation of the HBr is -

              HBr → H⁺ + Br ⁻

Initial -     1         0      0

Final -      1-α     α       α

The total moles = 1 - α + α + α

                          = 1 + α

half factor = i = Total mol / Initial mol

                      = 1 + α / 1

                      = 1 + α

Now, Evolution in freezing point

                         ΔT f = i Kf m

                          kf = 1.86                                                (given)

   m(molality = mass of solute / solvent (Kg))

                        Δ T f  = (1 + α) × 1.86 × (mass/molar mass ) / solvent

   [ α = 90/100 = 0.9 because 90% ionised]

  putting the values in above equation -

                           = (1 + 0.9) × 1.86 × (8.1 × 1000) / 81 × 100(gm)

                              ΔT = 3.53°C

    Then freezing point T f =  T° f - ΔT

                            = 0 - 3.53°C

                           T f = -3.53°C

To learn more about Freezing point from given link

https://brainly.com/question/28182670

#SPJ4

Complete Question -

What is the freezing point of a solution containing 8.1 g HBr in 100gm. water assuming the acid to be 90% ionised:

[Kf for water =1.86Kmolarity^−1 ]

Answer:

400 meters

Explanation:

Distance is the amount traveled. It doesn't matter if the runners start and end in the same place for distance, they still travel 400 meters.

Answer:

Study 'atom'

Explanation:

atoms are in the building blocks for molecules. the atom has protons and neutrons in its nucleus and electrons revolving around it. An atom can survive in its surrounding by either sharing electrons or by transferring electrons. Protons are positively charged and electrons are negatively charged. They are also called subatomic particles. When atoms lose electrons they get positively charged, and when they gain electrons they get negatively charged. When a metal is reacting with a non-metal, the metal is positively charged and transports an electron to the non-metal. The metal becomes positively charged and the nonmetal becomes negatively charged. the metal becomes the cation and the nonmetal becomes the anion. Thus, reactivity can cause gain or loss of charges.

To solve this, we must know each and every concept related to friedel-crafts alkylation reaction. Therefore, the correct option is option E among all the given options.

The Friedel-Crafts synthesis is just an aromatic chemical method in which an electrophilic substitution substitution takes place. The hydrogen in benzene is replaced by an electrophile in the vicinity of a Lewis acid, like anhydrous aluminium chloride.

Friedel-Crafts Alkylation is a chemical process in which the proton of an aromatic molecule is replaced with an alkyl. This reaction happens when there is  anhydrous aluminum chloride. Anhydrous aluminium chloride can be replaced with other Lewis acids, like FeCl[tex]_3[/tex].

Therefore, the correct option is option E.

To know more about Friedel craft reaction, here:

https://brainly.com/question/28488661

#SPJ4

After solving the equation the Molecular mass is 254 s is the answer.

What is Molecular mass?

Molecular mass is the sum of the atomic masses of all the atoms present in a molecule. It is an important property of molecules that is used in determining the chemical and physical properties of the molecule. Molecular mass is usually expressed in units of atomic mass units (amu) or daltons (Da). It is important to note that the molecular mass of a compound is not necessarily equal to the sum of the atomic masses of its constituent atoms, as the atoms in a molecule may be bound together by covalent bonds, which can alter their individual masses. Molecular mass can be calculated by adding the masses of the individual atoms present in the molecule. This value can be used to determine the identity of the molecule and its properties. Additionally, the molecular mass of a compound can be used to calculate the molar mass of the compound, which can be used to calculate the amount of a substance present in a given volume.

First we calculate,

Molecular mass of propane C3H8

= 3 x 12 + 1 x 8

= 44 gm/ml

Now, calculate amount of propane, c3h8, to effuse through the same orifice under the same conditions:-

[tex]t_{N2}[/tex]/[tex]t_{C3H8}[/tex] = [tex]\sqrt{28 gm/ml/ 44gm/ml}[/tex]

               = 0.49

[tex]t_{C3H8}[/tex] = 125 s/0.49

         = 254 s is the answer.

To learn about this Molecular mass

https://brainly.com/question/837939

#SPJ4

When there is a separation of charge, dipole moments happen. Dipole moments, which result from variations in electronegativity, can happen between atoms in a covalent link or between two ions in an ionic bond.

