You decide to visit Santa Claus at the north pole to put in a good word about your splendid behavior throughout the year. While there, you notice that the elf Sneezy, when hanging from a rope, produces a tension of 415 N in the rope.
If Sneezy hangs from a similar rope while delivering presents at the earth's equator, what will the tension in it be? (Recall that the earth is rotating about an axis through its north and south poles.)

Answers

Answer 1

While distributing gifts near the equator, Sneezy will be hanging on a rope with a comparable tension of 413.56 N.

String tension is T = mg at the poles.

where T= tension  (N or kg-m/s2)

9.8 m/s2 is the acceleration caused by gravity (g).

m=Tension ÷ gravity

= 415 ÷9.8 kilogram

= 42.34 kilogram

The value of g has now changed at the equator. Earth's rotation causes g to become g'

g' = g - (w^2)×R

w = angular velocity of earth = 7.29×10^-5

R = radius of earth = 6371000metre

Now, the tension

mg' = mg - mw^2 R

   =  415 − 42.34×6371000×7.29×10^-5×7.29×10^-5

  = T'= 415-(42.34×6371000×7.29(10^(-5)) ×7.29×(10^(-5)))

T' =413.56 N

Gravity: In physics, gravity—also known as gravitation—is the constant force of attraction that pulls all things together.

To know more about radius, visit this:

https://brainly.com/question/24051825

#SPJ1


Related Questions

How do our attitudes help us organize our reality?

Answers

Answer:

If we are upset, often our mind cannot think straight. we need to take deep breaths, and focus on reality. When we are upset we do things out of anger.

Explanation:

Hope this helps!

our attitude towards our peers depicts how we will be treated by others

Help please & actually answer thank youu :)

Answers

Answer:

highest KE and lowest GPE = Dhighest GPE and lowest KE = Asome KE and some PE = B

Which of the following has no energy?"

Amoving ball
Awrecking ball
Non of the above

Answers

The answer is none of the above. Everything has energy! Good luck!

40 POINTS!!! PLEASE HELPP!!!
Please select the word from the list that best fits the definition

One form of energy changes to one other form

(A.) single transformation
(B.) multiple transformation

Answers

Answer:

A

Explanation:

if it was B it would say from one to another to another

Answer A



Single transformation

3) 4 electrons are placed - one electron per corner - at the corners of a square of side 1 meter. One fixed proton is placed in the middle of the square.The 4 electrons are held in place by some mechanism. The 4 electrons are released by the mechanism at the same time. They move and reach the corners of a square of side 0.8 meters, and keep on moving . Find the velocity of each electron at the corners of the square of side 0.8 meters.

Answers

Explanation:

3

i believe that they are all going at 3.2 meters each, I did 4 times 0.8

The velocity of each electron at the corners of the square is 15.92 m/s.

The given parameters;

charge of electron, q = 1.6 x 10⁻¹⁹ Clength of the square, L = 0.8 m

The diagonal length of the square is calculated as;

[tex]d^2 = 0.8^2 + 0.8^2\\\\d = \sqrt{0.8^2 + 0.8^2} \\\\d = 1.13 \ m[/tex]

The distance of each corner charge and the middle charge is calculated as;

[tex]r = \frac{1.13}{2} \\\\r = 0.565 \ m[/tex]

The force between each corner charge and the middle charge is calculated as;

[tex]F= \frac{kq^2}{r^2}[/tex]

The centripetal force on each charge moving around the square is calculated as;

[tex]F = \frac{mv^2}{r}[/tex]

solve the forces together;

[tex]\frac{mv^2}{r} = \frac{kq^2}{r} \\\\v^2 = \frac{kq^2}{m} \\\\v = \sqrt{ \frac{kq^2}{m} } \\\\v = \sqrt{ \frac{(9\times 10^9) \times (1.602\times 10^{-19})^2}{9.11 \times 10^{-31}} } \\\\v = 15.92 \ m/s[/tex]

Thus, the velocity of each electron at the corners of the square is 15.92 m/s.

