The solution can be described as a supersaturated solution.
What is potassium chlorate?Potassium chlorate is an inorganic compound composed of potassium, chlorine and oxygen. It is an oxidizing agent and a white crystalline solid at room temperature. It is used as a bleaching agent, in fireworks, matches, explosives, and fertilizers. It is also used to make chloric acid and in the production of paper, dyes, and textiles. Potassium chlorate is highly reactive and can be hazardous if not used properly. It is important to use personal protective equipment when handling it.
This means that the solution contains more of the dissolved compound than it can normally hold at the given temperature. In this case, the water is holding more potassium chlorate than it would normally be able to hold at the given temperature. As the temperature increases, the solubility of a substance increases, allowing more potassium chlorate to be dissolved.
To know more about potassium chlorate click-
https://brainly.com/question/1388701
#SPJ4
Explain the processes involved in the flow of water, both above and below the ground. Be sure to use at least 5 vocabulary terms in your paragraph.
The hydrologic cycle, another name for the water cycle, describes where and how water is kept on Earth.
How the flow of water regulated?In the atmosphere, on the surface of the land, and underground, water is kept in reserve. It could be a gas, a liquid, or a solid. Either fresh or salt water can be a liquid (salty).
Water flows between its storage locations. It flows on both extremely tiny scales and very big scales (via watersheds, the atmosphere, and below the Earth's surface) (in people, in plants, and in other organisms).
Water flows both naturally and as a result of human activity. The motion of water on Earth is sustained by the force of gravity and solar energy. The water cycle is impacted by human activity because it changes where water is.
For more information on water cycle kindly visit to
https://brainly.com/question/1151425
#SPJ1
Does Cupid have a gender?
They gave him the name Cupid, which is another name for Eros and also means "desire."For the Romans, Cupid was usually a cute little lad who carried out his mother's instructions to make individuals fall in love.
Does Cupid have a female counterpart?Eros (Roman Cupid), the deity of love, and his wife PSYKHE (Psyche), the goddess of a soul.She was originally a mortal princess, and when mankind started to worship her instead of the goddess Aphrodite (Roman Venus), the goddess became enraged.
Who is the daughter of Cupid?According to Apuleius, Voluptas and Volupta is indeed the daughter of Cupid and Psyche in Roman mythology.The Latin term voluptas, which is also known as that of the goddess for "sensual pleasures," signifies "pleasure" or "delight."She frequently hangs out with the Gratiae, also known as the Three Graces.
To know more about Cupid visit:
https://brainly.com/question/13516179
#SPJ4
2. Which of the following is not a characteristic of carbon that allows for the great variety of
organic compounds?
Carbon is able to form single, double, and triple bonds.
Carbon is able to form strong bonds with other carbon atoms.
Carbon possesses four valence electrons.
Carbon has a larger atomic radius than other Group 14 elements.
rhon ond
Answer:d
Explanation:
d
Question 2 Draw The Major Product Of The Elimination Reaction Shown.
An elimination reaction can have two products major and minor which are shown in the attached diagram below.
What is an elimination reaction?An elimination reaction can be described as a type of organic reaction in which two substituents are eliminated from a molecule in either a one- or two-step mechanism.
The one-step mechanism is called the E₂ reaction, and the two-step mechanism is called the E₁ reaction. The kinetics of the reaction: E₂ is bimolecular or second-order while E₁ is a unimolecular or first-order reaction.
In cases where the molecule is capable to stabilize an anion but has a poor leaving group, a third type of reaction, E₁-CB.
The E₂ mechanism involves a one-step mechanism in which carbon-hydrogen and carbon-halogen bonds break to prepare a double bond.
E₁ stands for unimolecular elimination where the carbon-halogen bond breaks to give a carbocation intermediate and then deprotonation of the carbocation.
Learn more about elimination reactions, here:
https://brainly.com/question/29695970
#SPJ4
What are scope 4 carbon emissions?
The emission of carbon that are avoided are called scope 4 Carbon emission.
The scope for Carbon emissions are those emissions of carbon which are reduced or avoided.
They can also be defined as the reductions that have occurred outside of a products complete cycle or the value chain.
The product cycle are those which are related to the manufacturing cycle of the carbon related products.
Collectively all the greenhouse emissions that are avoided or which are reduced to a very significant level are known as scope 4 emissions.
To know more about carbon emission, visit,
https://brainly.com/question/1301348
#SPJ4
What will happen if there is a greater concentration of H+ in the intermembrane space of the mitochondria?
