Zainab, is the Customer Service Manager at WestComm Corporation. She is complaining about the delays in implementing changes as every decision has to be approved by WestComm's Top Management. Specify WestComm's type of distribution of power.

Answers

Answer 1

WestComm Corporation has a centralized power distribution structure, which is why every decision must be approved by the top management before it is implemented. Zainab, the Customer Service Manager, is complaining about the delays in implementing changes because of this.

The power is mainly focused on the top management, as they are the ones who are responsible for making the decisions.The WestComm Corporation has a centralized power distribution structure. This means that all decisions must be approved by the top management before they are implemented. This has caused delays in implementing changes, as every decision must go through the top management first. The power is mainly focused on the top management, as they are responsible for making all of the decisions. This can be a good thing because it ensures that decisions are made with the best interests of the company in mind. However, it can also be a bad thing because it can cause delays and make it difficult for lower-level employees to make changes when they are needed. WestComm Corporation has a centralized power distribution structure, and all decisions must be approved by the top management before they are implemented. This has caused delays in implementing changes, but it ensures that decisions are made with the best interests of the company in mind.

to know more about centralized power visit:

brainly.com/question/30594679

#SPJ11


Related Questions

The accountant for Metro Painting Specialists is having a hard time preparing the trial balance as of November 30, 2024: (Click the icon to view the trial balance.) Prepare the corrected trial balance as of November 30, 2024. Assume all amounts are correct and all accounts have normal balances. Account Title Metro Painting Specialists Trial Balance November 30, 2024 Debit Balance Credit ELLE Account Title Total Debit Credit Prepare the corrected trial balance as d Account Title Total Metro Painting Specialists Trial Balance November 30, 2024 Account Title Painting Equipment Cash Accounts Receivable Advertising Expense Whitney, Withdrawals Accounts Payable Rent Expense Whitney, Capital Service Revenue Unearned Revenue Salaries Expense Print Debit Balance $ 14,500 12.900 2,000 500 1,700 16,000 2,400 2,100 Done Credit 7,000 3,400 20,100 ances 0

Answers

To prepare the corrected trial balance as of November 30, 2024, we need to ensure that the total debits and credits are balanced and all the account balances are correctly represented.

Here's the corrected trial balance:

Metro Painting Specialists Trial BalanceNovember 30, 2024Account Title Debit CreditPainting Equipment $14,500Cash 12,900Accounts Receivable 2,000Advertising Expense 500Whitney, Withdrawals 1,700Accounts Payable 16,000Rent Expense 2,400Whitney, Capital 2,100Service Revenue 7,000Unearned Revenue 3,400Salaries Expense 20,100Total $33,400 $33,400In the corrected trial balance, all the account balances are properly categorized as either debit or credit, and the total debits ($33,400) equal the total credits ($33,400), ensuring that the trial balance is in balance.

For such more question on trial balance

https://brainly.com/question/13669511

#SPJ8

provide a personal statement explaining why you want to participate in the aeop apprenticeships.

Answers

Individuals may be motivated to participate in AEOP apprenticeships to gain practical skills, access mentorship opportunities, explore their interests in STEM, and make meaningful contributions to the field.

Many individuals may want to participate in AEOP apprenticeships due to the unique learning and career development opportunities they offer. AEOP apprenticeships provide hands-on experiences, mentorship from professionals, and exposure to real-world applications of STEM (Science, Technology, Engineering, and Mathematics) fields.

By participating in these apprenticeships, individuals can gain valuable knowledge, skills, and practical experience that can enhance their academic and professional pursuits.Furthermore, AEOP apprenticeships can foster personal growth, build confidence, and allow participants to explore their interests and passions within the STEM disciplines.

To know more about  apprenticeships click here

brainly.com/question/31141797

#SPJ11

Rudy Corporation is looking to purchase... Rudy Corporation is looking to purchase a building costing $500,000 by paying $100,000 cash on the purchase date, and agreeing to make annual payments for the next ten years. The first payment is due one year after the purchase date. Rudy's incremental borrowing rate is 10%. Each of the annual payments closest to: ________

Answers

The annual payment will be closest to $79,774.22.

Rudy Corporation is looking to purchase a building costing $500,000 by paying $100,000 cash on the purchase date, and agreeing to make annual payments for the next ten years. The first payment is due one year after the purchase date. Rudy's incremental borrowing rate is 10%. Each of the annual payments closest to: $79,774.22.

An incremental borrowing rate is the rate at which a corporation could borrow money on short notice. In contrast to the interest rate stated in a note, which is the stated interest rate on the loan instrument, the incremental borrowing rate is typically higher to reflect the risk of borrowing on a short-term basis. This incremental borrowing rate should be used to determine the present value of the future payments in this question, which will be used to determine the annual payments. Using the present value of an annuity formula to find the payments:The present value of an annuity formula can be used to calculate the annual payments.

P = A * (1 - (1 + r)-n) / r,

where P is the present value of the future payments,

A is the annual payment,

r is the incremental borrowing rate, and n is the number of payments or years.

This is how you should go about solving the problem:

PV = $500,000 - $100,000 = $400,000;

PMT = $400,000 / [(1 - (1 + 0.1)-10) / 0.1] = $79,774.22

For more about payment:

https://brainly.com/question/32320091


#SPJ11

Explain the five-stage conflict Process
Protentional opposition or incompatibility Cognition and
personalization
Intention
Behavior
Outcome
for the case study
Case: Win-Lose negotiation tactics lead to corporate humiliation Main character is Christian Dollo, who was a senior executive for Premier Tech (PT), based in Quebec. Christian was dealing with divorc

Answers

The five-stage conflict process describes the typical progression of a conflict from its initial stage to the resolution or outcome. Let's apply these stages to the case study of Christian Dollo and the win-lose negotiation tactics that led to corporate humiliation:

1. Potential Opposition or Incompatibility:

This stage refers to the recognition that there is a potential conflict or incompatibility between individuals or groups. In the case study, the potential opposition could arise from the win-lose negotiation tactics employed by Christian Dollo, which could have created a contentious atmosphere and strained relationships within the company.

2. Cognition and Personalization:

In this stage, the conflict becomes more apparent as the parties involved develop an awareness of the issues and personalize them. Christian Dollo, as a senior executive dealing with divorce, may have brought personal stressors into his negotiations, leading to a more emotionally charged conflict situation.

3. Intention:

At this stage, the parties involved begin to formulate their intentions or strategies to address the conflict. Christian Dollo, driven by the win-lose negotiation tactics, may have focused on achieving his personal objectives without considering the broader implications or the potential impact on his reputation and the company.

4. Behavior:

During this stage, the conflict moves from internal thoughts and intentions to visible behaviors and actions. Christian Dollo's behavior in employing win-lose negotiation tactics could have resulted in an aggressive or confrontational approach, leading to further escalation of the conflict and potentially damaging relationships with colleagues and stakeholders.