The dipole moment increases with the difference in electronegativity. The size of the dipole moment is also affected by the distance between the charge separations. The polarity of the molecule is determined by the dipole moment. A dipole moment is produced when electrons are distributed unevenly among atoms in a molecule. This happens when one atom possesses a lone pair of electrons and the difference in electronegativity vector points in the same direction, or when one atom is more electronegative than another, causing that atom to pull more strongly on the shared pair of electrons. The water molecule, which consists of one oxygen and two hydrogen atoms, is one of the most prevalent instances. Each hydrogen has a partial positive charge, while oxygen has a partial negative charge due to variances in electronegativity and lone electrons.

The complete question and answer are attached as images.

Want to know more about dipole moment visit the link which is given below;

https://brainly.com/question/14140953

#SPJ4

The freezing point of a solution of 15.0 g NaCl (sodium chloride) and 250 g water is -4.4°C.

Freezing point is the tempreture at which a liquid turns into a solid. It is the temperature it is the molecules of liquid stop moving really and start to format solid crystal structure.
This is because the freezing point depression of a solution is proportional to the molality of the solute. The molar mass of NaCl is 58.44 g/mol, so the solution has a molality of 0.25 m. Using the formula for freezing point depression, ΔTf = i Kf m, where i is the van't Hoff factor (2 for NaCl), Kf is the freezing point depression constant (1.86°C/m), and m is the molality, we can calculate that the freezing point depression of this solution is 0.46°C, resulting in a freezing point of -4.4°C.
To know more about freezing point click-
https://brainly.com/question/24314907
#SPJ4

We are aware that one Avogadro constant (N a=6.022*1023; Na =6.022*1023 ) equals one mole of any substance. Since MM=197 g/mol --> n= 8.87 g/197 g/mol 0.450*10-2 mol in this instance.

Determine the substance's molecular weight in units of one mole, then divide the molar mass value by the molecular mass, and multiply the result by the Avogadro constant to get the required number of molecules.

Auric chloride (AuCl3) and chloroauric acid are the most prevalent gold compounds (HAuCl4). Aqua regia is a solution made by combining one component of nitric acid with three parts of hydrochloric acid (because it dissolved gold, the King of Metals).

to know more about mass here:

brainly.com/question/28180102

#SPJ1

​

​

​

​

​

​

​

Pyruvate undergoes fermentation, which transforms it into lactic acid inside the absence of oxygen.

The breakdown of the drug occurs throughout this process. similar to how pyruvate is converted into lactic acid.

An organic acid contains lactic acid. Its chemical formula is CH 3CH(OH)COOH.

It serves as a synthesis precursor inside a number of biochemical as well as molecular synthesis industries.

The final result of the glycolysis pathway, pyruvate, is transformed into lactic acid inside the lack of oxygen.

Glycolysis

The process through which glucose gets broken down to provide energy is known as glycolysis.

Learn more about Fermentation here :-

https://brainly.com/question/13050729r

#SPJ4

Since the number of hybrid orbitals equals the number of atomic orbitals, 4 hybrid orbitals are created by combining 4 atomic orbitals of the same atom.

Thus, four hybrid orbitals with a tetrahedral structure will be formed by the 1 s and 3 p orbitals.

The process of hybridization is the mixing of atomic orbitals with the same energy levels to create an equal number of new hybrid orbitals. This mixing typically produces hybrid orbitals with completely distinct energies, geometries, etc.

When two atomic orbitals in a molecule combine to generate a hybrid orbital, the energy of the orbitals of the individual atoms is redistributed to give orbitals of equivalent energy. Hybridization is the name of this procedure.

Learn more about Hybridization here:

https://brainly.com/question/22765530

#SPJ4

a. The acid on the left is H₂O and its conjugate base on the right is OH⁻.

b. The base on the left is HONH₂ and its conjugate acid on the right is HONH₃⁺.

Chemical reactions between acids and bases always produce its conjugate base and its conjugate acid. According to Bronsted-Lowry

HONH₂ + H₂O ⇄ HONH₃⁺ + OH⁻

Learn more about conjugate acid and base here: https://brainly.com/question/12584785

#SPJ4

Option C) "are digested by proteases into both opiate and non-opiate peptides" is the correct response.

Like all other propeptides, the opioid propeptides is a protein precursor that must be cut into a smaller form to become active. Proteases convert the opioid propeptides into opiate and non-opiate peptides, the latter of which may or may not be active. Enkephalins, endorphins, and dynorphins, which are opiate peptides, work by blocking secondary systems, such as those that affect how pain is perceived.

