Apply: Many gyms and health clubs have steam saunas, which are small steam-filled rooms. Traditionally, steam saunas have a container of heated rocks. A small ladle of water is poured on the rocks in order to make the steam.

1. Use what you have learned so far about heat transfer to explain how hot rocks can be used to make steam?

2. Why do you think only a small ladle-full of water is poured on the rocks at one time?

Answer:

These substances are called amphiprotic. Water, amino acids, hydrogen carbonate ions, and hydrogen sulfate ions are common examples.

Explanation:

A substance is amphoteric (from Greek amphoteros = "each of two") if it can act as an acid or a base.

For example, aluminum hydroxide is amphoteric because it can act as a base and neutralize strong acids.

Imagine A represents a heterogeneous mixture as it is a mixture composition that does not remain the same throughout the mixture whereas Imagine B represents a homogeneous mixture as it does not have any change or irregularity.

A homogeneous mixture is defined as having a fairly uniform form and composition, so many homogeneous mixtures are referred to as solutions whereas heterogeneous mixtures are defined as separate substances or phases. The three states or states of matter are gas, liquid and solid.

Some examples of mixtures that include mixtures of sand and water, mixtures of sugar and salt, and mixtures of lime juice and water.

In homogenous solution, particles are distributed uniformly and have uniform composition while in heterogenous solution, particles are distributed non-uniformly and have non-uniform composition

Thus, Imagine A represents a heterogeneous mixture as it is a mixture composition that does not remain the same throughout the mixture whereas Imagine B represents a homogeneous mixture as it does not have any change or irregularity.

Learn more about Homogenous mixture, here:

https://brainly.com/question/24898889

SPJ2

Answer:

see below

Explanation:

1. Heat energy is added to the substance, weakening the electrical attraction between molecules.

2. Both the melting point and boiling point are lower.

3. dipole

4. Water and ethanol have different molecular structures.

5. The lone pairs of electrons in the oxygen atom causes the molecule to be bent; the oxygen atom has a partial negative charge, while the hydrogen atoms have partial positive charges.

[quizlet: captncrun]

Heat is a form factor that changes the solid from light to light to gaseous mediums. The phases take place in a cyclic manner.

Hence the correct option is C.

Learn more about the phase change from solid to liquid occur in a substance

brainly.com/question/25664350.

Answer:

All of these properties are due to the chemical structure of the compound. The chemical structure includes the bonding angle, the type of bonds, the size of the molecule, and the interactions between molecules. Slight changes in the chemical structure can drastically affect the properties of the compound.

Explanation:

Hope it helps.

                     Please mark as brainliest.

Answer:Butane > ethane > methane, because between bigger molecules there are stronger van der Waals forces and also higher molar mass means they need to be given more energy to have enough kinetic energy to move quickly, freely in gas.

There are multiple butene isomers (Butene) and some (2-Butenes - cis and trans) actually have higher boiling point than n-Butane (there is also Isobutane, of course, with quite much lower boiling point than all of them) and some (1-Butene, Isobutylene) have lower, so this isn't really a fair or simple question. But on simplest level, it can again be said that 1-butene has lower boiling point because it has very similar shape but slightly lower molar mass (2H less) than n-butane.

Explanation:

Intermolecular forces such as dipole-dipole forces, London dispersion forces exist between molecules and these depend on strength of electronegativity of molecule. Therefore, methane converts to gas on boiling due to weak intermolecular forces of attraction between the molecules.

Intermolecular forces of attraction is force of attraction that make two molecule come closer. Intermolecular forces of attraction is directly proportional to the electronegativity of the molecule.

Size of electronegative molecule is small so, if any other molecule or molecule come into contact with this molecule then this molecule attract the electron of other molecule very efficiently and therefore the force between the molecule increases.

Molecules of methane have weak intermolecular forces of attraction. When energy is applied, the methane molecules easily break apart and turn into gas.

Therefore, methane converts to gas on boiling due to weak intermolecular forces of attraction between the molecules.