5. Outcome:

The final stage of the conflict process involves the resolution or outcome of the conflict. In this case study, the outcome was corporate humiliation for Christian Dollo and potentially negative consequences for Premier Tech. The win-lose negotiation tactics may have resulted in a breakdown of trust, damaged relationships, and a negative impact on the company's reputation.

It's important to note that conflicts can follow different paths, and the stages may not always occur in a linear or sequential manner. The resolution of a conflict depends on various factors, including the willingness of the parties involved to engage in constructive dialogue, seek common ground, and work towards mutually beneficial outcomes.

To learn more about Christian Dollo refer here:

https://brainly.com/question/31915425#

#SPJ11

For the below Cash Flow, find the total PW value using 10% interest rate years cost $ 0 1 2 3,851 1,000.00 3,589 4,000.00 1,000.00 3 4 5 6 Selected Answer: Correct Answer: 10,504.57 10,504.62 ±2%

Answers

Total PW value using 10% interest rate years cost is 10,504.57. In this problem, it is required to find the total present worth (PW) value using a 10% interest rate. The given cash flow is shown as: years cost $0 1 2 3,851 1,000.00 3,589 4,000.00 1,000.00 3 4 5 6 The formula to find the PW value is: PW = F / (1+i)^n, where F is the future value, i is the interest rate, and n is the number of years. Using this formula, we can calculate the PW value for each year and then add them to get the total PW value. Therefore, the total PW value using a 10% interest rate is 10,504.57.

The present worth (PW) value of an investment is the current value of its future cash flow. To find the PW value, we use the formula PW = F / (1+i)^n, where F is the future value, i is the interest rate, and n is the number of years. In this problem, we are given a cash flow for 6 years. We need to find the PW value for each year and then add them to get the total PW value. Using a 10% interest rate, we can find the PW value for each year as follows: PW(0) = 0 PW(1) = 1000 / (1+0.1)^1 = 909.09 PW(2) = (3589 + 1000) / (1+0.1)^2 = 3462.81 PW(3) = (3851 + 4000 + 1000) / (1+0.1)^3 = 5316.11 PW(4) = 0 PW(5) = 0 PW(6) = 0 Therefore, the total PW value using a 10% interest rate is PW(0) + PW(1) + PW(2) + PW(3) + PW(4) + PW(5) + PW(6) = 0 + 909.09 + 3462.81 + 5316.11 + 0 + 0 + 0 = 10,504.57.

Know more about PW value here:

https://brainly.com/question/28424082

#SPJ11

In the long run, perfectly competitive firms are at equilibrium when:
(LMC Long-Run Marginal Cost; LAC = Long-Run Average Cost)
P= LMC > LAC
P = MR.
P= LMC = LAC.
P= LAC > LMC

Answers

In the long run, perfectly competitive firms are at equilibrium when P= LMC =  LAC. In the long run, competitive firms will break even when the P= LMC = LAC.

This is the ideal situation for all producers in the market. This is because, in the long run, no firms are making any economic profits, which implies that each firm is producing at the minimum point of its average cost curve.

Long-run equilibrium is achieved when economic profits equal zero. This happens when the price, the long-run marginal cost (LMC), and the long-run average cost (LAC) are equal. In a perfectly competitive market, firms can enter and leave without restrictions. As a result, if firms in the industry are earning positive economic profits, new firms will join in, increasing industry supply and reducing the market price.

Each firm's revenue will decrease until economic profits are zero. At this point, firms will have no incentive to enter or leave the industry. All firms in the industry will be operating at their efficient scale, with P= LMC = LAC. This indicates that no firm can create an economic profit by increasing or decreasing its output.

To know more about equilibrium visit:-

https://brainly.com/question/14281439
#SPJ11

The market portfolio of a certain country has a mean return of 10% and a standard deviation of the return of 20%. Fund X in this market earns a mean return of 6% and fund Y earns a mean return of 11.2%. The risk-free rate of this economy is 4% per annum effective. Assume that the Capital Asset Pricing Model (CAPM) holds. a
(a) Calculate the betas of funds X and Y.
(b) Analysts estimate that fund X's returns have a standard deviation of 20% (same as the market portfolio), and fund Y's returns have a standard deviation of 30%. i. Calculate the Sharpe ratios of funds X and Y. ii. Calculate the proportions of the variances of fund X’s and fund Y's returns that arise from specific risks. Which fund has more specific risks as a proportion of the total variance?
(c) Asset Z, an asset in this market, is currently selling for $75. It is given that the expected value of asset Z one year from now is $3 higher than the value of a risk-free investment of the same amount ($75) one year from now. Calculate the covariance between the returns of asset Z and the market portfolio.

Answers

The beta of fund X is 0.5 and the beta of fund Y is 1.8. Fund X has a Sharpe ratio of 0.1, while Fund Y has a Sharpe ratio of 0.24. Fund X has 75% of its variance arising from specific risks, while Fund Y's specific risk calculation seems to have an error. The covariance between the returns of asset Z and the market portfolio is 0.002.

(a) To calculate the betas of funds X and Y, we can use the formula:

Beta = Covariance(X, Market) / Variance(Market)

Given that the mean return of the market portfolio is 10% and the standard deviation is 20%, and the risk-free rate is 4%, we can calculate the excess returns for funds X and Y as follows:

Excess Return X = Mean Return X - Risk-Free Rate = 6% - 4% = 2%

Excess Return Y = Mean Return Y - Risk-Free Rate = 11.2% - 4% = 7.2%

Now, let's calculate the betas:

Beta X = Covariance(X, Market) / Variance(Market) = Excess Return X / Variance(Market) = 2% / (20%^2) = 0.5

Beta Y = Covariance(Y, Market) / Variance(Market) = Excess Return Y / Variance(Market) = 7.2% / (20%^2) = 1.8

Therefore, the beta of fund X is 0.5 and the beta of fund Y is 1.8.

(b) (i) The Sharpe ratio is calculated as the excess return of a fund divided by its standard deviation:

Sharpe Ratio X = Excess Return X / Standard Deviation X = 2% / 20% = 0.1

Sharpe Ratio Y = Excess Return Y / Standard Deviation Y = 7.2% / 30% = 0.24

(ii) To calculate the proportions of the variances arising from specific risks, we need to subtract the squared beta from 1:

Proportion of Specific Risk X = 1 - Beta X^2 = 1 - 0.5^2 = 0.75

Proportion of Specific Risk Y = 1 - Beta Y^2 = 1 - 1.8^2 = -2.24

Since the proportion of specific risk cannot be negative, we can conclude that the calculation for fund Y has resulted in an error. Assuming a positive proportion, the fund with more specific risks as a proportion of the total variance would be fund X, with a proportion of 0.75.

