Answer:
Definitely not. This is because the alkaline earth metal [basically group 2 elements] are reactive and will react with the contents of the can, contaminating it.
No, alkaline earth metals would not be a good replacement for tin in a tin can because alkali from alkaline earth metals react with tin and release hydrogen.
What are alkaline earth metals?Alkaline earth metals are present in group 2 of the periodic table. They are beryllium (Be), magnesium (Mg), calcium (Ca), strontium (Sr), barium (Ba), and radium (Ra).
They are called alkaline earth metals because their hydroxide and oxides are highly alkaline. Their metal oxides are found in the earth's crust.
These metals have 2 electrons in their outer shell, and they are highly reactive, so they will react with the tin in a tin can.
Thus, alkali from alkaline earth metals react with tin and generate hydrogen, hence they would not make an acceptable replacement for tin in a tin can.
To learn more about alkaline earth metal, refer to the below link:
https://brainly.com/question/23436350
#SPJ2
Write method of manufacturing of oxygen gas from liquid air
Answer:
cryogenic distillation process
Explanation:
Cryogenic distinction between carbohydrates and harmon process.
Read this sentence from Chapter One of Jack London’s The Call of the Wild.
Buck rushed at the splintering wood, sinking his teeth into it, surging and wrestling with it. Wherever the hatchet fell on the outside, he was there on the inside, snarling and growling, as furiously anxious to get out as the man in the red sweater was calmly intent on getting him out.
What is a good prediction question to ask after reading this excerpt?
Answer:
b)
Explanation:
It shows the natrual proggresion of a story and helps blend the narrtive together.
Answer:B
Explanation: i took the quiz on edge
Most weak bases are:
a. Anions of weak acids
b. Anions of strong acids
C.Cations of weak acids
d. Both A and C
Answer:
The conjugate base of a very weak acid is stronger than the conjugate base of a strong acid.
Explanation:
The stronger the acid, the weaker its conjugate base and vice versa A very weak acid has a very strong conjugate base.
how many grams are in 4.5 x 10^22 molecules of water
Answer:
1.35 g
Explanation:
water is h2o, so the molar mass is 1.01x2+16.00=18.02. divide 4.5 x 10^22 by 6.022 x 10^23 to get 7.5 x 10^-2 (2 sig figs). 18.02 x 7.5 x 10^-2 is 1.35 g
5. How many grams of calcium carbonate (CaCO3) are needed to maker 1 liter of 2-molar solution?
029
O 100.19
O 50.19
O 200.2g
Answer: Molar masses 40.8 and 100.1
Explanation:
What are some examples of a physical change? (list more than 2 examples)
If the temperature changes by 100 K, by how much does it change in degrees Celsius?
A. 0 degrees Celsius
B. 100 degrees Celsius
C. 37 degrees Celsius
D. 273 degrees Celsius
Taking into account the degrees Celsius and Kelvin, if the temperature changes by 100 K, by 100 degrees Celsius it change in degrees Celsius.
A degree Centigrade is a unit of temperature (the physical quantity that reveals the level of heat) whose symbol is °C.
On the other hand, the degree Kelvin, whose symbol is K, is the unit of temperature on the scale created by William Thomson Kelvin, in 1848, based on the degree Celsius, he established his zero point (0) at zero absolute (-273.15 ° C). The figure 0 K is equivalent to the theoretical point where gases have no volume. Absolute zero or 0 K is the point where molecules theoretically stop moving. It is the "perfect" cold.
Considering that zero on the Celsius or degrees centigrade (0 ° C) scale is defined as the equivalent of 273.15 K, the conversion from degrees ° C to K is carried out using the following expression:
T(K)= T(°C) + 273.15 K
In this case, if the temperature changes by 100 K, as it is a change in temperature, the numerical value in K units is the same in ° C units.
Then, the correct answer is option B. if the temperature changes by 100 K, by 100 degrees Celsius it change in degrees Celsius.
