Answer:
The physical properties of matter are those characteristics that can be measured without altering the atomic structure, while the chemical properties of matter are those characteristics that result in a change in the atomic structure.
6. A piece of solid gold was heated from 274K to 314K. 35.73 of energy was needed to raise the temperature.
What mass of gold was present?
From Q = mcΔT, we can rearrange the equation to solve for mass, m = Q/cΔT. The specific heat capacity, c, of solid gold is 0.129 J/g °C. I'm assuming that the energy is given in joules, as it's not specified in the question as written.
m = Q/cΔT = (35.73 J)/(0.129 J/g °C)(40.85 °C - 0.85°C)
m = 6.92 g of gold was present
The heat of the substance depends on the mass, specific heat, and temperature change of the system. The mass of gold that was present was, 6.92 g.
What is mass?Mass of the substance in the thermodynamic system is the ratio of the heat to the product of the specific heat and the temperature change. It is given as,
[tex]\rm m = \rm \dfrac{Q}{c \Delta T}[/tex]
Given,
Heat (Q) = 35.73 J
Specific heat (c) = 0.129 J/g °C
Temperature change = 40 degrees celsius
Mass of gold is calculated as:
35.73 ÷ (0.129) (40) = 6.92 gm
Therefore, 6.92 gms of gold is present.
Learn more about mass here:
https://brainly.com/question/15528502
#SPJ2
Why is it important to predict consequences when decision-making?
A.Considering the consequences can help you pick the option with the best outcome.
B.Predicting consequences isn’t a step in the decision-making process.
C.There usually aren’t any consequences when making decisions.
D.Consequences won’t help you make a decision.
Gas density can be calculated by dividing the mass of gas by its volume. If you took a balloon of gas and then warmed the balloon in a sunny window, what can now be said about the density of the gas in the balloon? Gas density can be calculated by dividing the mass of gas by its volume. If you took a balloon of gas and then warmed the balloon in a sunny window, what can now be said about the density of the gas in the balloon? The gas density will decrease. The gas density will remain the same. The gas density will increase. The density of gases is independent of temperature. none of the above
Answer: The density will decrease
Explanation: Heating a substance causes molecules to speed up and spread slightly further apart, occupying a larger volume that results in a decrease in density.
what's different between fat molecules and carbohydrate and protein molecules
Answer:
ddwadadadadwd
Explanation:
What is the best synonym for "alloy?"
A: nonmetal
B: mineral
C:blend
D:stone
A compound found in the athletes urine had a percent composition of 80.8% carbon, 8.97% hydrogen and 10.3% oxygen. What is the Empirical formula of the compound? What is the molecular formula of the compound if the molar mass of the compound is 312g/mol?
Answer:
C21H2802
Explanation:
C=12g/mol
H=1g/mol
O=16g/mol
Part (C) of compound-80.18%
(0.8018 x 312)/12=21
Part (H) of compound-8.97%
(0.897 x 312)/1=28
Part (O) of compund-10.3%
(0.103 x 312)/16 = 2
Therefore the emp. formula is C12H28O2
1. Pressures up to 3000 bar are measured with a dead-weight gauge. The piston diameter is 4 mm. What is the approximate mass in kg of the weights required
Answer:
The approximate mass of the weight required is 348.3 kg
Explanation:
The dimensions of the dead-weight gauge are;
The pressure up to which the dead-weight gauge measures, P = 3,000 bar
The diameter of the piston of the dead-weight gauge, D = 4 mm = 0.004 m
The dead-weight gauge pressure formula is given as follows;
Pressure, P = The weight applied, W ÷ The area the weight is applied, A
∴ The weight applied, W = P × A
Where;
P = Pressure
A = The area the weight is applied
W = The weight applied to the piston
The area the weight is applied, A = The area of the piston = π·D²/4
Where;
D = The diameter of the piston
∴ A = π × (0.004 m)²/4
When P = 3,00 bar, and A = π × (0.004 m)²/4, we have;
The weight applied, W = P × A
∴ W = 3,000 × π × (0.004 m)²/4 ≈ 3,769.9118 N
W ≈ 3,769.9118 N
W = m·g
Where;
m = The mass of weight
g = The acceleration due to gravity ≈ 9.81 m/s²
m = W/g
∴ m = 3,769.9118 N/(9.81 m/s²) ≈ 384.3 kg
The approximate mass of the weight required, m = 348.3 kg.