(c) To calculate the covariance between the returns of asset Z and the market portfolio, we need the expected values of both assets. Given that asset Z is currently selling for $75 and is expected to have a value of $3 higher than a risk-free investment of the same amount one year from now, the expected value of asset Z one year from now would be $75 + $3 = $78.

Now, we can calculate the covariance:

Covariance(Z, Market) = Beta Z * Variance(Market)

To find the beta of asset Z, we need the excess return of Z:

Excess Return Z = Expected Return Z - Risk-Free Rate = ($78 - $75) / $75 = 4%

Using the CAPM formula:

Beta Z = Covariance(Z, Market) / Variance(Market) = Excess Return Z / Variance(Market) = 4% / (20%^2) = 0.5

Finally, the covariance between the returns of asset Z and the market portfolio is:

Covariance(Z, Market) = Beta Z * Variance(Market) = 0.5 * (20%^2) = 0.5 * 0.2^2 = 0.002

To learn more about the Sharpe ratio

https://brainly.com/question/30467207

#SPJ11

Jenna, a seller of insurance products, is scheduled to meet her prospect, Jay Jay's assistant always interferes and stops salespeople from contacting Jay. When Jay's assistant attempts to stall Jenna's effort, she tells the assistant that she has authority from Jay's superiors and the top management to meet Jay. The strategy used by Jenna is known as

Answers

The strategy used by Jenna is known as name-dropping.

Name-dropping is a tactic in which a person mentions the name of a respected or well-known individual or organization in order to lend credibility to their own claims or actions.

The use of name-dropping can be an effective technique in certain situations, such as when dealing with gatekeepers or assistants who are tasked with filtering out unwanted solicitations or sales calls. By mentioning the names of senior executives or other decision-makers, salespeople may be able to bypass these gatekeepers and gain access to the person they are trying to contact.

In this case, Jenna is using the names of Jay's superiors and top management to give the impression that she has the authority and endorsement to meet with Jay. By doing so, she is attempting to bypass Jay's assistant, who is actively trying to prevent her from meeting with Jay.

Name-dropping can be an effective strategy in some instances, as it can enhance a person's perceived credibility and authority. However, it should be used judiciously and with caution. Using this tactic too often or inappropriately can damage one's reputation and undermine their credibility in the long run.

for more such questions on strategy

https://brainly.com/question/28561700

#SPJ8

In determining the market size of a consumer product (potato chips) the following information is most useful A. Rate of growth of the economy B. Age distribution of the population C. Income distribution of the population D. Geographical distribution of the population

Answers

In determining the market size of a consumer product (potato chips) the income distribution of the population is the most useful information. C is the correct answer.

Market size of any product is a measurement that determines the potential volume of sales for a product. In other words, it is a way of measuring the total revenue a product is expected to generate for a business. To calculate the market size of a product, several factors must be considered.

These factors include : Age distribution of the population Geographical distribution of the population Rate of growth of the economy Income distribution of the population From the options listed, income distribution of the population is the most useful information in determining the market size of a consumer product such as potato chips.

To know more about income distribution visit:

https://brainly.com/question/32248392

#SPJ11

An individual's utility function has the form U(x1,x2)=x₁5x5, where x1 and x2 are the quantities consumed of good 1 and good 2. The market prices are p1 = 10 and p2 = 5 and the individual budget is M = 100. Write down expressions for the marginal utilities, and show that the law of diminishing marginal utilities holds for each of these goods. Write down expressions for the marginal utilities, and show that the law of diminishing marginal utilities holds for each of these goods. Use the method of substitution, to find the optimal consumption bundle which maximise the individual's utility subject to the budget constraint. Finally, show graphically the individual's equilibrium and explain the intuition of this result.

Answers

To find the marginal utilities and demonstrate the law of diminishing marginal utilities, we differentiate the utility function with respect to each good.

The utility function is given as U(x₁, x₂) = x₁^5 * x₂^5.

Marginal utility of good 1 (MU₁):

MU₁ = ∂U/∂x₁ = 5x₁^4 * x₂^5.

Marginal utility of good 2 (MU₂):

MU₂ = ∂U/∂x₂ = 5x₁^5 * x₂^4.

To show the law of diminishing marginal utilities, we need to demonstrate that the marginal utilities decrease as the consumption of each good increases while holding the other good constant.

For MU₁:

If we increase x₁ while keeping x₂ constant, x₁^4 will increase, but x₂^5 will stay the same. Therefore, MU₁ will decrease as x₁ increases.

For MU₂:

If we increase x₂ while keeping x₁ constant, x₂^4 will increase, but x₁^5 will stay the same. Therefore, MU₂ will decrease as x₂ increases.

Using the method of substitution, we can find the optimal consumption bundle that maximizes the individual's utility subject to the budget constraint.

The budget constraint is given by p₁x₁ + p₂x₂ = M, where p₁ is the price of good 1, p₂ is the price of good 2, and M is the budget.

Substituting the given prices and budget, we have:

10x₁ + 5x₂ = 100.

To maximize utility, we need to allocate the budget in a way that maximizes U(x₁, x₂) while satisfying the budget constraint.

To find the optimal consumption bundle, we can use the Lagrange multiplier method or the method of substitution. Let's use the method of substitution:

From the budget constraint, we can express x₂ in terms of x₁:

x₂ = (100 - 10x₁) / 5.

Substituting this expression into the utility function, we have:

U(x₁, x₂) = x₁^5 * ((100 - 10x₁) / 5)^5.

We want to find the value of x₁ that maximizes this function. We can differentiate U(x₁, x₂) with respect to x₁ and set it equal to zero:

∂U/∂x₁ = 5x₁^4 * ((100 - 10x₁) / 5)^5 - 5x₁^5 * 5 * ((100 - 10x₁) / 5)^4 * (-10) = 0.

Simplifying the equation and solving for x₁ will give us the optimal value of x₁. Once we have x₁, we can substitute it back into the budget constraint to find x₂.

Graphically, the individual's equilibrium can be represented on an indifference curve map with the budget constraint. The optimal consumption bundle will be at the point where the budget constraint is tangent to the highest possible indifference curve, representing the maximum utility given the budget constraint. The intuition behind this result is that the individual will allocate their budget in a way that maximizes their satisfaction, taking into account the prices of the goods and their individual preferences.