Learn more here:https://brainly.com/question/13219544

convert 1 day into seconds.(you will need to show your work to receive credit.) please help thank you​

Answers

Answer:

the answer is 86400seconds.

Explanation:

1day= 24 hours

24hours to seconds =

24×60×60= 86400 seconds.

( 60 second = 1 minutes)

( 60 minutes = 1 hour)

You are holding a finishing sander with your right hand. THe sander has a flywheel which spins counterclockwise as seen from behind the handle. You are sanding a wall in front of you. as you turn the sander towards the right, you feel a tendency in the sander to...
a. pull away from you
b. turn towards the left
c. turn downward
d. turn upward
e. push toward you

Answers

Answer:

c. turn downward

Explanation:

From the information given:

To find the tendency of the sander;

We need to apply the right-hand rule torque; whereby we consider the direction of the flywheel, the direction at which the torque is acting, and the movement of the sander toward the right.

Since the flywheel of the sander is in counterclockwise movement, hence the torque direction will be outward placing on the wall. However, provided that the movement of the sander is toward the right, then there exists an opposite force that turns downward which showcases the tendency in the sander is downward.

A 3 kg block collides with a massless spring of spring constant 98 N/m attached to a wall. The speed of the block was observed to be 1.5 m/s at the moment of collision. The acceleration of gravity is 9.8 m/s 2 . How far does the spring compress if the surface on which the mass moves is frictionless

Answers

Answer: 0.83 m

Explanation:

Given

mass of the block is m=3 kg

spring constant k=98 N/m

The Speed at the time of collision is v=1.5 m/s

Here, the kinetic energy of the block is converted into Elastic potential energy

[tex]\Rightarrow \dfrac{1}{2}mv^2=\dfrac{1}{2}kx^2 \\\\\Rightarrow 3\times 1.5^2=98\times x^2\\\\\Rightarrow x^2=0.6887\\\\\Rightarrow x=0.829\approx 0.83\ m[/tex]


A fisherman sitting on the end of a pier notices that 6 wave crests pass him in 3 seconds. What is the frequency of the waves?
9.0 Hz
18.0 Hz.
20 Hz
4.5 Hz

Answers

Do you know the muffin man?

The frequency of the waves will be 18 Hz. Then the correct option is B.

What is the frequency?

The frequency of a repeated event is its number of instances per unit of time. It differs from angular frequency and is sometimes referred to as temporal frequency for clarification. One event occurs per second when measuring frequency in hertz.

Frequency is the number that represents the number of oscillations or intervals each second. The hertz is the SI unit for frequency (Hz). One cycle per second equals one hertz.

The number of finished waves produced each second is considered the wave frequency.

Six wave crests pass a fisherman sitting at the end of a pier in the span of three seconds.

The frequency of the waves is given as,

f = 6 x 3

f = 18 Hz

The waves will have a frequency of 18 Hz. Then, choice B is the best one.

More about the frequency link is given below.

https://brainly.com/question/29739263

#SPJ6

A train has a mass of 100000 kilograms.if its kinetic energy is 3mj what velocity is it travelling at​

Answers

Answer:

V = 7.75 meters per seconds.

Explanation:

Given the following data;

Mass = 100000 Kilograms

Kinetic energy = 3 Megajoules = 3 * 10⁶ Joules

To find the velocity of the train;

Kinetic energy can be defined as an energy possessed by an object or body due to its motion.

Mathematically, kinetic energy is given by the formula;

[tex] K.E = \frac{1}{2}MV^{2}[/tex]

Where;

K.E represents kinetic energy measured in Joules.

M represents mass measured in kilograms.

V represents velocity measured in metres per seconds square.

Substituting into the formula, we have;

[tex] 3000000 = \frac{1}{2}*100000*V^{2}[/tex]

Cross-multiplying, we have;

[tex] 6000000 = 100000V^{2}[/tex]

[tex] V^{2} = \frac{6000000}{100000} [/tex]

[tex] V^{2} = 60 [/tex]

Taking the square root of both sides, we have;

[tex] V = \sqrt {60} [/tex]

V = 7.75 m/s

What should stainless steel be considered when using it?

