Answer:
B. H3PO
Explanation:
The pH, texture, reactivity, and conductivity should be seen while determining acid or base. Among given option, H₃PO₄ is the acid when dissolved in water.
What are acid and base?Acid is a substance that has sour taste, pH lies in the range of 0-7 and give hydronium ion when dissolved in water. Acid turns blue litmus red. Whereas base has bitter, its pH is between 7-14 and it turns red litmus blue. It give hydroxide ion when dissolved in water.
Extensive properties, such as mass and volume depend on the amount of substance present and are not useful in the identification of a substance. Measuring mass and volume is not useful While determining acid or base. Out of given compounds, H₃PO₄ is the acid when dissolved in water.
Therefore, H₃PO₄ is the acid when dissolved in water.
To learn more about acid and base, here:
https://brainly.com/question/3941445
#SPJ5
Write two sentences explaining how the illustration and student observations support the cell theory?
Answer:
The classical cell theory was proposed by Theodor Schwann in 1839. There are three parts to this theory.
Explanation:
What is the charge on an atom after it gains two electrons during the formation of a bond?
One positive charge
Two positive charges
Two negative charges
One negative charge
Answer:
Two Negative Charges
Explanation:
C. Two negative charges
If an atom has an equal number of protons and electrons, its net charge is 0. If it gains an extra electron, it becomes negatively charged and is known as an anion. If it loses an electron, it becomes positively charged and is known as a cation.Given condition: An atom gains two electrons during the formation of a bond.
As we know gaining an electron results in a negative charge and here two electrons being gained.
Therefore, the charge on it after gaining two electrons will be two negative charges.
Thus, the correct option is option C.
Learn more:
brainly.com/question/7722404
Calculate the following quantity: volume of 1.58 M calcium chloride that must be diluted with water
to prepare 994 mL of a 6.20 x 10^-2 M chloride ion solution.
X-rays are often used in medical settings to create images of the body's internal structures such as bones. This is made possible by the
fact that X-rays are able to pass through the body's softer tissues without being absorbed.
Radio waves are also able to pass through the body's softer tissues without being absorbed. Why are radio waves not used to generate
medical images?
OA. The electrons in most atoms are not in high enough energy states to absorb the photons of radio waves.
OB. Radio waves tend to bend too much when they encounter solid materials to be used for generating accurate images,
OC
The frequency of most radio waves is too low to allow them to pass through bones or other solid materials.
OD.
Radio waves carry so little energy that they tend to pass through most atoms without an interaction taking place.
Answer:D
Explanation:I did it on study island.
Radio waves are not used to generate medical images because as per the electromagnetic spectrum ,the radio waves carry little energy that they pass through most atoms without interaction.
What is an electromagnetic spectrum?The electromagnetic spectrum consists of radiation which consists of waves made up of electromagnetic field which are capable of propogating through space and carry the radiant electromagnetic energy.
The radiation are composed of electromagnetic waves which are synchronized oscillations of electric and magnetic fields . They are created due to change which is periodic in electric as well as magnetic fields.
In vacuum ,all the electromagnetic waves travel at the same speed that is with the speed of air.The position of an electromagnetic wave in an electromagnetic spectrum is characterized by it's frequency or wavelength.They are emitted by electrically charged particles which undergo acceleration and subsequently interact with other charged particles.
Learn more about electromagnetic spectrum,here:
https://brainly.com/question/15576247
#SPJ2
What electrically neutral atom has 30 neutrons and 25 electrons?
Answer:
Manganese (Mn)
Explanation:
We know it's manganese because we are told it is an electrically neutral atom. This means it has the same number of protons and electrons. If it has 25 electrons, it has 25 protons. Protons tell us the atomic number of the atom, which also tells us the name of the element. Manganese is element 25 on the periodic table.
What is the ratio of potassium atoms to oxygen atoms in potassium oxide (K2O)?