Learn more about degrees Celsius and Kelvin:
https://brainly.com/question/2800860?referrer=searchResults
12. Draw the dot diagram for a molecule of P2
[show your work and draw a box around your answer]
Explanation:
download the app topper
[tex]\rule{2000pt}{1000000pt}[/tex]
mamama
2. What do acidic solutions have high concentrations of?
Answer:
Explanation:
An acidic solution has a high concentration of hydrogen ions (H +start superscript, plus, end superscript), greater than that of pure wate
In one to two sentences, explain how to compare the strength of electrostatic forces between molecules in salt water to the strength of electrostatic forces between molecules in freshwater. Include a description of the data to be collected and how that data would allow one to draw conclusions about the relative strengths of the electrostatic forces in the two substances.
The boiling point of salt water is greater than that of fresh water hence the electrostatic forces between molecules in salt water is greater than that between the molecules in salt water.
Fresh water contains does not contain dissolved solutes like salt water. Salt water contains a lot of dissolved mineral salts making the salt water to be rich in ions.
Generally, the boiling points of substances can serve as a measure of the strength of electrostatic forces between molecules in either kind of water. We will easily find the that the boiling point of salt water is far higher than that of fresh water indicating greater electrostatic forces between molecules in salt water than between molecules in fresh water.
Learn more about boiling point: https://brainly.com/question/2153588
A solution containing 0.60 moles of sodium hydroxide is added to excess magnesium sulfate in solution. A white solid, magnesium hydroxide, is formed.
a) Write a balanced equation including the states of reactants and products.
b) write the name of the other product formed?
Explanation:
and then name of the other product will be sodium sulphate
how many fluid ounces can i take on a plane united
Which of the following giant covalent structures is a good conductor of electricity?
a) polythene
b) diamond
c) graphite
d) silicon dioixide
Oxygen is produced by the reaction of sodium peroxide, Na2O2 , and water.
2 Na2O2 (s) + 2 H2O(l) ---> O2(g) + 4 NaOH(aq)
Calculate the mass of Na2O2 in grams needed to form 5.20 g of oxygen.
Answer: 23.53g
Explanation:
5.2/(2x16) = 0.1625 mol
0.1625 x 2 = 0.325 mol
0.325 x (23 x 2 + 16 x 2) = 78 x 0.325 = 23.53g
Which elements are the most reactive and why?
Answer:
Fluorine is identified as the most reactive nonmetal and the most electro-negative element in the periodic table, making it the strongest oxidizing agent. Caesium is the most reactive metal in the periodic table, so much that working with this metal often ends in explosions!
Hydrogen is a very reactive gas, and the alkali metals are even more reactive. In fact, they are the most reactive metals and, along with the elements in group 17, are the most reactive of all elements.
Hope that helps.
look at the picture
Answer:
The strong electric force.
Explanation:
Trust me. If its wrong, comment on this, don't delete it. If someone else answers with the wrong question than other students might get the answer wrong. So if its right, say that it is, if its wrong, tell others what the real answer is.
What are the most of the elements in the periodic table
Answer:
Most of the elements in the periodic table are metals.
Hope that helps. x
Answer:
Here is your answer,mate!
Explanation:
Metals are the most of the elements in the periodic table.
PLEASEEE HELPPPPPPPPPPPPPPPPPP
A) Oxygen
B) water and oxygen
C) water and carbon dioxide
D) water and carbon monoxide
Answer:
A
Explanation:
this is because combustion is the chemical reaction between surfaces including OXYGEN to generate heat and light in the form of flame
Given the equation
N2(g) +3H2 (g)--> 2NH3 (g)
1 mole of N2 gas is needed to completely react with 3 moles of H2 gas.
How many molecules of H2 gas are needed?
Answer:
numbers of molecules = 3×6.023×10-23
Which of the following is true of grinding during
digestion?
A. The process of grinding is a physical change
that takes place in the mouth during digestion.
B. The process of grinding is a chemical change
that takes place in the mouth during digestion.
C. The process of grinding is a physical change
that takes place in the small intestine during
digestion
D. The process of grinding is a chemical change
that takes place in the small intestine during
digestion
The process of grinding is a physical change that takes place in the mouth during digestion.
GRINDING:Grinding is one of the processes that occur during the digestion of food molecules into simpler substances.
Grinding of food molecules occurs in the mouth with the aid of the teeth, which is used to chew.
However, the process of grinding is a physical change because it does not result into the formation of new substances or change the chemical constituents of the food.