We started by Solving for the force and then the area of the piston, we then applied the formula for force using the constant for acceleration due to gravity and the mass was found to be 384.34 kg
Given Data
Pressure = 3000 bar
Diameter = 4mm
Let us convert bar to N/mm^2
1 bar = 0.1 N/mm^2
3000 bar = x N/mm^2
= 0.1*3000
= 300 N/mm^2
We know that pressure P = Force/Area
Let us find the area of the piston
Area = πd^2/4
Area = 3.142*4^2/4
Area = 3.142*16/4
Area = 50.272/4
Area = 12.568 mm^2
Let us find the force F
F = P*Area
F = 300*12.568
F = 3770.4 Newton
We know that Force = Mg
g = 9.81 m/s^2
Hence, m = F/g
m = 3770.4/9.81
m = 384.34 kg
Learn more about force here:
https://brainly.com/question/12970081
Number 8 plsssssssssss
Answer:
the correct answer is commensalism
How many moles of HCl can be neutralized by 0.1 liter of 0.5 M NaOH? A. 0.1 B. 0.05 C. 0.5 D. 0.4
Answer:
B. 0.05
Explanation:
The reaction that takes place is:
HCl + NaOH → NaCl + H₂OAs 1 mol of NaOH reacts with 1 mol of HCl, to solve this problem what we need to do is calculate the number of NaOH moles contained in 0.1 liters of a 0.5 M solution:
Molarity = Moles / litersMoles = Molarity * liters0.5 M * 0.1 L = 0.05 molThe moles of Hydrogen chloride required to neutralize the 0.1 liter of 0.5 M Sodium hydroxide is 0.05 moles.
How do we calculate moles?Moles (n) of any substance will be calculated by using the molarity (M) as:
M = n/V, where
V = volume
Given chemical reaction is:
NaOH +HCl → NaCl + H₂O
Moles of 0.5M NaOH will be calculated as:
n = (0.5)(0.1) = 0.05 moles
From the stoichiometry of the reaction it is clear that:
1 mole of NaOH = react with 1 mole of HCl
0.05 mole of NaOH = react with 0.05 mole of HCl
Hence option (B) is correct.
To know more about moles, visit the below link:
https://brainly.com/question/15374113
Describe how to
separate a mixture of
fillings, sulphur and salt.
Answer:
firstly for separating fillings we should use
magnet for separating it, and we left with sulphur and salt so for this we will use water
when we add water then salt get dissolve in it and we can easily take out sulphur again by evaporation we will obtain salt
hope it helps
the element chlorine is a gas. it's formula is cl2 . how many different masses of the cl2 molecule would you expect to find in a sample of chlorine gas ? explain your answer
Answer:
the answer is 3.33⋅1023 molecules of Cl2. Note that 6.022⋅1023 is also known as Avogadro's number, and it can be referred to as the number of molecules in one mole of that substance. Also, I calculated 70.9 because 35.45 g/mol (the mass of one Chlorine atom) times 2 is 70.9 g/mol (Cl2 has two Chlorine atoms).
Explanation:
The brightness of a light correlates to its amplitude. The higher the amplitude, the brighter the light will appear. Which of the waves below depicts the brightest light?
Answer:
Wave X is the brightest light
Explanation:
The amplitude of a wave refers to the maximum upward or downward displacement of a wave from its rest position. This implies that the amplitude is the measured distance from rest position to crest position. Similarly, the amplitude is also measured from the rest position to the trough position.
The crest of a wave is the point on a travelling wave that has the maximum amount of positive or upward displacement from the rest position. The trough of a wave is the point on the travelling wave that has the maximum amount of negative or downward displacement from the rest position.
From the wave diagrams shown in the attachment below, the wave that shows the highest amount of upward or downward displacement from the rest position (x - axis) is wave X. Since the brightness of a light wave increases with increaese in amplitude, wave X will have the highest amount of brightness.
what is the mass of an electron?
0 amu
1 amu
2 amu
dependent upon the type of element
PLEASE HELP
Answer:
the answer is 0 amu I hope it helps
Why do North and South Pole have different winter times?
The two poles have different location.
North Pole is found in the Western Hemisphere.
The tilt of the Earth towards the Sun changes throughout the year.
North Pole is found in the Northern Hemisphere.
Answer:
Explanation:
Both the Arctic (North Pole) and the Antarctic (South Pole) are cold because they don't get any direct sunlight. The Sun is always low on the horizon, even in the middle of summer. In winter, the Sun is so far below the horizon that it doesn't come up at all for months at a time.