The greater concentration of H+ in the intermembrane space of the mitochondria more will be the more ATP production by ATP synthetase.
The high external H+ ions concentration influences concentration within intermembrane space, which increases the amount of ATP produced by ATP synthase. The functioning of ATP synthase solely depend on the gradient of H+ ion concenteration. This gradient must have a high concentration in the intermembrane space and a low concentration in the matrix. H+ cannot flow through the outer membrane of the mitochondria but can do so through the inner membrane. By putting mitochondria in a low pH buffer, an H+ gradient is created, which ATP synthase can use to synthesize ATP.
Hence, movement of H + across ATP synthase generates ATP.
To know more about Buffer.
https://brainly.com/question/22821585
#SPJ4
Aldol Condensation Mechanism. Cyclopentanone Reacted With Trans-Cinnamaldehyde
The aldol condensation is a chemical reaction that occurs between a carbonyl compound and an alpha, beta-unsaturated carbonyl compound to form a new carbon-carbon bond, resulting in the formation of a new molecule. This reaction is an example of a crossed aldol reaction because the two starting compounds are not structurally similar.
In the case of cyclopentanone reacting with trans-cinnamaldehyde, the reaction occurs in the following steps:
Protonation of the alpha carbon of the trans-cinnamaldehyde by a strong acid such as hydrochloric acid (HCl). This step creates a resonance-stabilized carbanion intermediate.Attack of the carbanion intermediate on the carbonyl carbon of the cyclopentanone, forming a tetrahedral intermediate.Deprotonation of the intermediate by a base such as sodium hydroxide (NaOH) to form the aldol product.Dehydration of the aldol product forms the final product, which is a conjugated enone. This step is typically carried out by heating the mixture in the presence of an acid catalyst such as sulfuric acid (H2SO4).Learn more about Aldol Condensation here: brainly.com/question/27178362
#SPJ4
What is the percent composition of a compound formed when 4.96 g of bromine combines with lithium to form 5.39 g of lithium bromide?
The mass of lithium required to react with 4.96 g of bromine is 0.372 g. The number of moles of each reactant is 0.062. Therefore the percentage composition of each element in the product is 50%.
What is percentage composition?The percentage composition of a compound is the weight percentage of each element present in the compound contributing to the total weight of the compound.
The reaction between lithium and bromine gas is given below:
[tex]\rm Br_{2} + 2 Li \rightarrow 2LiBr[/tex]
As per this reaction one mole bromine gas reacts with 2 moles of Li.
mass of Br₂ = 160 g/mol
mass of Li = 6 g/mol
for 2 Li = 12 g/mol
160 g of Br reacts with 12 g of Li. Thus, mass of Li required by 4.96 g of bromine gas is:
4.96 × 12 / 160 = 0.372 g.
The number of moles of Br = 4.96/ 80 = 0.062
no. of moles of Li = 0.372 / 6 = 0.062
The number of moles of each element is equal and hence, the percentage composition is 50 % each of Li and Br.
To find more on LiBr, refer here:
https://brainly.com/question/7256732
#SPJ1
Bromine makes up 92.1% of the compound, while the remaining 7.9% is made up of lithium.
What is percent composition?Percent composition is a way of expressing the proportion of each element in a compound as a percentage of the total weight of the compound.
To find the percent composition of an element in a compound, divide the weight of the element in the compound by the total weight of the compound, and then multiply by 100%.
In this case, the weight of bromine in the compound is 4.96 g, and the total weight of the compound is 5.39 g. Therefore, the percent composition of bromine in the compound is:
[tex](4.96 g / 5.39 g) * 100% = 92.1%[/tex]
This means that bromine makes up 92.1% of the compound, while the remaining 7.9% is made up of lithium.
Learn more about percent composition, here:
https://brainly.com/question/17505281
#SPJ1
The shielding effects help to explain:
why it is easier to take electrons from higher energy levels (these are larger atoms)
why it is easier to take electrons from smaller atoms
why it is harder to take electrons from higher energy levels (these are larger atoms)
The shielding effects help to explain why it is easier to take electrons from smaller atoms. Due to the fact that as the shielding effect increases, the ionization energy decreases.
what is shielding effects?
The shielding effect looks at how electrons closer to the nucleus tries to shield the electrons farther away from the positive charge of the nucleus which is the reduction in the effective nuclear charge on the electron cloud, as a result of difference in the attractive force.
what is electron shielding?