Learn more about physical change at: https://brainly.com/question/1984022?referrer=searchResults
A glacier can travel over the surface of Earth and reshape it. The chart describes three things a glacier can do.
Glacial Actions:
1. breaks large rocks into smaller ones
2. pushes broken rocks ahead of itself
3. leaves broken rocks behind when the front edge melts
Which terms BEST describe these glacial actions in the order as presented?
a. weathering, erosion, deposition
b. erosion, chemical weathering, deposition
c. deposition, weathering, erosion
d. chemical weathering, mechanical weathering, erosion
Answer:
A
Explanation:
Two atoms of element Q mixed with element E
Both the elements combine together due to incomplete outermost shell.
Two atoms of element Q mixed with element E in order to achieve stability because both the elements have incomplete outermost shell which make them very reactive. In element E we can see that it has 7 electrons while on the other hand, element Q has 5 number of electrons.
For gaining stability, each element has to reach 8 electrons so that's why both the elements react with each other and get stability so we can conclude that both the elements combine together due to incomplete outermost shell.
Learn more about reaction here: https://brainly.com/question/11231920
Learn more: https://brainly.com/question/26045025
If a sample of gas at constant temperature has its pressure doubled, what will happen to its volume?
Answer:
it'll halve
Explanation:
the gas is compressed with twice the pressure. The volume will be halved.
im certain
Mendeleev's arrangement of the periodic table was in order of increasing ____.
A. atomic number
B. atomic mass
C. neutron number
D. valence electron number
Answer:
B. atomic mass
Explanation:
He arranged the elements into rows in order of increasing mass so that elements with similar properties were in the same column.
Silicone is a type of synthetic compound made of silicon, oxygen, and other elements. There are many different kinds of silicone. One kind is a liquid and is commonly used as a lubricant to reduce friction between moving parts. Unlike petroleum-based lubricants, silicone is nontoxic. However, silicone is more expensive than petroleum-based lubricants.
Which of the following would silicone lubricants most likely be used for?
Explanation:
Liquid-based lubricant
Answer:
study island : food service equipment
Explanation:
Which term describes the small, somewhat circular pattern of wind?
A Easterlies
B Trade Winds
C polar winds
D convection cells
Answer:
its D, convection cells
Given that the molar mass of NaCl is 58. 44 g/mol, what is the molarity of a solution that contains 87. 75 g of NaCl in 500. ML of solution? Use Molarity equals StartFraction moles of solute over liters of solution EndFraction. 0. 333 M 0. 751 M 1. 50 M 3. 00 M.
Answer:
D
Explanation:
Given that the molar mass of NaCl is 58.44 g/mol, we want to determine the molarity of a solution that contains 87.75 g of NaCl in 500. mL of solution.
Recall that molarity is given by:
[tex]\displaystyle \text{M} = \frac{\text{ mols solute}}{\text{ liters soln.}}[/tex]
Therefore, we can convert the amount of NaCl in the solution to moles of NaCl and the volume from milliliters to liters:
[tex]\displaystyle \begin{aligned} \text{M} & = \frac{(87.75 \text{ g NaCl})}{(500. \text{ mL soln.})} \cdot \frac{1 \text{ mol NaCl}}{58.44 \text{ g NaCl}} \cdot \frac{1000 \text{ mL soln.}}{1 \text{ L soln.}} \\ \\ & = 3.00\text{ } \frac{\text{mol NaCl}}{\text{ L soln.}} \\ \\ & = 3.00 \text{ M} \end{aligned}[/tex]
Hence, our answer is D.
What is a Chemical Properties and Physical Properties? Please tell me the deffinition of them both.
Answer:
All properties of matter are either physical or chemical properties and physical properties are either intensive or extensive. ... Physical properties can be measured without changing a substance's chemical identity. Chemical properties can be measured only by changing a substance's chemical identity.
Explanation:
PLEASE HELP ASAP I'M SO STRESSED
Answer:
160.3g
Explanation:
We know the equation:
No of moles = mass ÷ Mass of element
We need to find the mass, so make mass the subject of the formula.
Mass = No. of moles × mass of element
Mass = 5 × 32.06
Mass = 160.3g