K20
K = 1+
0 = 2-
K/0 = 1/2
the answer is K:O = 1:2
How many neutrons does the isotope of hydrogen called
deuterium have?
a. four
b. three
C. one
d. two
1.For Structure B the bond between carbon and sulfur is polar or non polar
2. Explain you’re answer
Answer:
polar
Explanation:
because carbon and sulfur have different electronegativities, the S=C bond is polar.
The entire molecule is nonpolar however because the dipoles (polar bonds) cancel out due to the geometry of the molecule (linear)
Calculate Kb for a 0.1 M solution of cyanide ion, given that Ka for hydrocyanic acid is 6.2 x 10â10.a) 8.4 x 10â9b) 7.87 x 10â3c) 1.34 x 10â3d) 1.8 x 105e) 7.87 x 10â6f) 1.61 x 10â5g) 7.4 x 10â8
Answer:
Kb = 1.6 × 10⁻⁵
Explanation:
Step 1: Given data
Acid dissociation constant of hydrocyanic acid (Ka): 6.2 × 10⁻¹⁰
Concentration of cyanide ion (Cb): 0.1 M
Step 2: Calculate the basic dissociation constant (Kb) of cyanide ion
We have the Ka of HCN. We can calculate the Kb of its conjugate base using the following expression.
Ka × Kb = Kw = 1.0 × 10⁻¹⁴
Kb = 1.0 × 10⁻¹⁴/Ka
Kb = 1.0 × 10⁻¹⁴/6.2 × 10⁻¹⁰
Kb = 1.6 × 10⁻⁵
The Kb for a 0.1 M solution of cyanide ion is :
- 1.6 × 10⁻⁵
Base dissociation constantGiven:
Acid dissociation constant of hydrocyanic acid (Ka)= 6.2 × 10⁻¹⁰
Concentration of cyanide ion (Cb)= 0.1 M
Base dissociation constant (kb)=?
Ka × Kb = Kw = 1.0 × 10⁻¹⁴
Kb = 1.0 × 10⁻¹⁴/Ka
Kb = 1.0 × 10⁻¹⁴/6.2 × 10⁻¹⁰
Kb = 1.6 × 10⁻⁵
Learn more about " Kb":
https://brainly.com/question/26871012?referrer=searchResults
PLZ HELP ME NO WRONG ANSWERS
Answer:
okay I will help you just message me johnpatrick on messenger
What is the hydroxide concentration of a solution with a poH of 2? Is this solution acidic, basic or neutral?
Name and write one polyatomic ion with its charge.
Answer:
Because these ions contain more than one atom, they are called polyatomic ions. Polyatomic ions have characteristic formulas, names, and charges that should be memorized. For example, NO3− is the nitrate ion; it has one nitrogen atom and three oxygen atoms and an overall 1− charge.
Polyatomic Ions.
Name Formula
sulfite ion SO32−
Explanation:
Which of the following are fair conductors and are always solid at room temperature?
1.Metals
2.Nonmetals
3.Metalloids
4.Ions
Answer:
Metalloids and ions
Explanation:
Mercury is not solid at room temperature. (Metals)
Many nonmetals aren't good at conducting electricity. Oxygen for example. (Nonmetals)
Metalloids are always solid at room temp and are fair conductors. (Metalloids)
Ions are same as metalloids. (Ions)
PLS GIVE BRAINLIEST
Select the best answer from the choices below. Light has many properties of waves, but sometimes it also behaves like:
Answer:
A photon
Explanation:
When electrons pass close to the standing wave of light, they hit the particles that are called photons
Which units can be used to describe the thermal
energy within a substance?
Answer: Btu, British Thermal Unit is used to express thermal energy when working in pounds and degrees Farenheit.
Calories are used when working in grams and degrees Centigrade or Kelvin (SI units)
A Joule is the British system unit used to measure heat transfer.
Explanation:
Perform the arithmic shown AND round your answers to the correct number of significant digits.
