Answer:
A. change speed, direction, or both
Explanation:
hope this helps. . . <3
good luck! uwu
An element Argon has atomic number 18. Deduce the electronic configuration of the elements and suggest the group to which this element belong.
Answer:
8th or 0th group known as Noble gases
250 mL of argon gas is held in a flexible vessel shown above. If the pressure changes to 12.0 atm, what is the new volume of
the gas at 20 C?
The new volume of the gas at 20 °C is 205 mL
The correct answer to the question is Option C. 205 mL
From the question given, the following data were obtained:
Initial volume (V₁) = 250 mL
Initial temperature (T₁) = 25 °C = 25 + 273 = 298 K
Initial pressure (P₁) = 10 atm
Final temperature (T₂) = 20 °C = 20 + 273 = 293 K
Final pressure (P₂) = 12 atm
Final volume (V₂) =?The new volume of the gas can be obtained by using the combine gas equation as follow:
[tex] \frac{P_1V_1}{T_1} = \frac{P_2V_2}{T_2} \\ \\ \frac{10 \times 250}{298} = \frac{12 \times V_2}{293} \\ \\ cross \: multiply \\ \\ 298 \times 12 \times V_2 = 10 \times 250 \times 293 \\ \\ divide \: both \: side \: by \: 298 \times 12 \\ \\ V_2 = \frac{10 \times 250 \times 293}{298 \times 12} \\ \\ V_2 = 205 \: mL \\ [/tex]
Therefore, the new volume of gas is 205 mL
Learn more: https://brainly.com/question/25763809
Which chemical equation represents a redox reaction?
TiCl4(s) + 2H2O(g) – TiO2(s) + 4HCl(g)
--
CaO(s) + SiO2(s) – CaSiO3)
Fe2O3(s) + 2Al(s) — Al2O3(s) + 2Fe()
+
CaCO3(s) — Cao(s) + CO2(g)
Answer:
CaCO3 yields CaO + CO2
Exclamation
Since the Decomposition state of a redox involves a broken down compound, this equation proves that this is a DECOMPOSITION since it is being broken down.
14. Write a statement that makes a claim about arrangements of electrons and properties
within a family of elements.
i dont know
Explanation:
how many grams of magnesium cyanide would you need to add to 275 ml of water to make a 0.075 molal solution
The mass of magnesium cyanide needed to prepare the solution is 1.57 g
We'll begin by calculating the number of mole of Mg(CN)₂. This can be obtained as follow:
Volume = 275 mL = 275 / 1000 = 0.275 L
Molarity of Mg(CN)₂ = 0.075 M
Mole of Mg(CN)₂ =?Mole = Molarity x Volume
Mole of Mg(CN)₂ = 0.075 × 0.275
Mole of Mg(CN)₂ = 0.020625 mole
Finally, we shall determine the mass of Mg(CN)₂Mole of Mg(CN)₂ = 0.020625 mole
Molar mass of Mg(CN)₂ = 24 + 2(12 + 14) = 76 g/mol
Mass of Mg(CN)₂ =?Mass = mole × molar mass
Mass of Mg(CN)₂ = 0.020625 × 76
Mass of Mg(CN)₂ = 1.57 g
Therefore, 1.57 g of Mg(CN)₂ is needed to prepare the solution
Learn more: https://brainly.com/question/3126258
I have to answer questions about science
Answer:
What Questions?
Explanation:
What Questions?
Answer:
Explanation:
What is the Questions frist ?
I need help with one paragraph. (About the image)
Answer:
hi im just trying to get points lol hope u got ur answer
Explanation:
Given that E°red = -0.40 V for Cd2+/Cd at 25°C, find E° and E for the concentration cell expressed using shorthand notation below.
Cd(s) ∣ Cd2+(1.0 × 10-5 M) ∣∣ Cd2+(0.100 M) ∣ Cd(s)
E° = 0.00 V and E = +0.12 V
E° = 0.00 V and E = +0.24 V
E° = -0.40 V and E = -0.16 V
E° = -0.40 V and E = -0.28 V
From the information in the question, the E° and E for the cell is 0.00 V and 0.12 V.
Using the Nernst equation;
Ecell = E°cell - 0.0592/n log Q
We know that E°cell = 0.00 V since the anode and cathode are both made up of cadmium.