Answer:
The tilt of the Earth towards the Sun changes throughout the year.
Explanation
how many grams are in 2 moles of copper
Answer:
In 2 moles of copper, there are 319.2172 grams.
Explanation:
Quick conversion chart of moles Copper(II) Sulfate to grams 1 moles Copper(II) Sulfate to grams = 159.6086 grams 2 moles Copper(II) Sulfate to grams = 319.2172 grams
how do i open the link when i get a question answered
Answer:
Just click on the answer, if it is an external link DO NOT CLICK IT. it may contain dangerous stuff including h*cked stuff.
Explanation:
Question is in picture! Will give extra points and BRAINLIEST! Promise!!! No links or I will report. Make sure it’s a legitimate answer and not a link
Which of the following has the LONGEST wavelength
A.) a lion growling at a frequency of 85 Hz
B.) a bass guitar playing a note at a frequency of 150 Hz
C.) a man speaking at a frequency of 520 Hz
D.) an opera singer singing at a frequency of 2100 Hz
Answer:
D.) an opera singer singing at a frequency of 2100 Hz
Explanation:
Wavelength is inversely proportional to frequency.
The one having the LONGEST wavelength is a lion growling at a frequency of 85 Hz and the correct option is option A.
What is Electromagnetic scale?The electromagnetic spectrum is a range of frequencies corresponding to wavelengths which are a few kilometres to a fraction of the size of an atomic nucleus in the spectrum of electromagnetic waves.
As a wave, light has several basic properties that describe it. One is frequency, which counts the number of waves that pass by a given point in one second.
Another is wavelength, the distance from the peak of one wave to the peak of the next. These properties are closely and inversely related: The larger the frequency, the smaller the wavelength — and vice versa.
A third is energy, which is similar to frequency in that the higher the frequency of the light wave, the more energy it carries.
Therefore, The one having the LONGEST wavelength is a lion growling at a frequency of 85 Hz and the correct option is option A.
Learn more about Electromagnetic spectrum, here:
https://brainly.com/question/23727978
#SPJ2
Does somebody know the answer ?
How do you account for the formation of ethane during chlorination of methane
Answer:
ethane is formed due to side reaction
Explanation:
During chlorination of methane, ethane is formed due to side reaction in termination step by the combination of two methyl free radicals.
Answer:
During chlorination of methane, ethane is formed due to side reaction in termination step by the combination of two methyl free radicals.
Which ionization process requires the most energy? which ionization process requires the most energy? f(g) → f +(g) + e- o(g) → o +(g) + e- f +(g) → f 2+(g) + e- o +(g) → o 2+(g) + e-?
If you start with 42 g of Fe-53, how much is left after 8.51 minutes? I
Answer:
2:38
Explanation:
Answer:
2.58 good luck with everything
what is the wavelength of a photon with an energy of 3.38 x 10-19J?
Answer:
C. 588 nm
Explanation:
Answer:
588 mm
Explanation:
Adiabatic process is a process in which _ is constant (a) temperature (b)volume (c)pressure (d) heat
Answer: Adiabatic process is a process in which heat is constant
Explanation:
The processes in which temperature remains constant is called isothermal process.
The process in which Volume remains constant is called isochoric process.
The process in which pressure remains constant is called isobaric process.
The process in which no heat is gained or lost by the system, Hence heat remains constant is called as adiabatic process.
Thus option d) heat is correct
Calculate the molar mass
Answer:
52
Explanation:
GUYS HELP PLS QUICK LOTS OF POINTS AND BRAINLIEST!
A 0.250 M solution was prepared from 135 mL of a 7.00 solution. What volume of water (in mL) was required for dilution?
Answer:
385
Explanation:
0.250m Converted to 250 mL then 250+135+ the answer
I'm not sure?
Which of the following is a correct description for solids?
A) closely arranged and vibrate in fixed positions
B) closely arranged and can move around
C) closely arranged and in fixed positions
Can you help me Please??
Answer:
C) closely arranged and in fixed positions
Can someone answer this pls
Answer:12
Explanation:
PLEASE ITS A TEST !!!!!!!! HELPPP!!!!!
What connects bones and muscles together?
Ligaments
Cartilage
Glue
Tendons
Answer: Tendons.
Explanation: A tendon is a fibrous connective tissue which attaches muscle to bone.