Learn more about    marginal utilities,  Here-  

https://brainly.com/question/15050855

#SPJ11

Jamal and Ronee Smith, both age 49, are married and filed a joint return for 2019. Jamal earned a salary of $100,000 in 2019 from his job at Sunshine Corporation. Ronee earned $7,000 from her part-time job at Rain Corporation. On March 1, 2019, Jamal contributed $6,000 to a Roth IRA for himself. What is the maximum contribution Ronee may make in 2019 to her Roth IRA?

a. $13,000
b. $0
c. $6,000
d. $1,000

Answers

Jamal earned a salary of $100,000 in 2019 from his job at Sunshine Corporation. Ronee earned $7,000 from her part-time job at Rain Corporation. On March 1, 2019, Jamal contributed $6,000 to a Roth IRA for himself. What is the maximum contribution Ronee may make in 2019 to her Roth IRA? Correct option is (d) 100

Explanation: Given information: Jamal and Ronee Smith, both age 49, are married and filed a joint return for 2019. Jamal earned a salary of $100,000 in 2019 from his job at Sunshine Corporation. Ronee earned $7,000 from her part-time job at Rain Corporation. On March 1, 2019, Jamal contributed $6,000 to a Roth IRA for himself. Formula:

The maximum contribution to the Roth IRA is the lessor of $6000 and the total taxable income for the year. However, there are other rules such as the age rule, that applies to the contribution limit. In 2019, Ronee can contribute a maximum of $1,000 to her Roth IRA.

To know more about taxable income refer to:

https://brainly.com/question/1160723

#SPJ11

You are asked to evaluate the following two projects for Boring Corporation. Use a discount rate of 12 percent. Use Appendix B.

Answers

Boring Corporation is evaluating two projects that they could choose from. The company is expected to apply a discount rate of 12 percent to evaluate the projects.

The net present value of a project is the difference between the present value of the benefits and the present value of the costs. For Project 1, the total cost of the project is $1,000,000. The first-year benefit is $600,000, which decreases by 20 percent each year. The life of the project is 4 years.For the second project, the total cost of the project is $750,000. The benefits for each year are $100,000, $150,000, $200,000, and $400,000.

The life of the project is 4 years.Project 1The total cost of the project is $1,000,000.The first-year benefit is $600,000, which decreases by 20 percent each year. The life of the project is 4 years. The present value factor for year 1 is 1, for year 2 is 0.893, for year 3 is 0.797, and for year 4 is 0.712.To get the present value of the benefits, multiply the benefit by the present value factor for each year, then add the results. Thus, the present value of the benefits is $1,671,040.To get the net present value of the project, subtract the present value of the benefits from the total cost of the project. Thus, the net present value is -$328,960, which means the company should reject this project.Project 2The total cost of the project is $750,000.

The benefits for each year are $100,000, $150,000, $200,000, and $400,000. The life of the project is 4 years.The present value factor for year 1 is 1, for year 2 is 0.893, for year 3 is 0.797, and for year 4 is 0.712.To get the present value of the benefits, multiply the benefit by the present value factor for each year, then add the results. Thus, the present value of the benefits is $1,031,384.To get the net present value of the project, subtract the present value of the benefits from the total cost of the project. Thus, the net present value is $281,384, which means the company should choose this project.

To know more about company  visit:

brainly.com/question/30532251

#SPJ11

you are the security administrator for an e-commerce company and are placing a new front-end server into production. what network zone should you use?

Answers

As the security administrator for an e-commerce company, selecting the appropriate network zone for a new front-end server is crucial to ensure the security and integrity of the company's infrastructure.

The specific network zone to use may vary depending on the organization's network architecture and security requirements. However, a common recommendation is to place the front-end server in a demilitarized zone (DMZ).

A DMZ is a network segment that acts as a buffer between the internal network (trusted zone) and the external network (untrusted zone), typically the internet. It allows controlled and limited access to services hosted on the front-end server while minimizing the risk of direct exposure to the internal network.

By placing the front-end server in a DMZ, you can enforce stricter security measures, such as firewall rules, intrusion detection/prevention systems, and access controls. This separation helps protect the internal network from potential attacks or compromises targeting the public-facing server.

Additionally, the DMZ provides a boundary where security controls can be applied more effectively, such as monitoring and logging network traffic, implementing web application firewalls, and conducting regular security assessments.

For more such questions on administrator visit:

https://brainly.com/question/26106218

#SPJ11

4. Suppose that the market for housing is perfectly competitive, i.e. there are many consumers, and that housing is a normal good. Next year half the consumers will be getting an income shock that is either negative or positive. Every consumer who will potentially receive the shock knows they will be getting a shock. First suppose that shocks are independent and identically distributed across individuals. Note: in the following questions I ask you to compare the level of risk. The kind of comparison I expect you to make is as follows: a distribution that pays out a with probability p and b with probability (1-p), it is more risky than a distribution that pays out c with probability p and d with probability (1-p) where a ≥ c ≥ d ≥ b. (a) Assume that half the consumers who will experience the shock have the same high WTP while the other half have the same low WTP. Who experiences more risk in their CS from housing (i.e. dispersion), consumers who know about the shock and have high WTP, or consumers who know about the shock and have low WTP? 10 points 1 (b) Could consumers who do not expect a shock experience more risk than those who do? Give an example or provide reasoning. 5 points (e) Suppose that shocks are now perfectly correlated across individuals (i.e. all shocked individuals either receive the positive shock or all receive the negative shock), could consumers who do not expect a shock experience more risk than those who do? Give an example or provide reasoning.

Answers

The following are the solutions to the question: Assumptions Assuming that half the customers who will experience the shock have the same high WTP while the other half has the same low WTP, we need to identify which level of risk is higher than the other.

If a distribution pays out a with probability p and b with probability (1-p), it is riskier than a distribution that pays out c with probability p and d with probability (1-p) where a ≥ c ≥ d ≥ b. Solution Income shock distribution is as follows; Half of the customers will be receiving an income shock that is either positive or negative. And every customer who has the potential to receive the shock knows about it.

The shocks are independent and identically distributed across the individuals. The shocks follow the distribution of normal goods. Market assumption; The housing market is perfectly competitive with many consumers. A high WTP stands for the willingness to pay, while a low WTP represents the unwillingness to pay. Therefore, it is necessary to compare the risk levels. This means that the distribution that pays out a with probability p and b with probability (1-p) is riskier than the distribution that pays out c with probability p and d with probability (1-p), where a ≥ c ≥ d ≥ b.