In a simple term Electron shielding is described as the blocking of valence shell electron attraction by the nucleus, which is as a result of the presence of inner-shell electrons.
learn more about shielding effect here:
brainly.com/question/25950742
#SPJ1
a liquid is in equilibrium with its vapor. if some of the vapor is allowed to escape, what effect, if any, is there on the condensation or vaporization rate?
When some of the vapor is allowed to escape, the pressure of the vapor will decrease, resulting in a decrease in the rate of condensation.
This is because the vapor pressure is directly proportional to the rate of condensation. Since the pressure of the vapor is lower, it is less likely for the molecules to collide and condense.
Furthermore, the rate of vaporization will increase since the pressure inside the container is lower. This is because when the pressure is lower, the molecules require less energy to escape the liquid, thus increasing the rate of vaporization.
For more questions like Condensation click the link below:
https://brainly.com/question/15563071
#SPJ4
The condensation rate will initially be higher than the vaporization rate.
When a liquid is in equilibrium with its vapor and some of the vapor is allowed to escape, the condensation rate will initially be higher than the vaporization rate. This is because the vapor pressure in the system has decreased due to the escape of some vapor.
To re-establish equilibrium, the liquid will increase its vaporization rate to produce more vapor. As the vaporization rate increases, it will eventually match the condensation rate again, and the system will return to equilibrium. So, initially, there is an effect on the condensation and vaporization rates, but the system will adjust to restore the equilibrium between the two rates.
Learn more about condensation: brainly.com/question/30629848
#SPJ11
According to the nemst equation, when ecell = 0 then: _______
(A) Q=K (B) K=1 (C) AG=0 (D) Ecell = 0
According to the Nerst equation, when Ecell = 0 then : A) Q = K, the nerst equation is then :
log Keq = (n E°) / (0.0592 V)
The Nerst equation is given as follows :
E cell = E°cell - (0.0592 V / n ) log Q
the electrical potential of the cell is depend on the Q, that reaction quotient of the reaction. at equilibrium ΔG = 0 . the reaction quotient Q = K and from the equation , ΔG = -nFE , ans E = 0, now the nerst equation is given as :
0 = E° - ( RT / nF ) ln K
0 = E° - ( 0.0592 V / n) log K
log K = (n E°) / (0.0592 V)
To learn more Ecell here
https://brainly.com/question/3807566
#SPJ4
Where are the valence electrons of neon?
Answer:
Neon Z=10
Explanation:
Neon has eight valence electrons, this closed she'll configuration makes neon supremely difficult to oxidized and difficult to reduce
the synthesis of ch3oh(g) from co(g) and h2(g) is represented by the equation above. the value of kc for the reaction at 483 k is 14.5. a mixture of co(g) and h2(g) is pumped into a previously evacuated 2.0 l reaction vessel. the total pressure of the reaction system is 1.2 atm at equilibrium. what will be the total equilibrium pressure of the system if the volume of the reaction vessel is reduced to 1.0 l at constant temperature? responses less than 1.2 atm less than 1.2 atm greater than 1.2 atm but less than 2.4 atm greater than 1.2 atm but less than 2.4 atm 2.4 atm 2.4 atm greater than 2.4 atm
According to Boyle's law which is a law for constant temperature the the total equilibrium pressure of the system if the volume of the reaction vessel is reduced to 1.0 l is 2.4 atmospheres.
What is Boyle's law?Boyle's law is an experimental gas law which describes how the pressure of the gas decreases as the volume increases. It's statement can be stated as, the absolute pressure which is exerted by a given mass of an ideal gas is inversely proportional to its volume provided temperature and amount of gas remains unchanged.
Mathematically, it can be stated as,
P∝1/V or PV=K. The equation states that the product of of pressure and volume is constant for a given mass of gas and the equation holds true as long as temperature is maintained constant.
According to the equation the unknown pressure and volume of any one gas can be determined if two gases are to be considered.That is,
P₁V₁=P₂V₂
Substitution in above equation gives P₂=1.2×2/1=2.4 atmospheres.
Hence, the total equilibrium pressure of the system if the volume of the reaction vessel is reduced to 1.0 l is 2.4 atmospheres.
Learn more about Boyle's law,here:
https://brainly.com/question/1437490
#SPJ1
How many atoms are in MgO?
There are total 3 atoms in MgO, in which 1 atom is of Magnesium and 1 atom is of Oxygen.