56.5in + 95.3in + 15 in
(Fill in the blank)
Answer:
167in
Explanation:
Given arithmetic;
56.5in + 95.3in + 15in
To determine the correct significant digits, the sum cannot be more precise than the least precise value in the addition;
The least precise is 15in and it is in 2significant places;
56.5in
95.3in
+ 15 in
......................
166.8in
......................
The value is 167in
Select the correct answer. The perimeter of a rectangle is 42 inches. If the width of the rectangle is 6 inches, what is the length? A. 12 inches B. 15 inches C. 21 inches D. 40 inches
Answer:
15
I hope this helps
The balanced equation for the combustion of Hydrogen is:
2 H2 + O2 → 2H2O
How many moles of H2O will be formed from the complete reaction of 0.750 moles of O2?
0.375 mol
1.50 mol
2.67 mol
0.750 mol
Answer:
1.5 moles H₂O
General Formulas and Concepts:
Chemistry - Stoichiometry
Using Dimensional AnalysisExplanation:
Step 1: Define
RxN: 2H₂ + O₂ → 2H₂O
Given: 0.750 moles O₂
Step 2: Stoich
[tex]0.750 \ mol \ O_2(\frac{2 \ mol \ H_2O}{1 \ mol \ O_2} )[/tex] = 1.5 moles H₂O
Step 3: Check
We are given 3 sig figs.
Since our answer is 2 sig figs, we don't need to round.
Choose ALL the answers that apply.
Sound _____.
travels in transverse waves
requires a medium to travel through
travels most slowly through solids
speeds up when temperature is increased
is changed into electrical impulses by the cochlea
Answer:
Speeds up when temperature is increased and can travel through a solid
Explanation:
Which term best describes the materials that make up rocks?
sand left by erosion
compressed magma
a mixture of minerals
layers of lava
Answer:
is c a mixture of minerals
Explanation:
A buffer solution contains 0.0200 M acetic acid and 0.0200 M sodium acetate. What is the pH after 2.0 mmol of NaOH are added to 1.00 L of this buffer? pKa = 4.75 for acetic acid.
Answer:
The correct answer is 4.84
Explanation:
We use the Henderson Hasselbach's equation to calculate the pH of a buffer solution:
pH = pKa = log ( [conjugate base]/[weak acid])
In this case:
conjugate base: acetate ⇒ [conjugate base] = [acetate] = 0.0200 M
weak acid: acetic acid ⇒ [weak acid] = [acetic acid] = 0,0200 M
pH = pKa + log ([acetate]/[acetic acid])= pKa + log (0.0200 M/0.0200 M)
When a strong base- such as NaOH- is added, the acid reacts with OH⁻ to form the conjugate base. So, the conjugate base is increased while the acid is decreased. Thus, in 1 liter of solution we have:
acetate = (0,0200 mol/L x 1 L) + (2.0 mmol x 1 mol/1000 mmol) = 0.022 mol
acetic acid= (0,0200 mol/L x 1 L) - (2.0 mmol x 1 mol/1000 mmol) = 0.018 mol
Finally, we calculate the pH:
pH = 4.75 + log (0.022 mol /0.018 mol )= 4.84
Buffer has been the solution that resists the change in the pH of the solution with the addition of acid or base. The pH of buffer with NaOH has been 4.84.
What is pH?The pH has been the hydrogen ion concentration in the solution. The pH has been equivalent to pKa and can be given as:
[tex]\rm pka=log\dfrac{[base]}{[acid]}[/tex]
The base in the buffer has been the acetate, while acetic acid act as the acid.
The concentration of NaOH added to the solution has been given as:
[tex]\rm Molarity=\dfrac{moles}{volume}\\\\ NaOH=\dfrac{0.002\;mol}{1\;L}\\\\ NaOH=0.002\;M[/tex]
The addition of NaOH adds the concentration of base, and neutralization reduces the concentration of acid. Thus, the new pKa can be given as:
[tex]\rm pKa=log\dfrac{0.2+0.002}{0.2-0.002} \\pKa=log\dfrac{0.022}{0.018}[/tex]
The new pH of the solution has been the sum of the old and the new pKa value.