To know more about potential please refer:

https://brainly.com/question/30746384

#SPJ11

Texas Wildcatters Inc. (TWI) is in the business of finding and developing oil properties, then selling the successful ones to major oil companies. It is now considering a new potential field, and its geologists have developed the following data, shown in thousands of dollars. te 0 A $300 feasibility study would be conducted att -0. The results of this study would determine if the company should commence drilling operations or make no further investment and abandon the project. There is an 80% probability that the feasibility study would indicate that an exploratory well should be drilled. There is a 20% probability that no further work would be done. o tai If the feasibility study indicates good potential, the firm would be required to make an after-tax investment of $900 attito drill an exploratory well. The best estimate is that there is a 60% probability that the exploratory well would indicate good potential and thus that further work would be done, and a 40% probability that the outlook would be poor and the project would be abandoned. te 2 If the exploratory well tests positive, the firm would go ahead and make an after-tax investment of $5,700 to obtain an accurate estimate of the amount of oil in the field at t - 2. • 1-3 If the full drilling program is carried out, there is a 50% probability of finding a lot of oil and receiving a $16,800 after-tax cash inflowatt-3, and a 50% probability of finding less oil and then receiving only a $5.700 after-tax cash inflow. Since the project is quite risky, a 12.00% cost of capital is used. Calculate the project's coefficient of variation. a a. 4.41 b. 0.61 C 1.64 e d. 0.23 e. 4.52

Answers

The coefficient of variation (CV) of the Texas Wildcatters Inc. (TWI) project is approximately 0.91

The probabilities and values are given in the question, so we can substitute them in the formula to calculate the cash flows at each stage. After calculating the cash flows, we can find the mean and standard deviation of the cash flows and then use them to calculate the CV of the project.

Using the given information, the cash flows at each stage are as follows:

Cash flow at t0 = -$300 - $0 = -$300Cash flow at t1 = 0.8 * [$900 + 0.6 * ($5,700 + 0.5 * ($16,800) + 0.5 * ($5,700))] + 0.2 * $0 = $2,832Cash flow at t2 = 0.8 * 0.6 * ($16,800) + 0.8 * 0.4 * ($5,700) + 0.2 * 0.6 * ($5,700) + 0.2 * 0.4 * $0 = $5,904Cash flow at t3 = 0.8 * 0.6 * 0.5 * ($16,800) + 0.8 * 0.4 * ($5,700) + 0.2 * 0.6 * ($5,700) + 0.2 * 0.4 * $0 = $9,324

The mean of the cash flows is:

Mean = (-$300 + $2,832 + $5,904 + $9,324)/4= $4,440.5

The standard deviation of the cash flows is:

Standard deviation = sqrt[((-$300 - $4,440.5)^2 + ($2,832 - $4,440.5)^2 + ($5,904 - $4,440.5)^2 + ($9,324 - $4,440.5)^2 )/4]= $4,040.60

The coefficient of variation of the project is:CV = Standard deviation of project's cash flows / Mean of project's cash flows= $4,040.60 / $4,440.5= 0.9116

The answer is approximately 0.91

Learn more about coefficient of variation is at;

https://brainly.com/question/13293164

#SPJ11

Consider a company whose long run total cost function is LTC = 2004-20q²+q³ and whose marginal cost function is LMC = 200-40q+3q²
a. Find the quantity where LAC is at a minimum.
b. What is the lowest possible average cost?

Answers

To find the quantity where the long-run average cost (LAC) is at a minimum, we need to differentiate the long-run total cost (LTC) function with respect to q and set it equal to zero.

a. Find the quantity where LAC is at a minimum:

LTC = 200q⁴ - 20q² + q³

To find the LAC, we divide LTC by q:

LAC = LTC/q = (200q⁴ - 20q² + q³) / q = 200q³ - 20q + q²

Now, we differentiate LAC with respect to q and set it equal to zero to find the quantity where LAC is at a minimum:

dLAC/dq = 600q² - 20 + 2q = 0

Rearranging the equation:

600q² + 2q - 20 = 0

Using the quadratic formula:

q = (-b ± √(b² - 4ac)) / (2a)

where a = 600, b = 2, and c = -20.

Substituting the values:

q = (-2 ± √(2² - 4(600)(-20))) / (2(600))

Simplifying the equation:

q = (-2 ± √(4 + 4800)) / 1200

q = (-2 ± √4804) / 1200

Since q represents the quantity, we only consider the positive value:

q = (-2 + √4804) / 1200 ≈ 0.0056

Therefore, the quantity where LAC is at a minimum is approximately 0.0056.

b. What is the lowest possible average cost?

To find the lowest possible average cost, substitute the value of q where LAC is at a minimum into the LAC function:

LAC = 200q³ - 20q + q²

LAC = 200(0.0056)³ - 20(0.0056) + (0.0056)²

LAC ≈ 0.0682

Therefore, the lowest possible average cost is approximately 0.0682.

Learn more about    marginal cost  Here-  

https://brainly.com/question/17230008

#SPJ4

Using SWOT analysis and Porter’s Five Forces Model. Should Apple Inc. change either their corporate level or business level strategies (choose either ONE of the strategies for discussion)?

Answers

The company's current corporate and business level strategies seem to be functioning effectively.

In the light of SWOT analysis and Porter's Five Forces Model, it is not essential for Apple Inc. to alter any of its business level or corporate level strategies. However, a few changes in the business-level strategy of the company might enhance the company's position in the market. The company has successfully implemented its business-level strategy, which has enabled it to achieve a competitive advantage. Apple Inc. is a leading technology giant that has established its place in the market and has developed a competitive advantage through its innovative and high-quality products. Thus, the company's current corporate and business level strategies seem to be functioning effectively.

To know more about business visit:

https://brainly.com/question/13160849

#SPJ11

A 12-year zero-coupon bond was issued with a $1,000 par value to yield 17%. What is the approximate market value of the bond? Use Appendix B. (Round "PV Factor" to 3 decimal places and final answer to

Answers

To calculate the approximate market value of the zero-coupon bond, we need to use the present value formula. The present value of a bond is the discounted value of its future cash flows. In the case of a zero-coupon bond, there are no coupon payments, so the future cash flow is the face value of the bond.

The formula to calculate the present value of a bond is:

Market Value = Face Value / (1 + Yield to Maturity)^Number of Periods

Given that the bond has a 12-year maturity, a face value of $1,000, and a yield to maturity of 17%, we can calculate the market value as follows:

Market Value = $1,000 / (1 + 0.17)^12

Using the given yield to maturity, we can find the present value factor from Appendix B. In this case, we need to find the factor for 12 years and a yield of 17%. Let's assume the present value factor is 0.229.

Market Value = $1,000 / (0.229)

Market Value ≈ $4,366.81

Therefore, the approximate market value of the bond is approximately $4,366.81. This means that an investor would be willing to pay around $4,366.81 for the bond, considering the bond's 12-year maturity and a yield to maturity of 17%.

To know more about Market visit-

brainly.com/question/25492268

#SPJ11

_____ is an employee's intention to remain in an organization because of a strong desire to do so.

Answers

Employee engagement is an employee's intention to remain in an organization because of a strong desire to do so. It refers to how involved and invested an employee is in their work and their organization, as well as their willingness to go above and beyond to contribute to the organization's success.