To learn more about intermolecular forces of attraction, here:

https://brainly.com/question/26701678

#SPJ2

Answer:

Explanation:

Behavior

Answer:

With ions of calcium in a cyclotron. This produced four atoms of moscovium. Moscovium is a synthetic element with the symbol Mc and atomic number 115. It was first synthesized in 2003 by a joint team of Russian and American scientists at the Joint Institute for Nuclear Research (JINR) in Dubna, Russia. In December 2015, it was recognized as one of four new elements by the Joint Working Party of international scientific bodies IUPAC and IUPAP. On 28 November 2016, it was officially named after the Moscow Oblast, in which the JINR is situated.[7][8][9]

Moscovium is an extremely radioactive element: its most stable known isotope, moscovium-290, has a half-life of only 0.65 seconds.[10] In the periodic table, it is a p-block transactinide element. It is a member of the 7th period and is placed in group 15 as the heaviest pnictogen, although it has not been confirmed to behave as a heavier homologue of the pnictogen bismuth. Moscovium is calculated to have some properties similar to its lighter homologues, nitrogen, phosphorus, arsenic, antimony, and bismuth, and to be a post-transition metal, although it should also show several major differences from them. In particular, moscovium should also have significant similarities to thallium, as both have one rather loosely bound electron outside a quasi-closed shell. Over a hundred atoms of moscovium have been observed to date, all of which have been shown to have mass numbers from 286 to 290.

Explanation:

Hope this helps u please make brainlyest

Using calcium ions in a cyclotron. As a result, four moscovium atoms were created. Moscovium is a man-made element with the atomic number 115 and the symbol Mc

Heavy ion collisions in particle accelerators have intentionally produced element 115, also known as Moscovium. So far, about 100 atoms have been seen.

At the Joint Institute for Nuclear Research (JINR) in Dubna, Russia, a team of Russian and American scientists initially created it in 2003.

It was acknowledged as one of four new elements by the Joint Working Party of the worldwide scientific organisations IUPAC and IUPAP in December 2015. It was formally named after the Moscow Oblast on November 28, 2016.

Thus, Element 115 i.e. moscovium was created using calcium ion of cyclotron.

To learn more about element 115 follow the link below;

https://brainly.com/question/14679547

#SPJ2

Answer:

The cork cell

Explanation:

Answer:

Sulfuric acid.

The sulfuric acid can react with common salt to produce Na2SO4, and after that you add CaCO3 and carbon to get Na2CO3

Answer:

Copper is reddish brown color

Its density is 8.93 g cm-3

highly malleable at ordinary temp, but is brittle near its melting point

god conductor of heat and electricity

Explanation:

Answer:

17 g/Mol

Explanation:

To determine the molar mass of any compound, you have to add up the molar masses of every atom that make up the respective compound. In this case NH3 equals one nitrogen atom and three hydrogen atoms.

What does that mean? Ammonia's molar mass will be the sum of the molar mass of one nitrogen atom and 3 times the molar mass of a hydrogen atom.

Peroindic table:

N=14.0067 g/mol.

H=1.00794 g/mol

Answer:

What is cyclobutane empirical formula : C4H8

Explanation:

The energy of the photon with a frequency of 9.50×10¹³ Hz is 6.29×10¯²⁰ J

From the question given above, the following data were obtained:

Frequency (f) = 9.50×10¹³ Hz

Planck's constant (h) = 6.626×10¯³⁴ Js

The energy of the photon can be obtained as follow:

E = hf

E = 6.626×10¯³⁴ × 9.50×10¹³

Therefore, the energy of the photon is 6.29×10¯²⁰ J

Learn more: https://brainly.com/question/7957705

Considering the IUPAC name, the common name for N₂O is nitrous oxide

IUPAC (International Union of  Pure and Applied Chemistry), is the recognized authority in the development of standards for the naming of  chemical compounds, through their Interdivisional Commitee on Nomenclature and Symbols.

The  IUPAC name to N₂O is nitrous oxide. Nitrous oxide is commonly known as the laughing gas is a colorless gas with a pleasant, sweetish odor and taste that, when breathed, causes placidity to pain.

Learn more:

Answer:

on e2020 the first one is dinitrogen monoxide second one is nitrous oxide

Explanation:

The answer is Electronegativity.

Answer:

Matter can be broken down into two categories: pure substances and mixtures. Pure substances are further broken down into elements and compounds. Mixtures are physically combined structures that can be separated into their original components. A chemical substance is composed of one type of atom or molecule.

Hope this helps :)

Answer: here is a description of what they look like since I cannot see the diagram.

Mitochondria- wavy line

Ribosomes- little dots

Chromosome- X

Nucleus- Circle with bite taken out of it

Endoplasm- Bubble

Nuclear membrane- Outer layer/bubble

Golgi-wavy circle thing

Vacuole- Bigger circle (but not nucleus)

Cytoplasm- its the jelly on the inside

Cell wall- only in plant cells, looks like a box

Cell membrane- The outmost part of the animal cell, the barrier.