Answers

Strength, ductility, and toughness are the three top mechanical qualities that should be given importance. Stainless steel comes with 10–30% chromium as its alloying element. It is this element that helps it resist corrosion.

define the term change and state one negative change you may encounter as a student or as an employee in the future​

Answers

Answer:

hey iam bored pls join

ID: 724 645 3790

Password: 1111

The term change refers to an alteration of present conditions.

What is change?

The term change refers to an alteration of present conditions. When a change occurs, things cease to be the way they were. As a student, the complexity of academic work increases with time. This is a change that has taken place.

As an employee, you are given real world tasks to accomplish rather than mere mental exercises like when you were a student, this is change that has taken place.

Learn more about change: https://brainly.com/question/11739819

When an object vibrates it goes back and forth rapidly. How would you
describe this motion?
A: it goes below its starting point and back to its starting point
B: it goes passed its starting point in both directions
C: it will go back and fourth forever
D: it actually looks like spikey waves

Answers

Answer:

B) It appears to be SHM (simple harmonic motion) which is also the projection of an object moving in a circular path on either the x or y axes.

The wireless system is operating at 2GHz. A base station and a mobile unit are separated by 16km. The maximum gain of the transmitting antenna at the base station is 20dB. The input power to the transmitter is 100W, and the power received by the antenna is 5nW. The antennas are aligned, and there are no re ections or loses. What will be the received power if the distance between the mobile unit and the base station increases to 20km?

Answers

If everything else remains constant, then the received signal power is simply an inverse-square function of its distance from the transmitter.

That is, down 6dB when distance is doubled etc.

If distance increases from 16 to 20, then received power decreases by the factor of (16/20)^2.

That's (0.8)^2 = 0.64

New receive power is 5x0.64 = 3.2 nW

=. ===== ==========

Here's how I do it at my job:

Initial RSL = 5nW ~ - 53 dBm

loss = 20log(20/16)= 20log(1.25)~1.94dB

New RSL = - 54.94 dBm or ~ 3.2 nW .

PLEASE HELP! I'LL GIVE BRAINLEST​

Answers

Answer:

Weight = 8.162 Newton.

Explanation:

Given the following data;

Mass = 2.2 kg

Acceleration due to gravity = 3.71 N/kg

To find the weight of the textbook;

Weight = mass * acceleration due to gravity

Weight = 2.2 * 3.71

Weight = 8.162 N

Therefore, the weight of the science textbook in mars is 8.162 Newton.


can someone please help me !!!!

Answers

Answer:

it's A subduction, deep water trench

If a wave has a frequency of 5 hertz, the period for one wave cycle will be

Answers

Answer:

0.2 seconds

Explanation:

f=1/t

1/5=0.2

32. Assume the helium-neon lasers commonly used in student physics laboratories have power outputs of 0.500 mW. (a) If such a laser beam is projected onto a circular spot 1.00 mm in diameter, what is its intensity

Answers

Answer:

636.6 W/m²

Explanation:

From the given information:

The area of the circular spot can be calculated as:

A = πr²

A = π(0.5 × 10⁻³ m)²

A = 7.85 × 10⁻⁷ m²

The intensity can be determined by using the formula:

[tex]I = \dfrac{P}{A}[/tex]

[tex]I = \Big ( \dfrac{0.500 \ mW}{\pi (0.5 \times 10^{-3} \ m )^2} \Big) \Big( \dfrac{10^{-3} \ W}{1\ mW} \Big)[/tex]

[tex]I = \dfrac{0.500 \times 10^{-3} }{\pi(0.25 \times 10^{-6} )}[/tex]