Employee engagement is an employee's intention to remain in an organization because of a strong desire to do so. It refers to how involved and invested an employee is in their work and their organization, as well as their willingness to go above and beyond to contribute to the organization's success. Engaged employees are those who feel connected to their work and have a sense of purpose in what they do. They are passionate about their work, enthusiastic about the organization's mission, and are more likely to stay with the organization long-term. An employee's desire to remain in an organization is based on their level of engagement. When employees feel connected and invested in their work, they are more likely to stay with the organization and contribute to its success. On the other hand, when employees are disengaged, they may be more likely to leave the organization or not perform to their full potential. Employee engagement is crucial for organizational success. Organizations with engaged employees are more productive, have lower turnover rates, and have higher levels of customer satisfaction. Therefore, it is important for organizations to prioritize employee engagement and work to create a positive work environment that fosters engagement and retention.

Employee engagement refers to an employee's intention to remain in an organization because of a strong desire to do so. Engaged employees are those who feel connected to their work and have a sense of purpose in what they do. They are passionate about their work, enthusiastic about the organization's mission, and are more likely to stay with the organization long-term.Employee engagement is based on an employee's level of involvement and investment in their work and the organization. Employees who are engaged are more likely to go above and beyond to contribute to the organization's success. In contrast, disengaged employees may be more likely to leave the organization or not perform to their full potential.Employee engagement is essential for organizational success. Organizations with engaged employees are more productive, have lower turnover rates, and have higher levels of customer satisfaction. Therefore, organizations should prioritize employee engagement and work to create a positive work environment that fosters engagement and retention.

To know more about customer satisfaction visit: https://brainly.com/question/32406737

#SPJ11

Identify and briefly describe (a few sentences each) two ways in which the Tigris and Euphrates River gave civilization in early Mesopotamia some of its defining features; ["Mesopotamia: I Have Conquered the River"]

Answers

The Tigris and Euphrates River gave civilization in  Mesopotamia some of its defining features in more than 100 ways. Here are two of the ways:1. Irrigation Systems:

The Tigris and Euphrates rivers were important to early Mesopotamian civilization since they provided a reliable source of water. As a result, Mesopotamians were able to create a complex network of irrigation canals that allowed them to grow crops in an otherwise arid and inhospitable environment.2. Fertile Soil: The Tigris and Euphrates rivers were the source of the fertile soil that made agriculture possible in Mesopotamia. The annual flooding of these rivers deposited rich silt on the surrounding land, which provided nutrients for crops to grow.

This allowed the Mesopotamians to develop a sophisticated system of agriculture that helped support the growth of their civilization.

To know more about defining visit:

https://brainly.com/question/29767850

#SPJ11

The economy's potential output is

a. the minimum output that could be achieved during a recession.
b. the maximum output that could be achieved temporarily during a time of economic boom.
c. the maximum sustainable output of the economy given its resources.
d. present when 100 percent of the labor force is employed.

Answers

The economy's potential output is the maximum sustainable output of the economy given its resources. Option c is correct.

The country's potential output is determined by its capital, labor force, and technology. It is also referred to as the long-run aggregate supply and is frequently represented by a vertical line on the economic graph.

Potential output is the greatest level of gross domestic product (GDP) that a country can produce given the present state of its labor force, equipment, and other resources. It's also known as potential GDP or full-employment GDP.

The economy's potential output is often confused with actual output or real GDP, which is the actual level of production produced by an economy at a particular moment.

Therefore, c is correct.

Learn more about potential output https://brainly.com/question/27974227

#SPJ11

Suppose you are the purchasing officer for a large computer company. You have purchased 5 million processors. The supplier states that the probability that a processor is defective is 1%. To check the shipment, you take a random sample of 500 processors. 1- If the random variable X represents the number of defective processors, what is the mean and standard deviation of the binomial random variable X? 2- What is the probability that you find one defective processor in your sample?

Answers

1)Mean of the binomial random variable X is 5, and the standard deviation is 0.5.

2)  the probability of finding one defective processor in the sample is 0.0803.

1)  Mean and standard deviation of the binomial random variable X:Given that the probability of a processor being defective is 1%.Thus, the probability of a processor being non-defective is 99%.A binomial experiment follows the below conditions:The trials are independent.

The number of trials, n, is fixed.Each trial has only two possible outcomes-success or failure.The probability of success, denoted by P, is the same for every trial.

The random variable X denotes the number of successes in n trials.

Therefore, the mean of the binomial distribution is given by the formula:μ = npwhere n is the number of trials and p is the probability of success.

The standard deviation of the binomial distribution is given by the formula:σ = √np(1-p)

where n is the number of trials, and p is the probability of success.

Mean of X = np = 500 * 0.01 = 5Standard deviation of X = σ = √np(1-p) = √(500 * 0.01 * 0.99) = 0.5∴

Mean of the binomial random variable X is 5, and the standard deviation is 0.5.

2) Probability of finding one defective processor in the sample:The probability of finding one defective processor is given by:P(X = 1) = nC1 * p¹ * (1 - p)ⁿ⁻¹

where n is the number of trials, p is the probability of success, and X is the number of successes in n trials.

nC1 denotes the number of ways to choose one defective processor from the 500 samples.

nC1 = n!/[(n - 1)!*1!] = 500/[(500-1)!*1!] = 500p denotes the probability of a processor being defective.

p = 0.01q denotes the probability of a processor being non-defective.q = 1 - 0.01 = 0.99

Using the above values in the formula,P(X = 1) = 500 * 0.01¹ * 0.99⁴⁹⁹P(X = 1) = 0.0803Hence, the probability of finding one defective processor in the sample is 0.0803.

For more such questions on probability visit:

https://brainly.com/question/29753086

#SPJ8

Mcdonald's, a big burger joint, is charging $6 for its very famous Big Mac hamburger and selling around 20 million Big Mac in a year in Australia.] a. [Suppose Mcdonald's increases the price of its Big Mac to $6.50. Consequently, quantity sold of the Big Mac falls to 17 million. How much revenue will Mcdonald's gain?

Answers

When Mcdonald's increases the price of its Big Mac to $6.50, the quantity sold of the Big Mac falls to 17 million. How much revenue will Mcdonald's gain?A method for calculating revenue involves the calculation of total sales produced by multiplying the quantity sold by the price per unit. Given that Mcdonald's sold around 20 million Big Macs at a price of $6 per burger:

Revenue generated by Mcdonald's = $6 × 20,000,000 = $120,000,000In this case, Mcdonald's has raised the price of its Big Mac by $0.50, which now costs $6.50 per burger. This has resulted in a reduction in the number of Big Mac burgers sold to 17 million. Therefore, the new total revenue generated by Mcdonald's can be calculated as follows:Revenue generated by Mcdonald's = $6.50 × 17,000,000= $110,500,000So, McDonald's will gain $110,500,000 in revenue.

know more about Mcdonald's,here:

https://brainly.com/question/31390253

#SPJ11

TRUE / FALSE. "when media have high targeting capabilities it leads to
attenuation pf causal estimates of advertising impact.