Atom
An atom is a particle of matter that uniquely defines a chemical element. An atom consists of a central nucleus that is surrounded by one or more negatively charged electrons. The nucleus is positively charged and contains one or more relatively heavy particles known as protons and neutrons.
Nucleus
The nucleus is a positively charged region at the center of the atom. It consists of two types of subatomic particles packed tightly together.
The particles are protons, which have a positive electric charge, and neutrons, which are neutral in electric charge.
Learn more about atoms here :-
https://brainly.com/question/1566330
#SPJ4
Determine the bond angle for SiO2, BF3, CFCl3, H2CS, CBr4, H2CO, SC2, HB3.
the question ask is to Express your answer using three significant figures...???
thank you!
The bond angle for SiO2 is 120 degrees. The bond angle for BF3 is 120 degrees. The bond angle for CFCl3 is 120 degrees. The bond angle for H2CS is 120 degrees
Bond angle is defined as the relationship between two bonds, or the angle among two orbitals in a complex molecule or ion that contain bonding electron pairs. It is determined by calculating using a spectroscopic method and measured in degrees. The bond lengths in a molecule is the angle formed by three connected nuclei. Electron domains have distinctive angles and structures. A central atom with two electron density regions, for example, is regarded linear with an angle of 180°. More complex structures have multiple angles. Valence bond model says a bent geometry for the molecule of water with a bond angle of 90° because the 2 2p orbitals are at right angles to each other.
To learn more about Bond angle here:
https://brainly.com/question/13751116
#SPJ4
The chemical formula for hydrogen sulfide is H₂S. What is the mass of hydrogen in 150 g of
H₂S? (H = 1, S = 32)
The chemical formula for hydrogen sulfide is H₂S. The mass of hydrogen in 150 g of 141.2 g. Therefore, option A is correct.
What is mass ?A body's mass is an inherent quality. Prior to the discovery of the atom and particle physics, it was widely considered to be tied to the amount of matter in a physical body.
Simply put, mass is a measurement of a body's amount of matter. Matter is everything that has both volume and mass. Although mass cannot be seen, it can be measured or quantified. Not all matter is visible. Typically, mass is expressed in kilograms, etc.
Molar mass of H₂S
= 1 × 2 + 32
= 34
The mass of hydrogen in 150 g is 141.2 g.
Thus, option A is correct.
To learn more about the mass, follow the link;
https://brainly.com/question/19694949
#SPJ1
Kinetic energy can come from other sources of energy. True False
Answer:
True
Explanation:
Sources include renewable energy sources such as the sun, wind, water, and geothermal heat. However, we also use artificial sources generated by humans, such as walking, vehicle motion, and system vibration.
Hope it helps
What is the ratio of rms velocities of the molecules of two gases A and B?
The required ratio of rms velocities of the molecules of two gases A and B is 1:4.
What is Root mean square velocity of gas molecules?Root mean square (R.M.S.) speed of a gas is a square base of the normal of the square of speed. In that capacity, it has units of speed. R.M.S. = M3RT. where R = gas consistent, T = temperature (in K), M = molar mass of the gas.
According to question:
We have,
M1 = 16, M2 = 2, T1 = 200k, T2 = 400K
Vrms = root(3RT/M)
Here,
Va/Vb =[tex]\sqrt\frac{200*2}{16*400} }[/tex]
Va/Vb= 1:4
R is constant
Thus, Required ratio is 1:4
To know more about Root mean square velocity visit:
brainly.com/question/1954525
#SPJ4
Q. What is the ratio of rms velocities of the molecules of two gases A and B whose molecular weights are 400 and 200 gm/mol respectively?
Which Of The Following Is The Best Michael Acceptor?
Answer:
I don't know because there is no option !!
Does pewter keep drinks cold?
As a hardening agent, pewter is a tin-based alloy with varying quantities of antimony, bismuth, copper, and lead.
Describe pewter.As a hardening agent, pewter is a tin-based alloy with varying quantities of antimony, bismuth, copper, and lead.
Pewter drinkware maintains liquids at their ideal temperatures for a longer period of time, whether they are hot or cold. A Lovely And Enjoyable Lifetime.
Pewter drinkware maintains liquids at their ideal temperatures for a longer period of time, whether they are hot or cold.
Become familiar with pewter.
Visit
https://brainly.com/question/29627686
#SPJ4
Based on the differences in electronegativities, with which atom is francium (fr) most likely to form an ionic bond?