I = 636.6 W/m²

Please help The position of masses 4kg, 6kg, 7kg, 10kg, 2kg, and 12kg are (-1,1), (4,2), (-3,-2), (5,-4), (-2,4) and (3,-5) respectively. Determine the position of the center of mass of this system?​

Answers

Answer:

(1.9756, -2.1951)

Explanation:

The center of mass equation is: [tex]x_{cm}[/tex] = [tex]\frac{m_{1}x_{1} + m_{2}x_{2} + m_{3}x_{3} + m_{4}x_{4} + m_{5}x_{5} + m_{6}x_{6}}{m_{1} + m_{2} + m_{3} + m_{4} + m_{5} + m_{6}}[/tex], where m represents the masses and x represents the position.

In order to find the coordinates of the center of mass, we need to use this equation for both the x-values and the y-values.

x-values:

[tex]x_{cm}[/tex] = [tex]\frac{m_{1}x_{1} + m_{2}x_{2} + m_{3}x_{3} + m_{4}x_{4} + m_{5}x_{5} + m_{6}x_{6}}{m_{1} + m_{2} + m_{3} + m_{4} + m_{5} + m_{6}}[/tex] = [tex]\frac{4(-1)+6(4)+7(-3)+10(5)+2(-2)+12(3)}{4+6+7+10+2+12}[/tex] = [tex]\frac{(-4)+(24)+(-21)+(50)+(-4)+(36)}{41}[/tex] = [tex]\frac{81}{41}[/tex] = 1.9756

y-values:

[tex]y_{cm}[/tex] = [tex]\frac{m_{1}y_{1} + m_{2}y_{2} + m_{3}y_{3} + m_{4}y_{4} + m_{5}y_{5} + m_{6}y_{6}}{m_{1} + m_{2} + m_{3} + m_{4} + m_{5} + m_{6}}[/tex] = [tex]\frac{4(1)+6(2)+7(-2)+10(-4)+2(4)+12(-5)}{4+6+7+10+2+12}[/tex] = [tex]\frac{(4)+(12)+(-14)+(-40)+(8)+(-60)}{41}[/tex] = [tex]\frac{-90}{41}[/tex] = -2.1951

center of mass:

(1.9756, -2.1951)

Half Time At 3:00 the hour hand and the minute hand of a clock point in directions that are 90.0
apart. What is the first time after 3:00 that the angle between the two hands has decreased by half to 45.0?

Answers

The first time after 3:00 that the angle between the two hands has decreased by half to 45.0 is 3:08:11.

Angular velocity of the hour hand

The angular velocity of the hour hand for 12 hours time is calculated as follows;

[tex]\omega_h = \frac{2\pi}{12(3600 \ s)}[/tex]

Angular velocity of the minute hand

The angular velocity of the minute hand for 12 hours time is calculated as follows;

[tex]\omega _m = \frac{2\pi}{3600}[/tex]

Difference in the angular velocity

[tex]\Delta \omega = \frac{2\pi }{3600} - \frac{2\pi }{12(3600)} = \frac{11(2\pi)}{12(3600)} = \frac{22\pi}{12 (3600)}[/tex]

First angle between the two hands in radians

[tex]45^0 = \frac{45}{180} \pi= \frac{\pi}{4}[/tex]

Time after 3:00

The time after 3:00 is calculated as follows;

[tex]t =( \frac{\pi}{4}) /\frac{22\pi}{12(3600)} \\\\t = \frac{\pi }{4} \times \frac{12(3600)}{22\pi} \\\\t = 490.91 \ s\\\\t = 8 \min, \ 10.91 \ s[/tex]

[tex]t \approx 8\min, 11 \ s[/tex]

Thus, the first time after 3:00 that the angle between the two hands has decreased by half to 45.0 is 3:08:11.