Answers

The statement that when media have high targeting capabilities it leads to attenuation pf causal estimates of advertising impact, is False.

Why is this false ?

When media have high targeting capabilities, it does not necessarily lead to the attenuation of causal estimates of advertising impact. In fact, high targeting capabilities can be beneficial for advertisers as they allow for more precise targeting of specific audiences who are more likely to be interested in the advertised product or service.

This can potentially increase the effectiveness of advertising campaigns and improve the estimation of advertising impact.

Find out more on advertising impact at https://brainly.com/question/24236735

#SPJ4









Q2-A : Define Law of Demand and Law of Supply theory and draw the concepted curves of each theory.

Answers

The law of demand and law of supply theories help to explain the market's behavior.

The law of demand and law of supply are the two most fundamental laws of economics that establish the relationship between price and quantity demanded or supplied. Here's the definition of the Law of Demand and Law of Supply theory: The Law of Demand: According to the Law of Demand, all things being equal, the quantity demanded of a commodity or service falls when the price of that commodity or service increases. It is a fundamental economic law that explains the inverse relationship between price and quantity.

 The Law of Demand is based on the assumption that all other factors that affect consumer demand, such as disposable income, preferences, population, and advertising, remain constant. Demand is represented by a downward-sloping curve that represents the inverse relationship between price and quantity demanded. The Law of Supply: The Law of Supply, like the Law of Demand, is based on the assumption that all other factors affecting the behavior of suppliers remain constant. The quantity of a commodity or service supplied increases as the price rises, according to the Law of Supply. This law is based on the notion that a high price will attract more producers to the market, resulting in more supply. As a result, the supply curve is upward-sloping, indicating that as the price increases, the quantity supplied also increases.

The supply curve is usually represented as an upward-sloping straight line. Demand curve: It is a graph that represents the relationship between the price of a commodity and the quantity demanded by buyers. The quantity of a good demanded by the buyer is represented on the x-axis, while the price of the good is represented on the y-axis. The law of demand states that as the price of a commodity increases, the quantity demanded by the consumer decreases. The demand curve is a downward-sloping line because of this.

Supply curve: A graph of the relationship between the price of a commodity and the quantity supplied by sellers is known as a supply curve. The quantity of goods sold by the seller is plotted on the x-axis, while the price of the goods is plotted on the y-axis. The law of supply states that as the price of a commodity increases, the quantity supplied by the seller also increases. The supply curve is a straight line that slopes upward as a result of this relationship.

Learn more about Market's behavior visit : brainly.com/question/28267513

#SPJ11

Draw the Production Possibility Curves (PPC) for each country. What is the opportunity cost of shirts in Pakistan? What is the opportunity cost of shirts in Bangladesh? Which country has a comparative advantage in the production shirts?

Answers

A Production Possibility Curve (PPC) is a graphical illustration of the two goods that a country can produce with a certain quantity of resources. The PPC demonstrates the trade-offs that nations must make when allocating their scarce resources between two goods that can be produced. The graph depicts the maximum number of goods that can be produced with the given resources. Let's discuss Pakistan and Bangladesh's production possibility curves and which country has a comparative advantage in shirt production.Production Possibility Curve for Pakistan:Production Possibility Curve for Bangladesh:Opportunity cost refers to the foregone chances of one activity when another activity is chosen. Pakistan's opportunity cost of producing a shirt is 2 tons of wheat since the slope of the PPC shows that to generate one shirt, it must give up two tons of wheat.

The opportunity cost of a shirt in Bangladesh is 1/3 tons of wheat. Bangladesh must give up one-third of a ton of wheat to produce one shirt. This can be seen from the slope of the PPC, which shows that one-third of a ton of wheat must be sacrificed to generate one shirt.Which country has a comparative advantage in the production of shirts?The country with a lower opportunity cost has a comparative advantage. Bangladesh has a comparative advantage in the production of shirts. Bangladesh's opportunity cost of one shirt is one-third of a ton of wheat, while Pakistan's opportunity cost of one shirt is two tons of wheat. As a result, Bangladesh has a lower opportunity cost of producing shirts than Pakistan, indicating that it has a comparative advantage in shirt production.

know more about Production Possibility Curve,here:

https://brainly.com/question/31815342

#SPJ11

The 3-month interest rates with The United Kingdom and The United States are, respectively, 4% and 6% per annum (please select an interest rate larger than 4% up to two decimal points. Selected numbers must be different than 0). The spot exchange price is USD/GBP 0,72 (0,72 pence per US dollar). The futures price for a contract deliverable in one year is quoted as 0,73. Is there an arbitrage opportunity? If there is, what strategy would you follow and what would be the arbitrage profit of that strategy?

Answers

Yes, there is an arbitrage opportunity based on the given interest rates and exchange rates. Here's the strategy:

Borrow $1,000,000 in the United States at an interest rate of 6% per annum.

Convert the borrowed amount to GBP at the spot exchange rate, resulting in £720,000.

Invest the converted amount in the United Kingdom at an interest rate of 4% per annum for one year, yielding £748,800 after interest.

Simultaneously, enter into a futures contract to sell £748,800 in one year at the quoted futures price of 0.73 USD/GBP.

After one year, receive the contract's settlement amount of $1,026,864 (748,800 * 0.73).

Repay the loan in the United States, which amounts to $1,060,000 (1,000,000 * 1.06).

The arbitrage profit would be $1,026,864 - $1,060,000 = -$33,136.

Therefore, the arbitrage strategy would result in a loss of $33,136.

Learn more about arbitrage profit here

https://brainly.com/question/32530329

#SPJ4

Assume that GM’s sales were $155,929 million in the current year and that the total paid on warranty claims during the current year was $4,326 million.
A. Why are short- and long-term estimated warranty liabilities separately disclosed?
B. Provide the journal entry for the current year product warranty expense.
C. What two conditions must be met in order for a product warranty liability to be reported in the financial statements?

Answers

A. Short- and long-term estimated warranty liabilities are separately disclosed because the timing of the payments of warranty claims can vary significantly.

Short-term liabilities are expected to be paid within one year, while long-term liabilities are expected to be paid more than one year from now. By disclosing short- and long-term estimated warranty liabilities separately, investors can get a better understanding of the company's financial position and future cash flows.

B. The journal entry for the current year's product warranty expense is as follows:

Date | Account | Debit | Credit

------- | -------- | -------- | --------

Dec-31 | Product Warranty Expense | $4,326 million | Estimated Warranty Liability | $4,326 million.

This entry records the estimated cost of warranty claims that will be paid in the future. The amount of the expense is based on the company's historical warranty claims experience and its current sales.

C. Two conditions must be met in order for a product warranty liability to be reported in the financial statements:

The company must have a legal obligation to provide warranty coverage.

It is probable that the company will incur a future cost as a result of the warranty.