Answer: An ionic bond will be most likely formed between francium and chlorine having an electronegativity difference of 2.46.
Explanation:
How many magnesium atoms are in MgO?
MgO contains three atoms in total, of which one is Mg and one was O.
Therefore, MgO contains only 1 atom of magnesium.
A chemical element was uniquely defined by its atoms, which are tiny pieces of substance. An atom is made up of a core nucleus and one or even more electrons with negative charges that orbit it. The positively charged, comparatively hefty protons as well as neutrons that make up the nucleus may be present.
The positively charged nucleus is located in the middle of an atom. It must be composed of two types of closely grouped subatomic particles.
Protons, which possess a positive electric charge, as well as neutrons, that have no electric charge, are just particles.
Learn more about atoms here : -
https://brainly.com/question/13654549
#SPJ4
An atom's electron configuration ends with 3p2. If another atom has eight more electrons, what would be the continuation of the electron configuration?
Answer:
3p6 3d4
Explanation:
3d will come after 3p => 3p 3d
p will hold maximum of 6 electrons while d will hold maximum of 10 electrons.
if there are 8 more electrons to 3p2, then 4 will fill 3p so it will become 3p6
then the other 4 will fill 3d to become 3d4
What i the chief difference between two identical clay tile if one i hot and i cold
The chief difference between two identical clay tiles, if one is hot and one is cold, is in the amount of heat energy each contains.
Heat energy is a form of energy that is transferred from one object to another, and in this case, the hot tile contains more heat energy than the cold tile. Heat energy is transferred from one object to another through a process called conduction.
When one object is hotter than another, heat energy is transferred from the hotter object to the cooler object until both objects reach the same temperature. In the case of the two clay tiles, the hotter tile will transfer its heat energy to the cooler tile until the tiles reach the same temperature.
The amount of heat energy each tile has can also be measured. Heat energy is measured in joules, and the hotter tile will have a higher number of joules than the cooler tile. To measure the amount of heat energy each tile contains, a thermometer can be used, which will measure the temperature of each tile and then calculate the amount of heat energy each tile contains.
Learn more about conduction at : https://brainly.com/question/12136944
#SPJ4
QUESTION 39 CH3CO2H is called acetic acid. The name implies that
O a. It does not react with either acids or bases.
O b. It can donate an H+ ion to a base, and forms CH3CO2-
O c. It can react with acids, but does not react with bases.
O d. It can accept an H+ ion from a base, and forms CH3CO2H2+
O e. It can donate an electron to a base, and forms CH3CO2H+
Option B. Acetic acid has the formula C2H4O2. In order to distinguish it from its isomers, it is frequently written with CH3CO2.
Then, is CH3COOH a base or an acid. Because the ions in CH 3 COOH do not fully ionise to release H + ions when they are dissolved in water, it is a weak acid. As a result, there are less hydrogen ions in the acetic acid's final solution, which ultimately results in a weak acid.
Since CH3COOH does not release any OH- ions when dissolved in water, it is not an Arrhenius base. According to the Bronsted-Lowry theory for bases, a base is defined as a chemical that absorbs the proton from other molecules and uses it to form a conjugate acid.
To learn more about Acetic acid please click on below link
https://brainly.com/question/15202177
#SPJ4
What kind of software is available for assessing the carbon footprint?
There are several types of software available for assessing the carbon footprint of a company, organization, or individual. These tools can help users track their GHG emissions and set reduction targets.
Carbon footprint calculators: These tools allow users to estimate their GHG emissions by entering information about their energy use, transportation, waste, and other relevant factors. Some calculators are specific to a particular sector or industry, while others are more general.Carbon accounting software: This type of software helps users track their GHG emissions over time and set reduction targets. It may include features such as data management, reporting, and verification.Life cycle assessment (LCA) software: LCA software is used to assess the environmental impacts of a product or service from raw material extraction to disposal. It can be used to quantify GHG emissions at different stages of a product's life cycle.Supply chain software: This type of software is used to track the environmental impacts of a company's supply chain, including GHG emissions. It may include features such as data management, reporting, and supplier assessment.Learn more about carbon footprint here:
https://brainly.com/question/282900
#SPJ4
Why do we calculate rms velocity?
The explanation we utilize the rms velocity rather than the normal is that for a commonplace gas test the typical speed is zero since the particles are moving every which way.