Learn more time in angular difference here: https://brainly.com/question/7815

a
Ten 2.2 v cells each having an internal
resistance of o.1ohms in are connected in series
to a load of 21ohm. Determine
pd at the battery terminals​

Answers

Answer:

22Volts

Explanation:

The pd at the terminal is known as the emf

Since there are Ten 2.2V cells

Terminal voltage = number of cells * pd of one cell

Terminal voltage = 10 * 2.2

Terminal voltage = 22V

Hence the pd at the battery terminals​ is 22Volts

PLEASE HELPPPPPP!ASAPPPPPPP​

Answers

Answer:

Altitude is the height of landmass calculated from sea level. No it has no effect on weight.

Explanation:

The altitude at sea level is always assumed to be 0°, thus as you move away from altidude is calculated in increments while moving into the sea, the vice versa is true.

place the compass at one pole of the bar magnet click flip polarity in the menu what happens to the bar magnet and the compass needle​

Answers

Answer:

The two poles of the bar magnet change positions. The compass needle spins a half circle.

Explanation:

Answer:

The two poles of the bar magnet change positions. The compass needle spins a half circle.

Explanation:

edmentum answer

A roller coaster works by being hoisted to the top of the highest peak on the track and then released. As the roller coaster car moves along the track the energy gets converted back and forth between kinetic and gravitational potential energy. The entire time the roller coaster car is in motion air friction and friction in the wheels act to oppose the motion of the car. At which point during the ride is the total mechanical energy of the roller coaster car the greatest?

a. At the bottom of the first dip in the track when the car is moving the fastest.
b. When the car is exactly at half its original height half way through the ride.
c. At the top of the highest peak as the very start of the ride.
d. At the end of the ride as the car nears the station.

Answers

Answer:

a. At the bottom of the first dip in the track when the car is moving the fastest.

Explanation:

P.S - The exact question is -

The correct option is - a. At the bottom of the first dip in the track when the car is moving the fastest.

Reason -

From the diagram , we can see that the total mechanical energy of the roller coaster car is greatest At the bottom of the first dip in the track when the car is moving the fastest.

An empty container is filled with helium to a pressure P at a temperature T. Neon, which has atoms that are 5 times more massive than those of helium, is then added to the container until the new pressure in the container is 2P at the same temperature T. The ratio of the average speed of the helium atoms to the average speed of the neon atoms is:_________
a. 25 to 1
b. 5 to 1
c. 5to 1
d. 2to 1 E
e. 1 to 1

Answers

The ratio of the average speed of the helium atoms to the average speed of the neon atoms is 5 to 1 C.

We have that for the Question, it can be said that the ratio of the average speed of the helium atoms to the average speed of the neon atoms is

5:1

Option B

From the question we are told

An empty container is filled with helium to a pressure P at a temperature T. Neon, which has atoms that are 5 times more massive than those of helium, is then added to the container until the new pressure in the container is 2P at the same temperature T. The ratio of the average speed of the helium atoms to the average speed of the neon atoms is:_________

a. 25 to 1

b. 5 to 1

c. 5to 1

d. 2to 1

e. 1 to 1

Generally the equation for the average speed of Molecules  is

mathematically given as

[tex]For Helium\\\\C_h=\frac{8P_hV_h}{\pim_h}\\\\Neon gas\\\\C_n=\frac{8P_nV_n}{\pim_n}\\\\Where\\\\Ph=P_n\\\\Vh=Vn\\\\[/tex]

[tex]\frac{C_h}{C_n}=\frac{\frac{8P_hV_h}{\pim_h}}{\frac{8P_nV_n}{\pim_n}}[/tex]

[tex]\frac{C_h}{C_n}=\sqrt{\frac{\frac{1}{5}}{{\frac{1}{5}}}[/tex]

[tex]\frac{C_h}{C_n}=\sqrt{\frac{5}{1}[/tex]

Therefore

The ratio of the average speed of the helium atoms to the average speed of the neon atoms is

5:1

For more information on this visit

https://brainly.com/question/23379286

PLEASE HELP! I'LL GIVE BRAINLEST​

Answers

Neil is right as you don’t lose mass on the moon. The gravity is just stronger in earth so you weigh more on earth.