The opioid receptors are essential signalling molecules in the brain that the leucine-enkephalin binds to. They include four peptide bonds in total. These are naturally occurring ligands that function as neurotransmitters and have morphine-like properties.

To learn more about Enkephalins please click on below link

https://brainly.com/question/20357854

#SPJ4

Answer: What is soil? In short, soil is a mixture of minerals, dead and living organisms (organic materials), air, and water.

Explanation:

Soil is a mixture of solids, liquids, and gases. Therefore, option B is correct.

Broken-down organic matter termed humus, living creatures, and broken-down rocks and minerals make up soil. Humus is nutrient-rich, squishy, and black.

Soil is a heterogeneous combination because it is made up of tiny fragments of various components. Water is an object. Water is a compound because it contains both hydrogen and oxygen. The substance oxygen is an element.

In addition to a porous phase that contains water and gases, soil consists of a solid phase made up of minerals and organic matter. The three states of soil are thus solids, liquids, and gases.

Thus, option B is correct.

To learn more about soil, follow the link;

https://brainly.com/question/23813511

#SPJ2

The oxygen atom in the water molecule has two lone pairs, one of which could be used to form a bond with a proton and, therefore, the water molecule could act as a base in a reaction. Since water has the potential to act both as an acid and as a base, water is amphoteric.

For more answers, Contact:
https://brainly.com/app/profile/63103549/answers

The classification of each protein is:

Proteins are essential macromolecules for human health, playing a vital role in the functioning of the human body. From hormones and enzymes to structural proteins and antibodies, proteins are the building blocks of life and are involved in a wide range of biological processes. In this essay, the importance of proteins in human health will be discussed, focusing on their four main functions:

Hormones are proteins that regulate various physiological processes in the body. Insulin, for example, is a hormone that is essential for glucose utilization in the human body. Without insulin, glucose cannot be metabolized and utilized properly, leading to serious health issues such as diabetes.

Enzymes are proteins that catalyze biochemical reactions in the body. Lipases, for example, are enzymes that hydrolyze lipids, which are essential for the digestion of food. Without lipases, the body would not be able to properly digest and absorb the essential nutrients from food.

Learn more about proteins :

https://brainly.com/question/20398312

#SPJ4

The freezing point of an aqueous solution containing 17g of c2h5oh in 1000g of water −0.69 degree celcius

What is freezing point?

When the temperature of a liquid falls below its freezing point, it transforms into a solid. According to the internationally accepted definition, freezing is the solidification phase change of a liquid or the liquid content of a substance caused by cooling.

Most substances have the same melting and freezing points; however, certain substances have different solid-liquid transition temperatures. Agar, for example, exhibits hysteresis in its melting and freezing points. It melts at 85 °C (185 °F) and solidifies at 32 °C to 40 °C (89.6 °F to 104 °F).

Hence, the freezing point of an aqueous solution containing 17g of c2h5oh in 1000g of water −0.69 degree celsius

△T f = K f × m B ×w A. w B ×1000

​ =1.86× 46×100017×1000

​ =0.69

∴ Freezing point of solution =0−0.69=−0.69 degree celsius

To know more about freezing point from given link

https://brainly.com/question/24314907

#SPJ4

After solving the equation benzene is 2.698 kg is the correct answer.

Description of the answer

1 day = 24 hrs = 24×60 minute = 1440 minutes

concentration of benzene in groundwater = 5 mg/l

100 gallon = 378.541 L

100 gallon/minute = 378.541 L/minute

100 gallon (378.541 l) benzene contaminated groundwater is being pumped per minute, therefore the volume of groundwater being pumped in one day (i.e. 1440 minutes) = (378.541 × 1440) l = 545099.04L

Since 1 l groundwater is contaminated with 5 mg benzene, therefore 545099.04 l groundwater is contaminated with = (545099.04 × 5) mg = 2725495.2 mg = 2725.495 g = 2.725 kg

Thus, 545099.04 l groundwater is pumped per day, which contains a total of 2.725 kg benzene as contamination.

Since 99% benzene from groundwater has to be removed, therefore benzene waste (kg) needed to be treated per day = (2.275 × 99 / 100) kg = 2.698 kg.

To learn more about the benzene

https://brainly.com/question/6028840

#SPJ4