Substituting the given values into the Nernst equation;
Ecell = 0.00 V - 0.0592/2 log (1.0 × 10-5 M/0.100 M)
Ecell = 0.00 V - 0.0296 log(1 × 10^-4)
Ecell = 0.12 V
Learn more: https://brainly.com/question/8646601
elements are organized on the periodic table according to
Answer:
atomic number
Explanation:
The periodic table is a table that lists all of the chemical elements in order of atomic number, starting with hydrogen and ending with oganesson. The number of protons in the nucleus of an atom of a certain element is its atomic number.
Have a good day :)
Infrared waves travel at a speed of 3.00 x 10^8 m/s. What is the frequency of an infrared wave
that has a vacuum wavelength of 5.5 micrometers?
(1 micrometer= 1x10^-6 m)
O 5.5 X 10^12 Hz
O 5.5 x 10^10 Hz
O 5.5 X 10^11 Hz
O 5.5 X 10^13 Hz
The frequency of the infrared wave at the given speed and wavelength is [tex]5.5 \times 10^{13} \ Hz[/tex].
The given parameters;
speed of the wave, v = 3 x 10⁸ m/swavelength of the wave, λ = 5.5 μmThe frequency of the infrared wave is calculated by using wave equation as shown below;
v = fλ
where;
f is the frequency of the wave[tex]f = \frac{v}{\lambda} \\\\f = \frac{3\times 10^8}{5.5 \times 10^{-6}} \\\\f = 5.5 \times 10^{13} \ Hz[/tex]
Thus, the frequency of the infrared wave at the given speed and wavelength is [tex]5.5 \times 10^{13} \ Hz[/tex].
Learn more here:https://brainly.com/question/18477700
Explain why photosynthesis is essential for living plants and animals.
How does vapor pressure affect intermolecular forces.
Answer:
it is directly related to the intermolecular forces present between its molecules
The coefficients in a balanced chemical equation directly represent moles of reacting substances. true or false
The statement "The coefficients in a balanced chemical equation directly represent moles of reacting substances." is true.
What is a balanced equation?A balanced equation is one in which there is an equal number of atoms present on both sides of the reaction. When the atoms of elements in the reaction equal the atoms of elements or compounds in the products. The number of moles is similar before and after the reaction.
The chemical equation is the mathematical representation of any reaction, the number written on the front of the element or compound represents the number of atoms of the element present in the reaction. These numbers are called the coefficient of the chemical equation.
Thus, the statement is true, because the coefficients tell the mole of reacting substance.
Learn more about a balanced equation, here:
https://brainly.com/question/2777822
#SPJ2
NaCl express your answer as an Ion
Does anyone know what the answer for this would be
Answer:
iconic compound
Explanation:
T or F: Lone pairs around the oxygen atom of a water molecule play no role in determining its molecular geometry?
Answer:
Explanation:
They play a very important part. The geometry is not a straight line. It is an angle over 90 which means that the molecule has the same general shape as a boomerang. The two hydrogens and the 2 lone electron pairs try to get away as far as possible from each other. The actual shape results in a tetrahedron shape. But the two hydrogens and 1 oxygen actually look like the aforementioned boomerang.
What would the chemical formula be if Calcium and Phosphorus formed an ionic bond?
Answer:
It will be Ca3P2.
Explanation:
If i initially have a gas with a pressure of 84 kpa and a temperature of 350 c and i heat it an additional 230 degrees, what will the new pressure be? assume the volume of the container is constant.
Answer:
67.824
Explanation: You want to use the combined gas law equation (P1*V1)/(n1*T1)=(P2*V2)/(n2*T2). So first cross out what remains constant, so volume(V) and I assume moles (since it was not mentioned as a change). Then you can solve algebraically for the answer!
Hope this helped!
The new pressure will be 139.2 kpa .
What is the combined Gas Law?According to combined gas law,
[tex]\rm\dfrac{PV}{nT} = R[/tex]
In the Combined Gas Law,if we change either one of the variables the others will also change.
When the moles of the gas is constant , the above equation can be written as ,
[tex]\rm \dfrac{P'V'}{T'}= \dfrac{PV}{T}[/tex]
Given is P = 84kpa , T= 350⁰ C and T' = 350+230=580⁰ C , V=V' , P'=?
So we will substitute the values in the above formula keeping volume constant.
[tex]\rm \dfrac{P'}{T'}= \dfrac{P}{T}[/tex]
[tex]\rm\dfrac{P'}{580}= \dfrac{84}{350}[/tex]
[tex]\rm P' = \dfrac{84\times 580}{350}[/tex]
[tex]\rm P'= 139.2 \;kpa[/tex]
Therefore the new pressure will be 139.2 kpa .