You are trying to catch the mutated mouse and you have a rope
that both you and the mouse are pulling with a force of 500 Newtons,
but the rope does not move.
How much work is done?


PLS ANSWER ASAP! WILL MARK AS BRAINLYIST!!!!!
time left (5:00)!!

Answers

Answer:

none no work cuz no motion

Explanation:

GOOD LUCK

If a 5-L balloon at 25 degrees celsius were gently heated to 30 degrees celsius, what new volume would the balloon have? Show all work for credi

Answers

Answer: 5.08 L.

Explation down below

Plz help, will Mark brainliest. A 20.0 Ohm and 60.0 Ohm resistor are connected in series to a 9.00 V battery. How much current flows out of the battery?
(Unit = A)

Answers

Answer: 0.1125A

Explanation:

We need to know the total resistance which will be:

R = R1+R2

where,

R1 = 20 ohm

R2 = 60 ohm

Therefore, R = 20 + 60 = 80 ohm

We should note that from Ohm's law

v = iR

i = v/R

where,

i = 9/80 = 0.1125 A

Therefore, the current that flows out of the battery is 0.1125A

MY NOTES A spring with a mass of 2 kg has a damping constant 14 kg/s. A force of 3.6 N is required to keep the spring stretched 0.3 m beyond its natural length. The spring is stretched 0.6 m beyond its natural length and then released. Find the position of the mass at any time t. (Assume that movement to the right is the positive x-direction and the spring is attached to a wall at the left end.)

Answers

Answer: What’s the question?
Explanation: everything looks good for this!! I understand now :) I think ❤️ pls give me Brainly!
Other Questions
Warehousing allows for ________ production runs.Multiple ChoiceShorter.Longer.None of the other answers.Unchanged.Identical Find the simple interestPrincipal =4800.00annual interest rate =3%time= 3 yearsThe interest earned is = ?PLS ANSWER THIS IS DUE TOMMOROW Can tar and QRS be proven congruent by SAS? What is the impact of trade agreements? When an enzyme is present in the R-conformation it usually binds which of the following with the greatest affinity? An allosteric activator O A competitive inhibitor O An allosteric inhibitor O The enzyme substrate what are the identifiable elements of control structure. Why do we need to clean and sanitized? if the triple beam balance scale and spring scale were taken to the top of mt. everest, do you think they measure same as in nyc? What is a low risk investment? What i Winterbourne tragic flaw? a. He fall in love with women before getting to know them. B. He i depreed and world-weary. C. He put too much faith in rumor and goip. D. He i not warm and outgoing like Daiy A textbook store sold a combined total of 412 chemistry and math textbooks in a week. The number of chemistry textbooks sold was three times the number of math textbooks sold. How many textbooks of each type were sold? How many factor pairs does the number 84 have? How can producers make the most profit? What is the difference between sprint and Iteration? hannah purchased a jet ski for $3,849 using a 12-month deferment plan. the interest rate is 25.67%. a down payment of $575 is required as well as a minimum monthly payment of $92. what is the balance at the beginning of the 13th month if only the minimum payment is made during the introductory period? (4 points) $4,128.72 $3,282.99 $3,116.72 $4,220.72 What are 3 common forms of Anglo-Saxon literature? In general, the differences in child well-being across family types are largely influenced by ______.Question 27 options:a)ethnic identityb)religious affiliationc)family incomed)geographic region What are the 8 types of functions? Which of the following statements is true of merit pay?Merit pay decreases fixed compensation costs over time.Merit pay is inexpensive even when too many high-performance ratings are awarded.Merit programs are commonly designed to pay different amounts depending on the level of performance.Merit pay differentials based on performance are usually large enough to motivate performance. when the body temperature becomes abnormally high, thermoregulatory homeostasis is maintained by: group of answer choices an increase in blood flow to the skin and a decrease in sweat gland activity. an increase in sweat gland activity and blood flow to the skin. a decrease in blood flow to the skin and sweat gland activity. an increase in sweat gland activity and a decrease in blood flow to the skin.