I sure hope this helps!!!

Answer:liters

Explanation:

Answer:

b

Explanation:

The number of moles of XeF4 that can be created would be 0.5 moles.

From the equation of the reactiobn:

                Xe (g) 2 F₂ (g) ---> XeF₄ (g)

The mole ratio of Xe to F2 is 1:2. Hence, in the presence of 1 mole Xe and 1 mole F2, F2 would be limiting the reaction.

This means that the amount of F2 would determine the amount of XeF4 that would be produced from the reaction.

The mole ratio of F2 to XeF4 according to the equation is 2:1. This means that for every 1 mole of F2 introduced into the reaction, 0.5 moles of XeF4 will be produced.

In this case, 1 mole of F2 is introduced. Thus, the mole of XeF4 that would be produced would be:

                       1/2 = 0.5 moles.

More on stoichiometric calculations can be found here: https://brainly.com/question/8062886?referrer=searchResults

Answer:

metals, 88 , periodic table , luster , heat, electricity , thin, right, opposite , appearance , luster  , malleable , ductile, opposite , shiny, moderately

Explanation:

metals, 88 , periodic table , luster , heat, electricity , thin, right, opposite , appearance , luster  , malleable , ductile, opposite , shiny, moderately Is the answer.

(Hope this helps can I pls have brainlist (crown)☺️)

Answer:

C. the length of the string

Explanation:

Answer:

C. the length of the string

Explanation:

Explanation:

i need to do it or what do i nedd

Answer:

Creating A Wave w/ rope

1 . The wave I created is a transverse wave, this is because the wave was moving in a perpendicular direction.

2. 20 Meters

3. 60 Hz

4. 1200 m/s

Creating A Wave w/ a slinky

1. The wave I created was a longitude wave, this is because the wave was moving parallel and the medium was going left.

2. 2 meters

3. 123 Hz

4. 246 m/s

Explanation:

I rally hope this helps you!!

Happy holidays!! <33

Bond number

The characteristic of reactions that depends on valence electrons is the bond type.

In chemistry, a chemical bond could be;

Ionic

Covalent

The type of bond formed depends on the number of valence electrons present. When there are few valence electrons on an atom, it mostly forms ionic bonds.

When there are more electrons on an atoms, it mostly forms covalent bonds and the electrons between the atoms are shared.

Answer:

The phospholipids would form a normal bilayer. The phospholipid tails would orient toward the solution, and the heads would cluster away from the solution.

Explanation:

i hope this helps you!

This problem is providing information about the volume and concentration of HCl as 505 mL and 0.160 M respectively, and it is asking for the water that have to be added to prepare a 0.100-M solution.

In such a way, we work over the assumption of constant moles in dilution processes, so that we are able to write:

[tex]M_1V_1=M_2V_2[/tex]

Which relates de volume and concentration at the beginning and end of the experiment. This means we can solve for the resulting volume of the solution as a first calculation:

[tex]V_2=\frac{M_1V_1}{M_2}\\\\V_2=\frac{0.160M*505mL}{0.100M}=808mL[/tex]

Hence, the following amount of water must be added:

[tex]V_w=808mL-505mL=303mL[/tex]

Learn more:

English:

"Human activities contribute to climate change by causing changes in Earth's atmosphere in the amounts of greenhouse gas- es, aerosols (small particles), and cloudiness. The largest known contribution comes from the burning of fossil fuels, which releases carbon dioxide gas to the atmosphere." (ei.lehigh.edu)

Have a nice day!

  I hope this is what you are looking for, but if not - comment! I will edit and update my answer accordingly. (ノ^∇^)

- Heather

/

Español:

"Las actividades humanas contribuyen al cambio climático al provocar cambios en la atmósfera de la Tierra en las cantidades de gases de efecto invernadero, aerosoles (partículas pequeñas) y nubosidad. La mayor contribución conocida proviene de la quema de combustibles fósiles, que libera dióxido de carbono a la atmósfera." (ei.lehigh.edu)

¡Que tenga un lindo día!

  Espero que esto sea lo que estás buscando, pero si no, ¡comenta! Editaré y actualizaré mi respuesta en consecuencia. (ノ^∇^)

- Heather

Answer:

The surface temperature of a star determines the color of light it emits. Blue stars are hotter

hope this helps :)