To know more about Combined Gas Law:
https://brainly.com/question/13154969
#SPJ2
An alpha particle is equivalent to the nucleus of an atom of which element?(1 point)
A hydrogen
B helium
C nitrogen
D carbon
ill mark brainliest!!!
Answer: An alpha-particle is identical to the nucleus of a normal (atomic mass four) helium atom i.e. a doubly ionised helium atom. Alpha particles (also termed alpha radiation or alpha rays) was the first nuclear radiation to be discovered, beta particles and gamma rays were identified soon after.
Answer: D. Carbon
Explanation: Because I said so.
Hope this helps.
The flow of current is always in what direction
Answer:
The direction of an electric current is by convention the direction in which a positive charge would move. Thus, the current in the external circuit is directed away from the positive terminal and toward the negative terminal of the battery.
Explanation:
Answer:
Electrons always flow in opposite directions. The direction of an electric current is by convention the direction in which a positive charge would move. Electric current flows from higher electric potential to lower electric potential.
Explanation:
what is the difference in chemical energy between organic and inorganic materials?
Answer:
the difference is the presence of a carbon atom
Explanation:
Nitric acid reacts with zinc oxide.
State the names of the products of this reaction.
……………..and ....……..
Answer:
Zinc reacts with concentrated Nitric acid to produce Zinc nitrate, nitrogen dioxide and water.
That's all I know, sorry if it isnt coplete or the answer you wher looking for.
What physical change happens to atoms and molecules in a solution that is strongly heated in a flame? Is there a phase change? If so, what is it?
When atoms and molecules speed up or slow down, that is a physical change. When they change state from liquid to solid or from gas to liquid, that is a physical change. ... The ions or molecules can still come back together to form the original substance
The physical change which happens to atoms and molecules in a solution that is strongly heated in a flame is;
The atoms and molecules gain energy and their internal energy is increased.If the heat energy is sufficient, there is a phase change and this phase change is from liquid to gas (evaporation).Heating and Phase changesAtoms and molecules which are units of matter when strongly heated in a flame have increased internal energy and would undergo a phase change to a more energetic state of matter which is the gaseous state.
As such, the physical change that occurs in them is. increased internal energy.
Read more on heating and Phase change;
https://brainly.com/question/12168850
Help please I promise this time I will mark whoever answers correctly first please
10 grams
mass does not change when cooking the egg
What is the function of tendons?
Answer:
A tendon is a fibrous connective tissue that attaches muscle to bone. Tendons may also attach muscles to structures such as the eyeball. A tendon serves to move the bone or structure.
Explanation:
which of the following molecules can form hydrogen bonds with others like it?
Answer:
nitrogen, oxygen and fluorine
A sample of gas is at 78.0 oC. You want to change the volume of the gas from 1.60 L to 0.425 L under constant pressure. What must you do to the temperature of the gas
Answer:
the rule is V1/T1= V2/T2
so we convert the T1 from °c to kelvin
78+273.15= 351.15 k
1.60/351.15 = 0.425/T2
4.55 ×10-³ = 0.425/T2
then T2 = 93.40 kelvin
hence, we should decrease the temperature
Which of the following would make a solution
A. Sand in water
B. Oil in water
C. lee in water
O D. Sugar in water
no links plz!!
CaOCl2 parent acid and base???
Answer:
this is not and reaction of acid and base.(CaOCL2)
Explanation:
Ca2, Cl, are base and O is a neutral.
so how can that be a acid and base reaction
blank are produced when atoms if the elements in group 7A blank an electron
Answer:
Halide ions are produced when atoms of elements in Group 7A gain an electron.
Explanation:
ROUND FINAL ANSWER TO 2 DECIMAL PLACES AND DO NOT INCLUDE A UNIT 675 mL of a gas at a pressure of 1.5atm is compressed to 345 mL. What is the new pressure of the gas?
This problem is providing the initial volume and pressure of a gas as 675 mL and 1.5 atm and then mentions the final volume as 345 mL and asks for the new pressure of the gas.
Thus, we start off this problem by recalling the concept of Boyle's law as an inversely proportional relationship between pressure and volume:
[tex]P_1V_1=P_2V_2[/tex]
In which we solve for the final pressure, [tex]P_2[/tex] as shown below:
[tex]P_2=\frac{P_1V_1}{V_2} \\\\\\P_2=\frac{675mL*1.5atm}{345mL} \\\\\\P_2=2.93atm[/tex]
Considering we had to cancel out the milliliters to obtain atm as units of pressure.
Learn more:
https://brainly.com/question/1437490