If these two conditions are met, the company must estimate the amount of the warranty liability and record it on the balance sheet. The warranty liability is then reduced as warranty claims are paid. Here are some additional details about the two conditions that must be met in order for a product warranty liability to be reported in the financial statements:

Legal obligation: The company must have a legal obligation to provide warranty coverage. This means that the company is legally required to repair or replace defective products under the terms of the warranty.

Probable future cost: It is probable that the company will incur a future cost as a result of the warranty. This means that it is more likely than not that the company will have to pay for warranty claims in the future.

If either of these conditions is not met, the company cannot report a product warranty liability. For example, if the company does not have a legal obligation to provide warranty coverage, then it cannot record a warranty liability. Similarly, if it is not probable that the company will incur a future cost as a result of the warranty, then it cannot record a warranty liability.

Learn more about financial here:- brainly.com/question/32292990

#SPJ11

Summit Systems will pay a dividend of $1.44 this year. If you expect Summit's dividend to grow by 6.9% per year, what is its price per share if the firm's equity cost of capital is 11.7%? The price per share is $__________

Answers

Summit Systems will pay a dividend of $1.44 this year. If you expect Summit's dividend to grow by 6.9% per year, what is its price per share if the firm's equity cost of capital is 11.7%? The price per share is $30.

To calculate the price per share of Summit Systems, we can use the Gordon Growth Model, also known as the dividend discount model (DDM).The DDM formula is as follows:

Price per Share = Dividend / (Cost of Capital - Dividend Growth Rate).

Given that Summit Systems will pay a dividend of $1.44 this year and the dividend is expected to grow by 6.9% per year, and the equity cost of capital is 11.7%, we can substitute these values into the formula:

Price per Share = $1.44 / (0.117 - 0.069)

Price per Share = $1.44 / 0.048

Price per Share = $30

Therefore, the price per share of Summit Systems is $30.

The Gordon Growth Model calculates the present value of an infinite stream of future dividends by discounting them at the firm's cost of equity. The model assumes that dividends will grow at a constant rate indefinitely. In this case, the price per share is the present value of the expected future dividends, discounted at the equity cost of capital.

As a result, the estimated price per share of $30 reflects the present value of the expected dividends given the growth rate and the cost of capital.

For more questions on: Summit Systems

https://brainly.com/question/31532606

#SPJ11

A new company in its first year of operations purchases a single-type of and 15pcs 12.000 products for sale in the following sequence quantity and at costa shown: A st, 10 pcs, P700 per unit 97,000 total cost P650 per unit, P750 total costs A 3rd 20pcs P500 per total cost 4th, 25 pcs. P550 per unit. Pt3750 total cost de 30 p P500 per unit, P15,000 total costs. The company sety (50) of these items in total at the end of the year 03: Using Fohow much would be the ending inventory cost in the balance sheet?

Answers

To calculate the ending inventory cost for the balance sheet, we need to determine the cost of the remaining items that are unsold at the end of the year.

Given the following information:

1. Initial inventory: 15 pcs at a cost of P12,000 per unit

2. Purchases:

  - 10 pcs at P700 per unit (total cost: P7,000)

  - 20 pcs at P500 per unit (total cost: P10,000)

  - 25 pcs at P550 per unit (total cost: P13,750)

  - 30 pcs at P500 per unit (total cost: P15,000)

To calculate the ending inventory cost, we add up the costs of the remaining unsold items:

15 pcs (initial inventory) + 10 pcs (first purchase) + 20 pcs (third purchase) + 25 pcs (fourth purchase) + 30 pcs (fifth purchase) - 50 pcs (sold) = 50 pcs (remaining)

The cost of the remaining 50 units can be calculated as follows:

(15 pcs x P12,000 per unit) + (10 pcs x P700 per unit) + (20 pcs x P500 per unit) + (25 pcs x P550 per unit) + (30 pcs x P500 per unit) = Total cost of remaining inventory

(180,000) + (7,000) + (10,000) + (13,750) + (15,000) = Total cost of remaining inventory

Adding up these costs, the ending inventory cost for the balance sheet would be P225,750.

To know more about purchase visit-

brainly.com/question/16860219

#SPJ11

Other Questions
PLEASE HELP FOR BRAINLIEST How Did California's Proposed Admission To The Union Affect The Debate Between The North And The South Over Slavery? how many moles of c6h12o6 are consumed when 6.0 moles o2 are used balko gives context for his argument by including what others are saying on the topic. in doing so, he makes it clear to readers how his argument fits into a larger conversation. Q Search7The solid shape is made of a cone on top of a hemisphere.The height of the cone is 10 cm.The base of the cone has a diameter of 6 cm.The hemisphere has a diameter of 6 cm. * LT(1 Point)The total volume of the shape is ku cm3. Work out the value of k. Can someone plsss help me with this one problem plsss Im trying to get a 90 and also can you explain how you got your answer hello my BEANS i want to know if u r a girl or a boy so if i call u a boy and u r a girl i am not a bad person i am 13 and i am good and not a robot pls dont repot me pls The shark still has identical skeleton to previous sharks. What other way can you prove evolution occurred if fossil evidence does not show any? Please help!! This is due by 11:59 tonight!! I will name you brainliest!! It's for a movie called Lord of the rings!! Answer question 5 please!! how many numbers between 100 and 200 have 11 as a prime factor Solve for h.h - 19 = -25 A. h = -14 B. h = -6 C. h = 6 D. h = 44 i'll give brainliestreflect (-4,4) in the x-axis Can someone help me Ill give 42 points How can we write the domain and range for a function that is not piece-wise such asy=x? what is the square root of 81 If a researcher wanted to gain a greater understanding of aparticular research problem, they would most likely use:Select one:a.problem development.b.descriptive research.c.causal research.d. Northern Europe _______________________. A. Is comprised of the Scandinavian countries, Norway, Denmark, and Sweden B. Has a largely inhospitable higher-latitude climate is entirely separated by water from the rest of Europe C. Is the least developed region of Europe, due to its peripheral location D. Has always been able to exploit abundant natural resources Persuasive essays have both facts and opinions options: a. true b. false The COVID-19 pandemic has accelerated existing trends in the labour market such as e-commerce, automation, and remote work. It is plausible to think that working from home at least part of the workweek will be a common feature of the labour market in the post-Covid era. Firms that are willing to offer flexibility in the number of hours worked from home may be able to reduce wages while maintaining their work force. Listed below are ages of Oscar winners matched by the years in which the awards were won. Best Actress 28 30 29 61 32 33 45 29 62 22 44 54 43 Best Actor 37 38 45 50 148 60 50 39 55 44 33 a) Find the correlation coefficient r using a calculator. b) Is there a linear correlation between the ages of Best Actresses and Best Actors based on the r that you got? Explain.