What is rms velocity?Root mean square (RMS) velocity is the square base of the amount of the squares of the stack speed values partitioned by the quantity of values. RMS speed is the speed of a wave going through underground developments at various span speeds along a given beam way.
For flat or marginally inclined layers, NMO and stacking speed are equivalent to RMS speed. In any case, in regions with huge parallel speed varieties, the stack velocity contrasts essentially from the RMS speed.
Conduction is the minuscule temperature inclination of the root-mean-square speed of issue. This substance can be either strong, fluid, or gas.
The explanation we utilize the rms velocity rather than the normal is that for a regular gas test the typical speed is zero since the particles are moving every which way.
To know more about rms velocity, visit:
brainly.com/question/29605566
#SPJ4
1. define mixtures with examples.
2. mentions the types of mixtures, define them and give 2 examples for each (Include colloids and suspensions too).
1) Mixtures involves substances that are mixed together.
2) Colloids , suspensions and solutions are types of mixtures.
What is a mixture?We know that the term mixture can be used to describe any two substances that are not chemically combined together. In other words, the term mixture has to do with the putting together of substances that would not lead to any change in the individual properties of the substances that have been mixed together. Two common examples of mixtures are blood and air.
There are various types of mixtures that we have and these include;
Solutions: A solution is a mixture because there is no interaction that is going on chemically between the solute and the solvent.
Colloid: A colloid is a kind of mixture that is made up solutes that can still be seen with the optical eye. That is, the solutes are still large enough
Suspension: A suspension is a kind of mixture in which a solute is scattered in the solvent.
Learn more about mixtures:https://brainly.com/question/24898889
#SPJ1
What reaction does a vitamin KH2-dependent enzyme catalyze? View Available Hint(s)
O It decarboxylates the y-carbon of a glutamate side chain.
O It carboxylates the y-carbon of an aspartate side chain.
O It carboxylates the ycarbon of a glutamate side chain.
O It carboxylates the ycarbon of a glutamine side chain.
O It carboxylates the P-carbon of a glutamate side chain.
Submit PartQ CoASH is used to activate carboxylic acids. What type of compound is formed between CoASH and a carboxylic acid? View Available Hint(s)
O anhydride
O thioether
O amide
O thioester
O mixed anhydride with phosphate
Submit ▼ Part H What role does ATP play in biotin-dependent enzymes?
O It puts a good leaving group on bicarbonate.
O It provides a strong base.
O It provides a strong nucleophile.
O It delocalizes electrons It reduces bicarbonate.
Submit Request Answer Part F TPP is the coenzyme required by pyruvate decarboxylase. What product is formed in that reaction? View Avallable Hint(s)
O acetaldehyde
O butanal
O formaldehyde
O acetone
O propanal
Submit
The glutamate side chain's gamma carbon is carboxylated by Q1, a vitamin KH2 dependent enzyme, and Q2. A thioester is created when carboxylic acid and coASH interact.
Thioesters are organosulfur compounds having the functional group RSC(=O)R'. By virtue of the thio- prefix, they are implied to be comparable to carboxylate esters (ROC(=O)R'), with the sulphur in the thioester acting as the linking oxygen in the carboxylate ester. Thioesters play a crucial role in metabolism. A notable illustration of this is the metabolism of fatty acids. The main metabolite, acetyl coa, is an ester that is predominantly generated when pyruvate undergoes oxidative decarboxylation or when B acids are broken down.
To learn more about carboxylic acid please click on below link
https://brainly.com/question/4721247
#SPJ4
Write Lewis structures for the following molecules or ions. (Assign lone pairs, radical electrons, and atomic charges where appropriate.)F2CNH
Lewis structures of F2CNH is F2 - C - N - H.
The octet rule is a theory that describes how atoms share electrons so that each atom has eight electrons in its outer shell. This idea. is the foundation. of a Lewis. structure. An oxygen. atom, has six electrons. in its outer. shell. The arrangement of the atoms or molecules is given structure by the Lewis Dot Structure, which is represented by a pattern of dots, lines, and atomic symbols. A single atom, a covalent molecule, or a polyatomic ion can all be given a Lewis Dot Structure. The bonding between a molecule's atoms and its lone pairs of electrons is depicted in Lewis structures, also called Lewis-dot diagrams. Lewis structures can be combined with hybrid models to predict molecular geometry.
Learn more about Lewis structures here:
https://brainly.com/question/20300458
#SPJ4