Thus, the pH of the new buffer has been given as:
[tex]\rm pH=4.75+log\dfrac{0.022}{0.018}\\ pH=4.84[/tex]
The pH of buffer with NaOH has been 4.84.
Learn more about buffer, here:
https://brainly.com/question/1423164
Why do some transition metals have multiple oxidation states?
Transition metals have multiple oxidation states because of their
sublevel.
Answer:
Transition metals can have multiple oxidation states because of their electrons. The transition metals have several electrons with similar energies, so one or all of them can be removed, depending the circumstances. This results in different oxidation states.
Answer:
The answers are "partially filled" and "d" on Plato
Explanation:
If Phosphorus, P, gained 3 electrons, the net ion charge would be
+5
-5
+3
-3
Answer:
-3
Explanation:
Phosphorus becomes phosphide with a -3 charge
plz help ❤️
Explain how the pH of water has a synergistic relationship with other substances.
Provide an example.
Answer:
Explanation:
he pH of the water will determine the toxic effects, if any, of these substances.
Pure water is neutral with the pH of 7. But when water combines with other substance the pH varies as per the acidity of the combining substance.
What is pH?pH is the measure of acidity of a solution and mathematically it is the negative logarithm of hydrogen ion concentration. Acidic substance have a pH of less than 7 whereas, basic substance have higher pH value.
Water when combines with some acids, its acidity increases. For example acid rain resulting from the reaction of rain water with oxides of nitrogen and Sulphur forming nitric acid and sulphuric acid.
pH of water have a role in the toxic effects of components in water pH and alkalinity of water determines the coagulation of other substances in water.
Hence, the properties of other substance in water is pH dependent and might effect the alkalinity or acidity of water as well the properties of substances in water such as toxicity.
To learn more about pH , refer the link below:
https://brainly.com/question/2288405
#SPJ2
In the image below if the frisbee represents lights, what does the fence represent?
Answer:
The atmosphere
Explanation:
It reflects and traps the light outside of the Earth's Atmosphere?
I think, hope i helped.
A solution of NaF is added dropwise to a solution that is 0.0173 M in Ba 2. When the concentration of F- exceeds___M BaF2 will precipiate. Neglect volume changes. For BaF2
Answer:
0.0099M = [F⁻]
Explanation:
For BaF2, Ksp = 1.7x10⁻⁶
When BaF₂ is in solution, the equilibrium between the solid and the dissociated ions occurs as follows:
BaF₂(s) ⇄ Ba²⁺(aq) + 2F⁻(aq)
Where Ksp = 1.7x10⁻⁶ is defined as:
1.7x10⁻⁶ = [Ba²⁺] [F⁻]²
Where [] are equilibrium concentrations of each ion in solution.
That means you will add F⁻ until its concentration exceeds:
1.7x10⁻⁶ = [0.0173] [F⁻]²
9.827x10⁻⁵ = [F⁻]²
0.0099M = [F⁻]When more F⁻ is added, BaF₂ begins its precipitation.
How many moles of CO are produced when 1.8 moles C reacts?
Express your answer using two significat figures.
5C(s) + 2SO2(g) => CS2(l) +4CO(g)
Answer:
1.44mole of CO
Explanation:
The reaction equation is given as:
5C + 2SO₂ → CS₂ + 4CO
We check to see if the expression is balanced and it is so;
Now;
Given;
1.8mole of C reacted; how many moles of CO are produced;
From the balanced reaction equation:
5 mole of C is expected to produce 4 mole of CO
1.8 mole of C will then produce [tex]\frac{4 x 1.8}{5}[/tex] = 1.44mole of CO
what is the iupac name of CH3-CH2CH(CH3)CH2-COOH
Answer:
Butanoic acid.
Explanation:
Please help me it’s due today
Answer:
I think it is A. the two forces are equal, or balanced, neither the table nor the book moves up or down.
Explanation:
Tome, the other options don’t make no sense
22. Which of the following molecules or ions contain polar bonds?